Search

The study focuses on the flow of hybrid nanofluid, induced by magnetic and radiation effects, across an exponentially stretched sheet. The research examines the impact of temperature-dependent properties of the hybrid nanofluid on the sheet. Water is used as the base fluid, and SWCNT and MWCNT are employed as nanoparticles. The study includes a discussion of the Yamada–Ota, Xue and Tiwari–Das models of hybrid nanofluids. The governing system of flow is presented mathematically, and boundary layer approximations are used to reduce differential equations. The differential equations are transformed into dimensionless ordinary differential equations (ODEs) by using transformations. The dimensionless system of equations is then solved numerically. The results of the flow model are offered in tabular and graphical forms. We observed that Tiwari–Das model of hybrid nanofluid achieved more heat transfer and friction factor values when compared to other models of Xue and Yamada–Ota models of hybrid nanofluid. Temperature curves are noted to be enhanced by enlargement in the nano-concentration factor. If the nano-concentration increased in the fluid which boosted the thermal conductivity of the liquid, then as a result, the temperature of fluid enhanced at surface. [ABSTRACT FROM AUTHOR]

This work is focused on Magneto hydrodynamic unsteady flow of Newtonian fluid flow over a perpendicular porous plate along with chemical reaction, heat, and mass transfer. The induced magnetic field and viscous and magnetic dissipation properties are considered throughout the porous plate. Heat source is the added effect in the model to observe the nature of flow in this work. This study finds its applications in understanding the storage of flues, disposal of radioactive waste materials, flow in water purifies, etc. The nonlinear behavior of the governing equation motivates us to use a finite difference approach for solving equations. The major resolution of this research is to work on how the physical elements affect velocity, temperature, concentration, and magnetic field. Fascinating facts are noticed as the unsteady fluid velocity rises with the heat source parameter because as the heat of a material increases, the movement of the fluid particle will be fast. Due to the presence of a magnetic field high thermal radiation is observed at high temperature and concentration. As the magnetic parameter and magnetic field are inversely proportional according to an induced magnetic field, it is noticed that their magnetic field declines for higher values of magnetic Prandtl number & magnetic parameter. This work has dynamic prominence in the field of medicine and engineering, which develops interest among young researchers. [ABSTRACT FROM AUTHOR]

An analysis is presented for the stagnation-point two-dimensional fluid flow of hybrid nanofluid towards an expanding surface characterized by the induced magnetic field. Further, the consideration of thermal buoyancy and additional heat source enhances the flow phenomena with various physical parameters involved in it. This work has significant novelty due to the behavior of the convective boundary conditions. Besides, due to the convective term the nonlinear differential equations designed in this problem are incorporated and are resolved numerically by executing the Runge–Kutta–Fehlberg method. Additionally, three different classes of nanosized particle configurations named brick, cylinders, and platelets shapes are examined for the implementation of the Hamilton–Crosser thermal conductivity model. In the end, the influences characterizing the local Nusselt number and the coefficient of skin friction profiles have been discussed for unalike shapes of nanosized particles are discussed. In the above study, it is found that the platelet-shaped nanosized particle is more efficient in comparison to the other shapes considered herein. Further, particle concentration and particle shape are also favorable in enhancing fluid temperature in hybrid nanofluids in contrast to pure fluid. [ABSTRACT FROM AUTHOR]

Steady flow of incompressible Maxwell–Sutterby fluid at stretching sheet is discussed in the presence of stagnation point region. The magnetic Reynolds number is considered very high and induced magnetic and electric fields are applied to the fluid flow. Temperature-dependent properties with radiation influence are considered in this analysis. The heat source or sink and melting impact are also debated in this analysis. A differential model of mathematics is developed by employing a governing constitutive equation. The differential equations' model is condensed and becomes ordinary differential equations by implementing the appropriate transformations. Furthermore, these equations are elucidated by the numerical scheme. The physical influence of physical parameters is exhibited in the graphs and tabular form. The escalating values of M cause a shear thinning attitude in the fluid; as a result, devaluation in the velocity is detected in the case of a / c = 0. 5 , while it depicted the counter behavior for a / c = 1. 5. The skin friction is heightened with improving values of Re because R e boosted which improved the viscosity of liquid as well as heightened the friction at sheet. The enhancing values of M p cause a decrement in skin friction. The melting parameter is enriched which reduces the viscosity of fluid due to temperature boosting as well as friction reduction. The diminution in skin friction is found for enhancing the values of β. [ABSTRACT FROM AUTHOR]

This research offers an analysis of the mixed convective transient boundary film Casson fluid stream and thermal distribution through a vertical sheet. Viscous dissipation and the Soret effect are introduced to support the flow in stimulating heat capacity. Unlike typical investigations, the present flow-formulated model is done to capture an induced magnetic field. The Boussinesq approximation is used to describe the nonlinear formulated partial derivatives governing the heat transfer fluid that is non-dimensionalized using suitable dimensionless quantities. The transformed partial derivative model is numerically solved via the spectral Chebyshev technique and the results of shear stress, current density, Nusselt number, and mass gradient are tabulated. The role of numerous terms on dimensionless flow rate, induced velocity, and heat transfer with species distribution is discussed in a very effective way. Velocity and temperature of liquid decline as boosting the material parameter. Enhancing values G r , G r m favor the flow momentum and oppose the temperature profile. [ABSTRACT FROM AUTHOR]

The physiological system loses heat energy through the bloodstream to nearby cells. Such energy loss can lead to a quick death, anemia, severe hypothermia and high or low blood pressure to heart surgery. As a result, biomedical engineers and physicians are increasingly attracted to the study of entropy production to calculate the energy loss of biological systems. Furthermore, the thermodynamic state of entropy production is used to access cancer cells during chemotherapy treatment and heat transfer in tissues. The current model intends to explore the significance of the non-Fourier heat flux model on Eyring–Powell/Maxwell hybrid nanofluid (Fe3O4–CuO/blood) flow in a linear extending sheet with induced magnetic field and entropy generation. Suitable self-similarity variables are performed to convert momentum and thermal equations determined using the homotopy perturbation method into ordinary differential equations. The significance of distinct physical parameters such as thermal relaxation parameter, volume fraction, fluid parameter, magnetic Prandtl number, Biot number, Brinkman number, heat source, Eckert number, radiation and heat source on velocity, temperature, skin friction coefficient, Nusselt number, entropy production, streamlines and isotherm are represented through figures. It is recognized that the fluid friction irreversibility is comparatively higher than thermal irreversibility and highly dominates the total entropy generation. The nanoparticle volume fraction diminishes the velocity and induced magnetic field of both Eyring–Powell and Maxwell hybrid nanofluid. Fluid friction irreversibility is more in Maxwell fluid compared to the Eyring–Powell fluid. [ABSTRACT FROM AUTHOR]

The study of nanoliquid characteristics and their heat performance have attracted the interest of engineers. These engineered fluids have high thermal conductivity due to which such liquids are reliable for different engineering applications including heating/cooling of buildings, thermal and mechanical engineering, etc. Therefore, the current research design provides a new ternary nanoliquid model for the heat transport process under induced magnetic field effects, mixed convection, heating source and thermal radiations. The modeling has been done by implementing the ternary fluid characteristics and supportive transformations and then for results simulation; bvp4c is coded successfully. It is scrutinized that a higher inductive magnetic field (0.1–0.4) and nanoparticles amount (0.01–0.07) are better to resist the movement while the wedge parameter (λ1) promotes it. By promoting the heating source, Eckert and Rd, the heat transfer process is observed rapidly while the mixed convective number α controls it. Further, the particular used ternary nanoliquid is examined and found to be good for cooling purposes. [ABSTRACT FROM AUTHOR]

This paper focuses on the effects of heat radiation and chemical reactions on naturally occurring convective MHD flow that conducts electricity when there is an induced magnetic field present between two vertical walls having a porous medium between them. An analytical method is adopted to investigate the impacts of all pertinent parameters concerning the presented multi-physics problem. With the aid of relevant conversions, the nonlinear PDEs are remodeled into nonlinear ODEs.The effects of radiation parameters, Hartmann number, Hall current, chemical reaction and porosity parameters are scrutinized on velocity components, induced magnetic field, and current density. The results predict that the temperature profile decreases as the radiation factor rises, whereas the induced magnetic field would exhibit the opposite pattern. The profiles of component velocity get more intense for high rates of the porosity parameter. Additionally, profiles of induced magnetic field surges with elevated chemical reaction parameter values have been noted. The presented approach is very promising for multi-physics phenomena like chemical reactors and solar thermal devices. [ABSTRACT FROM AUTHOR]

There are various implementations of common fluids in industrial and chemical processes. With the cooperation of the nanoparticles, the lower thermal properties of such fluids can be augmented. By using a new kind of nanofluid namely hybrid nanofluid, the heat transfer rate of such fluids can be boosted more quickly. The main intention of this research is on entropy analysis in the stagnant point flow of a hybrid nanofluid. The mixed convection nonlinear thermal radiative flow on a stretchable vertical sheet is examined under the influences of the induced magnetic field and chemical reactions. The impacts of Joule heating, partial slips and viscous dissipation are also involved. After the execution of the appropriate similarity transformations, the constituting equations of the flow problem emerge as the nonlinear dimensionless setup of ordinary differential equations. An amplification is examined in the velocity field, entropy generation, and induced magnetic field relative to the mixed convection parameter. With the improved Brinkman number, an augmentation is developed in the entropy of the system. Moreover, both the heat transfer rate and the surface drag force exhibit an accelerating behavior relative to the mixed convection parameter. [ABSTRACT FROM AUTHOR]

The aim of this paper is to study the combined effects of induced magnetic field and chemical reaction on MHD nonlinear mixed convective flow of Casson fluid over an inclined vertical porous plate embedded in a porous medium. The influence of viscous dissipation, heat source/ sink, and slip phenomena is taken into consideration. The effect of thermal radiation is also considered in the energy equation. The Casson fluid model is used to characterize the non-Newtonian fluid behavior. The main objective here is to analyze the induced magnetic field in a nonlinear mixed convective flow. At first, the appropriate similarity transformation is used to transform the governing nonlinear coupled partial differential equations into nonlinear coupled ordinary differential equations. The nonlinear ordinary differential equations are solved by a shooting technique with the help of bvp4c Matlab package. For the validation of the obtained results through the bvp4c Matlab solver, we have also solved this problem via R-K fourth-order method in Matlab and a good agreement is noted in both the results. The results of different physical parameters involved in the problem on the velocity, temperature, induced magnetic field and concentration are discussed by using graphs. It is noticed that the increasing values of the inclination angle cause rising of the induced magnetic field while induced magnetic field has opposite nature with magnetic parameter and magnetic Prandtl number. With increasing values of the thermal radiation parameter, the temperature profile diminishes. Apart from this, the numerical values of skin friction coefficient, Nusselt number and Sherwood number for the various values of parameters are displayed in tabular form. [ABSTRACT FROM AUTHOR]

A nonlinear micropolar fluid model is considered with a view to examine the effect of induced magnetic field on blood flow through a constricted channel. We assume that the flow is unidirectional and flowing through a narrow channel, where the Reynolds number is less than unity such as in microvessels. Under the low Reynolds number approximation, the analytical expressions for axial velocity, micro-rotation component, axial pressure gradient, axial induced magnetic field, resistance to flow and wall shear stress have been obtained. The flow characteristic phenomena have been analyzed by taking valid numerical values of the parameters, which are applicable to blood rheology. The present analytical solutions have been compared with the analytical solutions of Hartmann (Hartmann J. Hg-Dynamics-I: Theory of the laminar flow of an electrically conductive liquid in a homogeneous magnetic field, Mathematisk-Fysiske Meddeleser XV:6, 1937) and found excellent agreement. The study shows that with the increasing values of the magnetic field strength decreases the axial velocity at the central line of the channel, while the flow is accelerating in the vicinity of the channel wall. The induced magnetic field has an increasing effect on the micro-rotation component, which in turn produces increasing pressure gradient. The electrical response of the microcirculation increases with the increase in the Hartmann number and the stenosis height. Thus, the resultant flow predictions presented here may be useful for the potential applications in cardiovascular engineering. [ABSTRACT FROM AUTHOR]

The Adomian decomposition method (ADM) is applied to analyze Newtonian bio-magneto-tribological squeeze film flow with magnetic induction effects incorporated. Robust solutions are developed for the transformed radial and tangential momentum and radial and tangential induced magnetic field conservation equations. The effects of squeeze Reynolds number (N1 = m/ where Bt = Batchelor number), dimensionless axial magnetic force strength parameter (N2), dimensionless tangential magnetic force strength parameter (N3), magnetic Reynolds number (m) are depicted graphically. ADM is observed to demonstrate excellent convergence, stability and versatility in simulating both magnetic squeeze film problems. Numerical verification is achieved with Nakamura's tridiagonal finite difference method (NTM). The simulations are relevant to "smart" biological bearings and prosthetics (e.g., "smart knees") exploiting magnetic fluids. [ABSTRACT FROM AUTHOR]

In this attempt, simultaneous effects of slip condition and an induced magnetic field on the peristaltic flow of viscous fluid in an asymmetric channel is investigated. The whole analysis have been carried out in the presence of heat and mass transfer characteristics. The resulting mathematical model is solved by exploiting the boundary conditions derived from physical point of view. The expressions of the desired flow quantities of interest are derived and discussed. A comparison with no-slip condition is shown. [ABSTRACT FROM AUTHOR]

The purpose of this study is to discuss the influence of induced magnetic field on the peristaltic flow of an incompressible third-grade fluid in a curved channel. The problem formulation is presented in a wave frame of reference. The continuity, linear momentum, and induction equations lead to the mathematical development. The relations of stream function, pressure gradient, magnetic force function, induced magnetic field, and current density are developed. The effects of embedded parameters are explained by plots. [ABSTRACT FROM AUTHOR]