Search

Metal-organic frameworks (MOFs) are a rapidly growing class of materials that offer great promise in various applications. However, the synthesis remains challenging: for example, a range of crystal structures can often be accessed from the same building blocks, which complicates the phase selectivity. Likewise, the high sensitivity to slight changes in synthesis conditions may cause reproducibility issues. This is crucial, as it hampers the research and commercialization of affected MOFs. Here, it presents the first-ever interlaboratory study of the synthetic reproducibility of two Zr-porphyrin MOFs, PCN-222 and PCN-224, to investigate the scope of this problem. For PCN-222, only one sample out of ten was phase pure and of the correct symmetry, while for PCN-224, three are phase pure, although none of these show the spatial linker order characteristic of PCN-224. Instead, these samples resemble dPCN-224 (disordered PCN-224), which has recently been reported. The variability in thermal behavior, defect content, and surface area of the synthesised samples are also studied. The results have important ramifications for field of metal-organic frameworks and their crystallization, by highlighting the synthetic challenges associated with a multi-variable synthesis space and flat energy landscapes characteristic of MOFs., (© 2024 The Authors. Advanced Materials published by Wiley‐VCH GmbH.)

Encapsulating ultrasmall Cu nanoparticles inside Zr-MOFs to form core-shell architecture is very challenging but of interest for CO 2 reduction. We report for the first time the incorporation of ultrasmall Cu NCs into a series of benchmark Zr-MOFs, without Cu NCs aggregation, via a scalable room temperature fabrication approach. The Cu NCs@MOFs core-shell composites show much enhanced reactivity in comparison to the Cu NCs confined in the pore of MOFs, regardless of their very similar intrinsic properties at the atomic level. Moreover, introducing polar groups on the MOF structure can further improve both the catalytic reactivity and selectivity. Mechanistic investigation reveals that the Cu I sites located at the interface between Cu NCs and support serve as the active sites and efficiently catalyze CO 2 photoreduction. This synergetic effect may pave the way for the design of low-cost and efficient catalysts for CO 2 photoreduction into high-value chemical feedstock., (© 2022 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Layered covalent organic frameworks (2D-COFs), composed of reversible imine linkages and accessible pores, offer versatility for chemical modifications towards the development of catalytic materials. Nitrogen-enriched COFs are good candidates for binding Pd species. Understanding the local structure of reacting Pd sites bonded to the COF pores is key to rationalize interactions between active sites and porous surfaces. By combining advanced synchrotron characterization methods with periodic computational DFT modeling, the precise atomic structure of catalytic Pd sites attached to local defects is resolved within an archetypical imine-linked 2D-COF. This material was synthesized using an in situ method as a gel, under which imine hydrolysis and metalation reactions are coupled. Local defects formed in situ within imine-linked 2D-COF materials are highly reactive towards Pd metalation, resulting in active materials for Suzuki-Miyaura cross-coupling reactions., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Single atoms and few-atom clusters of platinum are uniformly installed on the zirconia nodes of a metal-organic framework (MOF) NU-1000 via targeted vapor-phase synthesis. The catalytic Pt clusters, site-isolated by organic linkers, are shown to exhibit high catalytic activity for ethylene hydrogenation while exhibiting resistance to sintering up to 200 °C. In situ IR spectroscopy reveals the presence of both single atoms and few-atom clusters that depend upon synthesis conditions. Operando X-ray absorption spectroscopy and X-ray pair distribution analyses reveal unique changes in chemical bonding environment and cluster size stability while on stream. Density functional theory calculations elucidate a favorable reaction pathway for ethylene hydrogenation with the novel catalyst. These results provide evidence that atomic layer deposition (ALD) in MOFs is a versatile approach to the rational synthesis of size-selected clusters, including noble metals, on a high surface area support., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Remarkably simple Ir III catalysts enable the isomerization of primary and sec-allylic alcohols under very mild reaction conditions. X-ray absorption spectroscopy (XAS) and mass spectrometry (MS) studies indicate that the catalysts, with the general formula [Cp*Ir III ], require a halide ligand for catalytic activity, but no additives or additional ligands are needed., (© 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The chemical stability of metal-organic frameworks (MOFs) is a major factor preventing their use in industrial processes. Herein, it is shown that judicious choice of the base for the Suzuki-Miyaura cross-coupling reaction can avoid decomposition of the MOF catalyst Pd@MIL-101-NH2 (Cr). Four bases were compared for the reaction: K2 CO3 , KF, Cs2 CO3 and CsF. The carbonates were the most active and achieved excellent yields in shorter reaction times than the fluorides. However, powder XRD and N2 sorption measurements showed that the MOF catalyst was degraded when carbonates were used but remained crystalline and porous with the fluorides. XANES measurements revealed that the trimeric chromium cluster of Pd@MIL-101-NH2 (Cr) is still present in the degraded MOF. In addition, the different countercations of the base significantly affected the catalytic activity of the material. TEM revealed that after several catalytic runs many of the Pd nanoparticles (NPs) had migrated to the external surface of the MOF particles and formed larger aggregates. The Pd NPs were larger after catalysis with caesium bases compared to potassium bases., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The synthesis of a metal-organic framework (UiO-67) functionalised simultaneously with two different transition metal complexes (Ir and Pd or Rh) through a one-pot procedure is reported for the first time. This has been achieved by an iterative modification of the synthesis parameters combined with characterisation of the resulting materials using different techniques, including X-ray absorption spectroscopy (XAS). The method also allows the first synthesis of UiO-67 with a very wide range of loadings (from 4 to 43 mol %) of an iridium complex ([IrCp*(bpydc)(Cl)Cl](2-) ; bpydc=2,2'-bipyridine-5,5'-dicarboxylate, Cp*=pentamethylcyclopentadienyl) through a pre-functionalisation methodology., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A diverse set of more than 40 highly functionalized biaryls was synthesized successfully through the Suzuki-Miyaura cross-coupling reaction catalyzed by Pd nanoparticles supported in a functionalized mesoporous MOF (8 wt % Pd@MIL-101(Cr)-NH2 ). This could be achieved under some of the mildest conditions reported to date and a strong control over the leaching of metallic species could be maintained, despite the presence of diverse functional groups and/or several heteroatoms. Some of the targeted molecules are important intermediates in the synthesis of pharmaceuticals and we clearly exemplify the versatility of this catalytic system, which affords better yields than currently existing commercial procedures. Most importantly, Pd@MIL-101-NH2 was packed in a micro-flow reactor, which represents the first report of metallic nanoparticles supported on MOFs employed in flow chemistry for catalytic applications. A small library of 11 isolated compounds was created in a continuous experiment without replacing the catalyst, demonstrating the potential of the catalyst for large-scale applications., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

We propose a multidisciplinary approach to face the interpretation of heterogeneous catalysis with alkaline-earth metal-organic frameworks (MOFs). Their oxygen-based polyhedra, which do not exhibit regular geometries, do act as very active Lewis acid sites. Four novel alkaline-earth MOFs that belong to three different structural types-Mg-AEPF-11, Mg-APF-12, Ca-AEPF-13 and Sr-APF-13-are reported, together with their net topologies, and a study of the symmetry distortions around the alkaline-earth metal polyhedra by using a continuous shape mapping (CShM) description. These MOFs are good catalysts in the selective hydrogenation of styrene. Even more, Sr-AEPF-13 shows the best conversions ever published with alkaline-earth MOFs for the hydrogenation of activated alkenes under mild conditions. A combination of crystallographic and topological analysis and theoretical calculations, together with experimental catalytic results, has been applied to understand the catalytic activity of these four novel alkaline-earth MOFs. This work demonstrates that the presence of symmetry-distorted alkaline-earth polyhedra gives rise to highly catalytic-active MOFs in the hydrogenation of activated alkenes., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Herein, we present a Ca-based metal-organic framework named AEPF-1, which is an active and selective catalyst in olefin hydrogenation reactions. AEPF-1 exhibits a phase transition upon desorption of guest molecules. This structural transformation takes place by a crystal to crystal transformation accompanied by the loss of single-crystal integrity. Powder diffraction methods and computational studies were applied to determine the structure of the guest-free phase. This work also presents data on the exceptional adsorption behavior of this material, which is shown to be capable of separating polar from nonpolar organic solvents, and is a good candidate for selective solvent adsorption under mild conditions., (Copyright © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)