Search

Herein, we report a highly selective production route for butadiene from γ-valerolactone over zeolite catalysts. The catalytic performance of eight zeolites with different framework topologies were compared, revealing that zeolites with narrower 10-membered ring channels exhibit enhanced selectivity of butadiene. Specifically, ZSM-35 and ZSM-22, featuring the narrowest 10-membered ring channels, demonstrate the highest butadiene selectivity to 61 % and 59 %, respectively. Notably, surface passivation of ZSM-35 leads to a remarkable increase in butadiene selectivity to 82 %, maintaining a 99 % conversion. Additionally, we propose a reaction network and identify cyclopentenone as a key intermediate in the transformation of γ-valerolactone to butadiene. Both experimental and theoretical results conclude that confinement effect of 10-membered ring channels improves the selectivity of butadiene., (© 2024 Wiley-VCH GmbH.)

Anode-free sodium metal batteries (AFSMBs) are regarded as the "ceiling" for current sodium-based batteries. However, their practical application is hindered by the unstable electrolyte and interfacial chemistry at the high-voltage cathode and anode-free side, especially under extreme temperature conditions. Here, an advanced electrolyte design strategy based on electrolyte solvation engineering is presented, which shapes a weakly solvating anion-stabilized (WSAS) electrolyte by balancing the interaction between the Na + -solvent and Na + -anion. The special interaction constructs rich contact ion pairs (CIPs) /aggregates (AGGs) clusters at the electrode/electrolyte interface during the dynamic solvation process which facilitates the formation of a uniform and stable interfacial layer, enabling highly stable cycling of 4.0 V-class layered oxide cathode from -40 °C to 60 °C and excellent reversibility of Na plating/stripping with an ultrahigh average CE of 99.89%. Ultimately, industrial multi-layer anode-free pouch cells using the WSAS electrolyte achieve 80% capacity remaining after 50 cycles and even deliver 74.3% capacity at -30 °C. This work takes a pivotal step for the further development of high-energy-density Na batteries., (© 2024 Wiley‐VCH GmbH.)

Organic-inorganic halide perovskite solar cells (PSCs) have attracted significant attention in photovoltaic research, owing to their superior optoelectronic properties and cost-effective manufacturing techniques. However, the unbalanced charge carrier diffusion length in perovskite materials leads to the recombination of photogenerated electrons and holes. The inefficient charge carrier collecting process severely affects the power conversion efficiency (PCE) of the PSCs. Herein, a solution-processed SnO 2 array electron transport layer with precisely tunable micro-nanostructures is fabricated via a bubble-template-assisted approach, serving as both electron transport layers and scaffolds for the perovskite layer. Due to the optimized electron transporting pathway and enlarged perovskite grain size, the PSCs achieve a PCE of 25.35% (25.07% certificated PCE)., (© 2024 Wiley‐VCH GmbH.)

Strong metal-support interactions (SMSI) are crucial for stabilizing sub-2 nm metal sites, e.g. single atom (M1) or cluster (Mn). However, further optimizing sub-2 nm sites to break the activity-stability trade-off due to excessive interactions remains significant challenges. Accordingly, for the first time, we propose synergizing SMSI with reactive metal-support interactions (RMSI). Comprehensive characterization confirms that the SMSI stabilizes the metal and regulates the aggregation of Ni1 into Nin site within sub-2 nm. Meanwhile, RMSI modulates Nin through sufficiently activating P in the support and eventually generates sub-2 nm metal phosphide Ni2P cluster (Ni2Pn). The synergetic metal-support interactions triggered the adaptive coordination and electronic structure optimization of Ni2Pn, leading to the desired substrate adsorption-desorption kinetics. Consequently, the activity of Ni2Pn site greatly enhanced towards the selective hydrogenations of p-chloronitrobenzene and alkynyl alcohol. The formation rates of target products are up to 20.2 and 3.0 times greater than that of Ni1 and Nin site, respectively. This work may open a new direction for metal-support interactions and promote innovation and application of active sites below 2 nm., (© 2024 Wiley‐VCH GmbH.)

We report an endoperoxide compound (E5) which can deliver three therapeutic components by a thermal cycloreversion, namely, singlet oxygen, triplet oxygen and 3-methyl-N-phenyl-2-pyridone (P5), thus targeting multiple mechanisms for treating non-small cell lung cancer and idiopathic pulmonary fibrosis. In aqueous environment, E5 undergoes clean reaction to afford three therapeutic components with a half-life of 8.3 hours without the generation of other by-products, which not only achieves good cytotoxicity toward lung cancer cells and decreases the levels of hypoxia-inducible factor 1α (HIF-1α) protein, but also inhibits the transforming growth factor β1 (TGF-β1) induced fibrosis in vitro. In vivo experiments also demonstrated the efficacy of E5 in inhibiting tumor growth and relieving idiopathic pulmonary fibrosis, while exhibiting good biocompatibility. Many lines of evidence reveal the therapeutic efficacy of singlet oxygen and 3-methyl-N-phenyl-2-pyridone for these two lung diseases, and triplet oxygen could downregulate HIF-1α and relieve tumor hypoxia which is a critical issue in photodynamic therapy (PDT). Unlike other combination therapies, in which multiple therapeutic agents are given in independent formulations, our work demonstrates single molecule endoperoxide prodrugs could be developed as new platforms for treatment of cancers and related diseases., (© 2024 Wiley-VCH GmbH.)

Nitric oxide (NO) is an important signaling molecule in both healthy and pathological processes. In this work, we present the first example of a novel class of organic NO-donor compounds with minimal toxicity.  The release is driven by the reaction of singlet oxygen spontaneously produced by the cycloreversion reaction of the endoperoxide.  Cell culture and imaging data confirms the release of NO in this bimodular system., (© 2024 Wiley‐VCH GmbH.)

RNA splicing is a dynamic molecular process in response to environmental stimuli and is strictly regulated by the spliceosome. Sm proteins, constituents of the spliceosome, are key components that mediate splicing reactions; however, their potential role in hepatocellular carcinoma (HCC) is poorly understood. In the study, SNRPD2 (PD2) is found to be the most highly upregulated Sm protein in HCC and to act as an oncogene. PD2 modulates DDX39A intron retention together with HNRNPL to sustain the DDX39A short variant (39A_S) expression. Mechanistically, 39A_S can mediate MYC mRNA nuclear export to maintain high MYC protein expression, while MYC in turn potentiates PD2 transcription. Importantly, digitoxin can directly interact with PD2 and has a notable cancer-suppressive effect on HCC. The study reveals a novel mechanism by which DDX39A senses oncogenic MYC signaling and undergoes splicing via PD2 to form a positive feedback loop in HCC, which can be targeted by digitoxin., (© 2024 The Author(s). Advanced Science published by Wiley‐VCH GmbH.)

Compensating for the irreversible loss of limited active sodium (Na) is crucial for enhancing the energy density of practical sodium-ion batteries (SIBs) full-cell, especially when employing hard carbon anode with initially lower coulombic efficiency. Introducing sacrificial cathode presodiation agents, particularly those that own potential anionic oxidation activity with a high theoretical capacity, can provide additional sodium sources for compensating Na loss. Herein, Ni atoms are precisely implanted at the Na sites within Na 2 O framework, obtaining a (Na 0.89 Ni 0.05 □ 0.06 ) 2 O (Ni-Na 2 O) presodiation agent. The synergistic interaction between Na vacancies and Ni catalyst effectively tunes the band structure, forming moderate Ni-O covalent bonds, activating the oxidation activity of oxygen anion, reducing the decomposition overpotential to 2.8 V (vs Na/Na + ), and achieving a high presodiation capacity of 710 mAh/g ≈Na2O (Na 2 O decomposition rate >80%). Incorporating currently-modified presodiation agent with Na 3 V 2 (PO 4 ) 3 and Na 2/3 Ni 2/3 Mn 1/3 O 2 cathodes, the energy density of corresponding Na-ion full-cells presents an essential improvement of 23.9% and 19.3%, respectively. Further, not limited to Ni-Na 2 O, the structure-function relationship between the anionic oxidation mechanism and electrode-electrolyte interface fabrication is revealed as a paradigm for the development of sacrificial cathode presodiation agent., (© 2024 Wiley‐VCH GmbH.)

The past few decades have witnessed the rapid advancement and broad applications of flexible bioelectronics, in wearable and implantable electronics, brain-computer interfaces, neural science and technology, clinical diagnosis, treatment, etc. It is noteworthy that soft and elastic conductive hydrogels, owing to their multiple similarities with biological tissues in terms of mechanics, electronics, water-rich, and biological functions, have successfully bridged the gap between rigid electronics and soft biology. Multifunctional hydrogel bioelectronics, emerging as a new generation of promising material candidates, have authentically established highly compatible and reliable, high-quality bioelectronic interfaces, particularly in bioelectronic recording and stimulation. This review summarizes the material basis and design principles involved in constructing hydrogel bioelectronic interfaces, and systematically discusses the fundamental mechanism and unique advantages in bioelectrical interfacing with the biological surface. Furthermore, an overview of the state-of-the-art manufacturing strategies for hydrogel bioelectronic interfaces with enhanced biocompatibility and integration with the biological system is presented. This review finally exemplifies the unprecedented advancement and impetus toward bioelectronic recording and stimulation, especially in implantable and integrated hydrogel bioelectronic systems, and concludes with a perspective expectation for hydrogel bioelectronics in clinical and biomedical applications., (© 2024 Wiley‐VCH GmbH.)

Mounting clinical evidence suggests that a comprised intestinal barrier contributes to the progression of nonalcoholic steatohepatitis (NASH); nevertheless, the precise mechanism remains elusive. This study unveils a significant upregulation of nuclear receptor-binding SET domain protein 2 (NSD2) in the intestines of obese humans and mice subjected to a high-fat cholesterol diet (HFCD). Intestine-specific NSD2 knockout attenuated the progression of intestinal barrier impairment and NASH, whereas NSD2 overexpression exacerbated this progression. Mechanistically, NSD2 directly regulates the transcriptional activation of Ern1 by demethylating histone H3 at lysine 36 (H3K36me2), thus activating the ERN1-JNK axis to intensify intestinal barrier impairment and subsequently foster NASH progression. These findings elucidate the crucial role of NSD2-mediated H3K36me2 in intestinal barrier impairment, suggesting that targeting intestinal NSD2 can represent a novel therapeutic approach for NASH., (© 2024 The Author(s). Advanced Science published by Wiley‐VCH GmbH.)

Electrolyte engineering is crucial for improving cathode electrolyte interphase (CEI) to enhance the performance of lithium-ion batteries, especially at high charging cut-off voltages. However, typical electrolyte modification strategies always focus on the solvation structure in the bulk region, but consistently neglect the dynamic evolution of electrolyte solvation configuration at the cathode-electrolyte interface, which directly influences the CEI construction. Herein, we reveal an anti-synergy effect between Li+-solvation and interfacial electric field by visualizing the dynamic evolution of electrolyte solvation configuration at the cathode-electrolyte interface, which determines the concentration of interfacial solvated-Li+. The Li+ solvation in the charging process facilitates the construction of a concentrated (Li+-solvent/anion-rich) interface and anion-derived CEI, while the repulsive force derived from interfacial electric field induces the formation of a diluted (solvent-rich) interface and solvent-derived CEI. Modifying the electrochemical protocols and electrolyte formulation, we regulate the "inflection voltage" arising from the anti-synergy effect and prolong the lifetime of the concentrated interface, which further improves the functionality of CEI architecture., (© 2024 Wiley‐VCH GmbH.)

Tuning full-color emission of polymers holds significant promise. However, preparing unconventional luminescence polymers with color-tunability in dilute solution and understanding the relationship between non-covalent interactions and luminescent behavior remains a great challenge. We report two emitters (P1 and P2) incorporating tetracoordinate boron. The P1 with non-conjugated D-π-A structure, exhibited red delayed fluorescence at 645 nm with quantum yield of 9.15 % in aggregates. Notably, the emission wavelength of P1 can be tuned from 418 to 588 nm at different solvent. Similarly, the emission wavelength of P2 can also be adjusted by manipulating the interactions between the solvent and fluorophore. Experimental characterization and theoretical calculations indicate that the B←N bond and electronic interactions between solvent and fluorophore significantly regulate the equilibrium the electrostatic potential (ESP) and the intramolecular O⋅⋅⋅O interactions of P1, thereby modulating its emission wavelength. Additionally, these polymers showed excellent potential in fluoride ions detection. This work provides new insights into the complex effects of intermolecular interactions on luminescent properties., (© 2024 Wiley-VCH GmbH.)

In this study, state-of-the-art on-line pyrolysis MS (OP-MS) equipped with temperature-controlled cold trap and on-line pyrolysis GC/MS (OP-GC/MS) injected through high-vacuum negative-pressure gas sampling (HVNPGS) programming are originally designed/constructed to identify/quantify the dynamic change of common permanent gases and micromolecule organics from the anode/cathode-electrolyte reactions during thermal runaway (TR) process, and corresponding TR mechanisms are further perfected/complemented. On LiC x anode side, solid electrolyte interphase (SEI) would undergo continuous decomposition and regeneration, and the R-H + (e.g., HF, ROH, etc.) species derived from electrolyte decomposition would continue to react with Li/LiC x to generate H 2 . Up to above 200 °C, the O 2 would release from the charged NCM cathode and organic radicals would be consumed/oxidized by evolved O 2 to form CO x , H 2 O, and more corrosive HF. On the contrary, charged LFP cathode does not present obvious O 2 evolution during heating process and the unreacted flammable/toxic organic species would exit in the form of high temperature/high-pressure (HT/HP) vapors within batteries, indicating higher potential safety risks. Additionally, the in depth understanding of the TR mechanism outlined above provides a clear direction for the design/modification of thermostable electrodes and non-flammable electrolytes for safer batteries., (© 2024 Wiley‐VCH GmbH.)

Intrinsically safe sodium-ion batteries are considered as a promising candidate for large-scale energy storage systems. However, the high flammability of conventional electrolytes may pose serious safety threats and even explosions. Herein, a strategy of constructing a deep eutectic electrolyte is proposed to boost the safety and electrochemical performance of succinonitrile (SN)-based electrolyte. The strong hydrogen bond between S═O of 1,3,2-dioxathiolane-2,2-dioxide (DTD) and the α-H of SN endows the enhanced safety and compatibility of SN with Lewis bases. Meanwhile, the DTD participates in the inner Na + sheath and weakens the coordination number of SN. The unique solvation configuration promotes the formation of robust gradient inorganic-rich electrode-electrolyte interphase, and merits stable cycling of half-cells in a wide temperature range, with a capacity retention of 82.8% after 800 cycles (25 °C) and 86.3% after 100 cycles (60 °C). Correspondingly, the full cells deliver tremendous improvement in cycling stability and rate performance., (© 2024 Wiley‐VCH GmbH.)

Negative thermal expansion (NTE) compounds provide a solution for the mismatch of coefficients of thermal expansion in highly integrated device design. However, the current NTE compounds are rare, and how to effectively design new NTE compounds is still challenging. Here, a new concept is proposed to design NTE compounds, that is, to increase the flexibility of framework structure by expanding the space in framework structure compounds. Taking the parent compound NaZr 2 (PO 4 ) 3 as a case, a new NTE system A I B II C III (MoO 4 ) 3 (A = Li, Na, K, and Rb; B = Mg and Mn; C = Sc, In, and Lu) is designed. In these compounds, the large volume of MoO 4 tetrahedron is used to replace the small volume of PO 4 tetrahedron in NaZr 2 (PO 4 ) 3 to enhance structural space and NTE performance. Simultaneously, a joint study of temperature-dependent X-ray diffraction, Raman spectroscopy, and the first principles calculation reveals that the NTE in A I B II C III (MoO 4 ) 3 series compounds arise from the coupled oscillation of polyhedral. Large-radius ions are conducive to enhancing the space and softening the framework structure to achieve the enhancement of NTE. The current strategy for designing NTE compounds is expected to be adopted in other compounds to obtain more NTE compounds., (© 2024 Wiley‐VCH GmbH.)

Aqueous electrolytes and related aqueous rechargeable batteries own unique advantage on safety and environmental friendliness, but coupling high energy density Li-metal batteries with aqueous electrolyte still represent challenging and not yet reported. Here, this work makes a breakthrough in "high-voltage aqueous Li-metal batteries" (HVALMBs) by adopting a brilliant hybrid-electrolytes strategy. Concentrated ternary-salts ether-based electrolyte (CTE) acts as the anolyte to ensure the stability and reversibility of Li-metal plating/stripping. Eco-friendly water-in-salt (WiS) electrolyte acts as catholyte to support the healthy operation of high-voltage cathodes. Most importantly, the aqueous catholyte and non-aqueous anolyte are isolated in each independent chamber without any crosstalk. Aqueous catholyte permeation toward Li anode can be completely prohibited without proton-induced corrosion, which is enabled by the introduction of under-liquid dual super-lyophobic membrane-based separator, which can realize the segregation of the most effective immiscible electrolytes with a surface tension difference as small as 6 mJ m -2 . As a result, the aqueous electrolyte can be successfully coupled with Li-metal anode and achieve the fabrication of HVALMBs (hybrid-electrolytes system), which presents long-term cycle stability with a capacity retention of 81.0% after 300 cycles (LiNi 0.8 Mn 0.1 Co 0.1 O 2 || Li (limited) cell) and high energy density (682 Wh kg -1 )., (© 2024 Wiley‐VCH GmbH.)

The safety, low cost, and high power density of aqueous Zn-based devices (AZDs) appeal to large-scale energy storage. Yet, the presence of hydrogen evolution reaction (HER) and chemical corrosion in the AZDs leads to local OH - concentration increasement and the formation of Zn x SO y (OH) z •nH 2 O (ZHS) by-products at the Zn/electrolyte interface, causing instability and irreversibility of the Zn-anodes. Here, a strategy is proposed to regulate OH - by introducing a bio-sourced/renewable polypeptide (ɛ-PL) as a pH regulator in electrolyte. The consumption of OH - species is evaluated through in vitro titration and cell in vivo in situ attenuated total reflection surface-enhanced infrared absorption spectroscopy at a macroscopic and molecular level. The introduction of ɛ-PL is found to significantly suppress the formation of ZHS and associated side reactions, and reduce the local coordinated H 2 O of the Zn 2+ solvation shell, widening electrochemical stable window and suppressing OH - generation during HER. As a result, the inclusion of ɛ-PL improves the cycle time of Zn/Zn symmetrical cells from 15 to 225 h and enhances the cycle time of aqueous Zn- I 2 cells to 1650 h compared to those with pristine electrolytes. This work highlights the potential of kinetical OH - regulation for by-product and dendrite-free AZDs., (© 2024 Wiley‐VCH GmbH.)

Activation of small molecules is considered to be a central concern in the theoretical investigation of environment- and energy-related catalytic conversions. Sub-nanostructured frustrated Lewis pairs (FLPs) have been an emerging research hotspot in recent years due to their advantages in small molecule activation. Although the progress of catalytic applications of FLPs is increasingly reported, the fundamental theories related to the structural formation, site regulation, and catalytic mechanism of FLPs have not yet been fully developed. Given this, it is attempted to demonstrate the underlying theory of FLPs formation, corresponding regulation methods, and its activation mechanism on small molecules using CeO 2 as the representative metal oxide. Specifically, this paper presents three fundamental principles for constructing FLPs on CeO 2 surfaces, and feasible engineering methods for the regulation of FLPs sites are presented. Furthermore, cases where typical small molecules (e.g., hydrogen, carbon dioxide, methane oxygen, etc.) are activated over FLPs are analyzed. Meanwhile, corresponding future challenges for the development of FLPs-centered theory are presented. The insights presented in this paper may contribute to the theories of FLPs, which can potentially provide inspiration for the development of broader environment- and energy-related catalysis involving small molecule activation., (© 2024 Wiley‐VCH GmbH.)

Developing inexpensive and efficient catalysts for biomass hydrogenation or hydrodeoxygenation (HDO) is essential for efficient energy conversion. Transition metal phosphides (TMPs), with the merits of abundant active sites, unique physicochemical properties, tunable component structures, and excellent catalytic activities, are recognized as promising biomass hydrogenation or HDO catalytic materials. Nevertheless, the biomass hydrogenation or HDO catalytic applications of TMPs are still limited by various complexities and inherent performance bottlenecks, and thus their future development and utilization remain to be systematically sorted out and further explored. This review summarizes the current popular strategies for the preparation of TMPs. Subsequently, based on the structural and electronic properties of TMPs, the catalytic activity origins of TMPs in biomass hydrogenation or HDO is elucidated. Additionally, the application of TMPs in efficient biomass hydrogenation or HDO catalysis, as well as highly targeted multiscale strategies to enhance the catalytic performance of TMPs, are comprehensively described. Finally, large-scale amplification synthesis, rational construction of TMP-based catalysts and in-depth study of the catalytic mechanism are also mentioned as challenges and future directions in this research field. Expectedly, this review can provide professional and targeted guidance for the rational design and practical application of TMPs biomass hydrogenation or HDO catalysts., (© 2024 Wiley-VCH GmbH.)

Helicobacter pylori (H. pylori) infection presents increasing challenges to antibiotic therapies in limited penetration through gastric mucus, multi-drug resistance (MDR), biofilm formation, and intestinal microflora dysbiosis. To address these problems, herein, a mucus-penetrating phototherapeutic nanomedicine (RLs@T780TG) against MDR H. pylori infection is engineered. The RLs@T780TG is assembled with a near-infrared photosensitizer T780T-Gu and an anionic component rhamnolipids (RLs) for deep mucus penetration and light-induced anti-H. pylori performances. With optimized suitable size, hydrophilicity and weak negative surface, the RLs@T780TG can effectively penetrate through the gastric mucus layer and target the inflammatory site. Subsequently, under irradiation, the structure of RLs@T780TG is disrupted and facilitates the T780T-Gu releasing to target the H. pylori surface and ablate multi-drug resistant (MDR) H. pylori. In vivo, RLs@T780TG phototherapy exhibits impressive eradication against H. pylori. The gastric lesions are significantly alleviated and intestinal bacteria balance is less affected than antibiotic treatment. Summarily, this work provides a potential nanomedicine design to facilitate in vivo phototherapy in treatment of H. pylori infection., (© 2023 Wiley‐VCH GmbH.)

Metal-organic frameworks (MOFs) have been widely studied as electrocatalysts, and the research strategy to improve their electrocatalytic oxygen evolution reaction (OER) performance is to modify their structure. In this paper, two-dimensional bimetallic MOFs were constructed to improve electrocatalytic OER performance. Using a mild electrochemical method with Ni and Co as metal sources and 4, 4 '-biphenyl dicarboxylic acid (H 2 BPDC) as ligand, two-dimensional NiCo-BPDC was synthesized and then deposited on a carbon cloth electrode. The results show that NiCo-BPDC/CC possessed a low overpotential of 356 mV at a current density of 20 mA cm -2 with a small Tafel slope of 86 mV dec -1 in 1.0 M KOH solution. The two-dimensional NiCo-BPDC exhibits excellent electrocatalytic OER performance because the coordination of Ni and Co in the material and the interaction of the two-dimensional materials provide a large electrochemically active surface area and expose more metal active sites for OER, thus improving the reaction efficiency and indicating NiCo-BPDC as potential OER electrocatalyst., (© 2023 Wiley-VCH GmbH.)

Acting as a passive protective layer, solid-electrolyte interphase (SEI) plays a crucial role in maintaining the stability of the Li-metal anode. Derived from the reductive decomposition of electrolytes (e.g., anion and solvent), the SEI construction presents as an interfacial process accompanied by the dynamic de-solvation process during Li-metal plating. However, typical electrolyte engineering and related SEI modification strategies always ignore the dynamic evolution of electrolyte configuration at the Li/electrolyte interface, which essentially determines the SEI architecture. Herein, by employing advanced electrochemical in situ FT-IR and MRI technologies, we directly visualize the dynamic variations of solvation environments involving Li + -solvent/anion. Remarkably, a weakened Li + -solvent interaction and anion-lean interfacial electrolyte configuration have been synchronously revealed, which is difficult for the fabrication of anion-derived SEI layer. Moreover, as a simple electrochemical regulation strategy, pulse protocol was introduced to effectively restore the interfacial anion concentration, resulting in an enhanced LiF-rich SEI layer and improved Li-metal plating/stripping reversibility., (© 2024 Wiley‐VCH GmbH.)

Improving reaction selectivity is the next target for nanozymes to mimic natural enzymes. Currently, the majority of strategies in this field are exclusively applicable to metal-organic-based or organic-based nanozymes, while limited in regulating metal oxide-based semiconductor nanozymes. Herein, taking semiconductor Co 3 O 4 as an example, a heterojunction strategy to precisely regulate nanozyme selectivity by simultaneously regulating three vital factors including band structure, metal valence state, and oxygen vacancy content is proposed. After introducing MnO 2 to form Z-scheme heterojunctions with Co 3 O 4 nanoparticles, the catalase (CAT)-like and peroxidase (POD)-like activities of Co 3 O 4 can be precisely regulated since the introduction of MnO 2 affects the position of the conduction bands, preserves Co in a higher oxidation state (Co 3+ ), and increases oxygen vacancy content, enabling Co 3 O 4 -MnO 2 exhibit improved CAT-like activity and reduced POD-like activity. This study proposes a strategy for improving reaction selectivity of Co 3 O 4 , which contributes to the development of metal oxide-based semiconductor nanozymes., (© 2024 Wiley‐VCH GmbH.)

Osteomyelitis caused by deep tissue infections is difficult to cure through phototherapy due to the poor penetration depth of the light. Herein, Cu/C/Fe 3 O 4 -COOH nanorod composites (Cu/C/Fe 3 O 4 -COOH) with nanoscale tip convex structures are successfully fabricated as a microwave-responsive smart bacteria-capture-killing vector. Cu/C/Fe 3 O 4 -COOH exhibited excellent magnetic targeting and bacteria-capturing ability due to its magnetism and high selectivity affinity to the amino groups on the surface of Staphylococcus aureus (S. aureus). Under microwave irradiation, Cu/C/Fe 3 O 4 -COOH efficiently treated S. aureus-infected osteomyelitis through the synergistic effects of microwave thermal therapy, microwave dynamic therapy, and copper ion therapy. It is calculated the electric field intensity in various regions of Cu/C/Fe 3 O 4 -COOH under microwave irradiation, demonstrating that it obtained the highest electric field intensity on the surface of copper nanoparticles of Cu/C/Fe 3 O 4 -COOH due to its high-curvature tips and metallic properties. This led to copper nanoparticles attracted more charged particles compared with other areas in Cu/C/Fe 3 O 4 -COOH. These charges are easier to escape from the high curvature surface of Cu/C/Fe 3 O 4 -COOH, and captured by adsorbed oxygen, resulting in the generation of reactive oxygen species. The Cu/C/Fe 3 O 4 -COOH designed in this study is expected to provide insight into the treatment of deep tissue infections under the irradiation of microwave., (© 2023 Wiley‐VCH GmbH.)

The development of effective and stable non-precious catalysts for hydrogenation of ester to diols remains a challenge. Herein, the catalytic hydrogenation of ethyl lactate (EL) to 1,2-propanediol (1,2-PDO) with supported Co catalysts derived from layered double hydroxides (LDHs) is investigated. Catalytic tests reveal that LDH-derived Co catalysts exhibit the best catalytic performance with 98 % of EL conversion and >99 % of 1,2-PDO selectivity at mild conditions, compared with other Co catalysts (supported on Al 2 O 3 , and TiO 2 ) and LDH-derived Cu catalysts. Due to the strong interaction among Co and Al matrix, the main composition is metallic Co 0 and CoO after reduction at 600 °C. Besides, the catalyst shows good recyclability in the liquid phase hydrogenation. The superior catalytic performance can be attributed to the synergistic effect between Co 0 and CoO, in which H 2 molecule is activated on Co 0 and EL is strongly adsorbed on CoO via hydroxyl groups., (© 2024 Wiley‐VCH GmbH.)

Metal nanoclusters with precisely modulated structures at the nanoscale give us the opportunity to synthesize and investigate 1D nanomaterials at the atomic level. Herein, it realizes selective 1D growth of building block nanocluster "Au 13 Cd 2 " into three structurally different nanoclusters: "hand-in-hand" (Au 13 Cd 2 ) 2 O, "head-to-head" Au 25 , and "shoulder-to-shoulder" Au 33 . Detailed studies further reveals the growth mechanism and the growth-related tunable properties. This work provides new hints for the predictable structural transformation of nanoclusters and atomically precise construction of 1D nanomaterials., (© 2023 Wiley-VCH GmbH.)

Developing sacrificial cathode prelithiation technology to compensate for active lithium loss is vital for improving the energy density of lithium-ion battery full-cells. Li 2 CO 3 owns high theoretical specific capacity, superior air stability, but poor conductivity as an insulator, acting as a promising but challenging prelithiation agent candidate. Herein, extracting a trace amount of Co from LiCoO 2 (LCO), a lattice engineering is developed through substituting Li sites with Co and inducing Li defects to obtain a composite structure consisting of (Li 0.906 Co 0.043 ▫ 0.051 ) 2 CO 2.934 and ball milled LiCoO 2 (Co-Li 2 CO 3 @LCO). Notably, both the bandgap and Li─O bond strength have essentially declined in this structure. Benefiting from the synergistic effect of Li defects and bulk phase catalytic regulation of Co, the potential of Li 2 CO 3 deep decomposition significantly decreases from typical >4.7 to ≈4.25 V versus Li/Li + , presenting >600 mAh g -1 compensation capacity. Impressively, coupling 5 wt% Co-Li 2 CO 3 @LCO within NCM-811 cathode, 235 Wh kg -1 pouch-type full-cell is achieved, performing 88% capacity retention after 1000 cycles., (© 2023 Wiley‐VCH GmbH.)

Hollow nanoreactors (HoNRs) have regarded as an attractive catalytic material for photocatalysis due to their exceptional capabilities in enhancing light harvesting, facilitating charge separation and transfer, and optimizing surface reactions. Developing novel HoNRs offers new options to realize controllable catalytic behavior. However, the catalytic mechanism of photocatalysis occurring in HoNRs has not yet been fully revealed. Against this backdrop, this review elaborates on three aspects: 1) the fundamental theoretical insights of HoNRs-driven photocatalytic kinetics; 2) structure-performance relationship of HoNRs to photocatalysis; 3) catalytic advantages of HoNRs in photocatalytic applications. Specifically, the review focuses on the fundamental theories of HoNRs for photocatalysis and their structural advantages for strengthening light scattering, promoting charge separation and transfer, and facilitating surface reaction kinetics, and the relationship between key structural parameters of HoNRs and their photocatalytic performance is in-depth discussed. Also, future prospects and challenges are proposed. It is anticipated that this review paper will pave the way for forthcoming investigations in the realm of HoNRs for photocatalysis., (© 2023 Wiley‐VCH GmbH.)

Inducing cell migration from the edges to the center of a wound, promoting angiogenesis, and controlling bacterial infection are very important for diabetic wound healing. Incorporating growth factors and antibiotics into hydrogels for wound dressing is considered a potential strategy to meet these requirements. However, some present drawbacks greatly slow down their development toward application, such as the short half-life and high price of growth factors, low antibiotic efficiency against drug-resistant bacteria, insufficient ability of hydrogels to promote cell migration, etc. Deferoxamine (DFO) can upregulate the expression of HIF-1α, thus stimulating the secretion of angiogenesis-related endogenous growth factors. Copper sulfide (CuS) nanoparticles possess excellent antibacterial performance combined with photothermal therapy (PTT). Herein, DFO and CuS nanoparticles are incorporated into a biomimetic hydrogel, which mimics the structure and function of the extracellular matrix (ECM), abbreviated as DFO/CuS-ECMgel. This biomimetic hydrogel is expected to be able to promote cell adhesion and migration, be degraded by cell-secreted matrix metalloproteinases (MMPs), and then release DFO and CuS nanoparticles at the wound site to exert their therapeutic effects. As a result, the three crucial requirements for diabetic wound healing, "beneficial for cell adhesion and migration, promoting angiogenesis, effectively killing drug-resistant bacteria," can be achieved simultaneously., (© 2023 Wiley‐VCH GmbH.)

Diabetic nephropathy (DN) is a serious microvascular complication of diabetes. Ferroptosis, a new form of cell death, plays a crucial role in the pathogenesis of DN. Renal tubular injury triggered by ferroptosis might be essential in this process. Numerous studies demonstrate that the vitamin D receptor (VDR) exerts beneficial effects by suppressing ferroptosis. However, the underlying mechanism has not been fully elucidated. Thus, they verified the nephroprotective effect of VDR activation and explored the mechanism by which VDR activation suppressed ferroptosis in db/db mice and high glucose-cultured proximal tubular epithelial cells (PTECs). Paricalcitol (PAR) is a VDR agonist that can mitigate kidney injury and prevent renal dysfunction. PAR treatment could inhibit ferroptosis of PTECs through decreasing iron content, increasing glutathione (GSH) levels, reducing malondialdehyde (MDA) generation, decreasing the expression of positive ferroptosis mediator transferrin receptor 1 (TFR-1), and enhancing the expression of negative ferroptosis mediators including ferritin heavy chain (FTH-1), glutathione peroxidase 4 (GPX4), and cystine/glutamate antiporter solute carrier family 7 member 11 (SLC7A11). Mechanistically, VDR activation upregulated the NFE2-related factor 2/heme oxygenase-1 (Nrf2/HO-1) signaling pathway to suppress ferroptosis in PTECs. These findings suggested that VDR activation inhibited ferroptosis of PTECs in DN via modulating the Nrf2/HO-1 signaling pathway., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Detecting exosomal markers using laser desorption/ionization time-of-flight mass spectrometry (LDI-TOF MS) is a novel approach for examining liquid biopsies of non-small cell lung cancer (NSCLC) samples. However, LDI-TOF MS is limited by low sensitivity and poor reproducibility when analyzing intact proteins directly. In this report, gold nanoparticles/cellulose nanocrystals (AuNPs/CNC) is introduced as the matrix for direct analysis of intact proteins in NSCLC serum exosomes. AuNPs/CNC with "dual dispersion" effects dispersed and stabilized AuNPs and improved ion inhibition effects caused by protein aggregation. These features increased the signal-to-noise ratio of [M+H] + peaks by two orders of magnitude and lowered the detection limit of intact proteins to 0.01 mg mL -1 . The coefficient of variation with or without AuNPs/CNC is measured as 10.2% and 32.5%, respectively. The excellent reproducibility yielded a linear relationship (y = 15.41x - 7.983, R 2  = 0.989) over the protein concentration range of 0.01 to 20 mg mL -1 . Finally, AuNPs/CNC-assisted LDI-TOF MS provides clinically relevant fingerprint information of exosomal proteins in NSCLC serum, and characteristic proteins S100 calcium-binding protein A10, Urokinase plasminogen activator surface receptor, Plasma protease C1 inhibitor, Tyrosine-protein kinase Fgr and Mannose-binding lectin associated serine protease 2 represented excellent predictive biomarkers of NSCLC risk., (© 2024 The Authors. Advanced Science published by Wiley‐VCH GmbH.)

Electrolyte engineering is a fascinating choice to improve the performance of Li-rich layered oxide cathodes (LRLO) for high-energy lithium-ion batteries. However, many existing electrolyte designs and adjustment principles tend to overlook the unique challenges posed by LRLO, particularly the nucleophilic attack. Here, we introduce an electrolyte modification by locally replacing carbonate solvents in traditional electrolytes with a fluoro-ether. By benefit of the decomposition of fluoro-ether under nucleophilic O-related attacks, which delivers an excellent passivation layer with LiF and polymers, possessing rigidity and flexibility on the LRLO surface. More importantly, the fluoro-ether acts as "sutures", ensuring the integrity and stability of both interfacial and bulk structures, which contributed to suppressing severe polarization and enhancing the cycling capacity retention from 39 % to 78 % after 300 cycles for the 4.8 V-class LRLO. This key electrolyte strategy with comprehensive analysis, provides new insights into addressing nucleophilic challenge for high-energy anionic redox related cathode systems., (© 2023 Wiley-VCH GmbH.)

Compensating the irreversible loss of limited active lithium (Li) is essentially important for improving the energy-density and cycle-life of practical Li-ion battery full-cell, especially after employing high-capacity but low initial coulombic efficiency anode candidates. Introducing prelithiation agent can provide additional Li source for such compensation. Herein, we precisely implant trace Co (extracted from transition metal oxide) into the Li site of Li 2 O, obtaining (Li 0.66 Co 0.11 □ 0.23 ) 2 O (CLO) cathode prelithiation agent. The synergistic formation of Li vacancies and Co-derived catalysis efficiently enhance the inherent conductivity and weaken the Li-O interaction of Li 2 O, which facilitates its anionic oxidation to peroxo/superoxo species and gaseous O 2 , achieving 1642.7 mAh/g ~Li2O prelithiation capacity (≈980 mAh/g for prelithiation agent). Coupled 6.5 wt % CLO-based prelithiation agent with LiCoO 2 cathode, substantial additional Li source stored within CLO is efficiently released to compensate the Li consumption on the SiO/C anode, achieving 270 Wh/kg pouch-type full-cell with 92 % capacity retention after 1000 cycles., (© 2023 Wiley-VCH GmbH.)

With the extensive use of fossil fuels, the ever-increasing greenhouse gas of mainly carbon dioxide emissions will result in global climate change. It is of utmost importance to reduce carbon dioxide emissions and its utilization. Li-CO 2 batteries can convert carbon dioxide into electrochemical energy. However, developing efficient catalysts for the decomposition of Li 2 CO 3 as the discharge product represents a challenge in Li-CO 2 batteries. Herein, we demonstrate a carbon foam composite with growing carbon nanotube by using cobalt as the catalyst, showing the ability to enhance the decomposition rate of Li 2 CO 3 , and thus improve the electrochemical performance of Li-CO 2 batteries. Benefiting from its abundant pore structure and catalytic sites, the as-assembled Li-CO 2 battery exhibits a desirable overpotential of 1.67 V after 50 cycles. Moreover, the overpotentials are 1.05 and 2.38 V at current densities of 0.02 and 0.20 mA cm -2 , respectively. These results provide a new avenue for the development of efficient catalysts for Li-CO 2 batteries., (© 2023 Wiley-VCH GmbH.)

Although proton exchange membrane water electrolyzers (PEMWE) are considered as a promising technique for green hydrogen production, it remains crucial to develop intrinsically effective oxygen evolution reaction (OER) electrocatalysts with high activity and durability. Here, a flexible self-supporting electrode with nanoporous Ir/Ta2O5 electroactive surface is reported for acidic OER via dealloying IrTaCoB metallic glass ribbons. The catalyst exhibits excellent electrocatalytic OER performance with an overpotential of 218 mV for a current density of 10 mA cm -2 and a small Tafel slope of 46.1 mV dec -1 in acidic media, superior to most electrocatalysts. More impressively, the assembled PEMWE with nanoporous Ir/Ta 2 O 5 as an anode shows exceptional performance of electrocatalytic hydrogen production and can operate steadily for 260 h at 100 mA cm -2 . In situ spectroscopy characterizations and density functional theory calculations reveal that the modest adsorption of OOH* intermediates to active Ir sites lower the OER energy barrier, while the electron donation behavior of Ta 2 O 5 to stabilize the high-valence states of Ir during the OER process extended catalyst's durability., (© 2023 Wiley-VCH GmbH.)

Raising the charging cut-off voltage of layered oxide cathodes can improve their energy density. However, it inevitably introduces instabilities regarding both bulk structure and surface/interface. Herein, exploiting the unique characteristics of high-valence Nb 5+ element, a synchronous surface-to-bulk-modified LiCoO 2 featuring Li 3 NbO 4 surface coating layer, Nb-doped bulk, and the desired concentration gradient architecture through one-step calcination is achieved. Such a multifunctional structure facilitates the construction of high-quality cathode/electrolyte interface, enhances Li + diffusion, and restrains lattice-O loss, Co migration, and associated layer-to-spinel phase distortion. Therefore, a stable operation of Nb-modified LiCoO 2 half-cell is achieved at 4.6 V (90.9% capacity retention after 200 cycles). Long-life 250 Wh kg -1 and 4.7 V-class 550 Wh kg -1 pouch cells assembled with graphite and thin Li anodes are harvested (both beyond 87% after 1600 and 200 cycles). This multifunctional one-step modification strategy establishes a technological paradigm to pave the way for high-energy density and long-life lithium-ion cathode materials., (© 2023 Wiley-VCH GmbH.)

Nowadays, the field of biomass conversion is gradually moving towards an encouraging stage. The preparation of nitrogen-containing chemicals using various biomass resources instead of fossil resources do not only reduce carbon emissions, but also diversify the products of biomass conversion, thus increasing the economic competitiveness of biomass refining systems. Levulinic acid (LA) can be used as a promising intermediate in biomass conversion for further synthesis of pyrrolidone via reductive amination. However, there are still many critical issues to be solved. Particularly, the specific effects of catalysts on the performance of LA reductive amination have not been sufficiently revealed, and the potential impacts of key conditional factors have not been clearly elucidated. In view of this, this review attempts to provide theoretical insights through an in-depth interpretation of the above key issues. The contribution of catalysts to the reductive amination of LA as well as the catalyst structural preferences for improving catalytic performance are discussed. In addition, the role of key conditional factors is discussed. The insights presented in this review will contribute to the design of catalyst nanostructures and the rational configuration of green reaction conditions, which may provide inspiration to facilitate the nitrogen-related transformation of more biomass platform molecules., (© 2023 Wiley-VCH GmbH.)

Nanoreactors, as a new class of materials with highly enriched and ordered pore channel structures, can achieve special catalytic effects by precisely identifying and controlling the molecular diffusion behavior within the ordered pore channel system. Nanoreactors-driven molecular diffusion within the ordered pore channels can be highly dependent on the local microenvironment in the nanoreactors' pore channel system. Although the diffusion process of molecules within the ordered pore channels of nanoreactors is crucial for the regulation of catalytic behaviors, it has not yet been as clearly elucidated as it deserves to be in this study. In this review, fundamental theory and measurement techniques for molecular diffusion in the pore channel system of nanoreactors are presented, structural regulation strategies of pore channel parameters for controlling molecular diffusion are discussed, and the effects of molecular diffusion in the pore channel system on catalytic reactivity and selectivity are further analyzed. This article attempts to further develop the underlying theory of molecular diffusion within the theoretical framework of nanoreactor-driven catalysis, and the proposed perspectives may contribute to the rational design of advanced catalytic materials and the precise control of complex catalytic kinetics., (© 2023 Wiley-VCH GmbH.)

Under diabetic conditions, blood glucose fluctuations and exacerbated immunopathological inflammatory environments pose significant challenges to periosteal regenerative repair strategies. Responsive immune regulation in damaged tissues is critical for the immune microenvironment, osteogenesis, and angiogenesis stabilization. Considering the high-glucose microenvironment of such acute injury sites, a functional glucose-responsive immunomodulation-assisted periosteal regeneration composite material-PLA（Polylactic Acid）/COLI(Collagen I）/Lipo(Liposome）-APY29 (PCLA)-is constructed. Aside from stimulating osteogenic differentiation, owing to the presence of surface self-assembled type I collagen in the scaffolds, PCLA can directly respond to focal area high-glucose microenvironments. The PCLA scaffolds trigger the release of APY29-loaded liposomes, shifting the macrophages toward the M2 phenotype, inhibiting the release of inflammatory cytokines, improving the bone immune microenvironment, and promoting osteogenic differentiation and angiogenesis. Bioinformatics analyses show that PCLA enhances bone repair by inhibiting the inflammatory signal pathway regulating the polarization direction and promoting osteogenic and angiogenic gene expression. In the calvarial periosteal defect model of diabetic rats, PCLA scaffolds induce M2 macrophage polarization and improve the inflammatory microenvironment, significantly accelerating periosteal repair. Overall, the PCLA scaffold material regulates immunity in fluctuating high-glucose inflammatory microenvironments, achieves relatively stable and favorable osteogenic microenvironments, and facilitates the effective design of functionalized biomaterials for bone regeneration therapy in patients with diabetes., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Electrochemical CO 2 reduction reaction (CO 2 RR) offers a promising approach to close the anthropogenic carbon cycle and store intermittent renewable energy in fuels or chemicals. On the path to commercializing this technology, achieving the long-term operation stability is a central requirement but still confronts challenges. This motivates to organize the present review to systematically discuss the stability issue of CO 2 RR. This review starts from the fundamental understanding on the destabilization mechanisms of CO 2 RR, with focus on the degradation of electrocatalyst and change of reaction microenvironment during continuous electrolysis. Subsequently, recent efforts on catalyst design to stabilize the active sites are summarized, where increasing atomic binding strength to resist surface reconstruction is highlighted. Next, the optimization of electrolysis system to enhance the operation stability by maintaining reaction microenvironment especially mitigating flooding and carbonate problems is demonstrated. The manipulation on operation conditions also enables to prolong CO 2 RR lifespan through recovering catalytically active sites and mass transport process. This review finally ends up by indicating the challenges and future opportunities., (© 2023 Wiley-VCH GmbH.)

Both LiFePO 4 (LFP) and NaFePO 4 (NFP) are phosphate polyanion-type cathode materials, which have received much attention due to their low cost and high theoretical capacity. Substitution of manganese (Mn) elements for LFP/NFP materials can improve the electrochemical properties, but the connection between local structural changes and electrochemical behaviors after Mn substitution is still not clear. This study not only achieves improvements in energy density of LFP and cyclic stability of NFP through Mn substitution, but also provides an in-depth analysis of the structural evolutions induced by the substitution. Among them, the substitution of Mn enables LiFe 0.5 Mn 0.5 PO 4 to achieve a high energy density of 535.3 Wh kg -1 , while NaFe 0.7 Mn 0.3 PO 4 exhibits outstanding cyclability with 89.6% capacity retention after 250 cycles. Specifically, Mn substitution broadens the ion-transport channels, improving the ion diffusion coefficient. Moreover, LiFe 0.5 Mn 0.5 PO 4 maintains a more stable single-phase transition during the charge/discharge process. The transition of NaFe 0.7 Mn 0.3 PO 4 to the amorphous phase is avoided, which can maintain structural stability and achieve better electrochemical performance. With systematic analysis, this research provides valuable guidance for the subsequent design of high-performance polyanion-type cathodes., (© 2023 Wiley-VCH GmbH.)

1,3-Bis(boronic) esters can be readily synthesized from alkylBpin precursors. Selective transformations of these compounds hold the potential for late-stage functionalization of the remaining C-B bond, leading to a diverse array of molecules. Currently, there are no strategies available to address the reactivity and, more importantly, the controllable regiodivergent functionalization of 1,3-bis(boronic) esters. In this study, we have achieved controllable regiodivergent alkynylation of these molecules. The regioselectivity has been clarified based on the unique chelation patterns observed with different organometallic reagents. Remarkably, this methodology effectively addresses the low reactivity of 1,3-bis(boronic) esters and bridges the gap in radical chemistry, which typically yields only the classical products formed via stable radical intermediates. Furthermore, the compounds synthesized through this approach serve as potent building blocks for creating molecular diversity., (© 2023 Wiley-VCH GmbH.)

Non-traditional fluorescent polymers have attracted significant attention for their excellent biocompatibility and diverse applications. However, designing and preparing non-traditional fluorescent polymers that simultaneously possess long emission wavelengths and long fluorescence lifetime remains challenging. In this study, a series of novel hyperbranched polyborosiloxanes (P1-P4) were synthesized. As the electron density increases on the monomer diol, the optimal emission wavelengths of the P1-P4 polymers gradually red-shift to 510, 570, 575, and 640 nm, respectively. In particular, P4 not only exhibits red emission but also demonstrates delayed fluorescence with a lifetime of 9.73 μs and the lowest critical cluster concentration (1.76 mg/mL). The experimental results and theoretical calculations revealed that the synergistic effect of dual heteroatom-induced electron delocalization and through-space O⋅⋅⋅O and O⋅⋅⋅N interaction was the key factor contributing to the red-light emission with delayed fluorescence. Additionally, these polymers showed excellent potential in dual-information encryption. This study provides a universal design strategy for the development of unconventional fluorescent polymers with both delayed fluorescence and long-wavelength emission., (© 2023 Wiley-VCH GmbH.)

Nanochannel technology has emerged as a powerful tool for label-free and highly sensitive detection of protein folding/unfolding status. However, utilizing the inner walls of a nanochannel array may cause multiple events even for proteins with the same conformation, posing challenges for accurate identification. Herein, we present a platform to detect unfolded proteins through electrical and optical signals using nanochannel arrays with outer-surface probes. The detection principle relies on the specific binding between the maleimide groups in outer-surface probes and the protein cysteine thiols that induce changes in the ionic current and fluorescence intensity responses of the nanochannel array. By taking advantage of this mechanism, the platform has the ability to differentiate folded and unfolded state of proteins based on the exposure of a single cysteine thiol group. The integration of these two signals enhances the reliability and sensitivity of the identification of unfolded protein states and enables the distinction between normal cells and Huntington's disease mutant cells. This study provides an effective approach for the precise analysis of proteins with distinct conformations and holds promise for facilitating the diagnoses of protein conformation-related diseases., (© 2023 Wiley-VCH GmbH.)

Hard carbon anodes with all-plateau capacities below 0.1 V are prerequisites to achieve high-energy-density sodium-ion storage, which holds promise for future sustainable energy technologies. However, challenges in removing defects and improving the insertion of sodium ions head off the development of hard carbon to achieve this goal. Herein, a highly cross-linked topological graphitized carbon using biomass corn cobs through a two-step rapid thermal-annealing strategy is reported. The topological graphitized carbon constructed with long-range graphene nanoribbons and cavities/tunnels provides a multidirectional insertion of sodium ions whilst eliminating defects to absorb sodium ions at the high voltage region. Evidence from advanced techniques including in situ XRD, in situ Raman, and in situ/ex situ transmission electron microscopy (TEM) indicates that the sodium ions' insertion and Na cluster formation occurred between curved topological graphite layers and in the topological cavity of adjacent graphite band entanglements. The reported topological insertion mechanism enables outstanding battery performance with a single full low-voltage plateau capacity of 290 mAh g -1 , which is almost 97% of the total capacity., (© 2023 Wiley-VCH GmbH.)

Rechargeable sodium ion batteries (SIBs) have promising applications in large-scale energy storage systems. Iron-based Prussian blue analogs (PBAs) are considered as potential cathodes owing to their rigid open framework, low-cost, and simple synthesis. However, it is still a challenge to increase the sodium content in the structure of PBAs and thus suppress the generation of defects in the structure. Herein, a series of isostructural PBAs samples are synthesized and the isostructural evolution of PBAs from cubic to monoclinic after modifying the conditions is witnessed. Accompanied by, the increased sodium content and crystallinity are discovered in PBAs structure. The as-obtained sodium iron hexacyanoferrate (Na 1.75 Fe[Fe(CN) 6 ] 0.9743 ·2.76H 2 O) exhibits high charge capacity of 150 mAh g -1 at 0.1 C (17 mA g -1 ) and excellent rate performance (74 mAh g -1 at 50 C (8500 mA g -1 )). Moreover, their highly reversible Na + ions intercalation/de-intercalation mechanism is verified by in situ Raman and Powder X-ray diffraction (PXRD) techniques. More importantly, the Na 1.75 Fe[Fe(CN) 6 ] 0.9743 ·2.76H 2 O sample can be directly assembled in a full cell with hard carbon (HC) anode and shows excellent electrochemical performances. Finally, the relationship between PBAs structure and electrochemical performance is summarized and prospected., (© 2023 Wiley-VCH GmbH.)

Opportunistic infections caused by Pseudomonas aeruginosa (P. aeruginosa) are particularly difficult to treat due to the altered membrane permeability and inherent resistance to conventional antibiotics. Here, a cationic glycomimetics is designed and synthesized with aggregation-induced emission (AIE) characteristics namely TPyGal, which self-assembles into the spherical aggregates with galactosylated surface. TPyGal aggregates can effectively cluster P. aeruginosa through multivalent carbohydrate-lectin interactions and auxiliary electrostatic interactions and subsequently trigger membrane-intercalating, which results in efficient photodynamic eradication of P. aeruginosa under white light irradiation by in situ singlet oxygen ( 1 O 2 ) burst to disrupt bacterial membrane. Furthermore, the results demonstrate that TPyGal aggregates promote the healing of infected wounds, indicating the potential for clinical treatment of P. aeruginosa infections., (© 2023 Wiley-VCH GmbH.)

Supramolecular assemblies made by the self-assembly of peptides are finding an increasing number of applications in various fields. While the early exploration of peptide assemblies centered on tissue engineering or regenerative medicine, the recent development has shown that peptide assemblies can act as supramolecular medicine for cancer therapy. This review covers the progress of applying peptide assemblies for cancer therapy, with the emphasis on the works appeared over the last five years. We start with the introduction of a few seminal works on peptide assemblies, then discuss the combination of peptide assemblies with anticancer drugs. Next, we highlight the use of enzyme-controlled transformation or shapeshifting of peptide assemblies for inhibiting cancer cells and tumors. After that, we provide the outlook for this exciting field that promises new kind of therapeutics for cancer therapy., (© 2023 The Authors. ChemMedChem published by Wiley-VCH GmbH.)

Prussian blue analogs (PBAs) have attracted wide interest as a class of ideal cathodes for rechargeable sodium-ion batteries due to their low cost, high theoretical capacity, and facile synthesis. Herein, a series of highly crystalline Fe-based PBAs (FeHCF) cubes, where HCF stands for the hexacyanoferrate, is synthesized via a one-step pyrophosphate-assisted co-precipitation method. By applying this proposed facile crystallization-controlled method to slow down the crystallization process and suppress the defect content of the crystal framework of the PBAs, the as-prepared materials demonstrate high crystallization and a sodium-rich induced rhombohedral phase. As a result, the as prepared FeHCF can deliver a high specific capacity of up to 152.0 mA h g -1 (achieving ≈90% of its theoretical value) and an excellent rate capability with a high-capacity retention ratio of 88% at 10 C, which makes it one of the most competitive candidates among the cathodes reported regarding both capacity and rate performance. A highly reversible three-phase-transition sodium-ion storage mechanism has been revealed via multiple in situ techniques. Furthermore, the full cells fabricated with as-prepared cathode and commercial hard carbon anode exhibit excellent compatibility which shows great prospects for application in the large-scale energy storage systems., (© 2023 Wiley-VCH GmbH.)

The repair of large-diameter corneal stroma defects is a major clinical problem. Although some studies have attempted to use hydrogels to repair corneal damage, most of these hydrogels can only be used for focal stromal defects that are ≤3.5 mm in diameter due to poor hydrogel adhesion. Here, a photocurable adhesive hydrogel that mimics the extracellular matrix (ECM) with regard to composition for repairing 6 mm-diameter corneal stromal defects in rabbits is investigated. This ECM-like adhesive can be rapidly cured after light exposure, with high light transmittance and good mechanical properties. More importantly, this hydrogel maintains the viability and adhesion of cornea-derived cells and promotes their migration in vitro in 2D and 3D culture environments. Proteomics analysis confirms that the hydrogel promotes cell proliferation and ECM synthesis. Furthermore, in rabbit corneal stromal defect repair experiments, it is proven by histological and proteomic analysis that this hydrogel can effectively promote corneal stroma repair, reduce scar formation, and increase corneal stromal-neural regeneration at the six months follow-up. This work demonstrates the great application of ECM-like adhesive hydrogels for the regeneration of large-diameter corneal defects., (© 2023 Wiley-VCH GmbH.)