Search

Rate of penetration management is a matter of importance in drilling operations and it has been used in some research studies. Although conventional approaches for rate of penetration management are mainly focused on analytical and semi-analytical models, several correlations have also been developed for this purpose. The history of rate of penetration management studies extends back more than half a century and ever since, research interest in this concept has never declined, making it a focus of industry and academic studies. In this article, some of these studies are reviewed to achieve a better understanding of rate of penetration management concept, its financial benefits and also its research capacities. This review reveals the most common rate of penetration management methods which applied analytical, semi-analytical and empirical correlations in different fields around the world. In other words, the main purpose of this study is to evaluate the research studies in which different models and correlations have been used as the main approach for rate of penetration management. Based on the results of this review, the best models for performing rate of penetration management studies and the best objective functions for optimization algorithms are introduced. Cited as: Najjarpour, M., Jalalifar, H., Norouzi-Apourvari, S. A review on half a century of experience in rate of penetration management: Application of analytical, semi-analytical and empirical models. Advances in Geo-Energy Research, 2021, 5(3): 252-273, doi: 10.46690/ager.2021.03.03

Asphaltene adsorption on reservoir rock minerals causes wettability alteration and pore plugging which subsequently reduces crude oil production. Also, it has a negative effect on the efficiency of production and enhanced oil recovery operations. In this study, the adsorption of extracted asphaltenes of two samples of Iranian oil fields on dolomite, quartz, and magnetite was investigated in two-and three-phase systems in both static and dynamic flow modes. Mineral adsorbents were analyzed by Brunauer–Emmett–Teller and X-ray fluorescence methods. Also, several laboratory tests including elemental analysis, field emission scanning electron microscopy, and Fourier transform infrared spectroscopy were carried out to characterize asphaltenes. The results showed that in addition to the effect of known parameters such as asphaltenes concentration and specific surface area of the solid phase, the water phase also affects the amount of asphaltenes adsorption. The adsorption amount of asphaltenes increases with increasing the specific surface area of adsorbent (decreasing particle size) and increasing the initial concentration of asphaltenes, and decreases with the addition of water to the two-phase system. The static adsorption amount of asphaltenes in a two-phase system can be up to 90% higher than the adsorption amount in a three-phase system. Doubling the fluid flow rate in dynamic adsorption significantly (by about 20%) reduces the asphaltenes adsorption, which could be a sign of physical adsorption of asphaltenes on adsorbents. The structure and elemental composition of asphaltenes also have a significant effect on asphaltenes adsorption. The asphaltene sample, which had a more aromatic nature and high nitrogen content, had higher adsorption on reservoir rock minerals. Finally, fitting the adsorption equilibrium models with experimental data reveals that the adsorption isotherm model depends on the type and particle size of the adsorbents and the concentration and type of asphaltenes. Cited as : Mohammadi, M.R., Bahmaninia, H., Ansari, S., Hemmati-Sarapardeh, A., Norouzi-Apourvari, S., Schaffie, M., Ranjbar, M. Evaluation of asphaltene adsorption on minerals of dolomite and sandstone formations in two and three-phase systems. Advances in Geo-Energy Research, 2021, 5(1), 39-52, doi: 10.46690/ager.2021.01.05

Optimum acid selection based on reservoir condition is one of the key elements in achieving a successful treatment in carbonate matrix acidizing. High reaction and corrosion rate of regular hydrochloric acid especially in tight reservoirs with high temperatures is considered as a limitation of this acid. One alternative in a high-temperature reservoir is to use in-situ generated hydrochloric. The objective of this study is to simulate acidizing treatment using both regular hydrochloric and in-situ generated hydrochloric acid. A continuum two-scale model for linear and radial flow geometry was used to simulate dissolution pattern. A finite-volume method with an implicit backward Euler scheme was used to solve the governing equations. The results of the simulation in a linear system showed that, due to low face dissolution, the in-situ generated hydrochloric at low injection rates could create longer wormholes with less pore volume to breakthrough. The results also proved that using the in-situ generated hydrochloric acid could lead to less face dissolution and deeper penetration of acid into the reservoir. This acidizing system is very suitable in situations where a low injection rate is needed and regular hydrochloric cannot be used due to higher pore volume to breakthrough and high corrosion rate. Cited as : Kiani, S., Jafari, S., Apourvari, S. N., Mehrjoo, H. Simulation study of wormhole formation and propagation during matrix acidizing of carbonate reservoirs using a novel in-situ generated hydrochloric acid. Advances in Geo-Energy Research, 2021, 5(1): 64-74, doi: 10.46690/ager.2021.01.07

Fluid loss during cementing operation in depleted reservoirs or in deep wells of reservoirs with low breakdown pressure is a major concern for maintaining well integrity. To overcome this problem, the weight of cement slurry is usually reduced. Although various slurry formulations have been proposed during the last decade, the cost and availability of required additives is still an important concern, especially when the oil price is low. The objective of this study is to make lightweight cement slurry with a density of 105 lb/ft 3 , using the combination of natural pozzolan and API class G cement. In this study, a new formulation based on the optimum amount of a natural pozzolan and other additives is proposed. Based on the results of 24-hour compressive strength test and free water volume, 30% replacement of cement powder with pozzolan was selected as an optimal amount. Addition of more pozzolan into the slurry reduces its pumpability even at room temperature. Bottom-hole condition was simulated by increasing the temperature to 150°F and chemical additives were used to maintain the rheological properties of this slurry. Fluid loss control agent, dispersant and retarder were used at optimum values 0.5, 0.08 and 0.05 (%bwoc), respectively. The compressive strength of the cement rock was monitored at 3, 7 and 30 days, reaching 3528 psi after 30 days. Cited as : Larki, O., Norouzi Apourvari, S., Schaffifie, M., Farazmand, R. A new formulation for lightweight oil well cement slurry using a natural pozzolan. Advances in Geo-Energy Research, 2019, 3(3): 242-249, doi: 10.26804/ager.2019.03.02