Search

One of the key catalytic reactions for life on earth, the oxidation of water to molecular oxygen, occurs in the oxygen-evolving complex of the photosystem II (PSII) mediated by a manganese-containing cluster. Considerable efforts in this research area embrace the development of efficient artificial manganese-based catalysts for the oxygen evolution reaction (OER). Using artificial OER catalysts for selective oxygenation of organic substrates to produce value-added chemicals is a worthwhile objective. However, unsatisfying catalytic performance and poor stability have been a fundamental bottleneck in the field of artificial PSII analogs. Herein, for the first time, a manganese-based anode material is developed and paired up for combining electrocatalytic water oxidation and selective oxygenations of organics delivering the highest efficiency reported to date. This can be achieved by employing helical manganese borophosphates, representing a new class of materials. The uniquely high catalytic activity and durability (over 5 months) of the latter precursors in alkaline media are attributed to its unexpected surface transformation into an amorphous MnO x phase with a birnessite-like short-range order and surface-stabilized Mn III sites under extended electrical bias, as unequivocally demonstrated by a combination of in situ Raman and quasi in situ X-ray absorption spectroscopy as well as ex situ methods., (© 2021 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

Facile electromodification of metallic NiFe alloys leads to a series of NiFe oxyhydroxide surface films with excellent electrocatalytic performance in alkaline water oxidation. During cyclic voltammetry and after sudden potential jumps between noncatalytic and catalytic potentials, Ni oxidation/reduction was tracked with millisecond time resolution by a UV/Vis reflectance signal. Optimal catalysis at intermediate Ni/Fe ratios is explained by two opposing trends for increasing Fe content: a) pronounced slowdown of the Ni 2+ /Ni 3+ oxidation step and b) increased reactivity of the most oxidized catalyst state detectable at catalytic potentials. This state may involve an equilibrium between Ni 4+ ions and Ni 2+ ions with neighboring ligand holes, possibly in the form of bound peroxides., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Water-oxidizing calcium-manganese oxides, which mimic the inorganic core of the biological catalyst, were synthesized and structurally characterized by X-ray absorption spectroscopy at the manganese and calcium K edges. The amorphous, birnesite-type oxides are obtained through a simple protocol that involves electrodeposition followed by active-site creation through annealing at moderate temperatures. Calcium ions are inessential, but tune the electrocatalytic properties. For increasing calcium/manganese molar ratios, both Tafel slopes and exchange current densities decrease gradually, resulting in optimal catalytic performance at calcium/manganese molar ratios of close to 10 %. Tracking UV/Vis absorption changes during electrochemical operation suggests that inactive oxides reach their highest, all-Mn(IV) oxidation state at comparably low electrode potentials. The ability to undergo redox transitions and the presence of a minor fraction of Mn(III) ions at catalytic potentials is identified as a prerequisite for catalytic activity., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Is water oxidation catalyzed at the surface or within the bulk volume of solid oxide materials? This question is addressed for cobalt phosphate catalysts deposited on inert electrodes, namely crystallites of pakhomovskyite (Co3(PO4)2⋅8 H2O, Pak) and phosphate-containing Co oxide (CoCat). X-ray spectroscopy reveals that oxidizing potentials transform the crystalline Pak slowly (5-8 h) but completely into the amorphous CoCat. Electrochemical analysis supports high-TOF surface activity in Pak, whereas its amorphization results in dominating volume activity of the thereby formed CoCat material. In the directly electrodeposited CoCat, volume catalysis prevails, but not at very low levels of the amorphous material, implying high-TOF catalysis at surface sites. A complete picture of heterogeneous water oxidation requires insight in catalysis at the electrolyte-exposed "outer surface", within a hydrated, amorphous volume phase, and modes and kinetics of restructuring upon operation., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A mild screen-printing method was developed to coat conductive oxide surfaces (here: fluorine-doped tin oxide) with micrometer-thick layers of presynthesized calcium manganese oxide (Ca-birnessite) particles. After optimization steps concerning the printing process and layer thickness, electrodes were obtained that could be used as corrosion-stable water-oxidizing anodes at pH 7 to yield current densities of 1 mA cm(-2) at an overpotential of less than 500 mV. Analyses of the electrode coatings of optimal thickness (≈10 μm) indicated that composition, oxide phase, and morphology of the synthetic Ca-birnessite particles were hardly affected by the screen-printing procedure. However, a more detailed analysis by X-ray absorption spectroscopy revealed small modifications of both the Mn redox state and the structure at the atomic level, which could affect functional properties such as proton conductivity. Furthermore, the versatile new screen-printing method was used for a comparative study of various transition-metal oxides concerning electrochemical water oxidation under "artificial leaf conditions" (neutral pH, fairly low overpotential and current density), for which a general activity ranking of RuO2 >Co3 O4 ≈(Ca)MnOx ≈NiO was observed. Within the group of screened manganese oxides, Ca-birnessite performed better than "Mn-only materials" such as Mn2 O3 and MnO2 ., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Water oxidation in the neutral pH regime catalyzed by amorphous transition-metal oxides is of high interest in energy science. Crucial determinants of electrocatalytic activity were investigated for a cobalt-based oxide film electrodeposited at various thicknesses on inert electrodes. For water oxidation at low current densities, the turnover frequency (TOF) per cobalt ion of the bulk material stayed fully constant for variation of the thickness of the oxide film by a factor of 100 (from about 15 nm to 1.5 μm). Thickness variation changed neither the nanostructure of the outer film surface nor the atomic structure of the oxide catalyst significantly. These findings imply catalytic activity of the bulk hydrated oxide material. Nonclassical dependence on pH was observed. For buffered electrolytes with pKa values of the buffer base ranging from 4.7 (acetate) to 10.3 (hydrogen carbonate), the catalytic activity reflected the protonation state of the buffer base in the electrolyte solution directly and not the intrinsic catalytic properties of the oxide itself. It is proposed that catalysis of water oxidation occurs within the bulk hydrated oxide film at the margins of cobalt oxide fragments of molecular dimensions. At high current densities, the availability of a proton-accepting base at the catalyst-electrolyte interface controls the rate of water oxidation. The reported findings may be of general relevance for water oxidation catalyzed at moderate pH by amorphous transition-metal oxides., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

For the production of nonfossil fuels, water oxidation by inexpensive cobalt-based catalysts is of high interest. Films for the electrocatalysis of water oxidation were obtained by oxidative self-assembly (electrodeposition) from aqueous solutions containing, apart from Co, either K, Li or Ca with either a phosphate, acetate or chloride anion. X-ray absorption spectroscopy (XAS) at the Co K-edge revealed clusters of edge-sharing CoO(6) octahedra in all films, but the size or structural disorder of the Co-oxido clusters differed. Whereas potassium binding is largely unspecific, CaCo(3) O(4) cubanes, which resemble the CaMn(3) O(4) cubane of the biological catalyst in oxygenic photosynthesis, may form, as suggested by XAS at the Ca K-edge. Cyclic voltammograms in a potassium phosphate buffer at pH 7 revealed that no specific combination of anions and redox-inactive cations is required for catalytic water oxidation. However, the anion type modulates not only the size (or order) of the Co-oxido clusters, but also electrodeposition rates, redox potentials, the capacity for oxidative charging, and catalytic currents. On these grounds, structure-activity relations are discussed., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)