Search

Emerging non-noble metal 2D catalysts, such as molybdenum disulfide (MoS 2 ), hold great promise in hydrogen evolution reactions. The sulfur vacancy is recognized as a key defect type that can activate the inert basal plane to improve the catalytic performance. Unfortunately, the method of introducing sulfur vacancies is limited and requires costly post-treatment processes. Here, a novel salt-assisted chemical vapor deposition (CVD) method is demonstrated for synthesizing ultrahigh-density vacancy-rich 2H-MoS 2 , with a controllable sulfur vacancy density of up to 3.35 × 10 14  cm -2 . This approach involves a pre-sprayed potassium chloridepromoter on the growth substrate. The generation of such defects is closely related to ion adsorption in the growth process, the unstable MoS 2 -K-H 2 O triggers the formation of sulfur vacancies during the subsequent transfer process, and it is more controllable and nondestructive when compared to traditional post-treatment methods. The vacancy-rich monolayer MoS 2 exhibits exceptional catalytic activity based on the microcell measurements, with an overpotential of ≈158.8 mV (100 mA cm -2 ) and a Tafel slope of 54.3 mV dec -1 in 0.5 m H 2 SO 4 electrolyte. These results indicate a promising opportunity for modulating sulfur vacancy defects in MoS 2 using salt-assisted CVD growth. This approach represents a significant leap toward achieving better control over the catalytic performances of 2D materials., (© 2023 Wiley‐VCH GmbH.)

The scalable 2D device fabrication and integration demand either the large-area synthesis or the post-synthesis transfer of 2D layers. While the direct synthesis of 2D materials on most targeted surfaces remains challenging, the transfer approach from the growth substrate onto the targeted surfaces offers an alternative pathway for applications and integrations. However, the current transfer techniques for 2D materials predominantly involve polymers and organic solvents, which are liable to contaminate or deform the ultrasensitive atomic layers. Here, novel ice-aided transfer and ice-stamp transfer methods are developed, in which water (ice) is the only medium in the entire process. In practice, the adhesion between various 2D materials and ice can be well controlled by temperature. Through such controlled adhesion of ice, it is shown that the new transfer methods can yield ultrahigh quality and exceptional cleanliness in transferred 2D flakes and continuous 2D films, and are applicable for a wide range of substrates. Furthermore, beyond transfer, ice can also be used for cleaning the surfaces of 2D materials at higher temperatures. These novel techniques can enable unprecedented ultraclean 2D materials surfaces and performances, and will contribute to the upcoming technological revolutions associated with 2D materials., (© 2023 Wiley-VCH GmbH.)

Kinetically inert metal complexes have arisen as promising alternatives to existing platinum and ruthenium chemotherapeutics. Reported herein, to our knowledge, is the first example of a substitutionally inert, Group 9 organometallic compound as a direct inhibitor of signal transducer and activator of transcription 3 (STAT3) dimerization. From a series of cyclometalated rhodium(III) and iridium(III) complexes, a rhodium(III) complex emerged as a potent inhibitor of STAT3 that targeted the SH2 domain and inhibited STAT3 phosphorylation and dimerization. Significantly, the complex exhibited potent anti-tumor activities in an in vivo mouse xenograft model of melanoma. This study demonstrates that rhodium complexes may be developed as effective STAT3 inhibitors with potent anti-tumor activity., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Kinetically inert Group 9 metal complexes have found emerging use as inhibitors of protein kinases or as modulators of protein-protein interactions. A series of cyclometalated rhodium(III) and iridium(III) complexes was investigated as inhibitors of mammalian target of rapamycin (mTOR) activity. Cell-free and cell-based experiments revealed rhodium(III) complex 1 to be a potent mTOR inhibitor (IC 50 =0.01 μM in the cell-free system), with potency comparable to that of rapamycin. The inhibition by complex 1 was found to be dependent on FK506-binding protein 12 (FKBP12), which suggests that complex 1 may behave as a modulator of the mTOR-FKBP12 interaction. Preliminary structure-activity relationships indicated that the donor ligand and the nature of the metal center are important determinants for mTOR inhibitory activity. Rhodium(III) complex 1 represents the first metal-based inhibitor of mTOR activity, and demonstrates the potential of kinetically inert Group 9 complexes as protein-protein interaction modulators., (Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The serendipitous discovery of the anticancer drug cisplatin cemented medicinal inorganic chemistry as an independent discipline in the 1960s. Luminescent metal complexes have subsequently been widely applied for sensing, bio-imaging, and in organic light-emitting diode applications. Transition-metal complexes possess a variety of advantages that make them suitable as therapeutics and as luminescent probes for biomolecules. It is thus highly desirable to develop new luminescent metal complexes that either interact with DNA through different binding modes or target alternative cellular machinery such as proteins as well as to provide a more effective means of monitoring disease progression. In this Review, we highlight recent examples of biologically active luminescent metal complexes that can target and probe a specific biomolecule, and offer insights into the future potential of these compounds for the investigation and treatment of human diseases., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The complexes [Pt(tBu(3)tpy){C[triple bond]C(C(6)H(4)C[triple bond]C)(n-1)R}](+) (n = 1: R = alkyl and aryl (Ar); n = 1-3: R = phenyl (Ph) or Ph-N(CH(3))(2)-4; n = 1 and 2, R = Ph-NH(2)-4; tBu(3)tpy = 4,4',4''-tri-tert-butyl-2,2':6',2''-terpyridine) and [Pt(Cl(3)tpy)(C[triple bond]CR)](+) (R = tert-butyl (tBu), Ph, 9,9'-dibutylfluorene, 9,9'-dibutyl-7-dimethyl-amine-fluorene; Cl(3)tpy = 4,4',4''-trichloro-2,2':6',2''-terpyridine) were prepared. The effects of substituent(s) on the terpyridine (tpy) and acetylide ligands and chain length of arylacetylide ligands on the absorption and emission spectra were examined. Resonance Raman (RR) spectra of [Pt(tBu(3)tpy)(C[triple bond]CR)](+) (R = n-butyl, Ph, and C(6)H(4)-OCH(3)-4) obtained in acetonitrile at 298 K reveal that the structural distortion of the C[triple bond]C bond in the electronic excited state obtained by 502.9 nm excitation is substantially larger than that obtained by 416 nm excitation. Density functional theory (DFT) and time-dependent DFT (TDDFT) calculations on [Pt(H(3)tpy)(C[triple bond]CR)](+) (R = n-propyl (nPr), 2-pyridyl (Py)), [Pt(H(3)tpy){C[triple bond]C(C(6)H(4)C[triple bond]C)(n-1)Ph}](+) (n = 1-3), and [Pt(H(3)tpy){C[triple bond]C(C(6)H(4)C[triple bond]C)(n-1)C(6)H(4)-N(CH(3))(2)-4}](+)/+H(+) (n = 1-3; H(3)tpy = nonsubstituted terpyridine) at two different conformations were performed, namely, with the phenyl rings of the arylacetylide ligands coplanar ("cop") with and perpendicular ("per") to the H(3)tpy ligand. Combining the experimental data and calculated results, the two lowest energy absorption peak maxima, lambda(1) and lambda(2), of [Pt(Y(3)tpy)(C[triple bond]CR)](+) (Y = tBu or Cl, R = aryl) are attributed to (1)[pi(C[triple bond]CR)-->pi*(Y(3)tpy)] in the "cop" conformation and mixed (1)[d(pi)(Pt)-->pi*(Y(3)tpy)]/(1)[pi(C[triple bond]CR)-->pi*(Y(3)tpy)] transitions in the "per" conformation. The lowest energy absorption peak lambda(1) for [Pt(tBu(3)tpy){C[triple bond]C(C(6)H(4)C[triple bond]C)(n-1)C(6)H(4)-H-4}](+) (n = 1-3) shows a redshift with increasing chain length. However, for [Pt(tBu(3)tpy){C[triple bond]C(C6H4C[triple bond]C)(n-1)C(6)H(4)-N(CH(3))(2)-4}](+) (n = 1-3), lambda(1) shows a blueshift with increasing chain length n, but shows a redshift after the addition of acid. The emissions of [Pt(Y(3)tpy)(C[triple bond]CR)](+) (Y = tBu or Cl) at 524-642 nm measured in dichloromethane at 298 K are assigned to the (3)[pi(C[triple bond]CAr)-->pi*(Y(3)tpy)] excited states and mixed (3)[d(pi)(Pt)-->pi*(Y(3)tpy)]/(3)[pi(C[triple bond]C)-->pi*(Y(3)tpy)] excited states for R = aryl and alkyl groups, respectively. [Pt(tBu(3)tpy){C[triple bond]C(C(6)H(4)C[triple bond]C)(n-1)C(6)H(4)-N(CH(3))(2)-4}](+) (n = 1 and 2) are nonemissive, and this is attributed to the small energy gap between the singlet ground state (S(0)) and the lowest triplet excited state (T(1)).

We report time-resolved resonance Raman spectra for the azirine intermediate produced in the 2-fluorenylnitrene ring-expansion reaction to form a dehydroazepine product. The Raman bands obtained with a 252.7 nm probe wavelength and 500 ns delay time exhibit reasonable agreement with predicted vibrational frequencies from density functional calculations for two isomers of azirine intermediates that may be formed from a 2-fluorenylnitrene precursor. The Raman bands observed for delay times of 15 ns and 10 micros were consistent with predicted vibrational frequencies from density functional calculations for the 2-fluorenylnitrene and dehydroazepine product species as well as previously reported 416 nm time-resolved Raman spectra obtained on the ns and micros time scales. Our results demonstrate that the 2-fluorenylnitrene ring-expansion reaction to produce dehydroazepine products proceeds via relatively long-lived 2-fluorenylnitrene and azirine intermediates. Substitution of a phenyl ring para to the nitrene group of phenylnitrene appears to lead to significant changes in the ring-expansion reaction so that longer lived arylnitrene and azirine intermediates can be observed. This should enable the chemical reactivity of azirine intermediates formed from arylnitrenes to be examined more readily.

We report time-resolved resonance Raman spectra for 2-fluorenylnitrene and its dehydroazepine products acquired after photolysis of 2-fluorenylnitrene in acetonitrile. The experimental Raman band frequencies exhibit good agreement with the calculated vibrational frequencies from UBPW91/cc-PVDZ density functional calculations for the singlet and triplet states of the 2-fluorenylnitrene as well as BPW91/cc-PVDZ calculations for the two dehydroazepine ring-expansion product species. The decay of the 2-fluorenylnitrene Raman signal and the appearance of the dehydroazepine products suggest the presence of an intermediate species (probably an azirine) that does not absorb very much at the 416 nm probe wavelength used in the time-resolved resonance Raman experiments. Comparison of the singlet 2-fluorenylnitrene species with the singlet 2-fluorenylnitrenium ion species indicates that protonation of the nitrene to give the nitrenium ion leads to a significant enhancement of the cyclohexadienyl character of the phenyl rings without much change of the C-N bond length.

We present transient-resonance Raman spectra for the 4-biphenylylnitrenium, diphenylnitrenium, and 2-fluorenylnitrenium ions. These spectra display a number of fundamental vibrational bands whose frequencies exhibit good agreement with those computed using BPW91/cc-PVDZ density functional theory calculations for the singlet ground states of the 4-biphenylylnitrenium, diphenylnitrenium, and 2-fluorenylnitrenium ions. Comparison of these arylnitrenium ions with each other and with previous results for structurally similar biphenyl radical cations indicates that the degree of iminocyclohexadienyl character observed in these arylnitrenium ions depends on the relative orientation of the two phenyl rings, the nature of the nitrenium ion moiety, and the ability of the biphenyl-like group to accommodate positive charge through formation of a more planar-like structure with quinoidal-like character.