Search

Flexible hydroelectric generators (HEGs) are promising self-powered devices that spontaneously derive electrical power from moisture. However, achieving the desired compatibility between a continuous operating voltage and superior current density remains a significant challenge. Herein, a textile-based van der Waals heterostructure is rationally designed between conductive 1T phase tungsten disulfide@carbonized silk (1T-WS 2 @CSilk) and carbon black@cotton (CB@Cotton) fabrics with an asymmetric distribution of oxygen-containing functional groups, which enhances the proton concentration gradients toward high-performance wearable HEGs. The vertically staggered 1T-WS 2 nanosheet arrays on the CSilk fabric provide abundant hydrophilic nanochannels for rapid carrier transport. Furthermore, the moisture-induced primary battery formed between the active aluminum (Al) electrode and the conductive textiles introduces the desired electric field to facilitate charge separation and compensate for the decreased streaming potential. These devices exhibit a power density of 21.6 µW cm -2 , an open-circuit voltage (V oc ) of 0.65 V sustained for over 10 000 s, and a current density of 0.17 mA cm -2 . This performance makes them capable of supplying power to commercial electronics and human respiratory monitoring. This study presents a promising strategy for the refined design of wearable electronics., (© 2024 Wiley‐VCH GmbH.)

Organic multilayer heterostructures with accurate spatial organization demonstrate strong light-matter interaction from excitonic responses and efficient carrier transfer across heterojunction interfaces, which are considered as promising candidates toward advanced optoelectronics. However, the precise regulation of the heterojunction surface area for finely adjusting exciton conversion and energy transfer is still formidable. Herein, organic bilayer heterostructures (OBHs) with controlled face-to-face heterojunction via a stepwise seeded growth strategy, which is favorable for efficient exciton propagation and conversion of optical interconnects are designed and synthesized. Notably, the relative position and overlap length ratio of component microwires (L DSA /L BPEA = 0.39-1.15) in OBHs are accurately regulated by modulating the crystallization time of seeded crystals, resulting into a tailored heterojunction surface area (R = L overlap /L BPEA = 37.6%-65.3%). These as-prepared OBHs present the excitation position-dependent waveguide behaviors for optical outcoupling characteristics with tunable emission colors and intensities, which are applied into two-dimensional (2D) photonic barcodes. This strategy opens a versatile avenue to purposely design OBHs with tailored heterojunctions for efficient energy transfer and exciton conversion, facilitating the application possibilities of advanced integrated optoelectronics., (© 2023 Wiley-VCH GmbH.)

Thermochromic smart windows with rational modulation in indoor temperature and brightness draw considerable interest in reducing building energy consumption, which remains a huge challenge to meet the comfortable responsive temperature and the wide transmittance modulation range from visible to near-infrared (NIR) light for their practical application. Herein, a novel thermochromic Ni(II) organometallic of [(C 2 H 5 ) 2 NH 2 ] 2 NiCl 4 for smart windows is rationally designed and synthesized via an inexpensive mechanochemistry method, which processes a low phase-transition temperature of 46.3 °C for the reversible color evolution from transparent to blue with a tunable visible transmittance from 90.5% to 72.1%. Furthermore, cesium tungsten bronze (CWO) and antimony tin oxide (ATO) with excellent NIR absorption in 750-1500 and 1500-2600 nm are introduced in the [(C 2 H 5 ) 2 NH 2 ] 2 NiCl 4 -based smart windows, realizing a broadband sunlight modulation of a 27% visible light modulation and more than 90% of NIR shielding ability. Impressively, these smart windows demonstrate stable and reversible thermochromic cycles at room temperature. Compared with the conventional windows in the field tests, these smart windows can significantly reduce the indoor temperature by 16.1 °C, which is promising for next-generation energy-saving buildings., (© 2023 Wiley-VCH GmbH.)

Organic photothermal cocrystals, integrating the advantages of intrinsic organic cocrystals and the fascinating photothermal conversion ability, hold attracted considerable interest in both basic science and practical applications, involving photoacoustic imaging, seawater desalination, and photothermal therapy, and so on. However, these organic photothermal cocrystals currently suffer individual cases discovered step by step, as well as the deep and systemic investigation in the corresponding photothermal conversion mechanisms is rarely carried out, suggesting a huge challenge for their further developments. Therefore, it is urgently necessary to investigate and explore the rational design and synthesis of high-performance organic photothermal cocrystals for future applications. This review first and systematically summarizes the organic photothermal cocrystal in terms of molecular classification, the photothermal conversion mechanism, and their corresponding applications. The timely interpretation of the cocrystal photothermal effect will provide broad prospects for the purposeful fabrication of excellent organic photothermal cocrystals toward great efficiency, low cost, and multifunctionality., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Highly spatial and angular precision in epitaxial-growth process is crucial for constructing organic low-dimensional heterostructures (OLDHs) with the desired substructures, which remains significant challenge owing to the unpredicted location of complex heterogeneous nucleation. Herein, a dynamic epitaxial-growth approach is developed along the tailored longitudinal/horizontal directions to create diverse OLDHs with hierarchical architectures. The controlled morphology evolution of seed crystals from kinetic to thermodynamic species is achieved via incrementally increasing the crystallization time from 0 to 600 s. Accordingly, the kinetic and thermodynamic seed crystals respectively present the specific lattice-matching crystal-planes of (100) and (011), which facilitates the longitudinal epitaxial-growth (LG) process for triblock heterostructures, and the horizontal epitaxial-growth (HG) process for axial-branch heterostructures. The dominant core/shell heterostructures are prepared via both LG and HG processes with a crystallization time of ≈30 s. Significantly, these prepared OLDHs realize the rationally polarized exciton conversion for optical logic gate application through the exciton conversion and photon propagation at the heterojunction. This strategy provides an avenue for the precise synthesis of OLDHs with anisotropy optical characters for integrated optoelectronics., (© 2022 Wiley-VCH GmbH.)

Optical interconnects exhibit superior potential in the precise regulation of photon transmission for organic photonic circuits. However, the rational design of well-defined organic heterostructures toward active optoelectronics remains challenging. Herein, we designed organic branched heterostructures (OBHs) with accurate spatial organization for optical interconnection. Notably, the precise regulation of OBHs has been controllably achieved including the trunk morphologies and the branched microwire number. Significantly, these as-prepared OBHs inherently exhibit the multichannel coupling outputs and the excitation position-dependent waveguide characteristics, leading to various outcoupling signals with tunable intensity and emission colors. The optical interconnects are realized due to the occurrence of exciton conversion and photon propagation between branch and trunk at the heterojunction, benefiting the application possibilities of two-dimensional (2D) optical barcodes., (© 2022 Wiley-VCH GmbH.)

Harvesting the narrow bandgap excitons of charge-transfer (CT) complexes for the achievement of near-infrared (NIR) emission has attracted intensive attention for its fundamental importance and practical application. Herein, the triphenylene (TP)-2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F 4 TCNQ) CT organic complex is designed and fabricated via the supramolecular self-assembly process, which demonstrates the NIR emission with a maximum peak of 770 nm and a photoluminescence quantum yield (PLQY) of 5.4%. The segregated stacking mode of TP-F 4 TCNQ CT complex based on the multiple types of intermolecular interaction has a low CT degree of 0.00103 and a small counter pitch angle of 40° between F 4 TCNQ and TP molecules, which breaks the forbidden electronic transitions of CT state, resulting in the effective NIR emission. Acting as the promising candidates for the active optical waveguide in the NIR region beyond 760 nm, the self-assembled TP-F 4 TCNQ single-crystalline organic microwires display an ultralow optical-loss coefficient of 0.060 dB µm -1 . This work holds considerable insights for the exploration of novel NIR-emissive organic materials via an universal "cocrystal engineering" strategy., (© 2022 Wiley-VCH GmbH.)

White-light-emissive organic micro/nanostructures hold exotic potential applications in full-color displays, on-chip wavelength-division multiplexing, and backlights of portable display devices, but are rarely realized in organic core/shell heterostructures. Herein, through regulating the noncovalent interactions between organic semiconductor molecules, a hierarchical self-assembly approach of horizontal epitaxial-growth is demonstrated for the fine synthesis of organic core/mono-shell microwires with multicolor emission (red-green, red-blue, and green-blue) and especially organic core/double-shell microwires with radial red-green-blue (RGB) emission, whose components are dibenzo[g,p]chrysene (DgpC)-based charge-transfer (CT) complexes. In fact, the desired lattice mismatching (≈2%) and the excellent structure compatibility of these CT complexes facilitate the epitaxial-growth process for the facile synthesis of organic core/shell microwires. With the RGB-emissive substructures, these core/double-shell organic microwires are microscale white-light sources (CIE [0.34, 0.36]). Besides, the white-emissive core/double-shell microwires demonstrate the fascinating full-spectrum light transportation from 400 to 700 nm. This work indeed opens up a novel avenue for the accurate construction of organic core/shell heterostructures, which provides an attractive platform for the organic integrated optoelectronics., (© 2021 Wiley-VCH GmbH.)

Near-infrared (NIR) organic solid-state lasers play an essential role in applications ranging from laser communication to infrared night vision, but progress in this area is restricted by the lack of effective excited-state gain processes. Herein, we originally proposed and demonstrated the cascaded occurrence of excited-state intramolecular proton transfer for constructing the completely new energy-level systems. Cascading by the first ultrafast proton transfer of <430 fs and the subsequent irreversible second proton transfer of ca. 1.6 ps, the stepwise proton transfer process favors the true six-level photophysical cycle, which supports efficient population inversion and thus NIR single-mode lasing at 854 nm. This work realizes longest wavelength beyond 850 nm of organic single-crystal lasing to date and originally exploits the cascaded excited-state molecular proton transfer energy-level systems for organic solid-state lasers., (© 2021 Wiley-VCH GmbH.)

Anisotropic organic molecular construction and packing are crucial for the optoelectronic properties of organic crystals. Two-dimensional (2D) organic crystals with regular morphology and good photon confinement are potentially suitable for a chip-scale planar photonics system. Herein, through the bottom-up process, 2D halogen-bonded DPEpe-F 4 DIB cocrystals were fabricated that exhibit an asymmetric optical waveguide with the optical-loss coefficients of R Backward =0.0346 dB μm -1 and R Forward =0.0894 dB μm -1 along the [010] crystal direction, which can be attributed to the unidirectional total internal reflection caused by the anisotropic molecular packing mode. Based on this crystal direction-oriented asymmetric photon transport, these as-prepared 2D cocrystals have been demonstrated as a microscale optical logic gate with multiple input/out channels, which will offer potential applications as the 2D optical component for the integrated organic photonics., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Exploiting organic/inorganic hybrid perovskite solar cells (PSCs) with reduced Pb content is very important for developing environment-friendly photovoltaics. Utilizing of Pb-Sn alloying perovskite is considered as an efficient route to reduce the risk of ecosystem pollution. However, the trade-off between device performance and Sn substitution ratio due to the instability of Sn 2+ is a current dilemma. Here, for the first time, the highly efficient Pb-Sn-Cu ternary PSCs are reported by partial replacing of PbI 2 with SnI 2 and CuBr 2 . Sn 2+ substitution results in a redshift of the absorption onset, whereas worsens the film quality. Interestingly, Cu 2+ introduction can passivate the trap sites at the crystal boundaries of Pb-Sn perovskites effectively. Consequently, a power conversion efficiency as high as 21.08% in inverted planar Pb-Sn-Cu ternary PSCs is approached. The finding opens a new route toward the fabrication of high efficiency Pb-Sn alloying perovskite solar cells by Cu 2+ passivation., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Organic semiconductor micro-/nanocrystals with regular shapes have been demonstrated for many applications, such as organic field-effect transistors, organic waveguide devices, organic solid-state lasers, and therefore are inherently ideal building blocks for the key circuits in the next generation of miniaturized optoelectronics. In the study, blue-emissive organic molecules of 1,4-bis(2-methylstyryl)benzene (o-MSB) can assemble into rectangular microcrystals at a large scale via the room-temperature solution-exchange method. Because of the Förster resonance energy transfer, the energy of the absorbed photons by the host matrix organic molecules of o-MSB can directly transfer to the dopant organic molecules of tetracene or 1,2:8,9-dibenzopentacene (DBP), which then emit visible photons in different colors from blue to green, and to yellow. More impressively, by modulating the doping molar ratios of DBP to o-MSB, bright white-emissive organic microcrystals with well-preserved rectangular morphology can be successfully achieved with a low doping ratio of 1.5%. These self-assembled organic semiconductor microcrystals with multicolor emissions can be the white-light sources for the integrated optical circuits at micro-/nanoscale., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)