Search

This study explores a new mode of contortion in perylene diimides where the molecule is bent, like a bow, along its long axis. These bowed PDIs were synthesized through a facile fourfold Suzuki macrocyclization with aromatic linkers and a tetraborylated perylene diimide that introduces strain and results in a bowed structure. By altering the strings of the bow, the degree of bending can be controlled from flat to highly bent. Through spectroscopy and quantum chemical calculations, it is demonstrated that the energy of the lowest unoccupied orbital can be controlled by the degree of bending in the structures and that the energy of the highest occupied orbital can be controlled to a large extent by the constitution of the aromatic linkers. The important finding is that the bowing results not only in red-shifted absorptions but also more facile reductions., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Metal-organic frameworks (MOFs) have diverse potential applications in catalysis, gas storage, separation, and drug delivery because of their nanoscale periodicity, permanent porosity, channel functionalization, and structural diversity. Despite these promising properties, the inherent structural features of even some of the best-performing MOFs make them moisture-sensitive and unstable in aqueous media, limiting their practical usefulness. This problem could be overcome by developing stable hydrophobic MOFs whose chemical composition is tuned to ensure that their metal-ligand bonds persist even in the presence of moisture and water. However, the design and fabrication of such hydrophobic MOFs pose a significant challenge. Reported syntheses of hydrophobic MOFs are critically summarized, highlighting issues relating to their design, characterization, and practical use. First, wetting of hydrophobic materials is introduced and the four main strategies for synthesizing hydrophobic MOFs are discussed. Afterward, critical challenges in quantifying the wettability of these hydrophobic porous surfaces and solutions to these challenges are discussed. Finally, the reported uses of hydrophobic MOFs in practical applications such as hydrocarbon storage/separation and their use in separating oil spills from water are summarized. Finally, the state of the art is summarized and promising future developments of hydrophobic MOFs are highlighted., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Slippery lubricant-infused surfaces allow easy removal of liquid droplets on surfaces. They consist of textured or porous substrates infiltrated with a chemically compatible lubricant. Capillary forces help to keep the lubricant in place. Slippery surfaces hold promising prospects in applications including drag reduction in pipes or food packages, anticorrosion, anti-biofouling, or anti-icing. However, a critical drawback is that shear forces induced by flow lead to depletion of the lubricant. In this work, a way to overcome the shear-induced lubricant depletion by replenishing the lubricant from the flow of emulsions is presented. The addition of small amounts of positively charged surfactant reduces the charge repulsion between the negatively charged oil droplets contained in the emulsion. Attachment and coalescence of oil droplets from the oil-in-water emulsion at the substrate surface fills the structure with the lubricant. Flow-induced lubrication of textured surfaces can be generalized to a broad range of lubricant-solid combinations using minimal amounts of oil., Competing Interests: The authors declare no conflict of interest.

Fouling of thin tubes is a major problem, leading to various infections and associated morbidities, while cleaning is difficult or even impossible. Here, a generic method is introduced to activate and coat the inside of meter-long and at the same time thin (down to 1 mm) tubes with a super-liquid-repellent layer of nanofilaments, exhibiting even antibacterial properties. Activation is facilitated by pumping an oxidative Fenton solution through the tubes. Subsequent pumping of a silane solution renders the surface of the tubes super-liquid-repellent. The wide applicability of the method is demonstrated by coating stiff and flexible tubes made of polymers, inorganic/organic hybrids, metals, and ceramics. Coated medical catheters show excellent antibacterial properties. Notably, the nanofilaments retain their antibacterial properties even in the superhydrophilic state. These findings open new avenues toward the design of biocide-free, antibacterial tubings and catheters., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Low roll-off angle, high impalement pressure, and mechanical robustness are key requirements for super-liquid-repellent surfaces to realize their potential in applications ranging from gas exchange membranes to protective and self-cleaning materials. Achieving these properties is still a challenge with superamphiphobic surfaces, which can repel both water and low-surface-tension liquids. In addition, fabrication procedures of superamphiphobic surfaces are typically slow and expensive. Here, by making use of liquid flame spray, a silicon dioxide-titanium dioxide nanostructured coating is fabricated at a high velocity up to 0.8 m s -1 . After fluorosilanization, the coating is superamphiphobic with excellent transparency and an extremely low roll-off angle; 10 µL drops of n-hexadecane roll off the surface at inclination angles even below 1°. Falling drops bounce off when impacting from a height of 50 cm, demonstrating the high impalement pressure of the coating. The extraordinary properties are due to a pronounced hierarchical nanotexture of the coating., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A versatile and facile synthetic route toward a ultralight hierarchical poroushybrid composed of metal-organic gels and fluorinated graphene oxide is reported. The composite gels show excellent absorbency of oil and various organic solvents due to their prominent meso/macropores, notable hydrophobicity, and superoleophilicity., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Superomniphobic membranes for post-combustion CO 2 capture are introduced. Concentrated aqueous amine solutions stay on the topmost part of the membranes, providing a large liquid/CO 2 interface. Wetting of the membrane, which reduces the capture efficiency, is prevented. The CO 2 capture rates using the chemically, mechanically, and thermally stable superomniphobic membranes are enhanced by up to 40% relative to commercial membranes., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)