Search

Lithium-rich layered oxide (LRLO) materials have attracted significant attention due to their high specific capacity, low cost, and environmental friendliness. However, owing to its unique capacity activation mechanism, the release of lattice oxygen during the first charge process leads to a series of problems, such as severe voltage decay, poor cycle stability, and poor rate performance. Herein, a fluorinated quasi-solid-state electrolyte (QSSE) via a simple thermal polymerization method toward lithium metal batteries with LRLO materials is reported. The well-designed QSSE exhibits an ionic conductivity of 6.4 × 10 -4 S cm -1 at 30 °C and a wide electrochemical stable window up to 5.6 V. Most importantly, XPS spectra demonstrate the generation of a LiF-rich electrode-electrolyte interface (EEI), where the in situ generated LiF provides strong protection against the structural degradation of LRLO materials and directs the uniform plating/stripping behaviors of lithium-ions to inhibit the formation of lithium dendrites. As a result, LRLO/QSSE/Li batteries exhibit excellent rate performance and demonstrate a large initial capacity for 209.7 mA h g -1 with a capacity retention of 80.8% after 200 cycles at 0.5C. This work provides a new insight for the LiF-rich EEI design of safe, high-performance quasi-solid-state lithium metal batteries., (© 2023 Wiley-VCH GmbH.)

Carbonaceous materials are considered strong candidates as anode materials for sodium-ion batteries (SIBs), which are expected to play an indispensable role in the carbon-neutral era. Herein, novel braided porous carbon fibres (BPCFs) are prepared using the chemical vapour deposition (CVD) method. The BPCFs possess interwoven porous structures and abundant vacancies. The growth mechanism of the BPCFs can be attributed to the polycrystalline transformation of the nanoporous copper catalyst in the early stage of CVD process. Density functional theory calculations suggest that the Na + adsorption energies of the mono-vacancy edges of the BPCFs (-1.22 and -1.09 eV) are lower than that of an ideal graphene layer (-0.68 eV), clarifying in detail the adsorption-dominated sodium storage mechanism. Hence, the BPCFs as an anode material present an outstanding discharge capacity of 401 mAh g -1 at 0.1 A g-1 after 500 cycles. Remarkably, this BPCFs anode, under high-mass-loading of 5 mg cm-2, shows excellent long-term cycling ability with a reversible capacity of 201 mAh g -1 at 10 A g -1 over 1000 cycles. This study provided a novel strategy for the development of high-performance carbonaceous materials for SIBs., (© 2022 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Hierarchical hollow CoP and carbon composites were obtained through a facile synthetic method, where carbonization and phosphorization of the precursor were completed within one single step. The composites are composed of hollow CoP@C spheres, which are further made up of CoP nanoparticles with a thin outer carbon layer. Electrochemical performances of the prepared CoP@C composites as anodes for sodium and potassium storage were evaluated and compared. In situ TEM, in situ synchrotron XRD, and DFT calculations were conducted to study the structural evolution and the interaction between Na/K and CoP during cycling processes. Benefiting from the synergistic effect of conductive carbon layer and hierarchical hollow structure, the as-prepared CoP@C composites demonstrate superior sodium and potassium storage capability as anode materials for rechargeable batteries., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Applications of room-temperature-sodium sulfur (RT-Na/S) batteries are currently impeded by the insulating nature of sulfur, the slow redox kinetics of sulfur with sodium, and the dissolution and migration of sodium polysulfides. Herein, a novel micrometer-sized hierarchical S cathode supported by FeS 2 electrocatalyst, which is grown in situ in well-confined carbon nanocage assemblies, is presented. The hierarchical carbon matrix can provide multiple physical entrapment to polysulfides, and the FeS 2 nanograins exhibit a low Na-ion diffusion barrier, strong binding energy, and high affinity for sodium polysulfides. Their combination makes it an ideal sulfur host to immobilize the polysulfides and achieve reversible conversion of polysulfides toward Na 2 S. Importantly, the hierarchical S cathode is suitable for large-scale production via the inexpensive and green spray-drying method. The porous hierarchical S cathode offers a high sulfur content of 65.5 wt%, and can deliver high reversible capacity (524 mAh g -1 over 300 cycles at 0.1 A g -1 ) and outstanding rate capability (395 mAh g -1 at 1 A g -1 for 850 cycles), holding great promise for both scientific research and real application., (© 2020 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Nanoparticles covered with surfactants are often used to study particle motion patterns and self-assembly processes in solutions. Surfactants have influence on the interparticle interactions and therefore on the particle motion tracks and final patterns. In this study, CoPt nanoparticles are synthesized in aqueous solution without any surfactant. In situ transmission electron microscopy observation is performed to monitor the self-assemble process. Two types of magnetic nanoparticle superlattice arrays are formed: hexagonal equal distance superlattice arrays when particle size is 3 nm, and tight unequal distance superlattice arrays when particle size is 4.5 nm. It is interesting to observe that two small arrays merge into a large one through rotational and translational movements. A Monte Carlo simulation is carried out which successfully restores the whole process. It is identified that the underlying forces are van der Waals and magnetic dipolar interactions. The latter is responsible for orientation of each particle during the whole process. This investigation leads to a better understanding of the formation mechanism of magnetic nanoparticle superlattice arrays., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)