Search

This work presents a thermoelectric vibration and buckling behavior of a bidirectional functionally graded piezoelectric porous (BD-FGPP) plate resting on the elastic foundation with arbitrary boundary conditions. The variation of the material properties in the FGPP plate is bidirectional, i.e. along longitudinal and thickness directions, using the modified power law distributions. Also, the BD-FGPP plate carries various porosity distributions, i.e. even, uneven and symmetric center types. The governing equation of the FGPP plate has been obtained through Hamilton's principle and solved through a higher-order finite element approach. The correctness and usefulness of the current technique are confirmed and compared with existing model outcomes available in the literature. A comprehensive parametric study has investigated the effect of the elastic foundations, porous exponent with various porosity distributions, bidirectional material exponent, temperature change, electrical loading and boundary conditions. The attained results are more valuable for designing functionally graded piezoelectric-based smart structures by considering the porosity distribution in a thermoelectric environment. [ABSTRACT FROM AUTHOR]

This study explored the disparities in bending, buckling, and vibration results of ideal and non-ideal functionally graded graphene nanoplatelet reinforced composite (FG-GPLRC) beams. The smooth and continuous profiles of material distributions of ideal FG-GPLRC beams were modified for making the controlling tracks to produce two different forms of non-ideal FG-GPLRC beams which had in-and out-stepwise distributions of material constituents across the beam's thickness. The Halpin–Tsai model and the rule of mixture were used to predict the effective material properties of the nanocomposite beams. The closed-form solution possessing less time of computation was provided for predicting the mechanical behavior of the beams, and it was validated for accuracy by comparing with the results of the Ritz method. The study's results suggest that non-ideal beams with an out-stepwise distribution of material constituents have a better dispersion of reinforcing nanomaterials than in-stepwise distribution. Therefore, the results of the beams with an out-stepwise distribution are closer to those of ideal beams than with in-stepwise distribution. [ABSTRACT FROM AUTHOR]

Perforated composite laminates are frequently encountered in multiple engineering applications as sub-components of complicated structures. In many of these applications, the primary objective of using the panel is to resist buckling under diverse environmental and loading conditions. This paper is mainly focused on the vibration and buckling responses of composite laminates with elliptical cutouts subjected to localized edge loads under different hygrothermal environments. Toward this, a nine-noded heterosis plate element has been utilized to discretize the plate by adopting a refined meshing pattern around the elliptical cutout. The geometric nonlinearity has been incorporated to predict free vibrations under the hygrothermal environment. Considering the plethora of applications of composite laminates in hygrothermal conditions, a new temperature/moisture-dependent model is presented by taking into consideration various mechanical loadings. For a given environmental and loading condition, the stress distribution within the perforated panel is highly non-uniform in nature and hence, a novel dynamic approach has been proposed to solve buckling problems by adopting two sets of boundary conditions. A MATLAB program has been developed to investigate the effect of various parameters such as elliptical cutout size, elliptical orientation, elliptical cutout eccentricity, thickness and boundary conditions of the laminated composite plate under diverse hygrothermomechanical loading conditions. A notable difference in the critical buckling load is observed when the locally prestressed perforated panels are subjected to complex hygrothermal environments, especially at larger elliptical cutouts and hence the importance of localized edge loads under hygrothermal environment is emphasized. [ABSTRACT FROM AUTHOR]

In the present study, free vibration and buckling characteristics of a sandwich functionally graded material (FGM) plate resting on the Pasternak elastic foundation have been investigated. The formulation is based on non-polynomial higher-order shear deformation theory with inverse hyperbolic shape function. A new modified sigmoid law is presented to compute the effective material properties of sandwich FGM plate. The governing equilibrium equations have been derived using Hamilton's principle. Non-dimensional frequencies and critical buckling loads are evaluated by considering different boundary conditions based on admissible functions satisfying the desired primary and secondary variables. Comprehensive parametric studies have been performed to analyze the influence of geometric configuration, volume fraction exponent, elastic medium parameter, and non-dimensional load parameter on the non-dimensional frequency and critical buckling load. These parametric studies have been done for various boundary conditions and different configurations of the sandwich plate. The computed results can be used as a benchmark for future comparison of sandwich S-FGM plates. [ABSTRACT FROM AUTHOR]

In this paper, the Ritz-based solutions are developed for the bending, buckling and vibration behaviors of laminated composite beams with arbitrary lay-ups. A quasi-3D theory, which accounts for a higher-order variation of both the axial and transverse displacements, is used to capture the effects of both shear and normal deformations on the behaviors of composite beams. Numerical results for various boundary conditions are presented and compared with existing ones available in the literature. Besides, the effects of fiber angle, span-to-height ratio, material anisotropy and Poisson's ratio on the displacements, stresses, natural frequencies and buckling loads of the composite beams are investigated. [ABSTRACT FROM AUTHOR]

We present a computational study that develops isogeometric analysis based on higher-order smooth NURBS basis functions for the analysis of in-plane laminated composites. Focusing on the stress, vibration and stability analysis of angle-ply and cross-ply 2D structures, we compare the convergence of the strain energy error and selected stress components, eigen-frequencies and buckling loads according to overkill solutions. Our results clearly demonstrate that for in-plane laminated composite structures, isogeometric analysis is able to provide the same accuracy at a significantly reduced number of degrees of freedom with respect to standard finite elements. In particular, we observe that the smoothness of spline basis functions enables high-quality stress solutions, which are superior to the ones obtained with conventional finite elements. [ABSTRACT FROM AUTHOR]

Quasi-three-dimensional (3D) stability and free vibration analyses of bi-axially loaded, simply-supported, sandwich piezoelectric plates with an embedded either a functionally graded (FG) carbon nanotube-reinforced composite (CNTRC) core or a multilayered fiber-reinforced composite (FRC) one are presented. Three different distributions of carbon nanotubes (CNTs) through the thickness of the CNTRC core, i.e. uniformly distributed and FG V-, rhombus- and X-type variations, are considered, and the effective material properties of the CNTRC core are estimated using the rule of mixtures. The Pagano method, which is conventionally used for the analysis of multilayered FRC plates, is modified to be feasible for the study of sandwich hybrid CNTRC and piezoelectric ones, in which Reissner mixed variational theorem, the successive approximation and transfer matrix methods, and the transformed real-valued solutions of the system equations are used. The modified Pagano solutions for the stability and free vibration of multilayered hybrid FRC and piezoelectric plates are in excellent agreement with the exact 3D ones available in the literature, and those for sandwich hybrid CNTRC and piezoelectric plates may be used as the benchmark solutions to assess the ones obtained by using various 2D theories and numerical models. [ABSTRACT FROM AUTHOR]

This paper presents the Hencky bar-chain model (HBM) for buckling and vibration analyses of Euler-Bernoulli beams with elastic end restraints. The Hencky bar-chain comprises rigid beam segments (of length a = L/n where L is the total length of beam and n the number of beam segments) connected by frictionless hinges with elastic rotational springs of stiffness EI/a where EI is the flexural rigidity of the beam. The elasticity and the mass of the beam are concentrated at the hinges with rotational springs. The key contribution of this paper lies in the modeling of the elastic end restraints of the Hencky bar-chain that will simulate the same buckling and vibration results as that furnished by the first-order central finite difference beam model (FDM) which was earlier shown to be analogous to the HBM. The establishment of such a physical discrete beam model allows one to obtain solutions for beam-like structure with repetitive cells (or elements) as well as to calibrate the Eringen's coefficient e0 in the nonlocal beam theory that captures the small length scale effect. [ABSTRACT FROM AUTHOR]

Cracks in structural members lead to local changes in their stiffness and consequently their static, dynamic and stability behavior is altered. The influence of cracks on dynamic characteristics like free vibration, buckling and parametric resonance characteristics of a cracked beam with a transverse crack using finite element method (FEM) is investigated in the present work. Modal testing of beams with transverse open crack is conducted using FFT analyzer to verify the frequencies of vibration of beams. The crack is assumed to be open type and the analysis is linear based on small deformation theory neglecting damping. The loading on the beam is considered as axial with a simple harmonic fluctuation with respect to time. A two-noded Timoshenko beam element with provision of crack is used in this study. The equation of motion represents a system of second-order differential equations with periodic coefficients of the Mathieu-Hill type. The development of the regions of instability arises from Floquet's theory and the periodic solution is obtained by Bolotin's approach using FEM. It is observed that the frequencies of vibration and buckling load of the beam are influenced significantly by location and depth of cracks. It is observed that, for a given location of crack, the onset of instability occurs earlier with increase in depth of crack. As the location of crack moves from the fixed end to the free end the excitation frequency increases. The instability occurs later and the width of the instability regions reduces. When the damage is near to the free end, the instability region almost coincides with the instability region for the undamaged beam. This means that the damage near the fixed end is more severe on the dynamic instability behavior than that of the crack located at other positions. The vibration and instability results can be used as a technique for structural health monitoring or testing of structural integrity, performance and safety. [ABSTRACT FROM AUTHOR]

In this paper, we analyze the transverse vibration of a circular plate loaded by uniform pressure along its edge. The plate is supported by an elastic ring support being coaxial with the plate. At its edge the plate is clamped but the radial displacement is allowed. Apart from this problem, the heated plate clamped at its edge, but without the possibility of radial displacement, is also analyzed. The analytical solution of governing equation is obtained in the form of Bessel's functions. Using the analytical solution, the frequencies of transverse vibrations depending on loads, elastic ring stiffness and the location of ring are obtained. The results show that the lowest frequencies vibrations can be either symmetric or asymmetric having one or two nodal diameters. It is also shown that multiple vibration frequencies can occur for special values of load and ring stiffness. [ABSTRACT FROM AUTHOR]

A theoretical analysis is presented for determining the free vibrational and buckling characteristics of the nonhomogeneous, orthotropic, thin-walled, circular cylindrical and conical shells under a hydrostatic pressure and resting on a two-parameter elastic foundation. The basic relations have been obtained for the orthotropic truncated conical shell, the Young's moduli and density of which vary continuously in the thickness direction. By applying the Galerkin method, the buckling hydrostatic pressure and dimensionless frequency parameter of the homogeneous and non-homogeneous orthotropic truncated conical shells with or without elastic foundations are obtained. Finally, the effects of the Winkler and Pasternak-type elastic foundations, the variations of shell characteristics, the effects of the nonhomogeneity and orthotropy on the critical parameters have been studied. The results are presented in tables, figures and compared with other works. [ABSTRACT FROM AUTHOR]

Sandwich panels have been developed to either produce lighter structures capable of carrying prescribed loads or increase the load-carrying capacity subject to limitations on weight. In these panels, facings carry bending and in-plane loads while the core functions similarly to the web of a beam, mostly resisting transverse shear. Improvements in the load-carrying capacity of sandwich panels can be achieved through modifications in their geometry, boundary conditions, and material distribution. One of the methods recently considered by the authors is based on using facings with a step-wise variable thickness that increases at the critical region of the structure.1 It was illustrated that the strength of a sandwich panel can be considerably enhanced using such stepped facings, without a detrimental increase of the weight. The present paper expands the study of the feasibility of the stepped-facing sandwich panel concept concentrating on three structural problems, i.e. a possible improvement in stability, changes in the natural frequencies, and forced dynamic response to the explosive blast. It is illustrated that the stepped-facing design can improve stability of the panel and its response to blast loading. However, fundamental frequencies of stepped-facing panels decrease compared to those in their conventional equal-weight counterparts. Such decrease is detrimental in the majority of engineering applications representing a limitation of stepped-facing panels. Nevertheless, the usefulness of the stepped-facing design is proven in the problems of bending, stability, and blast loading. Numerous examples presented in the paper validate our suggestion that the combination of a relatively simple manufacturing process and an improved structural response of sandwich panels with stepped facings may present the designer with an attractive alternative to conventional sandwich structures. [ABSTRACT FROM AUTHOR]

It is well-known that stress singularities occur at the obtuse corners of skew plates, especially when the skew angles are large. Owing to the stress singularities, accurate bending results, vibration frequencies and buckling loads of highly skewed plates are difficult to obtain accurately. In this paper, the mesh-free least squares-based finite difference (LSFD) method is proposed for solving the free vibration and buckling problems of highly skewed plates. As such vibration and buckling results are scarce in the open literature, the method was verified by comparing the LSFD solutions with existing ones having a skew angle θ ≤ 70°, or by carrying out convergence studies. The vibration and buckling results for plates with very large skew angle (θ = 80°) are presented for the first time. The close agreement observed in the comparison studies and the good convergence behavior of the LSFD solutions provide the confidence that these vibration and buckling results predicted by the LSFD method are of good accuracy. [ABSTRACT FROM AUTHOR]

This paper presents the discrete singular convolution (DSC) method for solving buckling and vibration problems of rectangular plates with all edges transversely supported and restrained by uniform elastic rotational springs. The opposite plate edges are subjected to a linearly varying uni-axial in-plane loading. The rationale for using DSC method stems from its numerical stability and flexible implementation for structural analysis. To verify the present approach, convergence and comparison studies for rectangular plates with different combinations of elastically restrained and classical edges are carried out. Accurate buckling and vibration solutions of plates having two opposite edges elastically restrained and the other two sides clamped, or all edges elastically restrained are presented. [ABSTRACT FROM AUTHOR]

Developed herein are the scaling laws for physical modeling of anti-symmetric cross-ply laminated circular cylindrical shells for buckling and free vibration experiments. In the absence of experimental data, the validity of the scaling laws is verified by numerical experiments. This is accomplished by calculating theoretically the buckling loads and fundamental frequencies of the model and substituting into the scaling laws to obtain the corresponding values of the prototype. The predicted values of the prototype from the scaling laws are then compared with existing closed-form solutions. Examples for the complete similitude cases with various stacking sequences, number of plies, and length-to-radius ratios show exact agreement. The derived relationships between the model and prototype will greatly facilitate and reduce the need for costly experiments. In reality, either due to the complexity of the scaling laws or to economize experimental cost and time, it may not be feasible to construct the model to fulfil the scaling laws completely. Thus, several possible models of partial similitude are investigated numerically. These include models with distortion in laminated material properties, stacking sequences and number of plies. Model with distortion in material properties yields a high percentage of discrepancy and is not recommended. [ABSTRACT FROM AUTHOR]

The present paper is concerned with the vibration, buckling and dynamic instability behavior of laminated composite, cross-ply, doubly-curved panels with a central circular hole subjected to in-plane static and periodic compressive loads. A generalized shear deformable Sanders' theory is used to model the curved panels, considering the effects of transverse shear deformation and rotary inertia. Bolotin's approach is used for studying the dynamic instability regions of doubly-curved panels. The effects of non-uniform edge loads, curvature with different cutout ratios, static and dynamic load factors, and lamination parameters on curved panels are investigated with the results discussed. [ABSTRACT FROM AUTHOR]

The similitude invariants and scaling laws for the buckling and free vibration of antisymmetric angle-ply laminated circular cylindrical shells were derived by directly applying the similitude transformation to the governing differential equations of the problem considered. The scaling laws relate the buckling load and natural frequency of a model to those of a prototype when the similarity requirements between the two systems are fulfilled. In the absence of experimental data, the validity of the scaling laws was verified by calculating theoretically the buckling loads and fundamental frequencies of vibration of the model and substituting them into the scaling laws to yield values for the prototype, which were then compared with those directly computed for the prototype. The numerical studies show that for the case of complete similitude with various stacking sequence, number of plies, and radius ratio, the solutions predicted by the similitude theory agree exactly with those obtained directly from the theory. Some typical partial similitude cases were also investigated. It was demonstrated that the partial similitude model with distortion in stacking sequence is reliable for predicting the behavior of the prototype. On the other hand, models with distortion in material properties are not recommended because of the existence of large discrepancies in the predicted results. [ABSTRACT FROM AUTHOR]