Search

Here we disclose that spiropyrans are able to undergo dynamic covalent exchange via their corresponding merocyanine isomers. In the latter, the indolinium moieties can be exchanged by a Michael-type addition-elimination sequence, in which a methylene indoline attacks a merocyanine and subsequently the initial indoline fragment is cleaved. The rate and position of the exchange equilibrium strongly depend on the reaction conditions as well as the substitution pattern on the methylene indoline fragments. Importantly, spiropyran cross exchange is catalyzed by indolinium salts and provides the opportunity for rapid in situ structural diversification of spiropyrans. This was used as synthetic tool to access various, hitherto inaccessible spiropyrans as potential dual-color photoinitiators for xolography. Moreover, we foresee application to screen dynamic covalent libraries of spiropyrans for photochromic properties and to exploit their light-sensitivity to bias the thermal equilibrium., (© 2025 The Author(s). Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Organic/inorganic hybrid systems offer great potential for novel solar cell design combining the tunability of organic chromophore absorption properties with high charge carrier mobilities of inorganic semiconductors. However, often such material combinations do not show the expected performance: while ZnO, for example, basically exhibits all necessary properties for a successful application in light-harvesting, it was clearly outpaced by TiO 2 in terms of charge separation efficiency. The origin of this deficiency has long been debated. This study employs femtosecond time-resolved photoelectron spectroscopy and many-body ab initio calculations to identify and quantify all elementary steps leading to the suppression of charge separation at an exemplary organic/ZnO interface. It is demonstrated that charge separation indeed occurs efficiently on ultrafast (350 fs) timescales, but that electrons are recaptured at the interface on a 100 ps timescale and subsequently trapped in a strongly bound (0.7 eV) hybrid exciton state with a lifetime exceeding 5 µs. Thus, initially successful charge separation is followed by delayed electron capture at the interface, leading to apparently low charge separation efficiencies. This finding provides a sufficiently large time frame for counter-measures in device design to successfully implement specifically ZnO and, moreover, invites material scientists to revisit charge separation in various kinds of previously discarded hybrid systems., (© 2024 The Author(s). Advanced Science published by Wiley‐VCH GmbH.)

Natural photoactive systems have evolved to harness broad-spectrum light from solar radiation for critical functions such as light perception and photosynthetic energy conversion. Molecular photoswitches, which undergo structural changes upon light absorption, are artificial photoactive tools widely used for developing photoresponsive systems and converting light energy. However, photoswitches generally need to be activated by light of specific narrow wavelength ranges for effective photoconversion, which limits their ability to directly work under sunlight and to efficiently harvest solar energy. Here, focusing on azo-switches-the most extensively studied photoswitches, we demonstrate effective solar E→Z photoisomerization with photoconversions exceeding 80 % under unfiltered sunlight. These sunlight-driven azo-switches are developed by rendering the absorption of E isomers overwhelmingly stronger than that of Z isomers across a broad ultraviolet to visible spectrum. This unusual type of spectral profile is realized by a simple yet highly adjustable molecular design strategy, enabling the fine-tuning of spectral window that extends light absorption beyond 600 nm. Notably, back-photoconversion can be achieved without impairing the forward solar isomerization, resulting in unique light-reversible solar switches. Such exceptional solar chemistry of photoswitches provides unprecedented opportunities for developing sustainable light-driven systems and efficient solar energy technologies., (© 2024 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

The artificial brain is conceived as advanced intelligence technology, capable to emulate in-memory processes occurring in the human brain by integrating synaptic devices. Within this context, improving the functionality of synaptic transistors to increase information processing density in neuromorphic chips is a major challenge in this field. In this article, Li-ion migration promoting long afterglow organic light-emitting transistors, which display exceptional postsynaptic brightness of 7000 cd m -2 under low operational voltages of 10 V is presented. The postsynaptic current of 0.1 mA operating as a built-in threshold switch is implemented as a firing point in these devices. The setting-condition-triggered long afterglow is employed to drive the photoisomerization process of photochromic molecules that mimic neurotransmitter transfer in the human brain for realizing a key memory rule, that is, the transition from long-term memory to permanent memory. The combination of setting-condition-triggered long afterglow with photodiode amplifiers is also processed to emulate the human responding action after the setting-training process. Overall, the successful integration in neuromorphic computing comprising stimulus judgment, photon emission, transition, and encoding,  to emulate the complicated decision tree of the human brain is demonstrated., (© 2024 The Authors. Advanced Materials published by Wiley‐VCH GmbH.)

Emerging applications of photochromic compounds demand new molecular designs that can be inspired by some long-known yet currently forgotten classes of photoswitches. In the present review, we remind the community about Peri-AryloxyQuinones (PAQs) and their unique photoswitching behavior originally discovered more than 50 years ago. At the heart of this phenomenon is the light-induced migration of an aromatic moiety (arylotropy) in peri-aryloxy-substituted quinones resulting in ana-quinones. PAQs feature absorbance of both isomers in the visible spectral region, photochromism in the amorphous and crystalline state, and thermal stability of the photogenerated ana-isomer. Particularly noticeable is the high sensitivity of the ana-isomer towards nucleophiles in solution. In addition to the mechanism of molecular photochromism and the underlaying structure-switch relationships, we analyze potential applications and prospects of aryloxyquinones in optically switchable materials and devices. Due to their ability to efficiently photoswitch in the solid state, PAQs are indeed attractive candidates for such materials and devices, including electronics (optically controllable circuits, switches, transistors, memories, and displays), porous crystalline materials, crystalline actuators, photoactivated sensors, and many more. This review is intended to serve as a guide for researchers who wish to use photoswitchable PAQs in the development of new photocontrollable materials, devices, and processes., (© 2023 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

The exceptional thermal stability of diarylethene closed isomers enabled many applications but also prevented utilization in photochromic systems that require rapid thermal reversibility. Herein, we report the diaryltriazolium (DAT + ) photoswitch undergoing thermal cycloreversion within a few milliseconds and absorption of the closed form in the near-infrared region above 900 nm. Click chemistry followed by alkylation offers modular and fast access to the electron-deficient DAT + scaffold. In addition to excellent fatigue resistance, the introduced charge increases water solubility, rendering this photoswitch an ideal candidate for exploring biological applications., (© 2023 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Additive manufacturing techniques continue to improve in resolution, geometrical freedom, and production rates, expanding their application range in research and industry. Most established techniques, however, are based on layer-by-layer polymerization processes, leading to an inherent trade-off between resolution and printing speed. Volumetric 3D printing enables the polymerization of freely defined volumes allowing the fabrication of complex geometries at drastically increased production rates and high resolutions, marking the next chapter in light-based additive manufacturing. This work advances the volumetric 3D printing technique xolography to a continuous process. Dual-color photopolymerization is performed in a continuously flowing resin, inside a tailored flow cell. Supported by simulations, the flow profile in the printing area is flattened, and resin velocities at the flow cell walls are increased to minimize unwanted polymerization via laser sheet-induced curing. Various objects are printed continuously and true to shape with smooth surfaces. Parallel object printing paves the way for up-scaling the continuous production, currently reaching production rates up to 1.75 mm 3  s -1 for the presented flow cell. Xolography in flow provides a new opportunity for scaling up volumetric 3D printing with the potential to resolve the trade-off between high production rates and high resolution in light-based additive manufacturing., (© 2023 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

Indigo, one of the most ancient and abundant dyes in human history, has recently emerged as a potential functional motif due to its intriguing photochemical properties. This review aims to provide insights into both the preparation of these molecules and their utilization in molecular systems. First, the synthesis of the indigo core as well as available methods to derivatize indigo are described to outline synthetic strategies to build the desired molecular structures. Then, the photochemical behavior of indigos is discussed, with particular focus on E-Z photoisomerization and photoinduced electron transfer. Connections between the molecular structures and their photochemical properties are highlighted and serve as guiding principles for designing indigos to be applied as photoresponsive tools., (© 2023 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Vinylene-linked two-dimensional conjugated covalent organic frameworks (V-2D-COFs), belonging to the class of two-dimensional conjugated polymers, have attracted increasing attention due to their extended π-conjugation over the 2D backbones associated with high chemical stability. The Knoevenagel polycondensation has been demonstrated as a robust synthetic method to provide cyano (CN)-substituted V-2D-COFs with unique optoelectronic, magnetic, and redox properties. Despite the successful synthesis, it remains elusive for the relevant polymerization mechanism, which leads to relatively low crystallinity and poor reproducibility. In this work, we demonstrate the novel synthesis of CN-substituted V-2D-COFs via the combination of Knoevenagel polycondensation and water-assisted dynamic Michael-addition-elimination, abbreviated as KMAE polymerization. The existence of C=C bond exchange between two diphenylacrylonitriles (M1 and M6) is firstly confirmed via in situ high-temperature NMR spectroscopy study of model reactions. Notably, the intermediate M4 synthesized via Michael-addition can proceed the Michael-elimination quantitatively, leading to an efficient C=C bond exchange, unambiguously confirming the dynamic nature of Michael-addition-elimination. Furthermore, the addition of water can significantly promote the reaction rate of Michael-addition-elimination for highly efficient C=C bond exchange within 5 mins. As a result, the KMAE polymerization provides a highly efficient strategy for the synthesis of CN-substituted V-2D-COFs with high crystallinity, as demonstrated by four examples of V-2D-COF-TFPB-PDAN, V-2D-COF-TFPT-PDAN, V-2D-COF-TFPB-BDAN, and V-2D-COF-HATN-BDAN, based on the simulated and experimental powder X-ray diffraction (PXRD) patterns as well as N 2 -adsorption-desorption measurements. Moreover, high-resolution transmission electron microscopy (HR-TEM) analysis shows crystalline domain sizes ranging from 20 to 100 nm for the newly synthesized V-2D-COFs., (© 2022 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

N,N'-disubstituted indigos are photoswitchable molecules that have recently caught the attention due to their addressability by red-light. When alkyl and aryl groups are utilized as the N-substituents, the thermal half-lives of Z isomers can be tuned independently while maintaining the advantageous red-shifted absorption spectra. To utilize these molecules in real-world applications, it is of immense importance to understand how their molecular structures as well as the environment influence their switching properties. To this end, we probed their photoisomerization mechanism by carrying out photophysical and computational studies in solvents of different polarities. The fluorescence and transient absorption experiments suggest for more polar excited and transition states, which explains the bathochromic shifts of absorption spectra and shorter thermal half-lives. On the other hand, the quantum chemical calculations reveal that in contrast to N-carbonyl groups, N-alkyl and N-aryl substituents are not strongly conjugated with the indigo chromophore and can thus serve as a tool for tuning the thermal stability of Z isomers. Both approaches are combined to provide in-depth understandings of how indigos undergo photoswitching as well as how they are influenced by N-substituent and the chemical surroundings. These mechanistic insights will serve as guiding principles for designing molecules eyeing broader applications., (© 2022 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Liquid-phase, quasi-epitaxial growth is used to stack asymmetric, dipolar organic compounds on inorganic substrates, permitting porous, crystalline molecular materials that lack inversion symmetry. This allows material fabrication with built-in electric fields. A new programmed assembly strategy based on metal-organic frameworks (MOFs) is described that facilitates crystalline, noncentrosymmetric space groups for achiral compounds. Electric fields are integrated into crystalline, porous thin films with an orientation normal to the substrate. Changes in electrostatic potential are detected via core-level shifts of marker atoms on the MOF thin films and agree with theoretical results. The integration of built-in electric fields into organic, crystalline, and porous materials creates possibilities for band structure engineering to control the alignment of electronic levels in organic molecules. Built-in electric fields may also be used to tune the transfer of charges from donors loaded via programmed assembly into MOF pores. Applications include organic electronics, photonics, and nonlinear optics, since the absence of inversion symmetry results in a clear second-harmonic generation signal., (© 2021 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

The successive auration of p-tert-butyltetramercaptotetrathiacalix[4]arene, H 4 (MTC[4]), with gold(I) phosphine units was investigated. Through deprotonation with NaOMe, followed by salt metathesis reactions with (PR 3 )AuCl (R=Me, Ph) complexes with two and three [(PR 3 )Au] + moieties could be prepared and isolated, namely [(Ph 3 PAu) 2 H 2 (MTC[4])] and [(Me 3 PAu) 3 H(MTC[4])]. In [(Me 3 PAu) 3 H(MTC[4])] two gold atoms already come close enough to undergo aurophilic interactions. To introduce a fourth [(PR 3 )Au] + entity TlOEt had to be used for the deprotonation, which led to the finding that four gold atoms organised by the (MTC[4]) 4- coordination platform are able to bind and stabilize a TlCl entity, yielding [(Me 3 PAu) 4 TlCl(MTC[4])]. As evidenced by structural and theoretical investigations the binding occurs through strong metallophilic interactions, which lead to photoluminescence at low temperatures., (© 2021 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Organic transistors are key elements for flexible, wearable, and biocompatible logic applications. Multiresponsivity is highly sought-after in organic electronics to enable sophisticated operations and functions. Such a challenge can be pursued by integrating more components in a single device, each one responding to a specific external stimulus. Here, the first multiresponsive organic device based on a photochromic-ferroelectric organic field-effect transistor, which is capable of operating as nonvolatile memory with 11 bit memory storage capacity in a single device, is reported. The memory elements can be written and erased independently by means of light or an electric field, with accurate control over the readout signal, excellent repeatability, fast response, and high retention time. Such a proof of concept paves the way toward enhanced functional complexity in optoelectronics via the interfacing of multiple components in a single device, in a fully integrated low-cost technology compatible with flexible substrates., (© 2021 Wiley-VCH GmbH.)

We present a strategy to achieve highly cooperative photoswitching, where the initial switching event greatly facilitates subsequent switching of the neighboring unit. By linking donor/acceptor substituted dihydropyrenes via suitable π-conjugated bridges, the quantum yield of the second photochemical ring-opening process could be enhanced by more than two orders of magnitude as compared to the first ring-opening. As a result, the intermediate mixed switching state is not detected during photoisomerization although it is formed during the thermal back reaction. Comparing the switching behavior of various dimers, both experimentally and computationally, helped to unravel the crucial role of the bridging moiety connecting both photochromic units. The presented dihydropyrene dimer serves as model system for longer cooperative switching chains, which, in principle, should enable efficient and directional transfer of information along a molecularly defined path. Moreover, our concept allows to enhance the photosensitivity in oligomeric and polymeric systems and materials thereof., (© 2020 The Authors. Published by Wiley-VCH GmbH.)

Proton-responsive photochromic molecules are attractive for their ability to react on non-invasive rapid optical stimuli and the importance of protonation/deprotonation processes in various fields. Conventionally, their acidic/basic sites are on hetero-atoms, which are orthogonal to the photo-active π-center. Here, we incorporate azulene, an acid-sensitive pure hydrocarbon, into the skeleton of a diarylethene-type photoswitch. The latter exhibits a novel proton-gated negative photochromic ring-closure and its optical response upon protonation in both open and closed forms is much more pronounced than those of diarylethene photoswitches with hetero-atom based acidic/basic moieties. The unique behavior of the new photoswitch can be attributed to direct protonation on its π-system, supported by 1 H NMR and theoretical calculations. Our results demonstrate the great potential of integrating non-alternant hydrocarbons into photochromic systems for the development of multi-responsive molecular switches., (© 2020 The Authors. Published by Wiley-VCH GmbH.)

Van der Waals heterostructures (VDWHs), obtained via the controlled assembly of 2D atomically thin crystals, exhibit unique physicochemical properties, rendering them prototypical building blocks to explore new physics and for applications in optoelectronics. As the emerging alternatives to graphene, monolayer transition metal dichalcogenides and bottom-up synthesized graphene nanoribbons (GNRs) are promising candidates for overcoming the shortcomings of graphene, such as the absence of a bandgap in its electronic structure, which is essential in optoelectronics. Herein, VDWHs comprising GNRs onto monolayer MoS 2 are fabricated. Field-effect transistors (FETs) based on such VDWHs show an efficient suppression of the persistent photoconductivity typical of MoS 2 , resulting from the interfacial charge transfer process. The MoS 2 -GNR FETs exhibit drastically reduced hysteresis and more stable behavior in the transfer characteristics, which is a prerequisite for the further photomodulation of charge transport behavior within the MoS 2 -GNR VDWHs. The physisorption of photochromic molecules onto the MoS 2 -GNR VDWHs enables reversible light-driven control over charge transport. In particular, the drain current of the MoS 2 -GNR FET can be photomodulated by 52%, without displaying significant fatigue over at least 10 cycles. Moreover, four distinguishable output current levels can be achieved, demonstrating the great potential of MoS 2 -GNR VDWHs for multilevel memory devices., (© 2020 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Operating photoswitchable molecules repetitively and reliably is crucial for most of their applications, in particular in (opto)electronic devices, and related to reversibility and fatigue resistance, which both critically depend on the photoisomerization mechanism defined by the substitution pattern. Two diarylethene photoswitches bearing biacetyl triplet sensitizers either at the periphery or at the core were investigated using both stationary as well as transient UV/Vis absorption spectroscopy ranging from the femtosecond to the microsecond time scale. The diarylethene with two biacetyl moieties at the periphery is switching predominantly from the triplet excited state, giving rise to an enhanced fatigue resistance. In contrast, the diarylethene bearing one diketone at the photoreactive inner carbon atom cyclizes from the singlet excited state and shows significantly higher quantum yields for both cyclization and cycloreversion., (© 2020 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.)

Incorporating molecular photoswitches into various materials provides unique opportunities for controlling their properties and functions with high spatiotemporal resolution using remote optical stimuli. The great and largely still untapped potential of these photoresponsive systems has not yet been fully exploited due to the fundamental challenges in harnessing geometrical and electronic changes on the molecular level to modulate macroscopic and bulk material properties. Herein, progress made during the past decade in the field of photoswitchable materials is highlighted. After pointing to some general design principles, materials with an increasing order of the integrated photoswitchable units are discussed, spanning the range from amorphous settings over surfaces/interfaces and supramolecular ensembles, to liquid crystalline and crystalline phases. Finally, some potential future directions are pointed out in the conclusion. In view of the exciting recent achievements in the field, the future emergence and further development of light-driven and optically programmable (inter)active materials and systems are eagerly anticipated., (© 2020 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The interfacing of 2D materials (2DMs) with photochromic molecules provides an efficient solution to reversibly modulate their outstanding electronic properties and offers a versatile platform for the development of multifunctional field-effect transistors (FETs). Herein, optically switchable multilevel high-mobility FETs based on few-layer ambipolar WSe 2 are realized by applying on its surface a suitably designed bicomponent diarylethene (DAE) blend, in which both hole and electron transport can be simultaneously modulated for over 20 cycles. The high output current modulation efficiency (97% for holes and 52% for electrons) ensures 128 distinct current levels, corresponding to a data storage capacity of 7 bit. The device is also implemented on a flexible and transparent poly(ethylene terephthalate) substrate, rendering 2DM/DAE hybrid structures promising candidates for flexible multilevel nonvolatile memories., (© 2020 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A two-component core-shell UiO-68 type metal-organic framework (MOF) with a nonfunctionalized interior for efficient guest uptake and storage and a thin light-responsive outer shell was prepared by initial solvothermal MOF synthesis followed by solvent-assisted linker exchange. The bulky shell linker features two tetra-ortho-fluorinated azobenzene moieties to exploit their advantageous photoisomerization properties. The obtained perfect octahedral MOF single crystals can be switched repeatedly and with an unprecedented efficiency between E- and Z-rich states using visible light only. Due to the high photoswitch density per pore of the shell layer, its steric demand and thus molecular uptake (and release) can be conveniently modulated upon green and blue light irradiation. Therefore, the "smart" shell acts as a light-controlled kinetic barrier or "gate" for the diffusion of cargo molecules in and out of the MOF crystals., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The controlled functionalization of semiconducting 2D materials (2DMs) with photoresponsive molecules enables the generation of novel hybrid structures as active components for the fabrication of high-performance multifunctional field-effect transistors (FETs) and memories. This study reports the realization of optically switchable FETs by decorating the surface of the semiconducting 2DMs such as WSe 2 and black phosphorus with suitably designed diarylethene (DAE) molecules to modulate their electron and hole transport, respectively, without sacrificing their pristine electrical performance. The efficient and reversible photochemical isomerization of the DAEs between the open and the closed isomer, featuring different energy levels, makes it possible to generate photoswitchable charge trapping levels, resulting in the tuning of charge transport through the 2DMs by alternating illumination with UV and visible light. The device reveals excellent data-retention capacity combined with multiple and well-distinguished accessible current levels, paving the way for its use as an active element in multilevel memories., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The spatial confinement of multivalent azopyridine guest molecules mediated by cucurbit[8]urils is described. Fluorescent dye-labelled multivalent azopyridine molecules were attached to preformed methyl viologen/cucurbit[8]uril inclusion complexes in solution and at surfaces. The formation of the resulting heteroternary host-guest complexes was verified in solution and on gold substrates. Surface binding constants of the multivalent ligands were two orders of magnitude higher than that of the monovalent one. Poly-l-lysine grafted with oligo(ethylene glycol) and maleimide moieties was deposited on cyclic olefin polymer surfaces and further modified with thiolated methyl viologen and cucurbit[8]uril. Defined micrometer-sized patterns were created by soft lithographic techniques. Supramolecular exchange experiments were performed on these surface-bound heterocomplexes, which allowed the creation of cross-patterns by taking advantage of the molecular valency, which led to the substitution of the monovalent guest by the multivalent guests but not vice versa., (©2019 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.)

The transfer of stereoinformation is at the heart of asymmetric reactions. By incorporating the natural monoterpene l-menthone into the backbone of a diarylethene, we achieved efficient chirality transfer upon photocyclization, resulting in the preferred formation of one major closed isomer in a diastereomeric ratio (d.r.) of 85:15. More significantly, we were able to completely reverse the diastereomeric outcome of the ring closure simply by altering the chemical environment or the irradiation conditions. As a result, we could selectively accumulate the less favored minor closed isomer, with remarkable d.r. values of >99:1 and 74:26, respectively. Computations revealed that a stability inversion after photocyclization is the basis for the observed unprecedented control over diastereoselectivity., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Light responsive materials that are able to change their shape are becoming increasingly important. However, preconfigurable bistable or even multi-stable visible light responsive coatings have not been reported yet. Such materials will require less energy to actuate and will have a longer lifetime. Here, it is shown that fluorinated azobenzenes can be used to create rewritable and pre-configurable responsive surfaces that show multi-stable topographies. These surface structures can be formed and removed by using low intensity green and blue light, respectively. Multistable preconfigured surface topographies can also be created in the absence of a mask. The method allows for full control over the surface structures as the topographical changes are directly linked to the molecular isomerization processes. Preliminary studies reveal that these light responsive materials are suitable as adaptive biological surfaces., (© 2018 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A novel methodology for printing 3D objects with spatially resolved mechanical and chemical properties is reported. Photochromic molecules are used to control polymerization through coherent bleaching fronts, providing large depths of cure and rapid build rates without the need for moving parts. The coupling of these photoswitches with resin mixtures containing orthogonal photo-crosslinking systems allows simultaneous and selective curing of multiple networks, providing access to 3D objects with chemically and mechanically distinct domains. The power of this approach is showcased through the one-step fabrication of bioinspired soft joints and mechanically reinforced "brick-and-mortar" structures., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Biomembranes are constantly remodeled and in cells, these processes are controlled and modulated by an assortment of membrane proteins. Here, it is shown that such remodeling can also be induced by photoresponsive molecules. The morphological control of giant vesicles in the presence of a water-soluble ortho -tetrafluoroazobenzene photoswitch (F-azo) is demonstrated and it is shown that the shape transformations are based on an increase in membrane area and generation of spontaneous curvature. The vesicles exhibit budding and the buds can be retracted by using light of a different wavelength. In the presence of F-azo, the membrane area can increase by more than 5% as assessed from vesicle electrodeformation. To elucidate the underlying molecular mechanism and the partitioning of F-azo in the membrane, molecular dynamics simulations are employed. Comparison with theoretically calculated shapes reveals that the budded shapes are governed by curvature elasticity, that the spontaneous curvature can be decomposed into a local and a nonlocal contribution, and that the local spontaneous curvature is about 1/(2.5 µm). The results show that exo- and endocytotic events can be controlled by light and that these photoinduced processes provide an attractive method to change membrane area and morphology.

Photoswitchable acid-base pairs, whose pK a values can be reversibly altered, are attractive molecular tools to control chemical and biological processes with light. A significant, light-induced pK a change of three units in aqueous medium has been realized for two thermally stable states, which can be interconverted using UV and green light. The light-induced pK a modulation is based on incorporating a 3-H-thiazol-2-one moiety into the framework of a diarylethene photoswitch, which loses the heteroaromatic stabilization of the negatively charged conjugate base upon photochemical ring closure, and hence becomes significantly less acidic. In addition, the efficiency of the photoreactions is drastically increased in the deprotonated state, giving rise to catalytically enhanced photochromism. It appears that protonation has a significant influence on the shape of the ground- and excited-state potential energy surfaces, as indicated by quantum-chemical calculations., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Two novel bis(triazolyl)carbazole ligands Hbtc1 (3,6-di(tert-butyl)-1,8-bis[(1-(3,5-di(tert-butyl)phenyl)-1,2,3-triazol-4-yl)]-9H-carbazole) and Hbtc2 (3,6-di(tert-butyl)-1,8-bis[(4-(3,5-di(tert-butyl)phenyl)-1,2,3-triazol-1-yl)]-9H-carbazole), differing in the regiochemistry of triazole attachment, have been synthesized by Cu-catalyzed azide-alkyne cycloaddition, the so-called "click-reactions". Metalation with Ru, Zn, and Ni precursors led to the formation of M(btc) 2 complexes (M=Ru, Zn, Ni), with two deprotonated ligands coordinating to the metal center in tridentate fashion, forming almost perfectly octahedral coordination spheres. The redox properties of M(btc) 2 complexes have been investigated by cyclic voltammetry, UV/Vis spectroscopy, spectroelectrochemistry, and chemically. The CV of the ruthenium complexes revealed three quasi-reversible one-electron oxidation processes, one assigned as the Ru II/III couple and two originating from ligand-based oxidations. The CVs of both Zn and Ni complexes contained only two oxidation waves corresponding to the oxidation of the two ligands. The oxidation potentials of complexes derived from Hbtc1 ligands were found to be 300-400 mV lower than those of the corresponding complexes derived from Hbtc2, reflecting the significant difference in donation through the N(2) or N(3) atom of the triazole moiety., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The success of photopharmacology is inevitably tied to the availability of photoswitches, which can be operated within the biological window (λ=650-1450 nm) to maximize penetration in tissue. A general design strategy has been devised and a dihydropyrene derivative is described here that displays negative T-type photochromism, allowing for efficient and nearly quantitative (95 %) switching induced by NIR light λ>800 nm. The thermal half-life of the decolored ring-open meta-cyclophanediene isomer ranges from minutes to hours, depending on the solvent polarity and hence serves as a probe of the local environment. Due to the rather subtle geometrical differences between the two isomers, suitably modified NIR photoswitches are potential candidates for switching when bound in the pocket of the biological target, in principle allowing for reversible light-induced inhibitor deactivation as an alternative approach to externally regulate biological functions., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

To reduce the environmental footprint of the modern society, it is desirable to elongate the lifetime of consumer products, for example by implementing healable coatings and protective layers. However, since most healing processes carried out by heat or light suffer from material degradation, improving the robustness and integrity of healable materials is of tremendous importance to prolong their lifetime. In recent work, a prototype is created of a dynamic covalent polymer network, whose thermal healing ability can be switched "on" and "off" by light to provide a means to locally control repair of a damaged coating. Based on the initial concept, herein a new set of difunctional crosslinkers and linear polymers of various compositions is presented to form dynamic covalent polymer networks, in which the barrier for the retro Diels-Alder decrosslinking reaction is decreased. The approach results in lower healing temperatures and thus a longer lifetime of the material., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A series of 3,6-bis(4-triazolyl)pyridazines equipped with terminal phenyl substituents with varying degree of fluorination were synthesized by using the facile copper-catalyzed azide-alkyne cycloaddition and their structures were thoroughly investigated in the gas phase, in solution, and in the solid state by employing DFT calculations, NMR spectroscopy, and single-crystal X-ray diffraction, respectively. On the molecular level, their structure is governed by the strong preference of the triazole-pyridazine linkages for the anti-conformation. The supramolecular organization of the molecules in the crystalline solid is controlled by π-stacking, C-H⋅⋅⋅π as well as C-F⋅⋅⋅H interactions. The latter can conveniently be tuned by the number and position of fluorine substituents in the terminal phenyl units, giving rise to either herringbone-like, 1D or 2D lamellar packing. Electrochemistry and optical spectroscopy of all compounds suggest that they might find use as electron-transporting/hole-blocking materials in organic electronics., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

To improve the sensitized Z→E photoisomerization of azobenzenes, and circumvent the threshold concentration necessary for the bimolecular photoinduced electron transfer reaction to generate the rapidly isomerizing Z-azobenzene radical anion, an Ir III complex with a covalently tethered azobenzene fragment was synthesized. Selective irradiation of the 1 MLCT band of the Ir III complex induced an efficiently sensitized photoswitching of the dyad over a wide concentration range and even at high dilution., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The photoswitchable piperidine general base catalyst is a prototype structure for light control of catalysis. Its azobenzene moiety moves sterically shielding groups to either protect or expose the active site, thereby changing the basicity and hydrogen-bonding affinity of the compound. The reversible switching dynamics of the catalyst is probed in the infrared spectral range by monitoring hydrogen bond (HB) formation between its active site and methanol (MeOH) as HB donor. Steady-state infrared (IR) and ultrafast IR and UV/Vis spectroscopies are used to uncover ultrafast expulsion of MeOH from the active site within a few picoseconds. Thus, the force generated by the azobenzene moiety even in the final phase of its isomerization is sufficient to break a strong HB within 3 ps and to shut down access to the active site., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Although aromaticity is a key concept in chemistry that is frequently used to explain the structure and reactivity of organic compounds, it remains challenging to actually measure this property. Proper probes allow for an experimental quantification of aromaticity using nuclear magnetic resonance (NMR) spectroscopy and in this study 15,16-dimethyl-15,16-dihydropyrene (DHP) is demonstrated to be particularly well suited for this purpose. DHP has two internal methyl groups, which are positioned within the π cloud of this bridged, planar, and rigid [14]annulene, and are therefore shifted to higher field in proton NMR spectra owing to ring-current effects. A specific DHP derivative bearing strongly electron-donating dimethylamino and strongly electron-accepting nitro groups in a relative pseudo-para orientation has been synthesized and characterized with respect to its quinoid character. Solvatochromism as well as a reduced ring current show that the partial quinoid character in this push-pull DHP derivative is about 12 %. This study extends the scope of DHP as an aromaticity probe and aids in the better understanding of the phenomenon of aromaticity., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Among bistable photochromic molecules, diarylethenes (DAEs) possess the distinct feature that upon photoisomerization they undergo a large modulation of their π-electronic system, accompanied by a marked shift of the HOMO/LUMO energies and hence oxidation/reduction potentials. The electronic modulation can be utilized to remote-control charge- as well as energy-transfer processes and it can be transduced to functional entities adjacent to the DAE core, thereby regulating their properties. In order to exploit such photoswitchable systems it is important to precisely adjust the absolute position of their HOMO and LUMO levels and to maximize the extent of the photoinduced shifts of these energy levels. Here, we present a comprehensive study detailing how variation of the substitution pattern of DAE compounds, in particular using strongly electron-accepting and chemically stable trifluoromethyl groups either in the periphery or at the reactive carbon atoms, allows for the precise tuning of frontier molecular orbital levels over a broad energy range and the generation of photoinduced shifts of more than 1 eV. Furthermore, the effect of different DAE architectures on the transduction of these shifts to an adjacent functional group is discussed. Whereas substitution in the periphery of the DAE motif has only minor implications on the photochemistry, trifluoromethylation at the reactive carbon atoms strongly disturbs the isomerization efficiency. However, this can be overcome by using a nonsymmetrical substitution pattern or by combination with donor groups, rendering the resulting photoswitches attractive candidates for the construction of remote-controlled functional systems., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Our new, simple, and accurate colorimetric method is based on diarylethenes (DAEs) for the rapid detection of a wide range of primary and secondary amines. The probes consist of aldehyde- or ketone-substituted diarylethenes, which undergo an amine-induced decoloration reaction, selectively to give the ring-closed isomer. Thus, these probes can be activated at the desired moment by light irradiation, with a sensitivity that allows the detection of amines at concentrations as low as 10 -6  m in solution. In addition, the practical immobilization of DAEs on paper makes it possible to detect biogenic amines, such as cadaverine, in the gas phase above a threshold of 12 ppbv within 30 seconds., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The covalent linking of molecular building blocks on surfaces enables the construction of specific molecular nanostructures of well-defined shape. Molecular nodes linked to various entities play a key role in such networks, but represent a particular challenge because they require a well-defined arrangement of different building blocks. Herein, we describe the construction of a chemically and geometrically well defined covalent architecture made of one central node and three molecular wires arranged in a nonsymmetrical way and thus encoding different conjugation pathways. Very different architectures of either very limited or rather extended size were obtained depending on the building blocks used for the covalent linking process on the Au(111) surface. Electrical measurements were carried out by pulling individual molecular nodes with the tip of a scanning tunneling microscope. The results of this challenging procedure indicate subtle differences if the nodes are contacted at inequivalent termini., (© 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Various aldehyde-containing photoswitches have been developed whose reactivity toward amines can be controlled externally. A thermally stable bifunctional diarylethene, which in its ring-closed form exhibits imine formation accelerated by one order of magnitude, was used as a photoswitchable crosslinker and mixed with a commercially available amino-functionalized polysiloxane to yield a rubbery material with viscoelastic and self-healing properties that can be reversibly tuned by irradiation., (© 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

High fatigue resistance, bistability, and drastic property changes among isomers allow efficient modulation of the current output of organic thin-film transistors (OTFTs) to be obtained by a photogating of the charge-injection mechanism., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Two-NIR-photon-triggered Z→E isomerization of an azobenzene was accomplished by covalently linking a two-photon-harvesting triarylamine antenna to a thermally stable ortho-fluorinated azobenzene derivative. The obtained photoswitch is fully addressable with visible and NIR light by using one-photon and two-photon excitation, respectively, with the latter offering enhanced penetration depth and improved spatial resolution., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The extent of electronic coupling between a boron dipyrromethene (BODIPY) fluorophore and a diarylethene (DAE) photoswitch has been modulated in a covalently linked molecular dyad by irradiation with either UV or visible light. In the open isomer, both moieties can be regarded as individual chromophores, while in the closed form the lowest electronic (S0 →S1 ) transition of the dyad is slightly shifted, enabling photomodulation of its fluorescence. Transient spectroscopy confirms that the dyad behaves dramatically different in the two switching states: while in the open isomer it resembles an undisturbed BODIPY fluorophore, in the closed isomer no fluorescence occurs and instead a red-shifted DAE behavior prevails., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A diarylethene photoswitch was covalently connected to two small triplet sensitizer moieties in a conjugated and nonconjugated fashion and the photochromic performance of the resulting compounds was investigated. In comparison with the parent diarylethene (without sensitizers) and one featuring saturated linkages, the conjugated photoswitch offers superior fatigue resistance upon visible-light excitation due to effective triplet energy transfer from the biacetyl termini to the diarylethene core. Our design makes it possible to switch diarylethenes with visible light in both directions in a highly efficient and robust fashion based on extending π-conjugation and by-product-free ring-closure via the triplet manifold., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The ability to control the interplay of materials with low-energy photons is important as visible light offers several appealing features compared to ultraviolet radiation (less damaging, more selective, predominant in the solar spectrum, possibility to increase the penetration depth). Two different metal-organic frameworks (MOFs) were synthesized from the same linker bearing all-visible ortho-fluoroazobenzene photoswitches as pendant groups. The MOFs exhibit different architectures that strongly influence the ability of the azobenzenes to isomerize inside the voids. The framework built with Al-based nodes has congested 1D channels that preclude efficient isomerization. As a result, local light-heat conversion can be used to alter the CO2 adsorption capacity of the material on exposure to green light. The second framework, built with Zr nodes, provides enough room for the photoswitches to isomerize, which leads to a unique bistable photochromic MOF that readily responds to blue and green light. The superiority of green over UV irradiation was additionally demonstrated by reflectance spectroscopy and analysis of digested samples. This material offers promising perspectives for liquid-phase applications such as light-controlled catalysis and adsorptive separation., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Stimuli responsive compounds and materials are of high interest in synthetic chemistry and materials science, with light being the most intriguing stimulus due to the possibility to remote control the physicochemical properties of a molecule or a material. There is a constant quest to design photoswitches with improved switching efficiency and especially diarylethene-type switches promise photo cyclization quantum yields up to unity. However, only limited attention has been paid towards the influence of the solution conformation on the switching efficiency. Here, we describe a detailed NMR spectroscopic investigation on the conformational distribution of bridge-substituted dithienylcyclopentenes in solution. We could discriminate between several photoactive and photoinactive as well as two diastereomorphous conformations and show that the trends observed in the switching efficiency match the conformer populations obtained from state of the art NMR parameters in solution., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The ability to influence key properties of molecular systems by using light holds much promise for the fields of materials science and life sciences. The cornerstone of such systems is molecules that are able to reversibly photoisomerize between two states, commonly referred to as photoswitches. One serious restriction to the development of functional photodynamic systems is the necessity to trigger switching in at least one direction by UV light, which is often damaging and penetrates only partially through most media. This review provides a summary of the different conceptual strategies for addressing molecular switches in the visible and near-infrared regions of the optical spectrum. Such visible-light-activated molecular switches tremendously extend the scope of photoswitchable systems for future applications and technologies., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Here we report for the first time a submolecularly resolved scanning tunneling microscopy (STM) study at the solid/liquid interface of the in situ reversible interconversion between two isomers of a diarylethene photoswitch, that is, open and closed form, self-assembled on a graphite surface. Prolonged irradiation with UV light led to the in situ irreversible formation of another isomer as by-product of the reaction, which due to its preferential physisorption accumulates at the surface. By making use of a simple yet powerful thermodynamic model we provide a quantitative description for the observed surface-induced selection of one isomeric form., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A water-soluble furyl-substituted diarylethene derivative has been prepared that can undergo reversible Diels-Alder reactions with maleimides to yield photoswitchable Diels-Alder adducts. Employing bioorthogonal visible light, the release of therapeutically effective concentrations of maleimide-based reactive inhibitors or labels from these "prodrugs" or "protags" could be photoreversibly triggered in buffered, aqueous solution at body temperature. It is shown how the release properties can be fine-tuned and a thorough investigation of the release dynamics is presented. Our system should allow for spatiotemporal control over the inhibition and labeling of specific protein targets and is ready to be surveyed in living organisms., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Improving the photochemical properties of molecular photoswitches is crucial for the development of light-responsive systems in materials and life sciences. ortho-Fluoroazobenzenes are a new class of rationally designed photochromic azo compounds with optimized properties, such as the ability to isomerize with visible light only, high photoconversions, and unprecedented robust bistable character. Introducing σ-electron-withdrawing F atoms ortho to the NN unit leads to both an effective separation of the n→π* bands of the E and Z isomers, thus offering the possibility of using these two transitions for selectively inducing E/Z isomerizations, and greatly enhanced thermal stability of the Z isomers. Additional para-electron-withdrawing groups (EWGs) work in concert with ortho-F atoms, giving rise to enhanced separation of the n→π* transitions. A comprehensive study of the effect of substitution on the key photochemical properties of ortho-fluoroazobenzenes is reported herein. In particular, the position, number, and nature of the EWGs have been varied, and the visible light photoconversions, quantum yields of isomerization, and thermal stabilities have been measured and rationalized by DFT calculations., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Resistance to chemotherapeutic agents represents a major challenge in cancer research. One approach to this problem is combination therapy, the application of a toxic chemotherapeutic drug together with a sensitizing compound that addresses the vulnerability of cancer cells to induce apoptosis. Here we report the discovery of a new compound class (T8) that sensitizes various cancer cells towards etoposide treatment at subtoxic concentrations. Proteomic analysis revealed protein disulfide isomerase (PDI) as the target of the T8 class. In-depth chemical and biological studies such as the synthesis of optimized compounds, molecular docking analyses, cellular imaging, and apoptosis assays confirmed the unique mode of action through reversible PDI inhibition., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)