Search

A computationally efficient method to study the in-plane and out-of-plane dimensional instability of thin paper sheets under the influence of moisture changes is presented. The method explicitly resolves the bonded and the free segments of fibers in the sheet, capturing the effect of anisotropic hygroexpansion at the fiber level. The method is verified against a volumetric model. The importance of longitudinal fiber hygroexpansion is demonstrated in spite of the absolute value of longitudinal hygroexpansion being an order of magnitude lower than the transverse hygroexpansion component. Finally, the method is used to demonstrate the formation of macroscopic sheet curl due to a moisture gradient in structurally uniform sheets in the absence of viscoelastic or plastic constitutive behavior and through-thickness residual stress profiles. [ABSTRACT FROM AUTHOR]

Abstract A number of problems associated with dimensional stability of paper products have to do with hygroexpansion in response to changes in humidity or moisture content. The main underlying mechanism of hygroexpansion in paper is the effect of the change of fiber cross-sections transferred through fiber bonds. In fact, the transverse expansion of fibers can be an order of magnitude greater than the longitudinal expansion. Addressing such problems using modeling on the microscale is associated with large computational costs since both the bonds and the fibers need to be resolved. We present a method for modeling the hygro or thermal expansion of interconnected fiber networks modeled with beam elements and connected through beam-to-beam contact. Being a line structure, beams can only support pointwise contact, which poses a challenge for modeling the force transfer induced by the deformation of the cross-sections at the contact point. The idea of implementing the stress transfer is to use a concurrent multiscale approach in which the bond level is resolved in detail using the configuration of the fibers and the computed strains are passed over to the beam elements. We verify and prove the applicability of this approach by comparing it with continuum models. We demonstrate the advantage of using this approach in terms of its tremendous saving in time. The use of beam models for modeling the hygro- or thermal expansion of fiber networks enables considering relevant sizes in the problems involving dimensional stability, in particular those associated with embedded inhomogeneities. We will show the applicability of the model by providing insights into published experimental observations on the hygroexpansion properties of paper products. Finally, we will demonstrate that the use of a 2D model to simulate the inter-fiber bonds in a network, not only leads to underestimation of out-of-plane deformations, but also to overestimation of the contribution of the transverse deformation of fibers to the in-plane dimensional change of the network. [ABSTRACT FROM AUTHOR]

Abstract: Platinum/aluminum oxide (Pt/Al2O3) catalyst powders were successfully fabricated to give paper-like composites using ceramic fibers by a papermaking technique. As-prepared composites, called paper-structured catalysts, possessed a fiber-network microstructure on which the Pt/Al2O3 powders were scattered. The paper-structured catalysts were subjected to a catalytic reduction process of nitrogen oxides (), and demonstrated a higher performance than the original Pt/Al2O3 powders and a commercial honeycomb catalyst. A simple mixture of catalyst powders and inorganic fibers was not effective, suggesting that the characteristic porous microstructure (average pore size: ca. porosity: ca. 70%) in the paper-structured catalyst possibly contributed to the efficient reduction. Besides, the paper-structured catalyst exhibited a quick response in the catalytic reduction at a rapidly increasing reaction temperature as compared to the honeycomb catalyst. The paper composite is flexible, lightweight and easy to handle; thus the paper-structured catalyst is expected to be a promising catalytic material for exhaust gas purification. [Copyright &y& Elsevier]