Search

Two configurations of molecularly imprinted bis-aniline-bridged Au nanoparticles (NPs) for the specific binding of the electron acceptor N,N'-dimethyl-4,4'-bipyridinium (MV(2+) ) and for the photosensitizer Zn(II)-protoporphyrin IX (Zn(II)-PP-IX) are assembled on electrodes, and the photoelectrochemical features of the two configurations are discussed. Configuration I includes the MV(2+) -imprinted Au NPs matrix as a base layer, on which the Zn(II)-PP-IX-imprinted Au NPs layer is deposited, while configuration II consists of a bilayer corresponding to the reversed imprinting order. Irradiation of the two electrodes in the presence of a benzoquinone/benzohydroquinone redox probe yields photocurrents of unique features: (i) Whereas configuration I yields an anodic photocurrent, the photocurrent generated by configuration II is cathodic. (ii) The photocurrents obtained upon irradiation of the imprinted electrodes are substantially higher as compared to the nonimprinted surfaces. The high photocurrents generated by the imprinted Au NPs-modified electrodes are attributed to the effective loading of the imprinted matrices with the MV(2+) and Zn(II)-PP-IX units and to the effective charge separation proceeding in the systems. The directional anodic/cathodic photocurrents are rationalized in terms of vectorial electron transfer processes dictated by the imprinting order and by the redox potentials of the photosensitizer/electron acceptor units associated with the imprinted sites in the two configurations., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Layered metal nanoparticle (NP) assemblies provide highly porous and conductive composites of unique electrical and optical (plasmonic) properties. Two methods to construct layered metal NP matrices are described, and these include the layer-by-layer deposition of NPs, or the electropolymerization of monolayer-functionalized NPs, specifically thioaniline-modified metal NPs. The layered NP composites are used as sensing matrices through the use of electrochemistry or surface plasmon resonance (SPR) as transduction signals. The crosslinking of the metal NP composites with molecular receptors, or the imprinting of molecular recognition sites into the electropolymerized NP matrices lead to selective and chiroselective sensing interfaces. Furthermore, the electrosynthesis of redox-active, imprinted, bis-aniline bridged Au NP composites yields electrochemically triggered "sponges" for the switchable uptake and release of electron-acceptor substrates, and results in conductive surfaces of electrochemically controlled wettability. Also, photosensitizer-relay-crosslinked Au NP composites, or electrochemically polymerized layered semiconductor quantum dot/metal NP matrices on electrodes, are demonstrated as functional nanostructures for photoelectrochemical applications., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Layered assemblies of photosystem I, PSI, and/or photosystem II, PSII, on ITO electrodes are constructed using a layer-by-layer deposition process, where poly N,N'-dibenzyl-4,4'-bipyridinium (poly-benzyl viologen, PBV(2+) ) is used as an inter-protein "glue". While the layered assembly of PSI generates an anodic photocurrent only in the presence of a sacrificial electron donor system, such as dichlorophenol indophenol (DCPIP)/ascorbate, the PSII-modified electrode leads, upon irradiation, to the formation of an anodic photocurrent (while evolving oxygen), in the absence of any sacrificial component. The photocurrent is generated by transferring the electrons from the PSII units to the PBV(2+) redox polymer. The charge-separated species allow, then, the injection of the electrons to the electrode, with the concomitant evolution of O2 . A layered assembly, consisting of a PSI layer attached to a layer of PSII by the redox polymer PBV(2+) , leads to an anodic photocurrent that is 2-fold higher, as compared to the anodic photocurrent generated by a PSII-modified electrode. This observation is attributed to an enhanced charge separation in the two-photosystem assembly. By the further nano-engineering of the two photosystems on the electrode using two different redox polymers, vectorial electron transfer to the electrode is demonstrated, resulting in a ca. 6-fold enhancement in the photocurrent. The reversed bi-layer assembly, consisting of a PSII layer linked to a layer of PSI by the PBV(2+) redox polymer, yields, upon irradiation, an inefficient cathodic current. This observation is attributed to a mixture of photoinduced electron transfer reactions of opposing effects on the photocurrent directions in the two-photosystem assembly., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The thermosensitive poly(N-isopropylacrylamide) (p-NIPAM) is electropolymerized onto Au surfaces. The incorporation of the photoisomerizable N-carboxyethyl nitrospiropyran compound into p-NIPAM allows the reversible photochemical control of the gel-to-solid phase-transition temperatures of the polymer. Whereas the gel-to-solid phase-transition temperature of the nitrospiropyran-modified p-NIPAM is 33±2 °C, the phase-transition temperature of the nitromerocyanine-functionalized p-NIPAM matrix corresponds to 38±1 °C. Upon the incorporation of Pt nanoparticles (NPs) into the photochemically controlled p-NIPAM, a hybrid photoswitchable electrocatalytic matrix is formed. At a fixed temperature corresponding to 38 °C, the effective electrocatalytic reduction of H(2)O(2), or the oxidation of ascorbic acid, proceeded in the presence of the nitromerocyanine-functionalized p-NIPAM, yet these electrocatalytic transformations were inhibited in the presence of the nitrospiropyran-modified p-NIPAM., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Thiolated nucleic acid hairpin nanostructures that include in their stem region a "caged" G-quadruplex sequence, and in their single-stranded loop region oligonucleotide recognition sequences for DNA, adenosine monophosphate (AMP), or Hg(2+) ions were linked to bare Au surfaces or to Au nanoparticles (NPs) linked to Au surfaces. The opening of the hairpin nanostructures associated with the bare Au surface by the complementary target DNA, AMP substrate, or Hg(2+) ions, in the presence of hemin, led to the self-assembly of hemin/G-quadruplexes on the surface. The resulting dielectric changes on the surface exhibited shifts in the surface plasmon resonance (SPR) spectra, thus providing a readout signal for the recognition events. A similar opening of the hairpin nanostructures, immobilized on the Au NPs associated with the Au surface, by the DNA, AMP, or Hg(2+) led to an ultrasensitive SPR-amplified detection of the respective analytes. The amplification originated from the coupling between the localized surface plasmon associated with the NPs and the surface plasmon wave, an effect that cooperatively amplifies the SPR shifts that result from the formation of the hemin/G-quadruplexes. The different sensing platforms reveal impressive sensitivities and selectivities toward the target analytes., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Au nanoparticles (NPs) functionalized with thioaniline and cysteine are used to assemble bis-aniline-bridged Au-NP composites on Au surfaces using an electropolymerization process. During the polymerization of the functionalized Au NPs in the presence of different amino acids, for example, L-glutamic acid, L-aspartic acid, L-histidine, and L-phenylalanine, zwitterionic interactions between the amino acids and the cysteine units linked to the particles lead to the formation of molecularly imprinted sites in the electropolymerized Au-NP composites. Following the elimination of the template amino acid molecules, the electropolymerized matrices reveal selective recognition and binding capabilities toward the imprinted amino acid. Furthermore, by imprinting of L-glutamic or D-glutamic acids, chiroselective imprinted sites are generated in the Au-NP composites. The binding of amino acids to the imprinted recognition sites was followed by surface plasmon resonance spectroscopy. The refractive index changes occurring upon the binding of the amino acids to the imprinted sites are amplified by the coupling between the localized plasmon associated with the Au NPs and the surface plasmon wave.

Sweet sensor: A bis-aniline-cross-linked Au nanoparticles (NPs)/glucose oxidase composite has been electropolymerized on a Au electrode (see picture). The integrated Au NPs/enzyme electrode provides an effective matrix for making electrical contact with the enzyme, and this yields a specific amperometric glucose biosensor.Electropolymerizable glucose oxidase (GOx) was synthesized by the tethering of thioaniline units to the protein. The electropolymerization of the thioaniline-modified GOx in the presence of thioaniline-functionalized Au nanoparticles (NPs) yielded a three-dimensional bis-aniline-cross-linked Au NPs/GOx network. The bis-aniline bridging units are redox active and mediate the electron transfer between the enzyme redox sites and the electrode, and the Au NPs provide the three-dimensional conductivity for transporting the electrons to the electrode. The covalently linked GOx displays an effective electrical contact with the electrode (turnover rate of ca. 500 s(-1)), which results in a sensitive and selective glucose-sensing electrode. The preparation of the electrode by means of electropolymerization, and the bioelectrocatalytic features of the electrode, suggest its feasibility as a miniaturized electrode with a sensing matrix and as an implantable glucose sensor in future applications.