Search

Abstract: External wall insulation plays an important role in building energy consumption through affecting cooling and heating energy uses. In this paper, a study on the effects of external wall insulation thickness on annual cooling and heating energy uses under different Chinese climates is reported. Firstly, two indexes: Energy Gain Ratio (EGR) and Relative Variation Ratio (RVR) of the sum of annual cooling and heating energy uses, to assess the effects of external wall insulation thickness on energy saving potential are introduced. Secondly, a model space having four different exterior zones facing four different orientations in an office building is presented and the settings of the model space described. Lastly, the simulated annual cooling and heating energy uses for the four different exterior zones at different external wall insulation thicknesses under three different climates in China, Guangzhou, Shanghai and Beijing, are reported. The results suggested that energy saving was significant by increasing the external wall insulation thickness in exterior zones facing all orientations under Beijing’s climate, since the heating energy use was dominant and can be reduced remarkably with the increase in insulation thickness. Under Shanghai’s climate, increasing external wall insulation thickness to over 26mm would not reduce the sum of annual heating and cooling energy uses in the south-facing exterior zone, but would help save energy in exterior zones facing the other three orientations. For all exterior zones under Guangzhou’s climate, it was, however, hardly possible to reduce the sum of annual heating and cooling energy uses by increasing the external wall insulation thickness. [Copyright &y& Elsevier]

Abstract: Operation mode of combined cooling heating and power (CCHP) system determines its energetic and environmental performances. This paper analyzes the energy flows of CCHP system and separated production (SP) system. The fuel energy consumptions of CCHP system following electrical demand management (EDM) and thermal demand management (TDM) are deduced respectively. Three indicators: primary energy saving, exergy efficiency and CO2 emission reduction, are employed to evaluate the performances of CCHP system for a commercial building in Beijing, China. The feasibility analysis shows that the performance of CCHP system is strictly dependent upon building energy demands. The selection of CCHP operation modes is systemically based on building loads, CCHP system and local SP system. The calculation results conclude that CCHP system in winter under EDM achieves more benefits than in summer. The sensitivity discussion indicates that the coefficient of performance for cooling and the efficiency of electricity generation are the most sensitive variables to the energetic and environmental performances of CCHP system. [Copyright &y& Elsevier]