Search

Natural single-chain nanoparticles (SCNPs) such as proteins have inspired research into the formation and application of synthetic SCNPs. Although the latter can mimic general aspects of the self-assembly behavior of their biological counterparts, these systems remain relatively understudied. In this respect, a systematic series of amphiphilic statistical copolymers (ASC) of different molecular weights, with a hydrophilic comonomer (methacrylic acid) and varying hydrophobic comonomer to encompass methacrylates of different hydrophobicity, are synthesized. Small-angle X-ray scattering studies confirmed that SCNPs are achieved for each copolymer series when dispersed in basified water at 1% w/w. When the aggregation number of the ASC nanoparticles is close to unity the particle shape elongates resulting in a larger particle surface area to volume ratio, allowing more hydrophilic groups to locate on the particle surface tending to keep the particle surface charge density (PSC) constant. Thus, within a series, particle elongation increases with copolymer molecular weight. Structural parameters of SCNPs formed by ASCs composed of hydrophobic components with low partition coefficients are well consistent with predictions obtained from the PSC model. These results highlight the main parameters, namely molecular weight and acid content, responsible for the SCNP formation and provide insight into how specific particle morphology can be targeted., (© 2024 The Author(s). Macromolecular Rapid Communications published by Wiley‐VCH GmbH.)

Hydrophilic chitosan (CHT) and hydrophobic polyε-caprolactone (PCL) are well-known biocompatible and biodegradable polymers that have many applications in the biomedical and pharmaceutical fields. But the mixtures of these two compounds are considered incompatible, which makes them not very interesting. To avoid this problem and to further extend the properties of these homopolymers, the synthesis of a new graft copolymer, the fully biodegradable amphiphilic poly(ε-caprolactone-g-chitosan) (PCL-g-CHT) is described, with an unusual "reverse" structure formed by a PCL backbone with CHT grafts, unlike the "classic" CHT-g-PCL structure with a CHT main chain and PCL grafts. This copolymer is prepared via a copper-catalyzed 1,3-dipolar Huisgen cycloaddition between propargylated PCL (PCL-yne) and a new azido-chitosan (CHT-N 3 ). In order to obtain an amphiphilic copolymer regardless of the pH, chitosan oligomers, soluble at any pH, are prepared and used. The amphiphilic PCL-g-CHT copolymer spontaneously self-assembles in water into nanomicelles that may incorporate hydrophobic drugs to give novel drug delivery systems., (© 2023 Wiley-VCH GmbH.)

In this work, amphiphilic polymers synthesized from carboxylated carbon nanotubes stabilized high internal phase emulsions are demonstrated to be capable of direct extracting zearalenone and zearalanone in samples consisting of an oil-water emulsion system. Under optimal conditions, the maximum adsorption capacities for zearalenone and zearalanone are 17.27 and 13.26 mg/g. The adsorption is mainly attributed to π-π interaction, hydrophobic interaction, and hydrogen-bonding interaction for zearalenone and zearalanone. The adsorption isotherms reveal that the adsorption of zearalenone and zearalanone on amphiphilic polymers synthesized from carboxylated carbon nanotubes stabilized high internal phase emulsions follows Freundlich model with multilayer and heterogeneous adsorption due to the presence of multiple kinds of adsorption sites. The relative recoveries of the spiked zearalenone and zearalanone in corn juice samples range from 85% to 93% with relative standard deviations lower than 3.52%. The results manifest the high efficiency of amphiphilic polymers synthesized from carboxylated carbon nanotubes stabilized high internal phase emulsions for the adsorption and separation of analytes in the oil-water emulsion system. This study provides a new perspective on adsorbent engineering for the adsorption application in heterogeneous media., (© 2023 Wiley-VCH GmbH.)

Low-molecular weight (MW) amphiphilic copolymers have been recently introduced as a powerful tool for the detergent-free isolation of cell membrane proteins. Herein, a screening approach is used to identify a new copolymer type for this application. Via a two-step ATRP/acidolysis procedure, a 3 × 3 matrix of well-defined poly[(butyl methacrylate)-co-(methacrylic acid)] copolymers (denoted BMAA) differing in their MW and ratio of hydrophobic (BMA) and hydrophilic (MAA) units is prepared. Subsequently, using the biologically relevant model (T-cell line Jurkat), two compositions of BMAA copolymers are identified that solubilize cell membranes to an extent comparable to the industry standard, styrene-maleic acid copolymer (SMA), while avoiding the potentially problematic phenyl groups. Surprisingly, while only the lowest-MW variant of the BMA/MAA 2:1 composition is effective, all the copolymers of the BMA/MAA 1:1 composition are found to solubilize the model membranes, including the high-MW variant (MW of 14 000). Importantly, the density gradient ultracentrifugation/sodium dodecyl sulfate-polyacrylamide gel electrophoresis/Western blotting experiments reveal that the BMA/MAA 1:1 copolymers disintegrate the Jurkat membranes differently than SMA, as demonstrated by the different distribution patterns of two tested membrane protein markers. This makes the BMAA copolymers a useful tool for studies on membrane microdomains differing in their composition and resistance to membrane-disintegrating polymers., (© 2022 Wiley-VCH GmbH.)

The utilization of enzymes for catalysis in organic solvents, while exhibiting selectivity to different substrates, is a big challenge. We report an amphiphilic random copolymer system that self-assembles with enzymes in an organic solvent to form nanoreactors. These encapsulated enzymes are not denatured and they do preserve the catalytic activity. The cross-linkable functional groups in the hydrophobic compartments of the polymers offer to control accessibility to the enzyme. This varied accessibility due to the polymer host, rather than the enzyme itself, endows the nanoreactor with an unnatural selectivity. The findings here highlight the significant potential of simple polymer-based enzyme nanoreactors to execute selective organic reactions under non-native conditions., (© 2021 Wiley-VCH GmbH.)

Biobased amphiphilic diblock copolymers are prepared thanks to the combination of reversible addition-fragmentation transfer (RAFT) polymerization and polymerization-induced self-assembly (PISA) in an eco-friendly solvent mixture. First, the formation of a poly(acrylic acid) macroRAFT agent (PAA-TTC) is performed in water at 70 °C. Then, in a series of experiments, the PAA-TTC macroRAFT agent is used directly, without purification, as both chain transfer agent and stabilizing agent in the RAFT-PISA of menthyl acrylate (MnA) in dispersion in an ethanol/water mixture. The polymerizations of MnA are fast with high final conversions and well-controlled amphiphilic diblock copolymers are synthesized. Stable, sub-micrometric spherical particles composed of the diblock copolymers are formed. The influence of the monomer concentration and the length of the solvophobic block on the diameter of the self-assemblies is studied by means of dynamic light scattering and cryogenic transmission electron-microscopy., (© 2020 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

It is reported that low concentration of amphiphilic triblock copolymers of pMeOx-b-pTHF-b-pMeOx structure (TBCPs) improves gene expression in skeletal muscle upon intramuscular co-injection with plasmid DNA. Physicochemical studies carried out to understand the involved mechanism show that a phase transition of TBCPs under their unimer state is induced when the temperature is elevated from 25 to 37 °C, the body temperature. Several lines of evidences suggest that TBCP insertion in a lipid bilayer causes enough lipid bilayer destabilization and even pore formation, a phenomenon heightened during the phase transition of TBCPs. Interestingly, this property allows DNA translocation across the lipid bilayer model. Overall, the results indicate that TBCPs exhibiting a phase transition at the body temperature is promising to favor in vivo pDNA translocation in skeletal muscle cells for gene therapy applications., (© 2020 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Poly ((ethylene oxide)-b-(propylene oxide)-b-(ethylene oxide)) triblock copolymers commonly known as poloxamers or Pluronics constitute an important class of nonionic, biocompatible surfactants. Here, a method is reported to incorporate two acid-labile acetal moieties in the backbone of poloxamers to generate acid-cleavable nonionic surfactants. Poly(propylene oxide) is functionalized by means of an acetate-protected vinyl ether to introduce acetal units. Three cleavable PEO-PPO-PEO triblock copolymers (Mn,total = 6600, 8000, 9150 g·mol(-1) ; Mn,PEO = 2200, 3600, 4750 g·mol(-1) ) have been synthesized using anionic ring-opening polymerization. The amphiphilic copolymers exhibit narrow molecular weight distributions (Ð = 1.06-1.08). Surface tension measurements reveal surface-active behavior in aqueous solution comparable to established noncleavable poloxamers. Complete hydrolysis of the labile junctions after acidic treatment is verified by size exclusion chromatography. The block copolymers have been employed as surfactants in a miniemulsion polymerization to generate polystyrene (PS) nanoparticles with mean diameters of ≈200 nm and narrow size distribution, as determined by dynamic light scattering and scanning electron microscopy. Acid-triggered precipitation facilitates removal of surfactant fragments from the nanoparticles, which simplifies purification and enables nanoparticle precipitation "on demand.", (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

To track nanocarriers, many researches adopt nanocarriers labeled with radiotracers or encapsulating near-infrared fluorescence (NIRF) dye. In this study, novel amphiphilic copolymers, methoxy poly(ethylene glycol) (mPEG)-cyanine-poly(ε-caprolactone) (PCL) (mPEG-Cy-PCL) are synthesized. mPEG-Cy-PCL are capable of performing NIRF imaging, photothermal therapy (PTT) on cancer cells and self-assembly nanocarriers. Cy-based micelles can encapsulate doxorubicin (Doxo@Cy-micelle) and achieve NIRF image-guided drug delivery. Doxo@Cy-micelles are nanosized micelles enhancing the accumulation of Doxo in tumor sites and decreasing side effects. Doxo@Cy-micelles exhibit an excellent PTT and synergistic chemotherapy of cancer via laser-triggered release of Doxo from micelles, eventually resulting in decreased cancer recurrence rates. The results show that Cy-based micelles are excellent nanocarriers for NIRF imaging and synergistic photothermal-chemotherapy of cancer., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A photo-cross-linked micelle is synthesized via photodimerization of thymine moieties fabricated from amphiphilic block copolymers (mPEG-b-P(LA-co-MPT). The crosslinking behavior is monitored by UV-Vis spectra and (1) H NMR. Dynamic light scattering (DLS) and transmission electron microscopy (TEM) showed that cross-linked micelles had smaller sizes than their uncross-linked precursors. In vitro studies reveal that cross-linking of the micelle cores results in a slow drug release and faster cellular uptake in comparison with uncross-linked ones in MCF-7 and Hela cells. Moreover, the paclitaxel (PTX)-loaded core-cross-linked micelles exhibit similar anticancer efficacy as free PTX. This work provides a convenient tool for designing a more stable structure in the blood circulation to realize a controlled drug delivery., (© 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)