Search

Ryanodane diterpenes are structurally complex natural products that are well-known for their high degree of oxidation and the challenges associated with synthesizing them within the terpene class. Herein, we present a two-stage synthetic strategy that draws inspiration from the broad biosynthesis of terpenes, allowing us to achieve the first chemical synthesis of garajonone, a ryanodane diterpenoid that occurs naturally at low abundance, as well as its epimer, 3-epi-garajonone. The key to this success lies in the rapid construction of the carbon framework of the target molecule by employing an early-stage palladium-catalyzed Heck/carbonylative esterification cascade annulation, followed by successive late-stage selective redox manipulation to establish the desired oxidation state of the molecule. This research not only showcases the synthesis of garajonone and its epimer but also provides a platform for the chemical synthesis of other members and analogs of this complex diterpenoid family., (© 2024 Wiley-VCH GmbH.)

Herein, we present a unified chemical synthesis of three subgroups of cephalotaxus diterpenoids. Key to the success lies in adopting a synthetic strategy that is inspired by biosynthesis but is opposite in nature. By employing selective one-carbon introduction and ring expansion operations, we have successfully converted cephalotane-type C 18 dinorditerpenoids (using cephanolide B as a starting material) into troponoid-type C 19 norditerpenoids and intact cephalotane-type C 20 diterpenoids. This synthetic approach has enabled us to synthesize cephinoid H, 13-oxo-cephinoid H, 7-oxo-cephinoid H, fortalpinoid C, 7-epi-fortalpinoid C, cephanolide E, and 13-epi-cephanolide E. Furthermore, through the development of an intermolecular asymmetric Michael reaction between β-oxo esters and β-substituted enones, we have achieved the enantioselective synthesis of advanced intermediates within our synthetic sequence, thus formally realizing the asymmetric total synthesis of the cephalotaxus diterpenoids family., (© 2024 Wiley-VCH GmbH.)

The inherently huge volume expansion during Li uptake has hindered the use of Si-based anodes in high-energy lithium-ion batteries. While some pore-forming and nano-architecting strategies show promises to effectively buffer the volume change, other parameters essential for practical electrode fabrication, such as compaction density, are often compromised. Here we propose a new in situ Mg doping strategy to form closed-nanopore structure into a micron-sized SiO x particle at a high bulk density. The doped Mg atoms promote the segregation of O, so that high-density magnesium silicates form to generate closed nanopores. By altering the mass content of Mg dopant, the average radii (ranged from 5.4 to 9.7 nm) and porosities (ranged from 1.4 % to 15.9 %) of the closed pores are precisely adjustable, which accounts for volume expansion of SiO x from 77.8 % to 22.2 % at the minimum. Benefited from the small volume variation, the Mg-doped micron-SiO x anode demonstrates improved Li storage performance towards realization of a 700-(dis)charge-cycle, 11-Ah-pouch-type cell at a capacity retention of >80 %. This work offers insights into reasonable design of the internal structure of micron-sized SiO x and other materials that undergo conversion or alloying reactions with drastic volume change, to enable high-energy batteries with stable electrochemistry., (© 2024 Wiley-VCH GmbH.)

A mononuclear valence tautomeric (VT) complex, [Co(pycz) 2 (Sq)(Cat)] (1-trans), where pycz = 9-(pyridin-4-yl)-9H-carbazole, Sq⋅ - = 3,5-di-tert-butyl-semiquinonato, and Cat 2- = 3,5-di-tert-butyl-catecholato, is synthesized in the trans configuration, which undergoes one-step valence tautomeric transition above room temperature. Remarkably, 1-trans can transform into its isomeric structure, [Co(pycz) 2 (Sq)(Sq)] (1-cis), at temperature above 350 K in a single-crystal-to-single-crystal way by in situ molecular twist, and the resulting 1-cis exhibits a pronounced two-step VT transition during magnetic measurements that is rare for mononuclear VT complexes. Such drastic solid-state structural transformation is reported in VT compounds for the first time, which is actuated by a crystal surface's melting-recrystallization induced phase transition process. DFT calculations offer an underlying mechanism suggesting a concerted bond rotation during the structural transformation. The results demonstrate an unconventional approach that realizes structural transformation of VT complexes and the control of VT performance., (© 2024 Wiley‐VCH GmbH.)

Secondary metabolites that have the same biological origin must share some relationship in their biosynthesis. Exploring this relationship has always been a significant task for synthetic biologists. However, from the perspective of synthetic chemists, it is equally important to propose, prove, or refute potential biosynthetic pathways in order to elucidate and understand the biosynthesis of homologous secondary metabolites. In this study, driven by the high structural similarity between the homologous Ganoderma meroterpenoids cochlearol B and ganocin B, two chemically synthetic strategies were designed and investigated sequentially for the synthesis of cochlearol B from ganocin B. These strategies include intramolecular metal-catalyzed hydrogen atom transfer (MHAT) and intramolecular photochemical [2+2] cycloaddition. The aim was to reveal their potential biosynthetic conversion relationship using chemical synthesis methods. As a result, a highly efficient total synthesis of cochlearol B, cochlearol T, cochlearol F, as well as the formal total synthesis of ganocins A-B, and ganocochlearins C-D, has been achieved. Additionally, a novel synthetic approach for the synthesis of 6,6-disubstituted 6H-dibenzo[b,d]pyran and its analogues has been developed through palladium(II)-catalyzed Wacker-type/cross-coupling cascade reactions., (© 2024 Wiley‐VCH GmbH.)

Hypoxia is an important feature, which can upregulate the hypoxia-inducible factor-1α (HIF-1α) expression and promote the activation of hepatic stellate cells (HSCs), leading to liver fibrosis. Currently, effective treatment for liver fibrosis is extremely lacking. Herein, a safe and effective method is established to downregulate the expression of HIF-1α in HSCs via targeted delivery of VA-PEG-modified CNs-based nanosheets-encapsulated (VA-PEG-CN@GQDs) HIF-1α small interfering RNA (HIF-1α-siRNA). Due to the presence of lipase in the liver, the reversible release of siRNA can be promoted to complete the transfection process. Simultaneously, VA-PEG-CN@GQD nanosheets enable trigger the water splitting process to produce O 2 under near-infrared (NIR) irradiation, thereby improving the hypoxic environment of the liver fibrosis site and maximizing the downregulation of HIF-1α expression to improve the therapeutic effect, as demonstrated in liver fibrosis mice. Such combination therapy can inhibit the activation of HSCs via HIF-1α-mediated TGF-β1/Smad pathway, achieving outstanding therapeutic effects in liver fibrosis mice. In conclusion, this study proposes a novel strategy for the treatment of liver fibrosis by regulating the hypoxic environment and the expression of HIF-1α at lesion site., (© 2023 Wiley-VCH GmbH.)

Herein, we report a concise and divergent synthesis of the complex hasubanan alkaloids metaphanine and oxoepistephamiersine from commercially available and inexpensive cyclohexanedione monoethylene acetal. Our synthesis features a palladium-catalyzed cascade cyclization reaction to set the tricyclic carbon framework of the desired molecules, a regioselective Baeyer-Villiger oxidation followed by a MeNH 2 triggered skeletal reorganization cascade to construct the benzannulated aza[4.4.3]propellane, and a strategically late-stage regio-/diastereoselective oxidative annulation of sp 3 C-H bond to form the challenging THF ring system and hemiketal moiety in a single step. In addition, a highly enantioselective alkylation of cyclohexanedione monoethylene acetal paved the way for the asymmetric synthesis of target molecular., (© 2023 Wiley-VCH GmbH.)

Ether solvents with superior reductive stability promise excellent interphasial stability with high-capacity anodes while the limited oxidative resistance hinders their high-voltage operation. Extending the intrinsic electrochemical stability of ether-based electrolytes to construct stable-cycling high-energy-density lithium-ion batteries is challenging but rewarding. Herein, the anion-solvent interactions were concerned as the key point to optimize the anodic stability of the ether-based electrolytes and an optimized interphase was realized on both pure-SiO x anodes and LiNi 0.8 Mn 0.1 Co 0.1 O 2 cathodes. Specifically, the small-anion-size LiNO 3 and tetrahydrofuran with high dipole moment to dielectric constant ratio realized strengthened anion-solvent interactions, which enhance the oxidative stability of the electrolyte. The designed ether-based electrolyte enabled a stable cycling performance over 500 cycles in pure-SiO x ||LiNi 0.8 Mn 0.1 Co 0.1 O 2 full cell, demonstrating its superior practical prospects. This work provides new insight into the design of new electrolytes for emerging high-energy density lithium-ion batteries through the regulation of interactions between species in electrolytes., (© 2023 Wiley-VCH GmbH.)

Single-wall carbon nanotube/silicon (SWCNT/Si) heterojunction shows appealing potential for use in photovoltaic devices. However, the relatively low conductivity of SWCNT network and interfacial recombination of carriers have limited their photovoltaic performance. Herein, a multifunctional Lewis acid (p-toluenesulfonic acid, TsOH) is used to significantly reduce the energy loss in SWCNT/Si solar cells. Owing to the charge transfer doping effect of TsOH, the conductivity and work function of SWCNT films are optimized and tuned. More importantly, a chemical bridge is constructed at the interface of SWCNT/Si heterojunction. Experimental studies indicate that the phenyl group of TsOH can interact with SWCNTs through π-π interaction, meanwhile, the oxygen in the sulfonic functional group of the TsOH molecule can graft on the dangling bonds of the Si surface. The chemical bridge structure effectively suppresses the recombination of photogenerated carriers. The TsOH coating also works as an antireflection layer, leading to a 19% increment of the photocurrent. As a result, a champion power conversion efficiency of 17.7% is achieved for the TsOH-SWCNT/Si device, and it also exhibits an excellent stability, retaining more than 96% of the initial efficiency in the ambient air after 1 month., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

As a rapidly growing family of 2D transition metal carbides and nitrides, MXenes are recognized as promising materials for the development of future electronics and optoelectronics. So far, the reported patterning methods for MXene films lack efficiency, resolution, and compatibility, resulting in limited device integration and performance. Here, a high-performance MXene image sensor array fabricated by a wafer-scale combination patterning method of an MXene film is reported. This method combines MXene centrifugation, spin-coating, photolithography, and dry-etching and is highly compatible with mainstream semiconductor processing, with a resolution up to 2 µm, which is at least 100 times higher than other large-area patterning methods reported previously. As a result, a high-density integrated array of 1024-pixel Ti 3 C 2 T x /Si photodetectors with a detectivity of 7.73 × 10 14 Jones and a light-dark current ratio (I light /I dark ) of 6.22 × 10 6 , which is the ultrahigh value among all reported MXene-based photodetectors, is fabricated. This patterning technique paves a way for large-scale high-performance MXetronics compatible with mainstream semiconductor processes., (© 2022 Wiley-VCH GmbH.)

A divergent synthetic approach to six Ganoderma meroterpenoids, namely ganocins A-C, ganocochlearins C and D, and cochlearol T, has been developed for the first time. This synthetic route features a two-phase strategy which includes early-stage rapid construction of a common planar tricyclic intermediate followed by highly selective late-stage transformations into various Ganoderma meroterpenoids. Key to the strategy are a bioinspired intramolecular hetero-Diels-Alder reaction and Stahl-type oxidative aromatization, allowing efficient formation of the common tricyclic phenol intermediate. A nucleophilic dearomatization of the phenol unit, combined with a regioselective 1,4-reduction of the resulting dienone, enabled rapid access to ganocins B and C. Additionally, site-selective Mukaiyama hydration, followed by an intramolecular oxa-Michael addition/triflation cascade, served as a key strategic element in the chemical synthesis of ganocin A., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The oxygen reduction reaction (ORR) is one of the most important reactions in life processes and energy conversion systems. To alleviate global warming and the energy crisis, the development of high-performance electrocatalysts for the ORR for application in energy conversion and storage devices such as metal-air batteries and fuel cells is highly desirable. Inspired by the biological oxygen activation/reduction process associated with heme- and multicopper-containing metalloenzymes, iron and copper-based transition-metal complexes have been extensively explored as ORR electrocatalysts. Herein, an outline into recent progress on non-precious-metal electrocatalysts for the ORR is provided; these electrocatalysts do not require pyrolysis treatment, which is regarded as desirable from the viewpoint of bioinspired molecular catalyst design, focusing on iron/cobalt macrocycles (porphyrins, phthalocyanines, and corroles) and copper complexes in which the ORR activity is tuned by ligand variation/substitution, the method of catalyst immobilization, and the underlying supporting materials. Current challenges and exciting imminent developments in bioinspired ORR electrocatalysts are summarized and proposed., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The root of Cynanchum auriculatum (C. auriculatum) Royle ex Wight has been shown to possess various pharmacological effects and has recently attracted much attention with respect to its potential role in antitumor activity. The C-21 steroidal glycosides are commonly accepted as the major active ingredients of C. auriculatum. In this study, the antitumor abilities of different extracted fractions of the root bark and the root tuber of C. auriculatum were investigated by using a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay in human cancer cell lines HepG2 and SMMC-7721. The results showed that the chloroform and ethyl acetate fractions of the root tuber suppressed tumor cell growth strongly. To identify and characterize the chemical constituents of different active fractions, an ultra high performance liquid chromatography with triple-quadrupole tandem mass spectrometry method was developed for the simultaneous quantitation of eight C-21 steroidal glycosides. The analysis revealed that the C-21 steroidal glycosides were concentrated in the chloroform and ethyl acetate fractions, and the total contents of different fractions in the root tuber were significantly higher than those of corresponding ones in the root bark. Furthermore, the C-21 steroidal glycosides based on different types of aglucones were prone in different medicinal parts of C. auriculatum., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A new multicomponent synthesis of functionalized enamidyl triazoles starting from simple and readily available starting materials is described. A simple treatment of a dichloromethane solution of an azide, amine, and 5-bromo-2-furylcarbinol with a Lewis acid provides the enamidyl triazole in good to high yield. A triple domino sequence, formal [3+2] cycloaddition/ring-opening/amidation, is involved in this new skeleton-generating reaction., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

An enantioselective total synthesis of the polycyclic diterpene (+)-chatancin, a potent PAF antagonist, is reported. Proceeding in seven steps from dihydrofarnesal, this synthetic route was designed to circumvent macrocyclization-based strategies to complex, cyclized cembranoids. The described synthesis requires only six chromatographic purifications, is high yielding, and avoids protecting-group manipulations. An X-ray crystal structure of this fragile marine natural product was obtained., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Attempts to create metal-organic frameworks (MOFs) with zeolitic topologies, metal (zinc(II) and cobalt(II)) imidazolates have repeatedly been used as the metal-organic motifs of inorganic silicate analogues. By modulating the synthetic strategy based on the solvothermal and liquid diffusion method, seven further MOFs (including at least three zeolitic MOFs) of zinc(II) imidazolates, [Zn(im)2.x G] (G=guest molecule, x=0.2-1) 1 a-7 a, have been successfully synthesized. Of these, 1 a-3 a are isostructural with the previously reported cobalt analogues 1 b-3 b, respectively, while 4 a-7 a are new members of the metal imidazolate MOF family. Complex 4 a exhibits a structure related to silicate CaAl2Si2O8 of CrB4 topology, but with a higher network symmetry; complex 5 a has a structure with zeolitic DFT topology that was discovered in zeolite-related materials of DAF-2, UCSB-3, and UCSB-3GaGe; complex 6 a demonstrates an unprecedented zeolite-like topology with one dimensional channels with 10-rings; and 7 a displays a structure of natural zeolite GIS (gismondine) topology. All of these polymorphous MOFs were created only by using certain solvents as structure-directing agents (SDAs). Further extensive metal-organic frameworks with zeolitic topologies can be envisaged if other solvents were to be used.

Single-crystalline hexagonal alpha-Fe(2)O(3) nanorods/nanobelts have been created by a simple iron-water reaction in the low-temperature range of 350-450 degrees C. Scanning electron microscopy examination shows that the needle-like products, radiating from and perpendicular to the original large iron particle surfaces, are up to a few micrometers in length with an average diameter from 20 nm (tip) to 100 nm (base). X-ray photoelectron spectroscopy and FTIR spectroscopy reveal that the outermost surface of the nanorods consists of Fe(2)O(3) without organic impurity contaminants, which could possibly result from other methods, such as hydrothermal growth. Nanobelt-like structures are believed to result from a combination of increased reaction temperature and time. The initial formation and subsequent growth of alpha-Fe(2)O(3) nanorods may be explained by the iron metal corrosion mechanism.