Search

Graphite is a commonly used raw material across many industries and the demand for high-quality graphite has been increasing in recent years, especially as a primary component for lithium-ion batteries. However, graphite production is currently limited by production shortages, uneven geographical distribution, and significant environmental impacts incurred from conventional processing. Here, an efficient method of synthesizing biomass-derived graphite from biochar is presented as a sustainable alternative to natural and synthetic graphite. The resulting bio-graphite equals or exceeds quantitative quality metrics of spheroidized natural graphite, achieving a Raman I D /I G ratio of 0.051 and crystallite size parallel to the graphene layers (L a ) of 2.08 µm. This bio-graphite is directly applied as a raw input to liquid-phase exfoliation of graphene for the scalable production of conductive inks. The spin-coated films from the bio-graphene ink exhibit the highest conductivity among all biomass-derived graphene or carbon materials, reaching 3.58 ± 0.16 × 10 4 S m -1 . Life cycle assessment demonstrates that this bio-graphite requires less fossil fuel and produces reduced greenhouse gas emissions compared to incumbent methods for natural, synthesized, and other bio-derived graphitic materials. This work thus offers a sustainable, locally adaptable solution for producing state-of-the-art graphite that is suitable for bio-graphene and other high-value products., (© 2024 The Author(s). Small published by Wiley‐VCH GmbH.)

In pursuit of the highest possible energy density, researchers shift their focus to the ultimate anode material, lithium metal (Li 0 ), and high-capacity cathode materials with high nickel content (Ni > 80%). The combination of these aggressive electrodes presents unprecedented challenges to the electrolyte. Here, we report a hybrid electrolyte consisting of a highly fluorinated ionic liquid and a weakly solvating fluorinated ether, whose hybridization structure enables the reversible operation of a battery chemistry based on Li 0 and LiNiO 2 (Ni = 100%), delivering nearly theoretical capacity of the latter (up to 249 mAh g -1 ) for >300 cycles with retention of 78.6% and in absence of unwanted morphological changes in both electrodes. Extensive characterization assisted by molecular dynamic simulation and density functional theory calculations reveals the function of the fluorinated ether to be far more profound than simple dilution and viscosity reduction. Instead, it induces drastic changes in Li + -solvation environment, the consequence of which engenders simultaneous stabilization of electrode/electrolyte and interfacing via formation of respective interfacial chemistries. This study further unlocks fundamental knowledge underneath the prevailing "diluent strategy" that is extensively applied by the electrolyte researchers and opens more design space for the next-generation electrolytes and interphases for these coveted battery chemistries., (© 2024 The Author(s). Advanced Science published by Wiley‐VCH GmbH.)

Highly disordered amorphous Li 7 La 3 Zr 2 O 12 (aLLZO) is a promising class of electrolyte separators and protective layers for hybrid or all-solid-state batteries due to its grain-boundary-free nature and wide electrochemical stability window. Unlike low-entropy ionic glasses such as Li x PO y N z (LiPON), these medium-entropy non-Zachariasen aLLZO phases offer a higher number of stable structure arrangements over a wide range of tunable synthesis temperatures, providing the potential to tune the LBU-Li + transport relation. It is revealed that lanthanum is the active "network modifier" for this new class of highly disordered Li + conductors, whereas zirconium and lithium serve as "network formers". Specifically, within the solubility limit of La in aLLZO, increasing the La concentration can result in longer bond distances between the first nearest neighbors of Zr─O and La─O within the same local building unit (LBU) and the second nearest neighbors of Zr─La across two adjacent network-former and network-modifier LBUs, suggesting a more disordered medium- and long-range order structure in LLZO. These findings open new avenues for future designs of amorphous Li + electrolytes and the selection of network-modifier dopants. Moreover, the wide yet relatively low synthesis temperatures of these glass-ceramics make them attractive candidates for low-cost and more sustainable hybrid- or all-solid-state batteries for energy storage., (© 2024 The Authors. Advanced Materials published by Wiley‐VCH GmbH.)

The inhomogeneous nucleation and growth of Li dendrite combined with the spontaneous side reactions with the electrolytes dramatically challenge the stability and safety of Li metal anode (LMA). Despite tremendous endeavors, current success relies on the use of significant excess of Li to compensate the loss of active Li during cycling. Herein, a near-surface Li + irrigation strategy is developed to regulate the inhomogeneous Li deposition behavior and suppress the consequent side reactions under limited Li excess condition. The conformal polypyrrole (PPy) coating layer on Cu surface via oxidative chemical vapor deposition technique can induce the migration of Li + to the interregional space between PPy and Cu, creating a near-surface Li + -rich region to smooth diffusion of ion flux and uniform the deposition. Moreover, as evidenced by multiscale characterizations including synchrotron high-energy X-ray diffraction scanning, a robust N-rich solid-electrolyte interface (SEI) is formed on the PPy skeleton to effectively suppress the undesired SEI formation/dissolution process. Strikingly, stable Li metal cycling performance under a high areal capacity of 10 mAh cm -2 at 2.0 mA cm -2 with merely 0.5 × Li excess is achieved. The findings not only resolve the long-standing poor LMA stability/safety issues, but also deepen the mechanism understanding of Li deposition process., (© 2023 UChicago Argonne, LLC and The Authors. Small published by Wiley‐VCH GmbH.)

Nanosecond time-resolved X-ray (tr-XAS) and optical transient absorption spectroscopy (OTA) are applied to study 3 multimolecular photocatalytic systems with [Ru(bpy) 3 ] 2+ photoabsorber, ascorbic acid electron donor and Co catalysts with methylene (1), hydroxomethylene (2) and methyl (3) amine substituents in pure water. OTA and tr-XAS of 1 and 2 show that the favored catalytic pathway involves reductive quenching of the excited photosensitizer and electron transfer to the catalyst to form a Co II square pyramidal intermediate with a bonded aqua molecule followed by a Co I square planar derivative that decays within ≈8 μs. By contrast, a Co I square pyramidal intermediate with a longer decay lifetime of ≈35 μs is formed from an analogous Co II geometry for 3 in H 2 O. These results highlight the protonation of Co I to form the elusive hydride species to be the rate limiting step and show that the catalytic rate can be enhanced through hydrogen containing pendant amines that act as H-H bond formation proton relays., (© 2023 The Authors. ChemSusChem published by Wiley-VCH GmbH.)

The energies of the frontier molecular orbitals determine the optoelectronic properties in organic films, which are crucial for their application, and strongly depend on the morphology and supramolecular structure. The impact of the latter two properties on the electronic energy levels relies primarily on nearest-neighbor interactions, which are difficult to study due to their nanoscale nature and heterogeneity. Here, an automated method is presented for fabricating thin films with a tailored ratio of surface to bulk sites and a controlled extension of domain edges, both of which are used to control nearest-neighbor interactions. This method uses a Langmuir-Schaefer-type rolling transfer of Langmuir layers (rtLL) to minimize flow during the deposition of rigid Langmuir layers composed of π-conjugated molecules. Using UV-vis absorption spectroscopy, atomic force microscopy, and transmission electron microscopy, it is shown that the rtLL method advances the deposition of multi-Langmuir layers and enables the production of films with defined morphology. The variation in nearest-neighbor interactions is thus achieved and the resulting systematically tuned lowest unoccupied molecular orbital (LUMO) energies (determined via square-wave voltammetry) enable the establishment of a model that functionally relates the LUMO energies to a morphological descriptor, allowing for the prediction of the range of accessible LUMO energies., (© 2023 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

High quantum yield triplets, populated by initially prepared excited singlets, are desired for various energy conversion schemes in solid working compositions like porous MOFs. However, a large disparity in the distribution of the excitonic center of mass, singlet-triplet intersystem crossing (ISC) in such assemblies is inhibited, so much so that a carboxy-coordinated zirconium heavy metal ion cannot effectively facilitate the ISC through spin-orbit coupling. Circumventing this sluggish ISC, singlet fission (SF) is explored as a viable route to generating triplets in solution-stable MOFs. Efficient SF is achieved through a high degree of interchromophoric coupling that facilitates electron super-exchange to generate triplet pairs. Here we show that a predesigned chromophoric linker with extremely poor ISC efficiency (kISC) but  form triplets in MOF in contrast to the frameworks that are built from linkers with sizable kISC but . This work opens a new photophysical and photochemical avenue in MOF chemistry and utility in energy conversion schemes., (© 2023 Wiley-VCH GmbH.)

We communicate a feasibility study for high-resolution structural characterization of biomacromolecules in aqueous solution from X-ray scattering experiments measured over a range of scattering vectors (q) that is approximately two orders of magnitude wider than used previously for such systems. Scattering data with such an extended q-range enables the recovery of the underlying real-space atomic pair distribution function, which facilitates structure determination. We demonstrate the potential of this method for biomacromolecules using several types of cyclodextrins (CD) as model systems. We successfully identified deviations of the tilting angles for the glycosidic units in CDs in aqueous solutions relative to their values in the crystalline forms of these molecules. Such level of structural detail is inaccessible from standard small angle scattering measurements. Our results call for further exploration of ultra-wide-angle X-ray scattering measurements for biomacromolecules., (© 2023 Wiley-VCH GmbH.)

Ammonia is an indispensable commodity in the agricultural and pharmaceutical industries. Direct nitrate-to-ammonia electroreduction is a decentralized route yet challenged by competing side reactions. Most catalysts are metal-based, and metal-free catalysts with high nitrate-to-ammonia conversion activity are rarely reported. Herein, it is shown that amorphous graphene synthesized by laser induction and comprising strained and disordered pentagons, hexagons, and heptagons can electrocatalyze the eight-electron reduction of NO 3 - to NH 3 with a Faradaic efficiency of ≈100% and an ammonia production rate of 2859 µg cm -2 h -1 at -0.93 V versus reversible hydrogen electrode. X-ray pair-distribution function analysis and electron microscopy reveal the unique molecular features of amorphous graphene that facilitate NO 3 - reduction. In situ Fourier transform infrared spectroscopy and theoretical calculations establish the critical role of these features in stabilizing the reaction intermediates via structural relaxation. The enhanced catalytic activity enables the implementation of flow electrolysis for the on-demand synthesis and release of ammonia with >70% selectivity, resulting in significantly increased yields and survival rates when applied to plant cultivation. The results of this study show significant promise for remediating nitrate-polluted water and completing the NO x cycle., (© 2023 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

The universal cathode crossover such as chemical and oxygen has been significantly overlooked in lithium metal batteries using high-energy cathodes which leads to severe capacity degradation and raises serious safety concerns. Herein, a versatile and thin (≈25 μm) interlayer composed of multifunctional active sites was developed to simultaneously regulate the Li deposition process and suppress the cathode crossover. The as-induced dual-gradient solid-electrolyte interphase combined with abundant lithiophilic sites enable stable Li stripping/plating process even under high current density of 10 mA cm -2 . Moreover, X-ray photoelectron spectroscopy and synchrotron X-ray experiments revealed that N-rich framework and CoZn dual active sites can effectively mitigate the undesired cathode crossover, hence significantly minimizing Li corrosion. Therefore, assembled lithium metal cells using various high-energy cathode materials including LiNi 0.7 Mn 0.2 Co 0.1 O 2 , Li 1.2 Co 0.1 Mn 0.55 Ni 0.15 O 2 , and sulfur demonstrate significantly improved cycling stability with high cathode loading., (© 2023 Wiley-VCH GmbH.)

Sulfide-based solid-state electrolytes (SSEs) exhibit many tantalizing properties including high ionic conductivity and favorable mechanical properties for next-generation solid-state batteries. Widespread adoption of these materials is hindered by their intrinsic instability under ambient conditions, which makes them difficult to process at scale, and instability at the Li||SSE and cathode||SSE interfaces, which limits cell performance and lifetime. Atomic layer deposition is leveraged to grow thin Al 2 O 3 coatings on Li 6 PS 5 Cl powders to address both issues simultaneously. These coatings can be directly grown onto Li 6 PS 5 Cl particles with negligible chemical modification of the underlying material and enable exposure of powders to pure and H 2 O-saturated oxygen environments for ≥4 h with minimal reactivity, compared with significant degradation of the uncoated powder. Pellets fabricated from coated powders exhibit ionic conductivities up to 2× higher than those made from uncoated material, with a simultaneous decrease in electronic conductivity and significant suppression of chemical reactivity at the Li-SSE interface. These benefits result in significantly improved room temperature cycle life at high capacity and current density. It is hypothesized that this enhanced performance derives from improved intergranular properties and improved Li metal adhesion. This work points to a completely new framework for designing active, stable, and scalable materials for next-generation solid-state batteries., (© 2023 UChicago Argonne, LLC. Advanced Materials published by Wiley-VCH GmbH.)

This study presents a new material, "H x CrS 2 " (denotes approximate composition) formed by proton-exchange of NaCrS 2 which has a measured capacity of 728 mAh g -1 with significant improvements to capacity retention, sustaining over 700 mAh g -1 during cycling experiments. This is the highest reported capacity for a transition metal sulfide electrode and outperforms the most promising proposed sodium anodes to date. H x CrS 2 exhibits a biphasic structure featuring alternating crystalline and amorphous lamella on the scale of a few nanometers. This unique structural motif enables reversible access to Cr redox in the material resulting in higher capacities than seen in the parent structure which features only S redox. Pretreatment by proton-exchange offers a route to materials such as H x CrS 2 which provide fast diffusion and high capacities for sodium-ion batteries., (© 2023 Wiley-VCH GmbH.)

Increasing redox-active species concentrations can improve viability for organic redox flow batteries by enabling higher energy densities, but the required concentrated solutions can become viscous and less conductive, leading to inefficient electrochemical cycling and low material utilization at higher current densities. To better understand these tradeoffs in a model system, we study a highly soluble and stable redox-active couple, N-(2-(2-methoxyethoxy)ethyl)phenothiazine (MEEPT), and its bis(trifluoromethanesulfonyl)imide radical cation salt (MEEPT-TFSI). We measure the physicochemical properties of electrolytes containing 0.2-1 M active species and connect these to symmetric cell cycling behavior, achieving robust cycling performance. Specifically, for a 1 M electrolyte concentration, we demonstrate 94% materials utilization, 89% capacity retention, and 99.8% average coulombic efficiency over 435 h (100 full cycles). This demonstration helps to establish potential for high-performing, concentrated nonaqueous electrolytes and highlights possible failure modes in such systems., (© 2023 Wiley-VCH GmbH.)

Cyanopyridines and cyanophenylpyridines were investigated as anolytes for nonaqueous redox flow batteries (RFBs). The three isomers of cyanopyridine are reduced at potentials of -2.2 V or lower vs. ferrocene +/0 (Fc +/0 ), but the 3-CNPy⋅ - radical anion forms a sigma-dimer that is re-oxidized at E≈-1.1 V, which would lead to poor voltaic efficiency in a RFB. Bulk electrochemical charge-discharge cycling of the cyanopyridines in acetonitrile and 0.50 M [NBu 4 ][PF 6 ] shows that 2-CNPy and 4-CNPy lose capacity quickly under these conditions, due to irreversible chemical reaction/decomposition of the radical anions. Density-functional theory (DFT) calculations indicated that adding a phenyl group to the cyanopyridines would, for some isomers, limit dimerization and improve the stability of the radical anions, while shifting their E 1/2 only about +0.10 V relative to the parent cyanopyridines. Among the cyanophenylpyridines, 3-CN-6-PhPy and 3-CN-4-PhPy are the most promising as anolytes. They exhibit reversible reductions at E 1/2 =-2.19 and -2.22 V vs. ferrocene +/0 , respectively, and retain about half of their capacity after 30 bulk charge-discharge cycles. An improved version of 3-CN-6-PhPy with three methyl groups (3-cyano-4-methyl-6-(3,5-dimethylphenyl)pyridine) has an extremely low reduction potential of -2.50 V vs. Fc +/0 (the lowest reported for a nonaqueous RFB anolyte) and loses only 0.21 % of capacity per cycle during charge-discharge cycling in acetonitrile., (© 2022 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

The commercialization of lithium-sulfur (Li-S) batteries is still hindered by the unsatisfactory cell performance under practical working conditions, which is mainly caused by the sluggish cathode redox kinetics, severe polysulfide shuttling, and poor Li stripping/plating reversibility. Herein, we report an effective strategy by combining Se-doped S hosted in an ordered macroporous framework with a highly fluorinated ether (HFE)-based electrolyte to simultaneously address the aforementioned issues in both cathode and anode. A reversible and stable high areal capacity of >5.4 mAh cm -2 with high Coulombic efficiency >99.2 % can be achieved under high areal Se/S loading (5.8 mg cm -2 ), while the underlying mechanism was further revealed through synchrotron X-ray probes and Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS). The practical application potential was further evaluated at low (0 °C) and high (55 °C) temperatures under high areal Se/S loading (>5.0 mg cm -2 ) and thin Li metal (40 μm)., (© 2022 Wiley-VCH GmbH.)

Single atom sites (SAS) of FeN 4 are clarified as one of the most active components for the oxygen reduction reaction (ORR). Effective strategies by engineering the local coordination environment and site density of FeN 4 sites are crucial to further enhance the electrocatalytic ORR performance. Herein, the integration of a second metal of Mn with Fe to construct Fe&Mn/N-C catalysts with enhanced density of FeN 4 active sites and modulated electronic structure is reported. The formation of MnN 4 centers modulates the local environment of FeN 4 sites and reserves more FeN 4 embedded in carbon substrate by forming the possible FeN 4 -O-MnN 4 configurations. Density functional theory calculations demonstrate that the overall energy barrier of ORR is decreased over the FeN 4 -O-MnN 4 moieties. Therefore, the Fe&Mn/N-C catalyst exhibits enhanced ORR performance both in alkaline and acidic solution (half-wave potentials are 0.904 and 0.781 V). This work provides an effective strategy by modulating the local electronic structure and density of FeN 4 active sites to improve the ORR activity and stability through Mn cooperation., (© 2022 Wiley-VCH GmbH.)

High-energy X-ray scattering and pair distribution function analysis (HEXS/PDF) is a powerful method to reveal the structure of materials lacking long-range order, but is underutilized for molecular complexes in solution. We demonstrate the application of HEXS/PDF with 0.26 Å resolution to uncover the solution structure of five bimetallic Cu I /Ru II /Os II complexes. HEXS/PDF of each complex in acetonitrile solution confirms the pairwise distances in the local coordination sphere of each metal center as well as the metal⋅⋅⋅metal distances separated by over 12 Å. The metal⋅⋅⋅metal distance detected in solution is compared with that from the crystal structure and molecular models to confirm that distortions to the metal bridging ligand are unique to the solid state. This work presents the first example of observing sub-Ångström conformational differences by direct comparison of solution phase and solid-state structures and shows the potential for HEXS/PDF in the determination of solution structure of single molecules., (© 2021 Wiley-VCH GmbH.)

Biomimetic metal-organic frameworks have attracted great attention as they can be used as bio-inspired models, allowing us to gain important insights into how large biological molecules function as catalysts. In this work, we report the synthesis and utilization of such a metal-metalloporphyrin framework (MMPF) that is constructed from a custom-designed ligand as an efficient halogen bond donor catalyst for Diels-Alder reactions under ambient conditions. The implementation of fabricated halogen bonding capsule as binding pocket with high-density C-Br bonds enabled the use of halogen bonding to facilitate organic transformations in their three-dimensional cavities. Through combined experimental and computational studies, we showed that the substrate molecules diffuse through the pores of the MMPF, establishing a host-guest system via the C-Br⋅⋅⋅π interaction. The formation of halogen bonds is a plausible explanation for the observed boosted catalytic efficiency in Diels-Alder reactions. Moreover, the unique capability of MMPF highlights new opportunities in using artificial non-covalent binding pockets as highly tunable and selective catalytic materials., (© 2021 Wiley-VCH GmbH.)

Ligand-coordinated supported catalysts (LCSCs) are of growing interest for heterogeneous single-atom catalysis. Here, the effect of the choice of organic ligand on the activity and stability of TiO 2 -supported single-atom Pt-ligand catalysts was investigated for ethylene hydrogenation. The activity of these catalysts showed a significant dependence on the choice of ligand and also correlated with coordination number for Pt-ligand and Pt-Cl - . Of the three ligands examined in this study, the one with the lowest Pt coordination number, 1,10-phenanthroline-5,6-dione (PDO), showed the lowest reaction temperature and highest reaction rate, likely due to those metal sites being more accessible to reactant adsorption. In-situ X-ray absorption spectroscopy (XAS) experiments showed that the activity also correlated with good heterolytic dissociation of hydrogen, which was supported by OH/OD exchange experiments and was the rate-determining step of the hydrogenation reaction. In these in-situ XAS experiments up to 190 °C, the supported Pt-ligand catalyst showed excellent stability against structural and chemical change. Instead of Pt, the PDO ligand could be coordinated with Ir on TiO 2 to form Ir LCSCs that showed slow activation by loss of Ir-Cl bonds, then excellent stability in the hydrogenation of ethylene. These results provide the chance to engineer ligand-coordinated supported catalysts at the single-atom catalyst level by the choice of ligand and enable new applications at relatively high temperature., (© 2021 Wiley-VCH GmbH.)

Invited for this month's cover is the group of Steven Tait at Indiana University. The image shows single metal atoms stabilized by small molecules on a titanium dioxide powder support that are active in catalyzing ethylene hydrogenation. The Full Paper itself is available at 10.1002/cssc.202100208., (© 2021 Wiley-VCH GmbH.)

In a magnetic field, cubic Fe 3 O 4 nanoparticles exhibit assembly behavior that is a consequence of a competition between magnetic dipole-dipole and ligand interactions. In most cases, the interactions between short hydrophobic ligands dominate and dictate assembly outcome. To better tune the face-to-face interactions, cubic Fe 3 O 4 nanoparticles were functionalized with DNA. Their assembly behaviors were investigated both with and without an applied magnetic field. Upon application of a field, the tilted orientation of cubes, enabled by the flexible DNA ligand shell, led to an unexpected crystallographic alignment of the entire superlattice, as opposed to just the individual particles, along the field direction as revealed by small and wide-angle X-ray scattering. This observation is dependent upon DNA length and sequence and cube dimensions. Taken together, these studies show how combining physical and chemical control can expand the possibilities of crystal engineering with DNA., (© 2020 Wiley-VCH GmbH.)

The storage of solar energy in chemical bonds will depend on pH-universal catalysts that are not only impervious to acid, but actually thrive in it. Whereas other homogeneous water oxidation catalysts are less active in acid, we report a catalyst that maintained high electrocatalytic turnover frequency at pH values as low as 1.1 and 0.43 (k cat =1501±608 s -1 and 831±254 s -1 , respectively). Moreover, current densities, related to catalytic reaction rates, ranged from 15 to 50 mA cm -2  mM -1 comparable to those reported for state-of-the-art heterogeneous catalysts and 30 to 100 times greater than those measured for two prominent literature homogeneous catalysts at pH 1.1 and 0.43. The catalyst also exhibited excellent durability when a chemical oxidant was used (Ce IV , 7400 turnovers, TOF 0.88 s -1 ). Preliminary computational studies suggest that the unusual active-site sulfonate group acts a proton relay even in strong acid, as intended., (© 2020 Wiley-VCH GmbH.)

Li-rich cathode materials are of significant interest for coupling anionic redox with cationic redox chemistry to achieve high-energy-density batteries. However, lattice oxygen loss and derived structure distortion would induce serious capacity loss and voltage decay, further hindering its practical application. Herein, a novel Li-rich cathode material, O3-type Li 0.6 [Li 0.2 Mn 0.8 ]O 2 , is developed with the pristine state displaying both a Li excess in the transition metal layer and a deficiency in the alkali metal layer. Benefiting from stable structure evolution and Li migration processes, not only can high reversible capacity (≈329 mAh g -1 ) be harvested but also irreversible/reversible anionic/cationic redox reactions are comprehensively assigned via the combination of in/ex situ spectroscopies. Furthermore, irreversible lattice oxygen loss and structure distortion are effectively restrained, resulting in long-term cycle stability (capacity drop of 0.045% per cycle, 500 cycles). Altogether, tuning the Li state in the alkali metal layer presents a promising way for modification of high-capacity Li-rich cathode candidates., (© 2020 Wiley-VCH GmbH.)

Metal-organic framework (MOF)-driven synthesis is considered as a promising alternative for the development of new catalytic materials with well-designed active sites. This synthetic approach is used here to gradually transform a new bimetallic MOF, with Pd and Fe as the metal components, by the in situ generation of aniline under mild conditions. This methodology results in a compositionally homogeneous nanocomposite formed by Fe-doped Pd nanoparticles that, in turn, are supported on iron oxide-doped carbon. The nanocomposite has been fully characterized by several techniques such as IR and Raman spectroscopy, TEM, XPS, and XAS. The performance of this nanocomposite as an heterogeneous catalyst for hydrogenation of nitroarenes and nitrobenzene coupling with benzaldehyde has been evaluated, proving it to be an efficient and reusable catalyst., (© 2020 Wiley-VCH GmbH.)

Despite the exceptionally high energy density of lithium metal anodes, the practical application of lithium-metal batteries (LMBs) is still impeded by the instability of the interphase between the lithium metal and the electrolyte. To formulate a functional electrolyte system that can stabilize the lithium-metal anode, the solvation behavior of the solvent molecules must be understood because the electrochemical properties of a solvent can be heavily influenced by its solvation status. We unambiguously demonstrated the solvation rule for the solid-electrolyte interphase (SEI) enabler in an electrolyte system. In this study, fluoroethylene carbonate was used as the SEI enabler due to its ability to form a robust SEI on the lithium metal surface, allowing relatively stable LMB cycling. The results revealed that the solvation number of fluoroethylene carbonate must be ≥1 to ensure the formation of a stable SEI in which the sacrificial reduction of the SEI enabler subsequently leads to the stable cycling of LMBs., (© 2020 Wiley-VCH GmbH.)

Electrolyte modulation simultaneously suppresses polysulfide the shuttle effect and lithium dendrite formation of lithium-sulfur (Li-S) batteries. However, the sluggish S redox kinetics, especially under high S loading and lean electrolyte operation, has been ignored, which dramatically limits the cycle life and energy density of practical Li-S pouch cells. Herein, we demonstrate that a rational combination of selenium doping, core-shell hollow host structure, and fluorinated ether electrolytes enables ultrastable Li stripping/plating and essentially no polysulfide shuttle as well as fast redox kinetics. Thus, high areal capacity (>4 mAh cm -2 ) with excellent cycle stability and Coulombic efficiency were both demonstrated in Li metal anode and thick S cathode (4.5 mg cm -2 ) with a low electrolyte/sulfur ratio (10 μL mg -1 ). This research further demonstrates a durable Li-Se/S pouch cell with high specific capacity, validating the potential practical applications., (© 2020 Wiley-VCH GmbH.)

The application of single-atom catalysts (SACs) to high-temperature hydrogenation requires materials that thermodynamically favor metal atom isolation over cluster formation. We demonstrate that Pd can be predominantly dispersed as isolated atoms onto TiO 2 during the reverse water-gas shift (rWGS) reaction at 400 °C. Achieving atomic dispersion requires an artificial increase of the absolute TiO 2 surface area by an order of magnitude and can be accomplished by physically mixing a precatalyst (Pd/TiO 2 ) with neat TiO 2 prior to the rWGS reaction. The in situ dispersion of Pd was reflected through a continuous increase of rWGS activity over 92 h and supported by kinetic analysis, infrared and X-ray absorption spectroscopies and scanning transmission electron microscopy. The thermodynamic stability of Pd under high-temperature rWGS conditions is associated with Pd-Ti coordination, which manifests upon O-vacancy formation, and the artificial increase in TiO 2 surface area., (© 2020 Wiley-VCH GmbH.)

Preparation of supported metal catalysts with uniform particle size and coordination environment is a challenging and important topic in materials chemistry and catalysis. In this work, we report the regioselective generation of single-site Ir atoms and their evolution into stabilized subnanometric Ir clusters in MWW zeolite, which are located at the 10MR window connecting the two neighboring 12MR supercages. The size of the subnanometric Ir clusters can be controlled by the post-synthesis treatments and maintain below 1 nm even after being reduced at 650 °C, which cannot be readily achieved with samples prepared by conventional impregnation methods. The high structure sensitivity, size-dependence, of catalytic performance in the alkane hydrogenolysis reaction of Ir clusters in the subnanometric regime is evidenced., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Time-resolved X-ray (Tr-XAS) and optical transient absorption (OTA) spectroscopy on the pico-microsecond timescale coupled with density functional theory calculations are applied to study the light-induced spin crossover processes of a Fe-based macrocyclic complex in solution. Tr-XAS analysis after light illumination shows the formation of a seven-coordinated high-spin quintet metastable state, which relaxes to a six-coordinated high-spin configuration before decaying to the ground state. Kinetic analysis of the macrocyclic complex reveals an unprecedented long-lived decay lifetime of approximately 42.6 μs. Comparative studies with a non-macrocyclic counterpart illustrate a significantly shortened approximately 568-fold decay lifetime of about 75 ns, and highlight the importance of the ligand arrangement in stabilizing the reactivity of the excited state. Lastly, OTA analysis shows the seven-coordinated high-spin state to be formed within approximately 6.2 ps. These findings provide a complete understanding of the spin crossover reaction and relaxation pathways of the macrocyclic complex, and reveal the importance of a flexible coordination environment for their rational design., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In this work, an MWW-type zeolite with pillars containing silicon and niobium oxide was synthesized to obtain a hierarchical zeolite. The effect of niobium insertion in the pillaring process was determined by combining a controllable acidity and accessibility in the final material. All pillared materials had niobium occupying framework positions in pillars and extra-framework positions. The pillared material, Pil-Nb-4.5 with 4.5 wt % niobium, did not compromise the mesoporosity formed by pillaring, while the increase of niobium in the structure gradually decreased the mesoporosity and ordering of lamellar stacking. The morphology of the pillared zeolites and the niobium content were found to directly affect the catalytic activity. Specifically, we report on the activity of the MWW-type zeolites with niobium catalyzing the gas-phase oxidation of volatile organic compounds (VOCs), which is an important reaction for clean environmental. All produced MWW-type zeolites with niobium were catalytically active, even at low temperatures and low niobium loading, and provided excellent conversion efficiencies., (© 2020 Wiley-VCH GmbH.)

A systematic series of four novel homo- and heteroleptic Cu I photosensitizers based on tetradentate 1,10-phenanthroline ligands of the type X^N^N^X containing two additional donor moieties in the 2,9-position (X=SMe or OMe) were designed. Their solid-state structures were assessed by X-ray diffraction. Cyclic voltammetry, UV-vis absorption, emission and X-ray absorption spectroscopy were then used to determine their electrochemical, photophysical and structural features in solution. Following, time-resolved X-ray absorption spectroscopy in the picosecond time scale, coupled with time-dependent density functional theory calculations, provided in-depth information on the excited state electron configurations. For the first time, a significant shortening of the Cu-X distance and a change in the coordination mode to a pentacoordinated geometry is shown in the excited states of the two homoleptic complexes. These findings are important with respect to a precise understanding of the excited state structures and a further stabilization of this type of photosensitizers., (© 2020 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.)

Inspired by the sulfur-rich environment found in active hydrogenase enzymes, a Ni-based proton reduction catalyst with pentadentate N 2 S 3 ligand was synthesised. When coupled with [Ru(bpy) 3 ] 2+ (bpy=2,2'-bipyridine) as photosensitiser and ascorbate as electron donor in a 1:1 mixture of dimethylacetamide and aqueous ascorbic acid/ascorbate buffer, the catalyst showed improved photocatalytic activity compared with a homologous counterpart bearing a tetradentate N 2 S 2 ligand. The mechanistic pathway of photoinduced hydrogen evolution was comprehensively analysed through optical transient absorption and time-resolved X-ray absorption spectroscopy, which revealed important electronic and structural changes in the catalytic system during photoirradiation. The Ni II catalyst undergoes a photoinduced metal-centred reduction to form a Ni I intermediate with distorted square-bipyramidal geometry. Further kinetic analyses revealed differences in charge-separation dynamics between the pentadentate and tetradentate forms., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Nickel-iron layered double hydroxide (NiFe LDH) is a promising oxygen evolution reaction (OER) electrocatalyst under alkaline conditions. Much research has been performed to understand the structure-activity relationship of NiFe LDH under OER conditions. However, the specific role of the Fe species remains unclear and under debate. Herein, based on DFT calculations, it was discovered that the edge Fe sites show higher activity towards OER than either the edge Ni sites or lattice sites. Therefore, a facile acid-etching method was proposed to controllably induce the formation of edge Fe sites in NiFe LDH, and the obtained sample exhibited higher OER activity. X-ray absorption near edge structure and extended X-ray absorption fine structure analyses further revealed that the interaction of the edge Fe species with Ni is believed to contribute to the enhancement of the OER performance. This work provides a new understanding of the structure-activity relationship in NiFe LDH and offers a facile method for the design of efficient electrocatalysts in an alkaline environment., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A novel method for synthesizing and photopatterning colloidal crystals via light-responsive DNA is developed. These crystals are composed of 10-30 nm gold nanoparticles interconnected with azobenzene-modified DNA strands. The photoisomerization of the azobenzene molecules leads to reversible assembly and disassembly of the base-centered cubic (bcc) and face-centered cubic (fcc) crystalline nanoparticle lattices. In addition, UV light is used as a trigger to selectively remove nanoparticles on centimeter-scale thin films of colloidal crystals, allowing them to be photopatterned into preconceived shapes. The design of the azobenzene-modified linking DNA is critical and involves complementary strands, with azobenzene moieties deliberately staggered between the bases that define the complementary code. This results in a tunable wavelength-dependent melting temperature (T m ) window (4.5-15 °C) and one suitable for affecting the desired transformations. In addition to the isomeric state of the azobenzene groups, the size of the particles can be used to modulate the T m window over which these structures are light-responsive., (© 2020 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Interface-induced modifications of the electronic, magnetic, and lattice degrees of freedom drive an array of novel physical properties in oxide heterostructures. Here, large changes in metal-oxygen band hybridization, as measured in the oxygen ligand hole density, are induced as a result of interfacing two isovalent correlated oxides. Using resonant X-ray reflectivity, a superlattice of SrFeO 3 and CaFeO 3 is shown to exhibit an electronic character that spatially evolves from strongly O-like in SrFeO 3 to strongly Fe-like in CaFeO 3 . This alternating degree of Fe electronic character is correlated with a modulation of an Fe 3d orbital polarization, giving rise to an orbital superstructure. At the SrFeO 3 /CaFeO 3 interfaces, the ligand hole density and orbital polarization reconstruct in a single unit cell of CaFeO 3 , demonstrating how the mismatch in these electronic parameters is accommodated at the interface. These results provide new insight into how the orbital character of electrons is altered by correlated oxide interfaces and lays out a broadly applicable approach for depth-resolving band hybridization., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Hydrofluoroethers (HFEs) have been adopted widely as electrolyte cosolvents for battery systems because of their unique low solvating behavior. The electrolyte is currently utilized in lithium-ion, lithium-sulfur, lithium-air, and sodium-ion batteries. By evaluating the relative solvating power of different HFEs with distinct structural features, and considering the shuttle factor displayed by electrolytes that employ HFE cosolvents, we have established the quantitative structure-activity relationship between the organic structure and the electrochemical performance of the HFEs. Moreover, we have established the linear free-energy relationship between the structural properties of the electrolyte cosolvents and the polysulfide shuttle effect in lithium-sulfur batteries. These findings provide valuable mechanistic insight into the polysulfide shuttle effect in lithium-sulfur batteries, and are instructive when it comes to selecting the most suitable HFE electrolyte cosolvent for different battery systems., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Nitrogenase enzymes catalyze the reduction of atmospheric dinitrogen to ammonia utilizing a Mo-7Fe-9S-C active site, the so-called FeMoco cluster. FeMoco and an analogous small-molecule (Et 4 N)[(Tp)MoFe 3 S 4 Cl 3 ] cubane have both been proposed to contain unusual spin-coupled Mo III sites with an S(Mo)=1/2 non-Hund configuration at the Mo atom. Herein, we present Fe and Mo L 3 -edge X-ray magnetic circular dichroism (XMCD) spectroscopy of the (Et 4 N)[(Tp)MoFe 3 S 4 Cl 3 ] cubane and Fe L 2,3 -edge XMCD spectroscopy of the MoFe protein (containing both FeMoco and the 8Fe-7S P-cluster active sites). As the P-clusters of MoFe protein have an S=0 total spin, these are effectively XMCD-silent at low temperature and high magnetic field, allowing for FeMoco to be selectively probed by Fe L 2,3 -edge XMCD within the intact MoFe protein. Further, Mo L 3 -edge XMCD spectroscopy of the cubane model has provided experimental support for a local S(Mo)=1/2 configuration, demonstrating the power and selectivity of XMCD., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Time-domain synchrotron Mössbauer spectroscopy (SMS) based on the Mössbauer effect of 161 Dy has been used to investigate the magnetic properties of a Dy III -based single-molecule magnet (SMM). The magnetic hyperfine field of [Dy(Cy 3 PO) 2 (H 2 O) 5 ]Br 3 ⋅2 (Cy 3 PO)⋅2 H 2 O⋅2 EtOH is with B 0 =582.3(5) T significantly larger than that of the free-ion Dy III with a 6 H 15/2 ground state. This difference is attributed to the influence of the coordinating ligands on the Fermi contact interaction between the s and 4f electrons of the Dy III ion. This study demonstrates that 161 Dy SMS is an effective local probe of the influence of the coordinating ligands on the magnetic structure of Dy-containing compounds., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Metal-organic framework (MOF)-derived materials have attracted increasing interest and show promising catalytic performances in many fields. Intensive efforts have been focused on the structure design and metal-site integration in MOF-derived catalysts. However, the key catalytic processes related with the metal sites in MOF-derived catalysts that dominate the electrocatalytic performance still remain obscure. Herein, we show a neglected but critical issue in the pyrolytic synthesis of MOF-derived catalysts: the coupled evolution of dual sites, that is, metallic sites and single-atom metal sites. The identification of active sites of single-atom sites from the visible particles has been elucidated through the combined X-ray spectroscopic, electron microscopic, and electrochemical studies. Interestingly, after a total removal of metallic cobalt sites, catalysts with purified single-atom metal sites show no faltering activity for either the oxygen reduction reaction (ORR) or hydrogen evolution reaction (HER), while significantly enhanced ORR selectivity is achieved; this reveals the dominant activity and selectivity contribution from single-atom electrocatalysis. The insight of the coupled evolution of dual sites and the as-demonstrated dual-site decoupling strategies open up a new routine for the design and synthesis of MOF-derived catalysts with the optimized single-atom electrocatalysis towards various electrochemical reactions., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Relative solvating power, that is, the ratio of the coordination ratios between a solvent and the reference solvent, was used to probe the quantitative structure-activity relationship of electrolyte solvents and the lithium polysulfide (LiPS) dissolution in lithium-sulfur batteries. Internally referenced diffusion-ordered nuclear magnetic resonance spectroscopy (IR-DOSY) was used to determine the diffusion coefficient and coordination ratio, from which the relative solvating power can be easily measured. The higher the relative solvating power of an ethereal solvent, the more severe will be the LiPS dissolution and the lower the coulombic efficiency of the lithium-sulfur battery. A linear relationship was established between the logarithm of relative solvating power of a solvent and the degree of LiPS dissolution, rendering relative solvating power an important parameter in choosing the electrolyte solvent for lithium-sulfur batteries., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

We report the light-induced electronic and geometric changes taking place within a heteroleptic Cu I photosensitizer, namely [(xant)Cu(Me 2 phenPh 2 )]PF 6 (xant=xantphos, Me 2 phenPh 2 =bathocuproine), by time-resolved X-ray absorption spectroscopy in the ps-μs time regime. Time-resolved X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) analysis enabled the elucidation of the electronic and structural configuration of the copper center in the excited state as well as its decay dynamics in different solvent conditions with and without triethylamine acting as a sacrificial electron donor. A three-fold decrease in the decay lifetime of the excited state is observed in the presence of triethylamine, showing the feasibility of the reductive quenching pathway in the latter case. A prominent pre-edge feature is observed in the XANES spectrum of the excited state upon metal to charge ligand transfer transition, showing an increased hybridization of the 3d states with the ligand p orbitals in the tetrahedron around the Cu center. EXAFS and density functional theory illustrate a significant shortening of the Cu-N and an elongation of the Cu-P bonds together with a decrease in the torsional angle between the xantphos and bathocuproine ligand. This study provides mechanistic time-resolved understanding for the development of improved heteroleptic Cu I photosensitizers, which can be used for the light-driven production of hydrogen from water., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The development of cost-effective catalysts to replace noble metal is attracting increasing interests in many fields of catalysis and energy, and intensive efforts are focused on the integration of transition-metal sites in carbon as noble-metal-free candidates. Recently, the discovery of single-atom dispersed catalyst (SAC) provides a new frontier in heterogeneous catalysis. However, the electrocatalytic application of SAC is still subject to several theoretical and experimental limitations. Further advances depend on a better design of SAC through optimizing its interaction with adsorbates during catalysis. Here, distinctive from previous studies, favorable 3d electronic occupation and enhanced metal-adsorbates interactions in single-atom centers via the construction of nonplanar coordination is achieved, which is confirmed by advanced X-ray spectroscopic and electrochemical studies. The as-designed atomically dispersed cobalt sites within nonplanar coordination show significantly improved catalytic activity and selectivity toward the oxygen reduction reaction, approaching the benchmark Pt-based catalysts. More importantly, the illustration of the active sites in SAC indicates metal-natured catalytic sites and a media-dependent catalytic pathway. Achieving structural and electronic engineering on SAC that promotes its catalytic performances provides a paradigm to bridge the gap between single-atom catalysts design and electrocatalytic applications., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Single atoms and few-atom clusters of platinum are uniformly installed on the zirconia nodes of a metal-organic framework (MOF) NU-1000 via targeted vapor-phase synthesis. The catalytic Pt clusters, site-isolated by organic linkers, are shown to exhibit high catalytic activity for ethylene hydrogenation while exhibiting resistance to sintering up to 200 °C. In situ IR spectroscopy reveals the presence of both single atoms and few-atom clusters that depend upon synthesis conditions. Operando X-ray absorption spectroscopy and X-ray pair distribution analyses reveal unique changes in chemical bonding environment and cluster size stability while on stream. Density functional theory calculations elucidate a favorable reaction pathway for ethylene hydrogenation with the novel catalyst. These results provide evidence that atomic layer deposition (ALD) in MOFs is a versatile approach to the rational synthesis of size-selected clusters, including noble metals, on a high surface area support., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Dispersions of nanoscale precipitates in metallic alloys have been known to play a key role in strengthening, by increasing their strain hardenability and providing resistance to deformation. Although these phenomena have been extensively investigated in the last century, the traditional approaches employed in the past have not rendered an authoritative microstructural understanding in such materials. The effect of the precipitates' inherent complex morphology and their 3D spatial distribution on evolution and deformation behavior have often been precluded. This study reports, for the first time, implementation of synchrotron-based hard X-ray nanotomography in Al-Cu alloys to measure kinetics of different nanoscale phases in 3D, and reveals insights behind some of the observed novel phase transformation reactions. The experimental results of the present study reconcile with coarsening models from the Lifshitz-Slyozov-Wagner theory to an unprecedented extent, thereby establishing a new paradigm for thermodynamic analysis of precipitate assemblies. Finally, this study sheds light on the possibilities for establishing new theories for dislocation-particle interactions, based on the limitations of using the Orowan equation in estimating precipitation strengthening., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Currently, carbon fibers (CFs) from the solution spinning, air oxidation, and carbonization of polyacrylonitrile impose a lower price limit of ≈$10 per lb, limiting the growth in industrial and automotive markets. Polyethylene is a promising precursor to enable a high-volume industrial grade CF as it is low cost, melt spinnable and has high carbon content. However, sulfonated polyethylene (SPE)-derived CFs have thus far fallen short of the 200 GPa tensile modulus threshold for industrial applicability. Here, a graphitization process is presented catalyzed by the addition of boron that produces carbon fiber with >400 GPa tensile modulus at 2400 °C. Wide angle X-ray diffraction collected during carbonization reveals that the presence of boron reduces the onset of graphitization by nearly 400 °C, beginning around 1200 °C. The B-doped SPE-CFs herein attain 200 GPa tensile modulus and 2.4 GPa tensile strength at the practical carbonization temperature of 1800 °C., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Post-synthetic modification of the zirconium-based metal-organic framework (MOF) NU-1000 by atomic layer deposition (ALD), using tetramethoxysilane (Si(OMe) 4 ) as a precursor, led to the incorporation and stabilization of silicon oxide clusters composed of only a few silicon atoms in the framework's pores. The resulting SiO x functionalized material (Si-NU-1000) was found to be catalytically active despite the inactivity of related bulk silicon dioxide (SiO 2 ), thus demonstrating the positive effects of having nanosized clusters of SiO x . Moreover, Si-NU-1000 showed activity greater than that found for aluminum oxide based catalysts-oxides known for their high acidity-such as an aluminum oxide functionalized MOF (Al-NU-1000) and bulk γ-Al 2 O 3 . X-ray photoelectron spectroscopy and infrared spectroscopy measurements unmasked the electron donating nature of Si-NU-1000, explaining the unusual electronic properties of the nanosized SiO x clusters and supporting their high catalytic activity., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The lithium-air battery has great potential of achieving specific energy density comparable to that of gasoline. Several lithium oxide phases involved in the charge-discharge process greatly affect the overall performance of lithium-air batteries. One of the key issues is linked to the environmental oxygen-rich conditions during battery cycling. Here, the theoretical prediction and experimental confirmation of new stable oxygen-rich lithium oxides under high pressure conditions are reported. Three new high pressure oxide phases that form at high temperature and pressure are identified: Li 2 O 3 , LiO 2 , and LiO 4 . The LiO 2 and LiO 4 consist of a lithium layer sandwiched by an oxygen ring structure inherited from high pressure ε-O 8 phase, while Li 2 O 3 inherits the local arrangements from ambient LiO 2 and Li 2 O 2 phases. These novel lithium oxides beyond the ambient Li 2 O, Li 2 O 2 , and LiO 2 phases show great potential in improving battery design and performance in large battery applications under extreme conditions.

Nanoscale crystal growth control is crucial for tailoring two-dimensional (2D) zeolites (crystallites with thickness less than two unit cells) and thicker zeolite nanosheets for applications in separation membranes and as hierarchical catalysts. However, methods to control zeolite crystal growth with nanometer precision are still in their infancy. Herein, we report solution-based growth conditions leading to anisotropic epitaxial growth of 2D zeolites with rates as low as few nanometers per day. Contributions from misoriented surface nucleation and rotational intergrowths are eliminated. Growth monitoring at the single-unit-cell level reveals novel nanoscale crystal-growth phenomena associated with the lateral size and surface curvature of 2D zeolites., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Molecular ruthenium-based water oxidation catalyst precursors of general formula [Ru(tda)(L i ) 2 ] (tda 2- is [2,2':6',2''-terpyridine]-6,6''-dicarboxylato; L 1 =4-(pyren-1-yl)-N-(pyridin-4-ylmethyl)butanamide, 1 b; L 2 =4-(pyren-1-yl)pyridine), 1 c), have been prepared and thoroughly characterized. Both complexes contain a pyrene group allowing ready and efficiently anchoring via π interactions on multi-walled carbon nanotubes (MWCNT). These hybrid solid state materials are exceptionally stable molecular water-oxidation anodes capable of carrying out more than a million turnover numbers (TNs) at pH 7 with an E app =1.45 V vs. NHE without any sign of degradation. XAS spectroscopy analysis before, during, and after catalysis together with electrochemical techniques allow their unprecedented oxidative ruggedness to be monitored and verified., (© 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Alkali metal-oxygen batteries are of great interests for energy storage because of their unparalleled theoretical energy densities. Particularly attractive is the emerging Na-O 2 battery because of the formation of superoxide as the discharge product. Dimethyl sulfoxide (DMSO) is a promising solvent for this battery but its instability towards Na makes it impractical in the Na-O 2 battery. Herein we report the enhanced stability of Na in DMSO solutions containing concentrated sodium trifluoromethanesulfonimide (NaTFSI) salts (>3 mol kg -1 ). Raman spectra of NaTFSI/DMSO electrolytes and ab initio molecular dynamics simulation reveal the Na + solvation number in DMSO and the formation of Na(DMSO) 3 (TFSI)-like solvation structure. The majority of DMSO molecules solvating Na + in concentrated solutions reduces the available free DMSO molecules that can react with Na and renders the TFSI anion decomposition, which protects Na from reacting with the electrolyte. Using these concentrated electrolytes, Na-O 2 batteries can be cycled forming sodium superoxide (NaO 2 ) as the sole discharge product with improved long cycle life, highlighting the beneficial role of concentrated electrolytes for Na-based batteries., (© 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)