Search

Between 30 May and 6 June 2019 a series of new flanks eruptions interested the south-east flanks of Mt. Etna, Italy, forming lava flows and explosive activity that was most intense during the first day of the eruption, as a result, volcanic particles were dispersed towards Greece. Lidar measurements performed at the PANhellenic GEophysical observatory of Antikythera (PANGEA) of the National Observatory of Athens (NOA), in Greece, reveal the presence of particles of volcanic origin above the area the days following the eruption. FLEXible PARTicle dispersion model (FLEXPART) simulations and satellite-based SO2 observations from the TROPOspheric Monitoring Instrument onboard the Sentinel-5 Precursor (TROPOMI/S5P), confirm the volcanic plume transport from Etna towards PANGEA and possible mixing with co-existing desert dust particles. Lidar and modeled values are in agreement and the derived sulfate mass concentration is approximately 15 &mu, g/m3. This is the first time that Etna volcanic products are monitored at Antikythera station, in Greece with implications for the investigation of their role in the Mediterranean weather and climate.

Preferential particle orientation has been previously reported for desert dust and attributed on atmospheric electricity (Ulanowski et al., 2007). Depending on its strength, the total electric field within the dust layer can: (a) counteract the gravitational settling of large particles and (b) cause a preferential orientation of the non-spherical particles along the vertical direction (Fucks, 1958; Ulanowski et al., 2007). Both effects change the particle aerodynamics and impact radiative transfer. Here, we quantify the electrical and aerodynamic torques on the non-spherical prolate model that is frequently assumed for dust particles. The transport of these particles is assumed to only depend on the influence of electric and gravitational fields. We provide an analytical approximation for the calculation of the mean orientation angle of both charged and uncharged dust particles. We find that electric fields with strength greater than 60 kV/m are required for the alignment of particles up to 20 μm in diameter, with the electric field lines. If the particles are moving with the same speed and in the same direction with the wind, the aerodynamic torque is zero and particle orientation along the electric field requires 1–2 orders of magnitude lower electric field strengths.

The effects of non sphericity and particle orientation on mineral dust gravitational settling are studied for prolate spheroids in the range of Reynolds number up to 100. New drag coefficients for prolate spheroids are defined that take into account the orientation of the particle. The drag coefficients along with the slip correction factors are applied to the momentum equation, which is numerically solved for the calculation of the steady state velocity of the particle with respect to the air. As the aspect ratio increases, the settling velocity of ellipsoids decreases compared to the settling velocity of spherical particles, and the non spherical particles can remain in the atmosphere for longer periods. Moreover, the settling velocity of horizontally oriented particles is smaller than the settling velocity of vertically oriented particles. Assuming that at time t = 0 s the particles are at altitude equal to 6 km, non spherical particles that are horizontally oriented, with aspect ratio equal to 2.4, and polar diameter up to ∼ 24 μ m can remain in the atmosphere for 5 days, while particles with polar diameter up to ∼ 17 μ m can remain in the atmosphere for 10 days. In the case that the particles are vertically oriented, particles with polar diameter up to ∼ 22 μ m can remain in the atmosphere for 5 days, and particles with polar diameter up to ∼ 15 μ m can remain in the atmosphere for 10 days.

Six months of stratospheric aerosol observations with the European Aerosol Research Lidar Network (EARLINET) from August 2017 to January 2018 are presented. The decay phase of an unprecedented, record-breaking stratospheric perturbation caused by wildfire smoke is reported and discussed in terms of geometrical, optical, and microphysical aerosol properties. Enormous amounts of smoke were injected into the upper troposphere and lower stratosphere over fire areas in western Canada on 12 August 2017 during strong thunderstorm–pyrocumulonimbus activity. The stratospheric fire plumes spread over the entire Northern Hemisphere in the following weeks and months. Twenty-eight European lidar stations from northern Norway to southern Portugal and the eastern Mediterranean monitored the strong stratospheric perturbation on a continental scale. The main smoke layer (over central, western, southern, and eastern Europe) was found at heights between 15 and 20 km since September 2017 (about 2 weeks after entering the stratosphere). Thin layers of smoke were detected at heights of up to 22–23 km. The stratospheric aerosol optical thickness at 532 nm decreased from values > 0.25 on 21–23 August 2017 to 0.005–0.03 until 5–10 September and was mainly 0.003–0.004 from October to December 2017 and thus was still significantly above the stratospheric background (0.001–0.002). Stratospheric particle extinction coefficients (532 nm) were as high as 50–200 Mm−1 until the beginning of September and on the order of 1 Mm−1 (0.5– 5 Mm−1 ) from October 2017 until the end of January 2018. The corresponding layer mean particle mass concentration was on the order of 0.05–0.5 µg m−3 over these months. Soot particles (light-absorbing carbonaceous particles) are efficient ice-nucleating particles (INPs) at upper tropospheric (cirrus) temperatures and available to influence cirrus formation when entering the tropopause from above. We estimated INP concentrations of 50–500 L−1 until the first days in September and afterwards 5–50 L−1 until the end of the year 2017 in the lower stratosphere for typical cirrus formation temperatures of −55 ◦C and an ice supersaturation level of 1.15. The measured profiles of the particle linear depolarization ratio indicated a predominance of nonspherical smoke particles. The 532 nm depolarization ratio decreased slowly with time in the main smoke layer from values of 0.15–0.25 (August–September) to values of 0.05–0.10 (October–November) and < 0.05 (December–January). The decrease of the depolarization ratio is consistent with aging of the smoke particles, growing of a coating around the solid black carbon core (aggregates), and thus change of the shape towards a spherical form. We found ascending aerosol layer features over the most southern European stations, especially over the eastern Mediterranean at 32–35◦ N, that ascended from heights of about 18–19 to 22–23 km from the beginning of October to the beginning of December 2017 (about 2 km per month). We discuss several transport and lifting mechanisms that may have had an impact on the found aerosol layering structures.

The Cloud-Aerosol Transport System (CATS) lidar on board the International Space Station (ISS) operated from 10 February 2015 to 30 October 2017 providing rangeresolved vertical backscatter profiles of Earth’s atmosphere at 1064 and 532 nm. The CATS instrument design and ISS orbit lead to a higher 1064 nm signal-to-noise ratio than previous space-based lidars, allowing for direct atmospheric calibration of the 1064 nm signals. Nighttime CATS version 3- 00 data were calibrated by scaling the measured data to a model of the expected atmospheric backscatter between 22 and 26 km a.m.s.l. (above mean sea level). The CATS atmospheric model is constructed using molecular backscatter profiles derived from Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA2) reanalysis data and aerosol scattering ratios measured by the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP). The nighttime normalization altitude region was chosen to simultaneously minimize aerosol loading and variability within the CATS data frame, which extends from 28 to − 2 km a.m.s.l. Daytime CATS version 3-00 data were calibrated through comparisons with nighttime measurements of the layer-integrated attenuated total backscatter (iATB) from strongly scattering, rapidly attenuating opaque cirrus clouds. The CATS nighttime 1064 nm attenuated total backscatter (ATB) uncertainties for clouds and aerosols are primarily related to the uncertainties in the CATS nighttime calibration technique, which are estimated to be ∼ 9 %. Median CATS V3-00 1064 nm ATB relative uncertainty at night within cloud and aerosol layers is 7 %, slightly lower than these calibration uncertainty estimates. CATS median daytime 1064 nm ATB relative uncertainty is 21 % in cloud and aerosol layers, similar to the estimated 16 %– 18 % uncertainty in the CATS daytime cirrus cloud calibration transfer technique. Coincident daytime comparisons between CATS and the Cloud Physics Lidar (CPL) during the CATS-CALIPSO Airborne Validation Experiment (CCAVE) project show good agreement in mean ATB profiles for clearair regions. Eight nighttime comparisons between CATS and the PollyXT ground-based lidars also show good agreement in clear-air regions between 3 and 12 km, with CATS having a mean ATB of 19.7 % lower than PollyXT. Agreement between the two instruments (∼ 7 %) is even better within an aerosol layer. Six-month comparisons of nighttime ATB values between CATS and CALIOP also show that iATB comparisons of opaque cirrus clouds agree to within 19 %. Overall, CATS has demonstrated that direct calibration of the 1064 nm channel is possible from a space-based lidar using the atmospheric normalization technique.

The absorbing and scattering nature of aerosols affects the total radiative forcing and is quantified by single scattering albedo (SSA), which is defined as the absorption to total extinction ratio. There are limited measurements of SSA in the ultraviolet (UV) irradiance spectrum, hence, the influence of SSA on incoming UV irradiance has not been explored in great depth. In the present study, UV irradiance was calculated and compared using different SSA datasets retrieved at Athens, Greece during 2009–2014; including SSA time series from Ultraviolet Multi-Filter Radiometer (UVMFR) at 332 and 368 nm, SSA from AERONET at 440 nm, from OMI satellite at 342.5 nm and AeroCom climatological database at 300 nm. Irradiances were estimated using a radiative transfer model (RTM). Comparisons of these results revealed that relative differences of UVA and UVB could be as high as 20%, whilst average relative differences varied from 2% to 8.7% for the entire experimental period. Both UVA and UVB drop by a rate of ~12% for 0.05 aerosol absorption optical depth in comparison to ones estimated with the use of SSA at visible range. Brewer irradiance measurements at 324 nm were used to validate modeled monochromatic irradiances and a better agreement was found when UVMFR SSAs were used with an average difference of 0.86%. However, when using visible or climatological input, relative differences were estimated +4.91% and +4.15% accordingly.

This study considers the various factors that regulate nutrients supply in the Red Sea. Multi-sensor observation and reanalysis datasets are used to examine the relationships among dust deposition, sea surface temperature (SST), and wind speed, as they may contribute to anomalous phytoplankton blooms, through time-series and correlation analyses. A positive correlation was found at 0–3 months lag between chlorophyll-a (Chl-a) anomalies and dust anomalies over the Red Sea regions. Dust deposition process was further examined with dust aerosols’ vertical distribution using satellite lidar data. Conversely, a negative correlation was found at 0–3 months lag between SST anomalies and Chl-a that was particularly strong in the southern Red Sea during summertime. The negative relationship between SST and phytoplankton is also evident in the continuously low levels of Chl-a during 2015 to 2016, which were the warmest years in the region on record. The overall positive correlation between wind speed and Chl-a relate to the nutritious water supply from the Gulf of Aden to the southern Red Sea and the vertical mixing encountered in the northern part. Ocean Color Climate Change Initiative (OC-CCI) dataset experience some temporal inconsistencies due to the inclusion of different datasets. We addressed those issues in our analysis with a valid interpretation of these complex relationships.

A record-breaking dust episode took place in Crete on 22 March 2018. The event was characterized by surface concentrations exceeding 1 mg m−3for a period of 4–7 h, reaching record values higher than 6 mg m−3at the background station of Finokalia. We present here a detailed analysis of the atmospheric dynamical processes during this period, to identify the main reasons for such extreme dust advection over Crete. At the synoptic scale, the weakening of the polar vortex and the meridional transport of polar air masses at upper tropospheric layers resulted in a strong jet streak over north Africa and Central Mediterranean and corresponding tropospheric folding that brought cold stratospheric air in mid and upper troposphere. Cyclogenesis occurred at the Gulf of Sirte in Libya, resulting in strong winds over the north-east parts of Libya, enhancing particle emissions. The dust plume traveled at low altitude (0.5–3 km) along the warm conveyor belt preceding the depression cold front. This type of dusty southerly wind is commonly known as “Khamsin”. As the flow approached Crete, Foehn winds at the lee side of the island favored the downward mixing of dust towards the surface, resulting in local maxima of PM10in Heraklion and Finokalia. The analysis is based on the combination of high-resolution WRF-Chem simulations reaching up to 1 × 1 km grid space over Crete, ground-based and satellite remote sensing of the dust plumes (PollyXT LiDAR, MSG-SEVIRI, MODIS) and detailed surface aerosol in situ measurements at urban (Heraklion, Chania, Greece) and background (Finokalia) stations in Crete

Alignment of irregularly shaped dust aerosols leading to linear dichroism has been reported in atmospheric layers. The present study intents to quantify the excess linear polarization of direct solar radiation propagating through atmospheric layers, when these contain oriented dust particles. In order to record the linear polarization, we have used the Solar Polarimeter (SolPol). SolPol is an instrument that measures the polarization of direct solar irradiance at 550nm. It is installed on an astronomical tracker in order target the solar disk. Using the measurements, the Stokes parameters are retrieved (I, Q/I, U/I and V/I) with an accuracy of ~1% and precision of 1 ppm. Collocated measurements of a sun-photometer (Aerosol Robotic Network; AERONET) and lidar are used to quantify the Aerosol Optical Depth (AOD) and identify the vertical distribution of dust layers, respectively. We will present indications of dust particle orientation recorded at the PANGEA station in the island of Antikythera, Greece, and at Nicosia, Cyprus during the preparatory phase for the ASKOS campaign in July 2021. The relation of the linear polarization of the solar irradiance to other optical properties of the dust layer is investigated.

We present smoke lidar measurements from the Canadian fires of 2017. The advected smoke layers over Europe are detected at both tropospheric and stratospheric heights, with the latter presenting non-typical values of the Particle Linear Depolarization Ratio (PLDR) with strong wavelength dependence from the UV to the Near-IR. Specifically, the PLDR values are of the order of 22, 18 and 4% at 355, 532 and 1064 nm respectively. In an attempt to interpret these results, we apply the hypothesis that smoke particles have near-spherical and/or more complicated shapes. Scattering calculations with the T-matrix code support other findings in the literature ([1]- [2]), showing that the near-spherical shape (or closely similar shapes as in [2]), is the only shape that has been shown to reproduce the observed PLDR and Lidar Ratio (LR) values of the stratospheric smoke particles at the three measurement wavelengths.

We present a 3-D climatology of the desert dust distribution over South and East Asia derived using CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation) data. To distinguish desert dust from total aerosol load we apply a methodology developed in the framework of EARLINET (European Aerosol Research Lidar Network). The method involves the use of the particle linear depolarization ratio and updated lidar ratio values suitable for Asian dust, applied to multiyear CALIPSO observations (January 2007–December 2015). The resulting dust product provides information on the horizontal and vertical distribution of dust aerosols over South and East Asia along with the seasonal transition of dust transport pathways. Persistent high D_AOD (dust aerosol optical depth) values at 532 nm, of the order of 0.6, are present over the arid and semi-arid desert regions. Dust aerosol transport (range, height and intensity) is subject to high seasonality, with the highest values observed during spring for northern China (Taklimakan and Gobi deserts) and during summer over the Indian subcontinent (Thar Desert). Additionally, we decompose the CALIPSO AOD (aerosol optical depth) into dust and non-dust aerosol components to reveal the non-dust AOD over the highly industrialized and densely populated regions of South and East Asia, where the non-dust aerosols yield AOD values of the order of 0.5. Furthermore, the CALIPSO-based short-term AOD and D_AOD time series and trends between January 2007 and December 2015 are calculated over South and East Asia and over selected subregions. Positive trends are observed over northwest and east China and the Indian subcontinent, whereas over southeast China trends are mostly negative. The calculated AOD trends agree well with the trends derived from Aqua MODIS (Moderate Resolution Imaging Spectroradiometer), although significant differences are observed over specific regions., How to cite. Proestakis, E., Amiridis, V., Marinou, E., Georgoulias, A. K., Solomos, S., Kazadzis, S., Chimot, J., Che, H., Alexandri, G., Binietoglou, I., Daskalopoulou, V., Kourtidis, K. A., de Leeuw, G., and van der A, R. J.: Nine-year spatial and temporal evolution of desert dust aerosols over South and East Asia as revealed by CALIOP, Atmos. Chem. Phys., 18, 1337–1362, https://doi.org/10.5194/acp-18-1337-2018, 2018.

We present a3-D climatology of the desert dust distribution over South and East Asia derived using CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation) data. To distinguish desert dust from total aerosol load we apply amethodology developed in the framework of EARLINET (European Aerosol Research Lidar Network). The method involves the use of the particle linear depolarization ratio and updated lidar ratio values suitable for Asian dust, applied to multiyear CALIPSO observations (January 2007–December 2015). The resulting dust product provides information on the horizontal and vertical distribution of dust aerosols over South and East Asia along with the seasonal transition of dust transport pathways. Persistent high D_AOD (dust aerosol optical depth) values at 532 nm, of the order of 0.6, are present over the arid and semi-arid desert regions. Dust aerosol transport (range, height and intensity) is subject to high seasonality, with the highest values observed during spring for northern China (Taklimakan and Gobi deserts) and during summer over the Indian subcontinent (Thar Desert). Additionally, we decompose the CALIPSO AOD (aerosol optical depth) into dust and non-dust aerosol components to reveal the non-dust AOD over the highly industrialized and densely populated regions of South and East Asia, where the non-dust aerosols yield AOD values of the order of 0.5. Furthermore, the CALIPSO-based short-term AOD and D_AOD time series and trends between January 2007 and December 2015 are calculated over South and East Asia and over selectedsubregions. Positive trends are observed over northwest and east China and the Indian subcontinent, whereas over southeast China trends are mostly negative. The calculated AOD trends agree well with the trends derived from Aqua MODIS (Moderate Resolution Imaging Spectroradiometer), although significant differences are observed over specific regions.

A record-breaking dust episode took place in Crete on 22 March 2018. The event was characterized by surface concentrations exceeding 1 mg m−3 for a period of 4–7 h, reaching record values higher than 6 mg m−3 at the background station of Finokalia. We present here a detailed analysis of the atmospheric dynamical processes during this period, to identify the main reasons for such extreme dust advection over Crete. At the synoptic scale, the weakening of the polar vortex and the meridional transport of polar air masses at upper tropospheric layers resulted in a strong jet streak over north Africa and Central Mediterranean and corresponding tropospheric folding that brought cold stratospheric air in mid and upper troposphere. Cyclogenesis occurred at the Gulf of Sirte in Libya, resulting in strong winds over the north-east parts of Libya, enhancing particle emissions. The dust plume traveled at low altitude (0.5–3 km) along the warm conveyor belt preceding the depression cold front. This type of dusty southerly wind is commonly known as “Khamsin”. As the flow approached Crete, Foehn winds at the lee side of the island favored the downward mixing of dust towards the surface, resulting in local maxima of PM10 in Heraklion and Finokalia. The analysis is based on the combination of high-resolution WRF-Chem simulations reaching up to 1 × 1 km grid space over Crete, ground-based and satellite remote sensing of the dust plumes (PollyXT LiDAR, MSG-SEVIRI, MODIS) and detailed surface aerosol in situ measurements at urban (Heraklion, Chania, Greece) and background (Finokalia) stations in Crete

We present smoke lidar measurements from the Canadian fires of 2017. The advected smoke layers over Europe are detected at both tropospheric and stratospheric heights, with the latter presenting non-typical values of the Particle Linear Depolarization Ratio (PLDR) with strong wavelength dependence from the UV to the Near-IR. Specifically, the PLDR values are of the order of 22, 18 and 4% at 355, 532 and 1064 nm respectively. In an attempt to interpret these results, we apply the hypothesis that smoke particles have near-spherical and/or more complicated shapes. Scattering calculations with the T-matrix code support other findings in the literature ([1]- [2]), showing that the near-spherical shape (or closely similar shapes as in [2]), is the only shape that has been shown to reproduce the observed PLDR and Lidar Ratio (LR) values of the stratospheric smoke particles at the three measurement wavelengths.