Search

A quantitative method for fluoride determination using RP HPLC and UV detection was developed. The method is based on the reaction of fluoride with triphenylhydroxysilane in highly acidic conditions and extraction of the reaction product into n-heptane. Chromatographic conditions as well as the derivatization parameters were optimized. LOQ for fluoride ion was evaluated as 0.25 μM (4.75 ppb) and linear range of response up to 75 μM (1.42 ppm) was obtained. The method was developed as a part of a procedure designed for the determination of total organic fluorine in natural waters, using SPE on a carbon sorbent and sodium biphenyl reagent for the defluorination reaction. LOD for a model compound, perfluorooctanoic acid, calculated for the complete procedure with 2000-fold preconcentration, is 20 ppt (n=4). Initial results show feasibility of total organic fluorine determination for environmental purposes.

LC with MS detection was optimized for sensitive and selective analysis of main classes of natural dyes used in ancient times for dyeing textiles -- red anthraquinoids, yellow flavonoids, and known degradation products of flavonols -- hydroxybenzoic acids. Fragmentation patterns of both negative and positive molecular ions for the above mentioned compounds were investigated. Three acquisition modes of MS analysis: scanning, SIM, and multiple reaction monitoring (MRM) in both positive and negative ion modes were optimized and compared with each other and with the UV-Vis diode-array detection. Even though in the applied chromatographic system formic acid was used in the mobile phase, SIM in the negative ion mode was the most selective and sensitive detection for all the investigated compounds when both mixtures of standards and analysis of extracts from archeological samples were concerned, with one exception -- alizarin, for which MS detection in positive ion mode was more sensitive. Detection limits obtained with MS detection for all investigated compounds except quinizarin were lower than the ones obtained with the diode-array UV-Vis detection, making MS detection the most suitable tool for the analysis of natural dyes and their degradation products in extracts from archeological samples.

A capillary electrophoretic method with UV detection for separation and quantitation of perfluorocarboxylic acids (PFCAs) from C6-PFCA to C12-PFCA has been developed. The optimization of measurement conditions included the choice of the most appropriate type and concentration of buffer in the background electrolyte (BGE), as well as the type and the content of an organic modifier. The optimal separation of investigated PFCAs was achieved with 50 mM phosphate buffer and 40% isopropanol in the BGE using direct UV detection. The optimum wavelength for direct UV detection was optimized at 190 nm. For indirect detection, several chromophores were studied. Five mM 3,5-Dinitrobenzoic acid (3,5-DNBA) in 20 mM phosphate buffer BGE and indirect UV detection at 280 nm gave the optimal detection and separation performance for the investigated PFCAs. The possibility of on-line preconcentration of solutes by stacking has been examined for indirect detection. The detection limits (LODs) determined for direct UV detection ranged from 2 microg/mL for C6-PFCA to 33 microg/mL for C12-PFCA. The LODs obtained for indirect UV detection were comparable to those obtained for direct UV detection.