Search

This paper analyses the conference papers published by double first‐class universities from mainland China between 2006 and 2019. The main findings are as follows: first, the number of conference papers from different double first‐class universities varied greatly, with the annual numbers of papers in the China Proceedings of Conferences Full‐text Database (CPCD) and in the Conference Proceedings Citation Index (CPCI) fluctuating during this period. Second, most of the top 10 disciplines of the papers in the CPCD and CPCI were in the natural sciences, with only two in the social sciences. The CPCD papers and CPCI papers had some overlap in their disciplinary distributions. Third, the CPCD and CPCI papers differed little in total number, with the number of CPCI papers being slightly higher than the number of CPCD papers. With the introduction of new regulations from the Ministry of Science and Technology (MST), there will likely be an increase in the number of Chinese‐language conference papers in the future. [ABSTRACT FROM AUTHOR]

The study compared the bibliometric parameters of scholarly communications published in COLLNET Journal of Scientometrics & Information Management (CJSIM) and Journal of Scientometric Research (JSR) from 2012 to 2021. Different bibliometric parameters examined in the study are pattern of output during 2012 to 2021, identification of most prolific countries and their citation impact in terms of Citation Per Paper (CPP), i-10 index and Papers not Cited (PnC). Study also identified prolific institutions and authors and their citation impact besides examining pattern of citation. The study also examined the pattern of domestic and international collaboration. Findings of the study indicate that the pattern of output is inconsistent in both the journals. The output is scattered among 39 countries in CJSIM and 50 countries in JSR. India followed by Iran contributed the highest number of papers in both the journals. Most of the prolific institutions and authors were from India in both the journals. More number of papers remained uncited in CJSIM as compared to JSR. More number of papers were published in domestic collaboration in JSR as compared to CJSIM. However, papers published in international collaboration in both the journals was almost equal. Among all the countries, China published the highest number of papers in international collaboration in CJSIM, but no such trend was observed in JSR. [ABSTRACT FROM AUTHOR]

Background: This study has two primary objectives. Firstly, it aims to measure the time savings achieved through the digitization of paper forms filled out by nurses in the inpatient care process. Secondly, it seeks to reveal the financial savings resulting from reduced paper consumption due to the digitalization. The Health Information Management System Society (HIMSS)--Electronic Medical Record Adaption Model (EMRAM), which makes stage-based (0--7) evaluations, serves as a tool to measure the rate of technology utilization in public hospitals in Turkey. The study is based on the HIMSS EMRAM criteria for 2018. Bahçelievler State Hospital, a public hospital in Turkey, was chosen as the research facility. In 2017, it was accredited as Stage 6 with HIMSS EMRAM. However, not all its wards have been digitalized. Initially, pilot selected wards were digitized. Therefore, digital and non-digital wards serve together. In this context, 4 wards were randomly selected and time, paper and toner savings before and after digitalization were measured. Method: A table was created in Microsoft Excel,listing the forms used by nurses in inpatient care and the time required to fill them out.The time spent for filling paper-based forms and digital-based forms was measured in randomly selected wards. Result: The analysis showed that digital forms saved more time, paper and toner. For example, filling out the patient history form took 45 min when using paper, compared to 12 min in digital environment. Approximately 27% time savings are achieved only for the patient history form. The total time savings delivered by digitalization for 1,153 inpatients during the year were found as 117 care days, and the savings on total paper consumption was 41.289 pages. For 1,153 inpatients throughout the year, the total time savings from digitalization was 117 care days and the total paper consumption savings was 41,289 pages. In addition, in 4 wards with a total bed capacity of 25, annual paper savings of $1,705.86 and toner savings of $283,736 were achieved. Discussion: This study reveals the benefits of digitalisation in hospitals for nurses. It saves the time that nurses allocate for filling out paper forms with digitalised forms. Thus, it is a good practice example in terms of using the time allocated for form filling for patient care.When we extend this study to Turkey in general, it can be considered that the time savings achieved by nurses by digitizing inpatient forms varies between 10.8% and 13%. The number of nurses working in public hospitals in Turkey is approximately 160,000. Assuming that 60% of the nurses work in the inpatient ward, it is understood that the annual savings achieved by digitizing the forms corresponds to a range of 398--559 nursing hours. [ABSTRACT FROM AUTHOR]

The apps for drawing are present in our children's life. Nevertheless, little is known about the impact of mobile technology on the freehand drawing educational activity. There are few works which are contextualised within short periods of time, with teachers who are not theirs and, in some cases, outside the children's classroom. In this paper, we are focussed on the use of technology on freehand drawing activity. Thus, we have compared the graphics produced by 4- and 5-year-old children with paper&crayon in comparison with those with tablet-finger. Children made the drawings during a planned free-drawing activity, in their ordinary classrooms, with their teachers and during five sessions. Assessment of drawings has evidenced tablet feasibility for making graphics. Nevertheless, with the passing of time, quality of graphics (tablet-finger vs paper&crayons), are nearly matched, demonstrating the low impact level technology has on this activity. In addition, if drawings are analysed specifically according to ages, results have shown that both groups have to develop adaptation strategies of visual perceptual skills and fine motor skills for the touch screen in order to obtain the same quality in the drawings made on both support types. [ABSTRACT FROM AUTHOR]

The properties of handmade paper used for mounting and conservation of paintings and calligraphy on paper is crucial to the quality and lifespan of such objects. Mounting papers from China, Korea, and Japan vary greatly in performance due to different papermaking methods and fibre materials. In this study, eight types of handmade paper widely used in China, Korea, and Japan were selected for comprehensive comparative analysis investigating their pH as well as optical, mechanical, and ageing properties. The study showed that traditional hanji, improved hanji, and thin Mino paper made of pure kozo fibres performed best in terms of mechanical properties. Among the additives mixed with kozo fibres, clam shell powder was identified as a substance that improves pH and stability of optical properties. Xuan paper Mianliao was found to be a suitable material for mounting hand scrolls and hanging scrolls due to its softness and ageing properties. Traditional hanji, improved hanji, and thin Mino paper are less flexible than xuan paper Mianliao and are considered more suitable for uses other than for mounting scrolls. This study will provide a reference for improving the quality of handmade paper and a theoretical basis for the selection of such papers for the conservation of paintings and calligraphy on paper. [ABSTRACT FROM AUTHOR]

Natural and synthetic esters are increasingly being chosen instead of mineral oil for environmental and fire safety reasons. However, their use in power transformers is limited due to insufficiently well-understood ageing processes affecting their properties and the properties of cellulosic materials impregnated with them. The research results presented in many scientific papers prove that the use of esters slows the ageing process of cellulosic materials. This article presents the results of research aimed at answering the question of whether the effect of slowing the ageing process will also occur in the case of insulation with very low initial moisture. The answer to this question will allow us to better understand the role of water in the ageing process of the transformer's insulation system. The thermal ageing process was carried out at a temperature of 150 °C in closed systems. The degree of cellulose polymerisation was taken as a measure of the degree of paper ageing. Great attention was paid to measuring the water content in both paper and electro-insulating liquids at various stages of their ageing. Furthermore, measurements of the properties of electro-insulating liquids were made, which are considered markers of ageing. The test results obtained indicate that in the case of a dry insulation system, corresponding to the initial moisture of the new units, the type of liquid used to impregnate the cellulosic material does not significantly affect its depolymerisation process. However, in the case of paper impregnated with natural esters, a lower dynamic of moisture increase in insulation was observed. [ABSTRACT FROM AUTHOR]

Objective: to analyse the artistic bindings of the eighteenth-century prints stored in the Historical-artistic Binding Database of the Royal Library, in order to locate the endpapers made with decorated papers, and to classify and describe them according to the proposals of the specialist literature. Methodology: The records from the database were retrieved using the "date" field, and the information is extracted from the "endpapers" and "notes" fields. The reproductions of the endpapers were analysed, identified and described following the classification model of decorated papers inspired by the works of Professor Carpallo Bautista, consisting of five techniques and their variants. Finally, a comparative analysis was carried out. Results: Among the 382 eighteenth-century prints with artistic bindings, ten were located and analysed that include endpapers decorated with xylographic plates, 135 with marbled or mottled papers (with designs corresponding to seven variants), four with paste-glued papers, three with dotted papers, 18 with gold and embossed papers, and four of other kinds such as silver or percaline paper. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this study was to investigate associations between digital urine color and paper urine color with other urine indices to assess hydration status. Methods: Twelve male subjects (mean ± standard deviation; age, 26 ± 8 years; body mass, 57.8 ± 5.3 kg; height, 177.5 ± 8.9 cm; VO2max, 57.8 ± 5.8 ml·kg−1·min−1) performed four exercise trials in the heat. Before and following exercise trials, subjects provide urine samples. Urine samples were measured using a digital urine color chart on a portable device screen. Urine samples were also assessed with urine specific gravity (USG), urine osmolality (UOsmo), and a validated paper urine color chart. Results: There were extremely large associations found between digital urine color and paper urine color (r = 0.926, p < 0.001). Correlation coefficients showing associations with USG and UOsmo were similar between digital urine color (USG, r = 0.695, p < 0.001; UOsmo, r = 0.555, p < 0.001) and paper urine color (USG, r = 0.713, p < 0.001; UOsmo, r = 0.570, p < 0.001). Bland–Altman analysis indicated that no proportional bias was observed between digital and paper urine colors (bias, − 0.148; SD of bias, 0.492; 95% LOA, − 1.11, 0.817; p = 0.094). Conclusions: Strong associations were found between digital and paper urine colors with no proportional bias. Furthermore, the degree of associations with USG and UOsmo was similar between digital and paper urine color. These results indicate that digital urine color is a useful tool to assess hydration status and this method could be used as an alternative method to using paper urine color. [ABSTRACT FROM AUTHOR]

A new coating method was developed, based on cellulose regenerated from an N-methylmorpholine N-oxide (NMMO) solution applied to paper. In particular, the purpose of this study was to compare the effectiveness of the "deep coating" method using cellulose regenerated from NMMO solution and the classic pulp refining process as methods to improve paper mechanical properties and overall quality. The "deep coating" name comes from the fact that the coating process is combined with subsequent heating of the coating before its final solidification. As a result of this operation, deep penetration of the cellulosic solution into the paper structure occurs. This increases the contact surface of the solution with the cellulosic fibers, which increases the strength properties of the paper structure. It was found that the cellulosic coating increased the apparent density of the paper, the tensile strength, the elongation, the resistance to bursting, and the double fold number. However, the coating also decreased the air permeability and the tear resistance of the paper samples. Despite some technological difficulties, this method could be an attractive solution in the case of a need for additional functionalization of a paper structure. [ABSTRACT FROM AUTHOR]

Objective: To assess differences between traditional paper bag ordering and online ordering from primary school canteens in terms of menu, usage and lunch order characteristics.Design: A cross-sectional study.Setting: New South Wales (NSW) primary schools that offered both paper bag and online canteen ordering.Participants: Students (aged 5-12 years) with a lunch order on the day of the observation.Results: Across the six school canteens, 59-90 % of all available items were listed on both the online and paper menus, with no significant differences in the nutritional quality ('Everyday'/'Occasional') or nutritional content (kJ/saturated fat/sugar/sodium) of menu items. In total, 387 student lunch orders were placed, containing 776 menu items. Most orders (68 %) were placed online. There were no significant differences between order modality in the quantity of items ordered or the cost of orders, or the nutritional quality of orders based on the classification system of the NSW Healthy School Canteen Strategy ('Everyday'/'Occasional'). However, nutritional analysis revealed that paper bag orders contained 222 fewer kJ than online orders (P = 0·001), 0·65 g less saturated fat (P = 0·04) and 4·7 g less sugar (P < 0·001).Conclusions: Online canteens are commonly used to order canteen lunches for primary school children. This is the first study to investigate differences between traditional paper bag ordering and online ordering in this setting. Given the rapid increase in the use of online ordering systems in schools and other food settings and their potential to deliver public health nutrition interventions, additional research is warranted to further investigate differences in ordering modalities. [ABSTRACT FROM AUTHOR]

Objectives: Most researchers who study the effects of hormonal contraception on menstrual bleeding rely on self-reported data via paper diaries, for which completeness and timeliness have been shown to be poor. The purpose of this exploratory study was to compare the completeness and timeliness of bleeding data collected via paper diaries, text messages or smartphone application (a.k.a "app"). Methods: This was a sub-study of a double-blinded, placebo-controlled randomized trial comparing the effects of a non-steroidal anti-inflammatory drug, naproxen, with placebo when using a copper IUD. Participants tracked bleeding and symptoms over 112 days. Participants tracked bleeding daily using a paper diary as well as with either text messages or a smartphone app. Participants who used paper and the app were also able to record non-bleeding symptoms. Results: Twenty-five participants submitted diaries. Of these participants, 10 completed both paper and app diaries, 7 completed both paper and text messages, 4 completed the paper diary only, 4 completed the app only. Text messages had the most complete data (108 days), followed by the app (96 days) and paper diaries (84 days). The lag time between a bleeding event and the date recording that event was 0.10 days for text, 1.0 days for app, and 4.73 days for paper diaries. Participants using the app reported a median of 33 other symptoms over the study period compared to 7 for the paper diaries. Discussion: Our findings suggest texts demonstrated more complete and timely bleeding data than either paper diaries, or the app. Compared to paper diaries, the app delivered more complete, timely data, and also collected a large set of symptoms. [ABSTRACT FROM AUTHOR]

Alkyl ketene dimer (AKD) and rosin sizing are used in papermaking to decrease paper's tendency to absorb liquid water. Earlier information regarding the effects of internal sizing on paper dry strength is not consistent. In the present laboratory study, AKD sizing of handsheets made from Nordic bleached softwood pulp (NBSK), and rosin sizing of handsheets made from Nordic hardwood chemi-thermomechanical pulp (CTMP) were done via an internal sizing method, and by immersing handsheets in aqueous sizing agent dispersion. In the study, AKD sizing had no significant effect on the dry strength of NBSK handsheets. The result corresponds to practical experiences of papermakers. However, both AKD sizing methods resulted in a substantial and long-lasting increase of handsheet wet-strength. Unlike internal AKD sizing of NBSK handsheets, rosin internal sizing of CTMP handsheets resulted in decreased handsheet dry strength. The decrease indicates that, under the conditions present during the experiment, rosin sizing agents interfered with interfiber hydrogen bonding of CTMP fibers. Given that, in practice, no such undesired effects have been commonly linked to rosin sizing, the observed effect may be specific to sheet-making conditions. However, the effect of rosin sizing on strength properties and their variation cannot be ruled out completely. [ABSTRACT FROM AUTHOR]

Background: The Integrated Palliative Care Outcome Scale (IPOS) validly and reliably measures symptoms and concerns of those receiving palliative care. Aim: To determine the equivalence of the paper version with an electronic version of the IPOS (eIPOS). Design: Multicentre randomised crossover trial (NCT03879668) with a within-subject comparison of the two modes (washout period 30 min). Setting/Participants: Convenience sample of specialist inpatient and palliative home care patients aged over 18 years with cancer and non-cancer conditions was recruited. Scores were compared using intraclass correlation coefficients (ICC), Bland-Altman plots and via a mixed-effects analysis of variance. Results: Fifty patients were randomised to complete paper-electronic (n = 24) and electronic-paper (n = 26) IPOS with median age 69 years (range 24–95), 56% male, 16% non-cancer. The ICCs showed very high concordance for the total score (ICC 0.99, 95% CI 0.98–1.00), lowest ICCs being observed for symptoms 'Appetite loss' and 'Drowsiness' (ICC 0.95, 95% CI 0.92–0.97). Nine of seventeen items had ICCs above 0.98, as did all subscales. No statistically significant mode, order, age, and interaction effects were observed for IPOS total score and subscales, except for 'Communication' (Fmode = 5.9, p = 0.019). Fifty-eight percent preferred the electronic version. In the group 75+ years, 53% preferred the paper version. Only three entries in the free-text main problems differed between the versions. Conclusion: The very high equivalence in scores and free text between the IPOS and the eIPOS demonstrates that eIPOS is feasible and reliable in an older palliative population. [ABSTRACT FROM AUTHOR]

The introduction of mobile devices such as smartphones provides new opportunities to enhance the teaching–learning process of a foreign language. However, its use can affect not only the students' type and form of writing but also their ability to achieve the academic competencies targeted. Thus, aspects such as the development of linguistic and communicative competencies could be affected. In this paper, a comparative analysis of two different versions (a paper and a digital version) of the same learning task is carried out in order to analyze the impact of each on the development of students' linguistic and communicative competencies. The study is conducted with undergraduate students enrolled in a course called German II. Modern Language I (level A1.2, Common European Framework of Reference for Languages). The results obtained illustrate, on the one hand, the advantages of the paper version for developing students' linguistic competence and, on the other hand, that the digital version, despite facilitating students' interaction amongst each other, does not seem to be more suitable for developing students' communicative competence. Future studies will, therefore, focus on identifying those features that might increase the potential of the digital version for fostering the targeted competencies. [ABSTRACT FROM AUTHOR]

Since the end of the Cold War, the EU aims to advance to a relevant and autonomous actor in international politics—especially concerning security and defense politics. Scholars interested in whether the EU member states actually converge in their security and defense preferences often analyze strategy papers qualitatively, focusing on selected countries at specific points in time. In this article, we propose a dictionary approach for analyzing the development of security and defense preferences within the EU over the last three decades using quantitative text analysis. We make use of 163 strategy papers, published by all EU member states and the EU itself since 1994. The findings show that EU member states react similarly to international events, but do not converge substantially in their preferences. Furthermore, there is no substantial convergence to the position of the EU itself. We finally discuss usefulness and validity of quantitative text analysis in comparative research more broadly. [ABSTRACT FROM AUTHOR]

The European Commission Horizon 2020 project—PreventIT—evaluated two approaches to delivering Lifestyle-Integrated Functional Exercise (LiFE) programs for maintaining older adults' physical function: the paper-based adapted LiFE and mobile health device delivered enhanced LiFE. A self-reported method was used to measure users' monthly adherence over 12 months. This analysis aimed to explore young seniors' adherence patterns between enhanced LiFE and adapted LiFE groups. Results showed that adherence level decreased with time in both groups. The enhanced LiFE group had slightly higher adherence than the adapted LiFE group during most of the 12 months. However, the overall adherence levels were not significantly different during either intervention or follow-up periods. Monthly self-reported adherence measurement can help to understand users' adherence comprehensively. The comparable adherence levels between both groups indicate mobile health could be an alternative to delivering home-based physical activity for young seniors. However, this feasibility study was not powered to detect differences between groups. [ABSTRACT FROM AUTHOR]

In people with bone and soft tissue injuries of the wrist, hand and/or fingers, do feedback-guided exercises performed on a tablet touchscreen hasten return to work, reduce healthcare usage and improve clinical recovery more than a home exercise program prescribed on paper? Randomised, parallel-group trial with concealed allocation, assessor blinding and intention-to-treat analysis. Seventy-four workers with limited functional ability due to bone and soft tissue injuries of the wrist, hand and/or fingers. Participants in the experimental and control groups received the same in-patient physiotherapy and occupational therapy. Participants in the experimental group received a home exercise program using the ReHand tablet application, which guides exercises performed on a tablet touchscreen with feedback, monitoring and progression. Participants in the control group were prescribed an evidence-based home exercise program on paper. The primary outcome was the time taken to return to work. Secondary outcomes included: healthcare usage (number of clinical appointments); and functional ability, pain intensity, and grip and pinch strength 2 and 4 weeks after randomisation. Compared with the control group, the experimental group: returned to work sooner (MD –18 days, 95% CI –33 to –3); required fewer physiotherapy sessions (MD –7.4, 95% CI –13.1 to –1.6), rehabilitation consultations (MD –1.9, 95% CI –3.6 to 0.3) and plastic surgery consultations (MD –3.6, 95% CI –6.3 to –0.9); and had better short-term recovery of functional ability and pinch strength. In people with bone and soft-tissue injuries of the wrist, hand and/or fingers, prescribing a feedback-guided home exercise program using a tablet-based application instead of a conventional program on paper hastened return to work and improved the short-term recovery of functional ability and pinch strength, while reducing the number of required healthcare appointments. ACTRN12619000344190 [ABSTRACT FROM AUTHOR]

The SIR Iber highlights the geographical location of Ibero-American universities by positioning them according to the indicators grouped into three main factors: research, innovation and social impact. The 2020 edition highlights the formation of three groups of countries according to the production capacity of higher education institutions. In group 1 we have: Brazil, Mexico, Chile, Argentina, and Colombia as Latin American countries that managed to publish more than 60,000 papers in the period 2014-2018. This paper analyzes and compares the indicators from the five (05) Latin American countries in group 1 of the SIR Iber 2020 referring to investment in I+S as a percentage of its Gross Domestic Product (PIB), the number of full-time equivalent researchers (Inv JCE), the production (%) of scientific works in the university education sector, to name a few. A conglomerate formed with the Normalized Impact (NI) of public and private IESs is presented, regarding the global average of citation, with the data published in the SIR IBER 2020 Report, and highlights that Chile has a normalized impact above the World average for both public and private IES publications. [ABSTRACT FROM AUTHOR]

The Lidcombe Program was developed in the 1980s for children who stutter. This program relies on the efficacy of caregivers in managing their child's stutter within everyday environments, including rating the severity of their child's stuttering on a daily basis. The aim of this pilot project was to compare the traditional paper-based severity rating (SR) system to a newly developed online SR system and, in the context of one regional community health service, report on the outcomes of novel components such as the daily reminder text message. A descriptive comparative analysis was utilised to assess the opinions of participants on the two SR systems by using an online questionnaire. All participants (n = 7) preferred the online SR system compared to the paper-based SR system and in particular found the feature of an evening daily SMS text message to be useful in reminding them to rate their child's stuttering severity. This small pilot study demonstrated that adding a relatively small initiative to an established program can have a considerable impact on the monitoring of adherence to therapy in a small community health care service. [ABSTRACT FROM AUTHOR]

Simple Summary: Blood clots are formed when blood vessels are injured. They help stop bleeding and heal wounds, but can also cause serious problems if they block blood flow or break off and travel to other organs. This study investigates how blood clots differ in people with cancer compared to healthy or non-cancerous individuals. This study found that cancer patients have higher levels of histones in their blood, which make their clots stiffer and resistant to lysis. Further, clots formed in cancer patients have higher viscoelastic properties, and hence are harder to break down. These findings suggest that cancer patients have abnormal clotting properties that may increase their risk of developing thrombosis, and evaluating these properties can be helpful in detecting cancer. Background: Blood viscoelasticity and plasma protein levels can play an important role in the diagnosis and prognosis of cancer. However, the role of histones and DNA in modulating blood clot properties remains to be investigated. This study investigates the differences in blood viscoelasticity and plasma protein levels among cancer patients, individuals with other diseases, and healthy individuals. Methods: Blood samples were collected from 101 participants, including 45 cancer patients, 22 healthy individuals, and 34 individuals with other diseases. Rheological properties of clots formed in vitro by reconstituted elements of fibrinogen or plasma were analyzed with an Anton Paar Rheometer, USA. Plasma protein levels of D-dimer, TPA, EPCR, fibrinogen, and histone H3 were measured through ELISA. Blood clots were formed with or without DNA and histones (H3) by adding thrombin and calcium to plasma samples, and were evaluated for viscoelasticity, permeability, and degradation. Results: Cancer patients show higher blood viscoelasticity and plasma D-dimer levels compared to healthy individuals and individuals with other diseases. Our in vitro analysis showed that the addition of histone to the plasma results in a significant decrease in viscoelasticity and mean fiber thickness of the clot formed thereafter. In parallel studies, using plasma from patients, DNA and histones were detected in fibrin clots and were associated with less degradation by t-PA. Moreover, our results show that the presence of DNA and histones not only increases clots' permeability, but also makes them more prone to degradation. Conclusions: Plasma histones and DNA affect the structure of the clot formed and induce defective fibrinolysis. Moreover, the increased viscoelastic properties of plasma from cancer patients can be used as potential biomarkers in cancer prognosis. [ABSTRACT FROM AUTHOR]

The Dimensional Anhedonia Rating Scale (DARS) is a novel questionnaire to assess anhedonia of recent validation. In this work, we aim to study the equivalence between the traditional paper-and-pencil and the digital format of DARS. Sixty-nine patients filled the DARS in a paper-based and digital versions. We assessed differences between formats (Wilcoxon test), validity of the scales [Kappa and intraclass correlation coefficients (ICCs)], and reliability (Cronbach's alpha and Guttman's coefficient). We calculated the comparative fit index and the root mean squared error (RMSE) associated with the proposed one-factor structure. Total scores were higher for paper-based format. Significant differences between both formats were found for three items. The weighted Kappa coefficient was approximately 0.40 for most of the items. Internal consistency was greater than 0.94, and the ICC for the digital version was 0.95 and 0.94 for the paper-and-pencil version (F = 16.7, p < 0.001). Comparative Adjustment Index was 0.97 for the digital DARS and 0.97 for the paper-and-pencil DARS, and RMSE was 0.11 for the digital DARS and 0.10 for the paper-and-pencil DARS. We concluded that the digital DARS is consistent in many respects with the paper-and-pencil questionnaire, but equivalence with this format cannot be assumed without caution. [ABSTRACT FROM AUTHOR]

Is it really better to print everything, including software models, or is it better to view them on screen? With the ever increasing complexity of software systems, software modeling is integral to software development. Software models facilitate and automate many activities during development, such as code and test case generation. However, a core goal of software modeling is to communicate and collaborate. Software models are presented to team members on many mediums and two of the most common mediums are paper and computer screens. Reading from paper or screen is ostensibly considered to have the same effect on model comprehension. However, the literature on text reading has indicated that the reading experiences can be very different which in turn effects various metrics related to reader performance. This paper reports on an experiment that was conducted to investigate the effect of reading software models on paper in comparison with reading them on a computer screen with respect to cognitive effectiveness. Cognitive effectiveness here refers to the ease by which a model reader can read a model. The experiment used a total of 74 software engineering students as subjects. The experiment results provide strong evidence that displaying diagrams on a screen allows subjects to read them quicker. There is also evidence that indicates that on screen viewing induces fewer reading errors. [ABSTRACT FROM AUTHOR]

This study attempts to examine the differences in consumers' perceptions between paper and mobile coupons. It discovers new potentials of mobile coupons by investigating whether coupon type (mobile vs. paper) has any impact on a consumer's coupon usage intention. It explores the drivers and barriers of consumers' coupon usage intention and also examines to which extent coupon type translates into higher usage intention rates. The data of this study were analyzed with exploratory factor analysis, ttest, and multiple regression analysis. This study revealed that when the coupon type changes from paper to mobile, people's coupon intention to use decreases, with the lack of trust as the primary barrier. The current study is the first attempt to apply this transactional utility theory to compare consumers' perceptions between mobile and paper coupons. This study has empowered the transactional utility theory by applying it in a new domain of couponing. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Near Architecture is the property of Journal of Near East Architecture and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Scientific papers are essential manifestations of evolving scientific knowledge, and arguments are an important avenue to communicate research results. This study aims to understand how the argumentation process is represented in scientific papers, which is important for knowledge representation, discovery, and retrieval. First, based on fundamental argument theory and scientific discourse ontologies, a coding schema, including 17 categories was constructed. Thereafter, annotation experiments were conducted with 40 scientific articles randomly selected from two different research areas (library and information science and biomedical sciences). Statistical analysis and the sequential pattern mining method were then employed; the ratio of different argumentation units and evidence types were calculated, the argumentation semantics of figures and tables analyzed, and the argumentation structures extracted. A correlation analysis between argumentation and rhetorical structures was also performed to further reveal how argumentation was represented within scientific discourses. The results indicated a difference in the proportion of the argumentation units in the two types of scientific papers, as well as a similar linear construction with differences in the specific argument structures of each knowledge domain and a clear correlation between argumentation and rhetorical structure. [ABSTRACT FROM AUTHOR]

Sewage fine sieved fraction (FSF) is a heterogeneous substrate consisting of mainly toilet paper fibers sequestered from municipal raw sewage by a fine screen. In earlier studies, a maximum biodegradation of 62% and 57% of the sewage FSF was found under thermophilic (55 °C) and mesophilic (35 °C) conditions, respectively. In order to research this limited biodegradability of sewage FSF, this study investigates the biodegradation of different types of cellulosic fibers-based hygiene papers including virgin fibers based toilet paper (VTP), recycled fiber based toilet paper (RTP), virgin pulp for paper production (VPPP) as a raw material, as well as microcrystalline cellulose (MCC) as a kind of fiberless reference material. The anaerobic biodegradation or digestibility tests were conducted under thermophilic and mesophilic conditions. Results of the experiments showed different biomethane potential (BMP) values for each tested cellulose fiber-based substrate, which might be associated with the physical characteristics of the fibers, type of pulping, presence of lignin encrusted fibers, and/or the presence of additive chemicals and refractory compounds. Higher hydrolysis rates (K h ), higher specific methane production rates (SMPR) and shorter required incubation times to achieve 90% of the BMP (t 90% CH 4 ), were achieved under thermophilic conditions for all examined substrates compared to the mesophilic ones. Furthermore, the biodegradability of all employed cellulose fiber-based substrates was in the same range, 38–45%, under both conditions and less than the observed FSF biodegradability, i.e. 57–62%. MCC achieved the highest BMP and biodegradability, 86–91%, among all cellulosic substrates. [ABSTRACT FROM AUTHOR]

At graduation, marketing students are expected to have basic marketing research skills. Although most will not enter marketing research careers, many will be required to interpret research and apply that knowledge to solve problems or recognize market opportunities. We compare the readability of several marketing research textbooks and professional research papers. In this study, the majority of books are written at an undergraduate level, while the majority of professional papers are written at the graduate level. Results suggest that attention should be given to readability as one variable in the teaching and learning environment to improve student skills upon graduation. [ABSTRACT FROM AUTHOR]

Score equivalency of two Computer-Based Testing (henceforth CBT) and Paper-and-Pencil-Based Testing (henceforth PBT) versions has turned into a controversial issue during the last decade in Iran. The comparability of mean scores obtained from two CBT and PBT formats of test should be investigated to see if test takers' testing performance is influenced by the effects of testing administration mode. This research was conducted to examine score equivalency across modes as well as the relationship of gender, and testing mode preference with test takers' performance on computerized testing. The information on testing mode preference and attitudes towards CBT and its features was supported by a focus group interview. Findings indicated that the scores of test takers were not different in both modes and there was no statistically significant relationship between moderator above variables and CBT performance. [ABSTRACT FROM AUTHOR]

Environmental and economic concerns are driving tissue paper manufacturers to improve understanding of the relationships between fibres, the networks they form, the forming process, and the final tissue paper properties. This work investigated how pulp fractionation, refining, or addition of microfibrillated cellulose (MFC) affect the compromise between absorbency and strength of 33 ± 2 g/m² model papers made of bleached eucalyptus kraft pulp. The results showed that the compromise of properties was better when fibres were refined than when MFC was added. The absorbency capacity of 2%wt MFC-paper was almost 20% lower than the capacity of the refined paper at the same dry strength. The calculated additional storage capacity due to water-induced deformations of the fibre network was 40% lower in the same range of bulk. By forming a high viscosity gel at inter-fibre contacts, MFC could limit the occurrence of major fibre and network deformation mechanisms when water was imbibing the paper. [ABSTRACT FROM AUTHOR]

Objectives. To evaluate the usefulness of a novel acoustic uroflowmetry- (UFM-) based mobile application (app) voiding diary (VD) focusing on the (1) compliance and (2) correlation with a conventional paper-based VD. Materials and Methods. A total of 78 patients were included between December 2019 and June 2020, and a subsequent review of all data was performed. The analyzed data were as follows: (1) survey of convenience/satisfaction/preference comparing the two methods, (2) compliance regarding the completeness of both methods, and (3) correlation of each metric (24-hour urine volume, nocturnal urine volume, nocturnal polyuria index, total number of voids, number of daytime voids, number of nocturnal voids, and maximal bladder capacity) between the two methods. Results. The survey results of convenience, satisfaction, and preference were as follows. With regard to convenience and satisfaction area, higher scores are reported in the mobile app VD (mean ± standard deviation (SD); convenience: 7.47 ± 2.19 [app] vs. 4.20 ± 2.49 [paper]; satisfaction: 7.36 ± 2.17 [app] vs. 5.07 ± 2.65 [paper]). The median score of the overall preference for using the mobile app instead of the paper-based VD was 9 out of 10 (mean ± SD 7.82 ± 2.68). We also found a good correlation between the two methods for nocturnal urine volume (r = 0.55 , p = 0.04), nocturnal polyuria index (r = 0.66 , p = 0.23), total number of voids (r = 0.9 , p = 0.02), number of nocturnal voids (r = 0.83 , p = 0.02), and maximal bladder capacity (r = 0.89 , p = 0.04). Conclusion. The acoustic UFM-based mobile app VD demonstrated favorable findings compared to the conventional paper-based VD. [ABSTRACT FROM AUTHOR]

The gold standard for measuring anhedonia is the Snaith-Hamilton Pleasure Scale (SHAPS). To date, there are no validated electronic versions of this questionnaire. We aim to study the equivalence between the traditional paper-and-pencil format and a digital version of the SHAPS. A group of 67 patients completed both SHAPS formats, and differences between formats were assessed. McNemar's test showed no significant differences between the two systems. The Kappa coefficient was over 40% for most items, and reliability was above 0.8, showing good to excellent levels of internal consistency. Thus, we have demonstrated a close equivalence between paper-and-pencil and electronic SHAPS. [ABSTRACT FROM AUTHOR]

A combination of experimental techniques was employed to test primary fragmentation and char particle attrition by abrasion during fluidized bed (FB) combustion of raw paper sludge (Raw-PS), hydrothermally treated paper sludge (HTT-PS), and a subbituminous coal (Sub-C), for comparison. The hydrothermal treatment (HTT) was conducted by a pilot-scale reactor at 197 °C (1.9 MPa) for 30 min. The results showed that all three samples extensively underwent primary fragmentation. Char attrition tests under inert conditions showed that Sub-C intensely experienced particle rounding off at the beginning, but after that it became very strong against mechanical abrasive attrition, followed by HTT-PS and Raw-PS, respectively. The oxidative char attrition tests showed that Sub-C exhibited an initial low amount of carbon elutriation rate followed by an attrition enhancement effect at later stages of burn-off, whereas for the Raw-PS and HTT-PS attrition was always lower than under inert conditions due to extensive postcombustion of fines. HTT-PS always produced a lower amount of elutriated carbon than Raw-PS and this indicates better combustion performance as well as lower unburned carbon emission. Finally, the Primary Ash Particle Size Distribution (PAPSD) of the three fuels was determined, showing that the paper sludge would contribute much more than coal to the ash bed inventory in a full-scale FB combustor. [ABSTRACT FROM AUTHOR]

When writing a research paper, significant effort is spent comparing the current work to other related studies. In general, these comparisons comprise the 'Related Work' section of the paper, with the relevant reference papers cited and analyzed. An automatic method for gathering and managing information about other researchers' reviews of reference papers would reduce the time and effort needed for such comparisons. Thus, in this paper, we propose a crawler that gathers the comments made by other researchers on the papers that are cited in the 'Related Work' section and listed in the 'Bibliography' or 'References' section of a research paper. The Reference Comments Crawler (RCC) system collects the text pertaining to the reference papers, providing useful information to researchers by extracting relevant data from the comments. The RCC considers different types of reference identifiers and the comment sentences are extracted based on these reference identifiers and user-defined extraction rule. Also, the RCC system extracts and provides the previous and subsequent sentences, labeled as PreSentences and PostSentences, as well as the comment sentences including the reference identifier. A series of experiments were performed to evaluate precision and recall, and the results showed that the RCC system can provide useful information with a high degree of precision and recall to the user. Furthermore, through these experiments, our system can assist researchers by reducing the time and effort spent comparing and analyzing related work. [ABSTRACT FROM AUTHOR]

Bamboo has being used as alternative raw material for construction, reinforcing fibers, paper production, among other applications. Although its recognized potentials as raw material, there are doubts about its environmental performance compared to traditional wood-based products, including paper production, which hinders bamboo-based paper plants in large scales. This study aims to assess the environmental performance of producing office paper from bamboo. Emergy synthesis (with 'm') and global warming potential indicators are calculated and compared with the traditional eucalyptus paper-based production. Results highlights the importance in including the renewability fractions of each input resources into emergy calculations for production systems with high human-labor intensity such as the bamboo agricultural production. Office paper produced from bamboo has similar renewability (28%), moderate environmental load (3.23 vs. 2.49), and emergy unsustainability (0.34 vs. 0.60) compared to paper produced from eucalyptus, but bamboo showed lower performance for global efficiency (568 vs. 442 sej/ton paper), emergy yield (1.09 vs. 1.49), and emergy investment (10.79 vs. 2.05). Focusing on global warming potential, office paper produced from bamboo releases 98 kgCO 2 eq. /ton paper compared to 56–267 kgCO 2 eq. /ton paper for eucalyptus. Notwithstanding, bamboo-based office paper demands four times more land area of agricultural production than eucalyptus, but it has a positive social aspect by requiring higher amount of direct human labor. This work shows the advantages of using eucalyptus rather than bamboo in producing office paper from an emergy and land demand perspectives, while global warming can still be considered inconclusive. Future efforts should consider a quantitative and qualitative analysis of human labor availability in both systems, as well an economic analysis to support discussions towards more sustainable office paper production from different raw materials. • Environmental load of bamboo and eucalyptus for office paper production are compared. • Bamboo has lower emergy performance than eucalyptus. • Including the renewability fraction of labor and services better reflects emergy results. • Bamboo paper emits 98kgCO2eq/ton, eucalyptus paper emits 56–267kgCO2eq/ton. • Bamboo paper needs 4x land compared to eucalyptus and requires more human labor. [ABSTRACT FROM AUTHOR]

The article discusses the positive pain reduction outcomes of a personalized care pathway for chronic knee pain post-total knee replacement.

Background Non-cellulose dried matrix spotting (DMS) cards are an alternative to filter paper (FP) for bloodspots. We compared the interpatient distributions of bloodspot areas between DMS and FP for a fixed volume of application of whole blood, and examined correlations of areas with hematocrit. Methods EDTA-whole blood adult patient samples ( n = 49; 25 males, 24 females) were utilized after routine measurement of hemoglobin and hematocrit. Replicate (4 ×) bloodspots were produced by bolus drop application of 50 μL whole blood via a fixed-volume pipettor to either FP or DMS. Dried bloodspot areas were determined by image analysis. Results Hematocrits (HCT) were normally distributed (HCT = 30.9 ± 5.3%). For both FP and DMS, bloodspot areas ( a , cm 2 ) across patients were normally distributed: for FP, a = 1.11 ± 0.056 cm 2 (± 5.0%); for DMS, a = 0.378 ± 0.037 cm 2 (± 9.9%). Relative bloodspot area differences across the population range were > 20% for both DMS and FP. Correlation of bloodspot areas to hematocrit was negative for FP ( r = − 0.80) but positive for DMS ( r = + 0.78). Conclusions Interpatient variation in blood volume per area is a preanalytical variable for both DMS and FP bloodspots. Hematocrit is but one interpatient variable, as correlations of fixed-volume bloodspot areas with hematocrit across patients were substantially inexact ( r 2 < 0.65). [ABSTRACT FROM AUTHOR]

The major focus of school education is the intellectual development of students and mathematics is a very effective subject in this regard, if taught and assessed properly. For this study, papers of SSC (Grade-10) for the years 2014 and 2015 set by the Board of Secondary Education, Karachi were scrutinized to know if the items of these papers had measured essential mathematical skills or not. These items were then compared with the items set by General Certificate of Education (GCE: O-Level), University of Cambridge Local Examinations Syndicate (UCLES) for mathematics papers, serving as a benchmark for this study to highlight the shortcomings. The results revealed that the items of SSC papers were highly biased towards 'Factual Knowledge' and 'Routine Procedures'. The study concluded that these items assess knowledge of facts and algorithms only and do not measure essential mathematical skills (involvement of higher levels of thinking processes) of students. The study recommends to improve the items of papers so that essential mathematical skills can be measured rather than the capacity of memorization because with this practice, thinking habits cannot be inculcated among students. [ABSTRACT FROM AUTHOR]

Cationized birch xylan was prepared and its use as a papermaking chemical was evaluated. The focus was on studying the effects of cationized birch xylan on the wet and dry strength of fine paper. The results of the laboratory experiments show that the addition of 3 percent of cationized birch xylan to birch kraft pulp improved the initial wet strength of the web by 30 percent compared to base stock at a solids content of 55%. Furthermore, the tensile stiffness of the wet web increased by approximately a third and the dry tensile strength improved by 26%, while the dry elastic modulus was not changed. The improvements in the strength properties were clear when compared to the base stock, but not as high as achieved with conventionally used cationized starch. The difference between the xylan and starch is most likely due to the shorter polymer chain length of the cationized xylan. [ABSTRACT FROM AUTHOR]

Due to an increasing demand, companies have started producing recycled products. However, little is known about the specific purchase behavior. Hence, this study analyses the factors influencing purchase intention for recycled products including differences related to different types of products and between Germany and South Africa. A quantitative study in Germany (n = 603) and South Africa (n = 692). shows that purchase intention is significantly higher in South Africa. The influencing factors (individual, product, and context related constructs) are the same in both countries, but they differ regarding their strength. Thus, the factor "attitude/environmental concern" has the strongest influence in South Africa, while it is "value/accessibility" in Germany. Furthermore, purchase intention for mobile phones is generally smaller than for t‐shirts and toilet paper. Purchase intention for recycled t‐shirts is significantly higher in South Africa than in Germany. [ABSTRACT FROM AUTHOR]

BACKGROUND: Workplace inspections are applied to facilitate the adherence to the occupational health and safety regulations. The Iranian Ministry of Health introduced a new software system for tablets to inspect workplaces. OBJECTIVES: The aim of this study was to take measurements of the usability, mental workload, and mood of inspectors. METHODS: Inspectors used both pen-and-paper and tablet methods to inspect the automotive industry in a mixed-method procedure. The NASA-TLX score, QUIS score, I-PANAS (SF) situation, inspection time, and number of errors were collected throughout the procedure. The differences were investigated using a paired sample and the Wilcoxon signed ranks test. RESULTS: In terms of efficacy, using the tablet resulted in lower error rates, but it took longer to complete the inspection task (P < 0.001). Participants perceived a lower workload when inspecting with a tablet rather than the traditional method. (Mental Demand: p < 0.002, Performance: p < 0.009, Effort: p < 0.012, TLX: p < 0.002 based on various subcomponents of NASA-TLX). The newly introduced system's usability was insufficient. CONCLUSION: Although the use of tablets has improved safety inspections, ergonomic redesign of the system and consideration of a user-centered approach, as well as inspector training, can make the system more likely to succeed. [ABSTRACT FROM AUTHOR]

Abstract: In the present work, the analytical potential of laser induced breakdown spectroscopy (LIBS) for the discrimination of paper types and prints made by digital printers on these papers was assessed. Six different paper types (including standard office papers, color paper and non-bleached paper), and eight printers (including laser and inkjet, as well as color and black printers) were included in the study. Only one or two laser shots were delivered to each sample in order to cause minimal sample destruction and provide maximum spatial resolution. The statistical evaluation of LIBS spectra was performed by multiple methods including three comparative functions (linear correlation, sum of squared deviations and overlapping integral) as well as two advanced statistical methods (multivariate curve resolution alternating least squares (MCR-ALS) combined with classification tree and discriminant analysis (DA)). The best classification results were obtained with the newly introduced MCR-ALS/DA approach, which proved to be 96.3% accurate in the identification of the paper type and 83.3% accurate in the identification of the printer type, based on the LIBS spectrum collected from just a single laser shot to the sample. It was found that the UV part of the LIBS spectrum can be used most efficiently for the discrimination. [Copyright &y& Elsevier]

• The use of the ProFibro app for six weeks was not more effective than the use of a traditional paper book with similar content for health-related quality of life, symptoms, or self-care agency in individuals with fibromyalgia. • Improvements on severity of symptoms in both groups suggest that the self-care program using a mobile app or a paper book may be beneficial in individuals with fibromyalgia. • The Sleep Strategies was the most used function of the ProFibro app, followed by the Exercise Program, and the diary for the practice of gratitude. The ProFibro application (app) was developed as a Mobile Health resource to promote self-care in fibromyalgia management. This study aimed to assess the effects of the use of the ProFibro app for six weeks compared to the use of a traditional paper book of similar content to improve health-related quality of life, symptoms, and self-care agency in individuals with fibromyalgia. Forty individuals with fibromyalgia were included in this randomized, single-blind, parallel trial. One group received intervention content using the ProFibro app on a smartphone while the other received similar information using a paper book. Participants were assessed at baseline and after six weeks. The primary outcome was the Revised Fibromyalgia Impact Questionnaire. Secondary outcomes were Widespread Pain Index, Pain Visual Analog Scale, Symptom Severity Scale, and Appraisal of Self-Care Agency Scale – Revised. No differences in changes were found between groups at the end of the treatment for any outcome. Both groups showed improvements in symptom severity. The use of the ProFibro app for six weeks was not more effective than the use of a traditional paper book with similar content for health-related quality of life, symptoms, or self-care agency in individuals with fibromyalgia. Both groups showed improvements from baseline on severity of symptoms, suggesting that the self-care program using a mobile app or a paper book may be beneficial for individuals with fibromyalgia. [ABSTRACT FROM AUTHOR]

Recycled paper is extensively used worldwide. In the last decades, its market has expanded considerably. The increasing use of recycled paper in papermaking has led to the production of paper containing several types of impurities. Consequently, wastepaper mills are forced to implement quality control schemes for evaluating the incoming wastepaper stock, thus guarantying the specifications of the final product. The main objective of this work is to present a fast and reliable system for identifying different paper types. Therefore, undesirable paper types can be refused, improving the performance of the paper machine and the final quality of the paper manufactured. For this purpose, two fast techniques, i.e., Fourier transform midinfrared (FTIR) and reflectance near infrared (NIR), were applied to acquire the infrared spectra of the paper samples. Next, four processing multivariate methods, i.e., principal component analysis, canonical variate analysis (CVA), extended CVA (ECVA), and support vector machines (SVMs), were employed in the feature-extraction or dimension-reduction stage. Afterward, the k nearest neighbor (kNN) algorithm was used in the classification phase. Experimental results show the usefulness of the proposed methodology and the potential of both FTIR and NIR spectroscopic methods. Using the FTIR spectrum in association with SVM and kNN, the system achieved a maximum classification accuracy of 100%, whereas using the NIR spectrum in association with ECVA or SVM and kNN, the system achieved a maximum classification accuracy of 96.4%. [ABSTRACT FROM PUBLISHER]

This paper reports on a study evaluating the value of a documentary as a key medium to communicate design research. We present information from the evaluation of a second screen application using video as well as a scientific paper, in order to assess how the efficacy and usefulness of using such a documentary for science communication is perceived when compared to a scientific paper. Techniques of a method called Design Documentary , developed to inspire design research teams through video, combined with science journalism were the basis of the production. Twelve researchers and students were shown the documentary and asked to read the paper in counter-balanced order. Our qualitative results show that the documentary as a complementary means of communication can bring benefits to research communication, since it delivers information the paper cannot provide. However, the fact the video is not suited for peer review might restrict its place when compared to the paper. On the overall, participants thought both formats are valuable and are complementary. [ABSTRACT FROM AUTHOR]

Abstract: Paper degradation has been studied extensively over the past few decades from both the conservation and the material science perspectives. This review focuses on the quantifiable impacts of the environment and material composition, from the viewpoint of long-term storage of historic paper-based collections. Therefore, temperature, relative humidity and their variation, and pollution are of major interest while photoinitiated processes are covered only briefly. New experiments comparing the effects of the most abundant indoor pollutants (NO2, acetic acid and formaldehyde) and the effects of fluctuating temperature and relative humidity are also presented as part of the discussion. This work highlights the need for revision of the existing dose–response (damage) functions for paper and their further development. [Copyright &y& Elsevier]

Bisphenol A (BPA) is used in a variety of consumer products, including some paper products, particularly thermal receipt papers, for which it is used as a color developer. Nevertheless, little is known about the magnitude of BPA contamination or human exposure to BPA as a result of contact with paper and paper products. In this study, concentrations of BPA were determined in 15 types of paper products (n = 202), including thermal receipts, flyers, magazines, tickets, mailing envelopes, newspapers, food contact papers, food cartons, airplane boarding passes, luggage tags, printing papers, business cards, napkins, paper towels, and toilet paper, collected from several cities in the USA. Thermal receipt papers also were collected from Japan, Korea, and Vietnam. BPA was found in 94% of thermal receipt papers (n = 103) at concentrations ranging from below the limit of quantitation (LOQ, 1 ng/g) to 13.9 mg/g (geometric mean: 0.211 mg/g). The majority (81%) of other paper products (n = 99) contained BPA at concentrations ranging from below the LOQ to 14.4 μg/g (geometric mean: 0.016 μg/g). Whereas thermal receipt papers contained the highest concentrations of BPA (milligram-per-gram), some paper products, including napkins and toilet paper, made from recycled papers contained microgram-per-gram concentrations of BPA. Contamination during the paper recycling process is a source of BPA in paper products. Daily intake (DI) of BPA through dermal absorption was estimated based on the measured BPA concentrations and handling frequency of paper products. The daily intake of BPA (calculated from median concentrations) through dermal absorption from handling of papers was 17.5 and 1300 ng/day for the general population and occupationally exposed individuals, respectively; these values are minor compared with exposure through diet. Among paper products, thermal receipt papers contributed to the majority (>98%) of the exposures. [ABSTRACT FROM AUTHOR]

Microbial communities play a vital role in maintaining soil health. A multiphasic approach to assess the effect of pulp and paper mill effluent on both the structure and function of microbial soil communities is taken. Bacterial communities from agricultural soils irrigated with pulp and paper mill effluent were compared to communities form soils irrigated with well water. Samples were taken from fields in the state of Uttarakhand, India, where pulp and paper mill effluent has been used for irrigation for over 25 years. Comparisons of bacterial community structure were conducted using sequencing of the 16S rRNA gene from both isolates and clone libraries attained from the soil. Community-level physiological profiling was used to characterize the functional diversity and catabolic profile of the bacterial communities. The multiphasic approach using both physiological and molecular techniques proved to be a powerful tool in evaluating the soil bacterial community population and population differences therein. A significant and consistent difference in the population structure and function was found for the bacterial communities from soil irrigated with effluent in comparison to fields irrigated with well water. The diversity index parameters indicated that the microbial community in pulp and paper mill effluent irrigated fields were more diverse in both structure and function. This suggests that the pulp and paper mill effluent is not having a negative effect on the soil microbial community, but in fact may have a positive influence. In terms of soil health, this finding supports the continued use of pulp and paper mill effluent for irrigation. This is however only one aspect of soil health which was evaluated. Further studies on soil resistance and robustness could be undertaken to holistically evaluate soil health in this situation. [ABSTRACT FROM AUTHOR]