Search

To determine the occurrence of mineral oil hydrocarbons (MOH) in food contact papers in China, and to investigate the potential sources of MOH contamination, a total of 159 food contact papers and raw materials were analysed by off-line solid-phase extraction-gas chromatography flame ionisation detection (SPE-GC-FID) and a GC-MS method. The migration of MOH from food contact papers into Tenax, olive oil or 50% ethanol under the worst foreseeable conditions of use was determined. The results indicated that the occurrence of MOH in China is of a potential health risk concerning the migration of mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH) which were detected in 82.6% and 50.4% of samples, respectively. Migration of MOSH from 47.9% of samples was higher than 2 mg/kg and migration of MOAH from 32.2% samples exceeded 0.5 mg/kg in case of the worst foreseeable condition of use. The highest mean migration of MOSH and MOAH were found in packaging papers for long-term storage (more than 6 months), with mean migration of 91.2 mg/kg and 1.4 mg/kg, respectively. Migration of MOH from printed paper was considerably higher than that of unprinted paper, validating previous findings that the printing ink is the predominant source of MOH contamination in food contact papers. Migration of MOH from paper bowls used for packing instant noodles was relatively low, suggesting the internal hollow layer may be acting as a functional barrier that could block the transfer of MOH (up to C28) through the gas phrase, even though the outer layer was made from recycled paper. High concentrations of MOSH and MOAH were also detected in de-foamers, adhesives and rosin sizing agents, indicating that the MOH contamination caused by the use of raw materials and additives should also be taken into consideration. [ABSTRACT FROM AUTHOR]

Mineral oil hydrocarbons (MOH) are widely used in the food industry for applications such as printing inks, additives, adhesives, and processing aids for food additives. Recently, the migration of MOH from food contact paper and board into foods has raised public health concerns. In this study, a total of 110 food contact paper and board samples, including baking and cooking paper (23), baking cups (28), food packaging bags (22), lunch boxes (8), party plates (26), and straws (3) were evaluated to quantify the content and short-term migration levels of MOH. The MOH were separated into mineral oil saturated hydrocarbons (MOSH)/polyolefin oligomeric saturated hydrocarbons (POSH) and mineral oil aromatic hydrocarbons (MOAH) via a validated on-line liquid chromatography−gas chromatography−flame ionisation detection (LC–GC–FID) technique. The coating materials of the sample products comprised polyethylene, polypropylene, polyethylene terephthalate, and silicone. The effects of the coating materials on the content and migration of MOH/POSH were evaluated. Quantitative analysis of the MOH in the samples showed that the MOSH/POSH and MOAH content varied widely, ranging from 16 to 5626 mg kg−1 for MOH, regardless of the coating materials. Short-term migration of MOSH/POSH was observed only in samples with polyolefinic coatings, such as polyethylene and polypropylene, in experiments conducted at 25 °C for 10 min, although the extent of MOAH migration for all samples was at the trace level. The migration of MOSH/POSH was detected within the range of 0.93 to 62.3 μg L−1 in 22 samples, and the migration of MOAH was detected within the range of 0.80 to 2.6 μg L−1 in only 4 samples. These results demonstrate that although the short-term migration potential of MOH is generally negligible, the migration of MOSH/POSH into wet fatty foods can be accelerated by polyolefinic coatings, even within a very short time. [ABSTRACT FROM AUTHOR]

The ability to pattern highly conductive features on paper substrates is critically important for applications in radio frequency identification (RFID) tags, displays, sensors, printed electronics, and diagnostics. Ink-jet printing particle-free reactive silver inks is an additive, material efficient and versatile strategy for fabrication of highly conductive patterns; however, the intrinsic wetting properties of cellulose based papers are not suitable to serve as substrates for this process. This study reports one-step and practical modification of the surface of paper substrates using industrially available materials. The paper substrates were dip-coated with films of hydrocarbon and fluorocarbon based polymeric resins. Ink-jet printing particle-free reactive silver inks on the modified paper substrates followed by fast thermal annealing resulted in highly conductive patterns. The coatings improved the conductivity of the patterns and reduced the number of printing layers required to obtain conductivity. We finally demonstrated fabrication of a printed RFID tag on the coated paper substrates operating at the frequency range of 865–870 MHz. [ABSTRACT FROM AUTHOR]

The occurrence of mineral oil hydrocarbons (MOH) in cellulose-based packaging is mainly due to the offset printing process where MOH are used as a ink pigments' solvent. The MOH migration from paper/paperboard to food is matter of concern for EFSA, members state authorities, consumers, and food industry. In this study, the feasibility to stabilize MOH by adding a sorbent into recycled paper obtained through a common washing process was investigated and the migration to wheat flour/Tenax assessed. Among several white/pale yellow porous materials, organo-modified powder silica MCM-41-Si(CH) showed the best combination between affinity for MOH (184% dw) and stability to thermal regeneration. A freshly issued newspaper with >3000 mg MOH kg was used to produce recycled paper at a laboratory-scale plant. MCM-41-Si(CH) was added at the pulping step (1% dw) and the sorbent-enriched pulp handled according to a washing paper production process with no effect on the paper optical brightness. The MOH content of the wheat flour in contact with the sorbent-enriched paper under accelerated migration conditions (15 days at 40 °C) resulted 20% of that contacted with control paper (4.3 ± 1.1 and 20.4 ± 5.5 mg kg, respectively), despite its contamination was 24% higher than the control. On the contrary, Tenax contamination resulted 56.0 ± 10.0 and 47 ± 14.0 mg kg when exposed to sorbent-enriched and control paper, respectively. [ABSTRACT FROM AUTHOR]

Abstract: A papermaking technique with a dual polyelectrolyte retention system was used for the preparation of NaY zeolite-containing papers, which implied the use of cationic and anionic polymers. Two kinds of fibers were employed, either cellulosic or ceramic ones, and accordingly papers with different characteristics were obtained: those that only contained cellulosic fibers for low temperature applications, cellulosic papers, and those prepared using both cellulosic and ceramic fibers – ceramic papers – for high temperature applications. Although a decrease in their mechanical properties due to calcination was observed, zeolitic ceramic papers resulted easy to handle for practical applications. Zeolite was quantified through BET surface area measurements. SEM images indicated a good dispersion of zeolite particles within the cellulosic paper whereas in the ceramic paper they appeared anchored on ceramic fibers. The zeolitic papers prepared resulted efficient as toluene sorbents, the adsorption capacities of zeolitic ceramic papers being higher than those of zeolitic cellulosic papers. In the case of zeolitic cellulosic papers, the amounts of released toluene were lower than those of adsorbed toluene, implying that the treatment up to 160°C did not completely eliminate the hydrocarbon. Also, TPD profiles showed that toluene is chemically retained up to high temperatures (ca. 420°C) in zeolitic ceramic papers. Toluene adsorption values demonstrate that zeolite dispersed into the cellulose/ceramic matrix is as effective as powder massive zeolite in retaining the hydrocarbon, which highlights the potential application of these zeolitic structures as sorbent materials both for low and high temperatures. [Copyright &y& Elsevier]

Obligate social parasite insects are specialized in exploiting the parental service of the workers of another social species by invading their colonies. As social insects are usually aggressive towards intruders, social parasites have to circumvent the host’s nestmate recognition system to enter the host colony successfully. Many studies on paper wasps have shown that, after host nest invasion, Polistes social parasites change their chemical profile to match the host’s odour, thus allowing their acceptance into its colony. However, a social parasite’s usurpation strategy may benefit from signals that reduce or eliminate the aggression of the host. We used lure presentation experiments to investigate whether Polistes sulcifer, a social parasite of the paper wasp P. dominulus, is able to reduce the aggressive reaction of its host. We found that the parasite lure elicited lower host aggressiveness than the conspecific lure, suggesting that parasite species have evolved cues able to inhibit host aggressiveness. We investigated separately the effects of chemical and visual patterns on host aggressiveness. The lower host reaction to the parasite lure was not due to chemical cues, but was elicited by the visual facial pattern of the parasite. Experimental manipulation of this visual pattern demonstrated that the black lower part of the clypeus of the parasite is the trait able to reduce host aggression. This pattern can be considered an honest signal since it visually amplifies the mandibular width, giving information about the parasite’s dangerousness. [Copyright &y& Elsevier]

A previously uncultured Propionibacterium was isolated from a highly diluted sample (10−6 mL) of activated sludge of paper mill effluent. The isolate MOB600 was able to grow on anisole, phenetole, benzene, toluene, phenol, styrene and biphenyl, although it used only limited carbon sources in the minimal media. The partial DNA sequence of 16S ribosomal RNA gene was 93% identical to Luteococcus peritoni CCUG38120 as the closest neighborhood in the family Propionibacteriaceae. Strain MOB600 produced 2-methoxyphenol and 2-ethoxyphenol seemingly in an unproductive pathway from the degradation of anisole and phenetole, respectively. It had a substrate preference to favor 3-alkoxyphenols over 2-alkoxyphenols. Formation of 3-hydroxylated O-aryl alkyl ether was substantially proved by the nearly 1:1 biotransformation of substrate-analogous 1,2-methylenedioxybenzene to 3,4-methylenedioxyphenol (sesamol) showing end-product inhibition. The strain converted 2-/3-methoxyphenols to 3-methoxycatechol. The extradiol ring fission of 3-methoxycatechol appeared to take place in the production of a yellow-colored 2-hydroxymuconate derivative, thereby being able to release methanol spontaneously. High specificity polymerase chain reaction screening for bacterial dioxygenases revealed that the genomic DNA encoded at least three ring-hydroxylating dioxygenase large subunits. Being consistent with substrate availability for this strain, the obtained sequences were closely related to large subunits of an isopropylbenzene 2,3-dioxygenase, a benzene 1,2-dioxygenase, a biphenyl 2,3-dioxygenase, a benzoate 1,2-dioxygenase and a putative dioxygenase in Rhodococcus strains. Our results demonstrate that strain MOB600 may play a major role in the degradation of lignin-like O-aryl alkyl ethers and various aromatic hydrocarbon pollutants in activated sludge of paper mill effluent. [Copyright &y& Elsevier]

Climate change, and the need to wean the world off hydrocarbon sources of energy, will have a significant impact on the hydrocarbon industry, an industry worth hundreds of billions of dollars annually, and which has been in existence for over a century. Even though the phasing out of hydrocarbons as an energy source is inevitable, the demise of the hydrocarbon industry is not. This study, demonstrates that the hydrocarbon industry can make a significant contribution as the world transitions to low carbon energy. in this paper, we discuss the role of the hydrocarbon industry in developing a new hydrogen industry, demonstrating how the industry's know how will be vital in the development, construction, and delivery of both blue and green hydrogen to an energy hungry world. [ABSTRACT FROM AUTHOR]

Graphical abstract Highlights • Stepwise pyrolysis at 350 and 500 °C can separate products into two fractions. • First step liquid product was acidic and had high amounts of oxygenated compounds. • Products from the second step had high hydrocarbon contents and low acidity. • Interaction between cellulose and plastics during stepwise pyrolysis was observed. • Test on real wastes and discussion of scaling-up possibilities were presented. Abstract Mixed plastics and papers are two of the main fractions in municipal solid waste which is a critical environmental issue today. Recovering energy and chemicals from this waste stream by pyrolysis is one of the favorable options to achieve a circular economy. While pyrolysis products from plastics are mainly hydrocarbons, pyrolysis products from paper/biomass are highly oxygenated. The different nature of the two pyrolysis products results in different treatments and applications as well as economic values. Therefore, separation of these two products by multi-step pyrolysis based on their different decomposition temperatures could be beneficial for downstream processes to recover materials, chemicals and/or energy. In this work, stepwise pyrolysis of mixed plastics and paper waste was performed in a batch type fixed bed reactor using two different pyrolysis temperatures. Neat plastic materials (polystyrene, polyethylene) and cellulose mixtures were used as starting materials. Then, the same conditions were applied to a mixed plastics and paper residue stream derived from paper recycling process. The condensable products were analyzed by GC/MS. It was found that pyrolysis temperatures during the first and second step of 350 and 500 °C resulted in a better separation of the oxygenated and hydrocarbon condensates than when a lower pyrolysis temperature (300 °C) was used in the first step. The products from the first step were derived from cellulose with some heavy fraction of styrene oligomers, while the products from the second step were mainly hydrocarbons derived from polystyrene and polyethylene. This thus shows that stepwise pyrolysis can separate the products from these materials, although with some degree of overlapping products. Indications of interaction between PS and cellulose during stepwise pyrolysis were observed including an increase in char yield, a decrease in liquid yield from the first temperature step and changes in liquid composition, compared to stepwise pyrolysis of the two materials separately. A longer vapor residence time in the second step was found to help reducing the amount of wax derived from polyethylene. Results from stepwise pyrolysis of a real waste showed that oxygenated and acidic products were concentrated in the liquid from the first step, while the product from the second step contained a high portion of hydrocarbons and had a low acid number. [ABSTRACT FROM AUTHOR]

We report the unprecedented electrocatalytic activity of a series of molecular nickel thiolate complexes (1–5) in reducing CO2 to C1–3 hydrocarbons on carbon paper in pH‐neutral aqueous solutions. Ni(mpo)2 (3, mpo=2‐mercaptopyridyl‐N‐oxide), Ni(pyS)3− (4, pyS=2‐mercaptopyridine), and Ni(mp)2− (5, mp=2‐mercaptophenolate) were found to generate C3 products from CO2 for the first time in molecular complex. Compound 5 exhibits Faradaic efficiencies (FEs) of 10.6 %, 7.2 %, 8.2 % for C1, C2, C3 hydrocarbons respectively at −1.0 V versus the reversible hydrogen electrode. Addition of CO to the system significantly promotes the FEC1–C3 to 41.1 %, suggesting that a key Ni−CO intermediate is associated with catalysis. A variety of spectroscopies have been performed to show that the structures of nickel complexes remain intact during CO2 reduction. [ABSTRACT FROM AUTHOR]

In this study, a mixture of waste plastics and papers were pyrolyzed under mild conditions in batch and tubular reactors. The decomposition reactions were enhanced by the use of synthetic zeolite-based catalysts to obtain a higher yield of volatiles and modifying the product composition. Especially the decomposition reactions and the product properties obtained from the different reactors were compared. Gases were analysed by GC-FID and GC-TCD. This fraction contains hydrogen, carbon-monoxide, carbon-dioxide and hydrocarbons. The pyrolysis oils have oxygen-containing compounds, such as alcohols, aldehyde, ketones, carboxylic acids or phenol and its derivative. Not only the reactor configurations but also the catalysts had an effect to the product properties, because the catalysts with alkali characters showed advanced behaviour in the reduction of oxygenated hydrocarbons, while high synthetic zeolite catalysts can increase the saturation and isomerization reactions. The long-term behaviour of the pyrolysis oils was followed by an accelerated aging test at 80 °C till 7 days. The catalysts can effectively reduce the rate of density and viscosity increase during the aging and the alkali catalysts showed beneficial properties in reducing the acidic components. In general, the aging properties were more favorable for pyrolysis oils obtained from the tubular reactor compared with the results in batch reactor. • Co-pyrolysis of plastic and paper wastes were investigated. • Better product properties could be obtained from tubular reactor. • Batch process can supported the in-situ saturation of olefins. • High alkali content catalysts can improve the corrosion properties of light oils. • Light oils had high TAN and can occur very low weigh loss. [ABSTRACT FROM AUTHOR]

In this study, the influences of ultrasonic pretreatment factors (frequency, power, treatment time) on blends of municipal solid waste (MSW) and paper sludge (PS) with additive (MgO) was explored, through orthogonal experiments design. The optimum operating condition wanted to be acquired. However, for the ultimate (H/C) and ash analysis after pretreatment, solid residue mass and oxygenates compounds contents in products, the influences of factors were in different results. With adding PS unceasingly, the contents of hydrocarbon compounds decreased. And the ultrasonic pretreatment had the obvious influence with high PS percentage. Longer treatment time resulted to the lower content of oxygenates compounds. After adding MgO, the residue mass reduced, which meant MgO had the catalytic action, and the oxygenates compounds content reduced only with 100 kHz, which had the sonochemical effect. [ABSTRACT FROM AUTHOR]

Multi-wall carbon nanotubes (MWCNTs) have been synthesized on a carbon fiber paper (CFP) via a simple surface reaction of hydrocarbon decomposition using nickel nanoparticles as catalysts at 1023 K. Pd nanoparticles supported on MWCNTs/CFP are used as electrocatalysts for ethanol electrooxidation in alkaline media. The results shows that the Pd/MWCNTs/CFP electrocatalyst gives higher reaction activity and more stable performance than the commercial Pd/C and Pd/CFP electrocatalyst for ethanol oxidation in alkaline medium. [ABSTRACT FROM AUTHOR]

Chemical communication is necessary to induce aggregation and to maintain the cohesion of aggregates in Periplaneta americana (L.) cockroaches. We aimed to identify the chemical message inducing aggregation in this species. Two types of bioassays were used--binary choice tests in Petri dishes and tests in Y-olfactometer. Papers conditioned by direct contact of conspecifics induce aggregation when proposed in binary choice tests and were attractive in a Y-olfactometer. The identification of the molecules present on these conditioned papers indicated that dichloromethane extracts contained mainly cuticular hydrocarbons whereas methanol extracts contained more volatile molecules. Only a mixture of extracts in both solvents induced aggregation. High concentrations of cuticular hydrocarbons are necessary to induce aggregation when presented alone. When presented with volatile molecules present in methanol extracts, low concentrations of cuticular hydrocarbons are sufficient to induce aggregation if they are presented in contact. Among volatile molecules collected on filter paper, a mixture of three compounds--hexadecanoic acid, pentadecanoic acid, and pentaethylene glycol--induced aggregation. Our results provide evidence that aggregation processes in P. americana relies on a dual mechanism: attraction over long distances by three volatile molecules and maintenance on site by contact with cuticular hydrocarbons. [ABSTRACT FROM AUTHOR]

Insect social life is governed by chemicals. A great number of studies have demonstrated that the blend of hydrocarbons present on the cuticle (CHCs) plays a pivotal role in intra- and inter-specific communication. It is not surprising, therefore, that social parasites, specialized in exploiting the costly parental care provided by host workers, exploit the host chemical communication system too. Throughout their life cycle, social parasites intercept and break this CHC-based code. Recently, however, several polar compounds (mainly peptides) have been found in addition to CHCs both on the cuticle and on the comb surface of social insects, and their semiochemical role has been demonstrated in some circumstances. In the present study, we used the paper wasp social parasite-host system Polistes sulcifer (Zimmerman)-Polistes dominulus (Christ) to evaluate the relative importance of the CHC5 and polar compounds in two different steps of the host exploitation process: host nest detection by the pre-usurping parasite and parasite chemical integration into the host colony. After separating the polar and apolar fractions of the host nest as well as those of pre- and post-usurpation parasites, we carried out laboratory assays based on the binary choice model. Our results show that nest polar compounds neither are used by the parasite to detect the host's nest nor play a role in parasite chemical integration into the host colony. In contrast, we demonstrate that CHCs are fundamental in both steps, thus confirming their primary role in social insect life and consequently in social parasite-host interactions. [ABSTRACT FROM AUTHOR]

Evaluates the role of hydrocarbon classes to define the recognition signature within the cuticular chemical profile of paper wasps. Effect of linear alkanes and alkenes on recognition response; Influence of the augmentation of a single alkene or methyl-branched alkane found on the cuticle on the recognition of the signature; Effect of genetic and environmental differences on epicuticular lipids.

Abstract: Architectonics of the paper-structured catalyst for the application to the biofuel reformer or direct internal reforming SOFC (DIRSOFC) was studied. Inorganic fiber network, “paper”, composed of yttria-stabilized zirconia (YSZ) fiber (Zf), alumina fiber (Af) and inorganic binder (Al2O3 sol (As) or ZrO2 sol (Zs) or CeO2 sol (Cs)) was prepared by a simple paper-making process. Then, the catalytic activities of the Ni and Ni–MgO loaded papers called “paper-structured catalysts (PSCs)” for the steam reforming of biodiesel fuels (BDFs) were evaluated. Ni–MgO loaded PSC using Cs as an inorganic binder, Ni–MgO/ZfAfCs, exhibited excellent performance over Ru/γAl2O3 catalyst beads. Formation of light hydrocarbons, especially C2H4, was eliminated and water–gas shift reaction was more promoted compared to the catalyst beads. [Copyright &y& Elsevier]

Based on recent developments, hydrogen-based combustion systems have received wide attention, mainly due to increasing awareness of enduring environmental pollutants and restricted access to fossil fuel usage. In the relevant literature, there are evidences of the possibilities on the partial or total replacement of hydrocarbon fuels with hydrogen in power plants and vehicle engines. However, some challenging issues particularly on hydrogen storage are remained to be resolved. This paper reviews and comments on addressing the effectiveness of hydrogen-enrichment on the engines and burners׳ performance includes the chemical kinetic analysis, the flame propagation structures and the effects of inhibitors on global burning velocity of hydrogen–hydrocarbon mixtures in different combustion bombs, chambers and vessels. It is recommended that future researches should aim towards the different application of hydrogen–hydrocarbon i.e. transportation and clean energy carrier. [ABSTRACT FROM AUTHOR]

Methods were developed to coat Whatman No. 1 filter paper for the extraction of polycyclic aromatic hydrocarbons (PAHs) from water. The filter paper samples were coated using solutions of poly(hydrogenmethylsiloxane) and dichlorodimethylsilane. The coated paper samples were tested for extraction of polar aromatic compounds and polycyclic aromatic compounds from aqueous solutions. The extracted compounds were detected using solid-matrix fluorescence (SMF) and solid-matrix phosphorescence (SMP). Also, the limits of detection and effective partition coefficients for the compounds were calculated for the coated papers. The limits of detection and effective partition coefficients were compared to those obtained using 1PS paper as an extraction medium. Both coated filter paper samples were shown to be more effective than Whatman 1PS for extraction of polycyclic aromatic hydrocarbons. However, the paper treated with poly(hydrogenmethylsiloxane) gave the best extraction properties and a limit of detection of 29 fmol/ml for benzo[e]pyrene. The paper coatings were characterized using near- and mid-infrared reflectance spectroscopy. In addition, 1PS paper was determined to contain 1.04 wt.% poly(dimethylsiloxane) (PDMS). [Copyright &y& Elsevier]

Abstract: In this study, performance of solid oxide fuel cell (SOFC) connected with paper-structured catalyst (PSC) was evaluated in the direct feed of wet oleic fatty acid methyl ester (oleic-FAME, C19H36O2), which is a mono-unsaturated component of practical biodiesel fuels (BDFs), in the steam to carbon ratio (S/C) range between 2.0 and 3.5, and high current density of 1 A cm−2 (at 0.7 V) was recorded at 800 °C. Long term stability of oleic-FAME fueled SOFC was achieved by the incorporation of PSC into SOFC even under severe operating condition prone to coking (direct feed of unsaturated hydrocarbon with carbon number 19 and low S/C ratio of 2.0). After 100 h test, coking was not observed in both SOFC anode and PSC. [Copyright &y& Elsevier]

Abstract: The aliphatic and polycyclic aromatic fractions of dust collected in the vicinity of recycled paper processing operations were analyzed using gas chromatography/mass spectrometry. Total measured dust concentration (up to 8.73±2.02mg/m3) fluctuated substantially in the different steps of paper manufacture. This was attributed to the type of the operation such as, the release of fibers and particles during paper cutting and the use of reactive chemicals and excessive water under high temperature and pressure during the bleaching and the water rinsing/drying step. Particulate polycyclic aromatic hydrocarbons (PAHs) (from fluorene to benzo[ghi]perylene with mean concentrations from 3.8±0.5 to 41.4±0.4ng/m3) and the unresolved mixture of branched, cyclic and unsaturated hydrocarbons (UCM) were measured in all samples while, n-alkanes from n-C20 to n-C27, were only observed in cutting and packaging areas (from 180.6±18.9 to 4297.9±794.9ng/m3). The profile of occupational PAHs in bleaching and treatment of contaminated recycled raw paper was comparable to that observed for anthropogenic activities. The values of molecular diagnostic ratios indicated the contribution of oil residues and emissions from worklifts and other equipment used for pulp and paper handling. Total benzo[a]pyrene-equivalent (BaP) concentrations of particulate PAHs (varied from 323 up to 1104pg/m3), provided evidence that workers were exposed to high quantities of PAHs as compared with exposures to urban air and other indoor settings, posing long-term threat to their health. [Copyright &y& Elsevier]

Abstract: Several studies have shown that differences in the relative abundance of cuticular hydrocarbons occur between reproductives and non-reproductives in many social insects. These differences also exist between Polistes dominulus foundresses and their first emerged daughters (usually indicated as workers), but they gradually disappear when workers from orphaned colonies develop their ovaries and assume a reproductive role in the colony. However, hydrocarbons are not the exclusive components of cuticular layer of wasps. Mass-spectrometry analysis of cuticular methanol extracts from Polistes paper wasps showed a complex pattern of polar substances, partly or totally proteinaceous in nature. We found that these compounds, ranging from 918 to 2679Da, showed a clear caste differentiation between foundresses and their first emerged daughters (usually indicated as “workers”), both in queen-right and in orphaned colonies. Conversely to hydrocarbons, workers from orphaned colonies maintain a significant difference from foundresses in the pattern of the medium molecular weight (MW) polar compounds obtained by MALDI-TOF. On the basis of such results we hypothesize that a reliable cue to identify foundresses from daughters, and not only their reproductive status, may exist in Polistes wasps. Although the great majority of previous work on social insect communication has focused on cuticular hydrocarbons, our findings suggest that the medium MW component of cuticular substances may be involved in recognition. [Copyright &y& Elsevier]

Differences in long-chain hydrocarbon mixtures among reproductive and nonreproductive individuals have been often revealed in social insects. However, very few papers demonstrated that these signatures actually act as contact pheromones used by nonreproductive to recognize the presence of a related queen in the colony. Cuticular and glandular hydrocarbons of Polistes paper wasps have been extensively studied, but, until now, the perception and recognition of such cues was not demonstrated. In this paper, we show, for the first time in Vespidae, that Polistes gallicus workers distinguish nestmates from alien individuals and queens from workers by the hydrocarbon mixtures of the Van der Vecht organ secretion (VVS). We also demonstrated that stroking behavior (a peculiar behavior of Polistes by which queens probably lay VVS on the nest) acts as an inhibitor of ovarian development in workers. [ABSTRACT FROM AUTHOR]

The responses of shortfin eel (Anguilla australis) to discharges from two pulp and paper mills, municipal wastewater, and a geothermal power plant wastewater were examined. Eels were caged at 3 sites along the Tarawera River, North Island, New Zealand, to explore effects of a 3-wk exposure down a contamination gradient (Ref → D1 → D2). Most of the observed effects were seen in eels caged at the furthest downstream site (D2), below all the discharge areas. General hematology in eels was unaffected, as measures did not differ markedly at the two downstream sites compared with the reference site. At D2, eels were significantly lighter per unit length (reduced condition factor), although liver and spleen size (LSI and SSI) were unaffected. Significantly elevated circulating sex steroid concentrations (testosterone and estradiol) were measured in D2 eels and increasing sex steroid levels at both sites downstream of the reference site were observed. Significant ethoxyresorufin O-deethylase (EROD) activity induction was seen in D2 eels and bile chemistry showed significant accumulation of pyrene and retene equivalents. However, significantly greater concentrations of total resin acids were found in the bile of eels from the intermediate site (D1), between the two pulp and paper mills. The higher polycyclic aromatic hydrocarbon (PAH) equivalents found in the bile of D2 eels suggest that resin acid neutrals, particularly retene, are responsible for some of the effects observed in eels at the furthest downstream exposure site. Levels of pulp and paper mill extractives in sediment, including the PAH retene, support this conclusion. [ABSTRACT FROM AUTHOR]

The influence of the physical and chemical characteristics of a paper substrate coated with a thin homogeneous film of poly(vinyl alcohol) (PVA) has been investigated. Some of the paper specimens were temperature-gradient (TG) calendered (at high temperatures) before pilot-scale coating. Two different paper grades differing in structure and sizing formulation were used. For one of the grades, the high-temperature calendering had a slight effect on the chemical composition of the paper surface as evaluated by electron spectroscopy for chemical analysis. For the other grade, no such effect was noted. In the former case, it was suspected that the sizing in the paper substrate degraded and, as a consequence, that volatile hydrocarbons evaporated from the surface. The slight change in surface chemistry had no significant direct effect on the homogeneity of the applied polymer film. The results indicated that the surface roughness of the substrate was the governing factor. The low surface roughness obtained by TG-calendering was beneficial for the homogeneity and barrier properties. In one series of experiments, some of the paper substrates (uncalendered and calendered) were corona-treated before PVA-coating. This treatment greatly increased the wettability of the surface by water. In general, the corona treatment improved the homogeneity and the barrier properties (grease resistance, air permeability and water vapour transmission) of the applied film. The surface smoothness was clearly important also for the corona-treated papers. [Copyright &y& Elsevier]

Abstract: A new tar destruction technology has been developed by integrating in-situ catalytic gasification and a hot-gas cleaning system in the catalytic gasification of paper-reject sludge. Experimental results indicated that the tar yield in syngas decreased significantly from 13.64 to 10.76 g/m3, when increasing the zeolite addition during in-situ catalytic gasification. When the syngas passed through the hot-gas cleaning system, the tar concentration measured from downstream was approximately 0.22 g/m3. The hot-gas cleaning system used in this research seems to have played a significant role in reducing tar concentration of the syngas. The major tar speciation identified after hot-gas cleaning system was 1-ring or 2-ring hydrocarbons, which included benzene, toluene, xylene, styrene and naphthalene. In summary, the energy yield efficiency of syngas will be enhanced due to the tar reduction and transformation. The syngas seems to be appropriate to use as a fuel in gas engines for electricity generation. [Copyright &y& Elsevier]

Comments on the paper "Age Dating of Environmental Organic Residues," by Isaac Kaplan. Elucidation of the important issues on the use of lead isotopes and nC17/Pr (n-heptadecane/Pristane) ratios to estimate the age of hydrocarbon releases into the environment; Summarization of Anthropogenic Lead ArchaeoStratigraphy (ALAS) model; Validity of the lead isotope ratios as ALAS model calibration points; Relationship between U.S. aerosol lead isotopes ratios and those of the ALAS model; Clarification on the manufacture and distribution of alky-lead.

Copper sulfide deposition on Kraft paper in oil-immersed transformers is found to be accelerated by di-tert-butyl p-cresol (DBPC), which is widely used as an antioxidant, and paraffinic hydrocarbons in their oils, which is verified in laboratory experiments. DBPC can prolong the lifetime of precursors of the copper sulfide deposition by reacting decomposition products of copper dibenzyl disulfide (Cu-DBDS) complex and by creating the Cu-DBPC complex. Because the lifetime of the Cu-DBPC complex is far longer than that of the Cu-DBDS complex, considerable amounts of copper sulfide are deposited on Kraft paper instead of being formed on the surface of copper. A good correlation is obtained between the concentration of paraffinic hydrocarbons and the amount of copper sulfide deposited on Kraft paper in the three commercial oils. [ABSTRACT FROM PUBLISHER]

Overpressure is always considered as a severe problem in the oil industry. Besides creating life risks through serious accidents while drilling, failure to correctly identify high-pressure intervals causes a significant increase in costs and prolongs the drilling process. Kazhdumi Formation in the Abadan Plain is considered as a high-pressure formation in several wells. Various reasons can cause overpressure problem. Hydrocarbon generation is one cause of abnormal pressure in source rocks. Understanding hydrocarbon generation potential can be a helpful approach since the Kazhdumi Formation is considered as a probable source rock in this area. In this paper, in order to better understand the problem of abnormal pressure in Kazhdumi Formation, geochemical concepts and tools have been applied. To that way, 1D petroleum system modeling of five wells was done, and the thermal maturity level of Kazhdumi Formation was determined and then, compared with drilling records. The results indicate that in wells where this formation has sufficient organic matter and has reached an early mature level, there is an abnormal pressure problem. Otherwise, this formation does not show abnormal pressure. Also, geochemical data are not available in all drilled wells, which makes impossible the assessing of hydrocarbon generation role. Therefore, petrophysical well logs (sonic (DT), neutron (NPHI), density (RHOB), spectral gamma ray (SGR), and resistivity (RES)) as well as 137 sets of geochemical data belonging to 13 wells from 7 oilfields in the Abadan Plain were used to predict geochemical indicators. Using artificial neural networks, geochemical data of a well in Abadan Plain were predicted. This selected well has a high-pressure problem in Kazhdumi Formation, but no geochemical data are available in this well. The results of predicted geochemical data show that the high-pressure phenomenon in this well may also be due to hydrocarbon generation. The precise understanding of the abnormal pressure, resulting from hydrocarbons generation, requires comprehensive studies and a full investigation of the studied area. However, the results of this paper help to predict approximately the behavior of the source rocks before drilling. Acquiring this overview will aid in reducing drilling hazards and costs. [ABSTRACT FROM AUTHOR]

Selective oxidation of tetralin by molecular oxygen over mesoporous CrMCM-41 molecular sieve catalyst using supercritical carbon dioxide (scCO2) solvent has been investigated. CrMCM-41 catalyst gave high selectivity (96.2%) and good yield (63.4%) of 1-tetralone. The presence of scCO2medium improves 1-tetralone selectivity and suppresses leaching of chromium from the CrMCM-41. The activity over recycled CrMCM-41 remains nearly the same under the present experimental conditions. The effect of the reaction parameters on CrMCM-41 was also studied in detail along with comparison of its catalytic activities with other mesoporous catalysts, viz.MnMCM-41, CoMCM-41, microporous CrAPO-5, CoMFI, and macroporous Cr/SiO2catalyst, respectively. In addition this catalytic system was also applied for the oxidation of other benzylic compounds such as indane, fluorene, acenaphthene and diphenylmethane. [ABSTRACT FROM AUTHOR]

The synthesis of covalently linked dimers, containing two resorcin[4]arene moieties connected over two 9,10-functionalized anthracene units, is reported. Besides the synthetic route, which involves for example the formation of anthracene-9,10-dialkanols (4and 5), and characterization of the compounds, the photochemical properties, introduced through the anthracene groups, were investigated by means of UV/VIS spectroscopy. Both resorcin[4]arene dimers (1and 2) were able to undergo an intramolecular [4 + 4] cycloaddition, therefore changing the size of the inner cavity. Unfortunately, the back reaction, which was expected to take place on irradiation below 300 nm or upon heating, was not observed yet and will be the focus of our future work. [ABSTRACT FROM AUTHOR]

Philopatric behavior has been demonstrated in a wide taxonomic spread of animals. In temperate environments, overwinteredPolisteswasp foundresses often return to their natal nest prior to initiating colony construction. Previous research has shown that these spring foundresses can identify the natal nest in the absence of landmark and gross morphological cues. Hydrocarbons are essential recognition cues forPolistesnest and nestmate discrimination, but cuticular hydrocarbon profiles can become homogenized when foundresses overwinter in mixed colony groups. We examined the hydrocarbon profiles ofPolistes dominulusfoundresses and nests before and after an overwintering period, and found that the hydrocarbon profiles of nests remain unique over time and that this uniqueness is influenced by the original foundresses. Our data raise the possibility that in returning to the natal nest, foundresses reacquire their colony-specific signature, which may play a role in the formation of cooperative associations. [ABSTRACT FROM AUTHOR]