Search

Oxygen reduction reaction (ORR) electrocatalysts are essential for widespread application of quasi-solid-state Zn-air batteries (ZABs), but the well-known Fe-N-C single-atom catalysts (SACs) suffer from low activity and stability because of unfavorable strong adsorption of oxygenated intermediates. Herein, the study synthesizes dual Fe/I single atoms anchored on N-doped carbon nanorods (Fe/I-N-CR) via a metal-organic framework (MOF)-mediated two-step tandem-pyrolysis method. Atomic-level I doping modulates the electronic structure of Fe-N x centers via the long-range electron delocalization effect. Benefitting from the synergistic effect of dual Fe/I single-atom sites and the structural merits of 1D nanorods, the Fe/I-N-CR catalyst shows excellent ORR activity and stability, superior to Pt/C and Fe or I SACs. When the Fe/I-N-CR is employed as cathode for quasi-solid-state ZABs, a high power density of 197.9 mW cm -2 and an ultralong cycling lifespan of 280 h at 20 mA cm -2 are both achieved, greatly exceeding those of commercial Pt/C+IrO 2 (119.1 mW cm -2 and 47 h). In addition, wide-temperature adaptability and superior stability from -40 to 60 °C are realized for the Fe/I-N-CR-based quasi-solid-state ZABs. This work provides a MOF-mediated two-step tandem-pyrolysis strategy to engineer high-performance dual SACs with metal/nonmetal centers for ORR and sustainable ZABs., (© 2024 Wiley‐VCH GmbH.)

Mammalian cochlea spiral ganglion neurons (SGNs) are crucial for sound transmission, they can be damaged by chemotherapy drug cisplatin and lead to irreversible sensorineural hearing loss (SNHL), while such damage can also render cochlear implants ineffective. However, the mechanisms underlying cisplatin-induced SGNs damage and subsequent SNHL are still under debate and there is no currently effective clinical treatment. Here, this study demonstrates that ferroptosis is triggered in SGNs following exposure to cisplatin. Inhibiting ferroptosis protects against cisplatin-induced SGNs damage and hearing loss, while inducing ferroptosis intensifies these effects. Furthermore, cisplatin prompts nuclear receptor coactivator 4 (NCOA4)-mediated ferritinophagy in SGNs, while knocking down NCOA4 mitigates cisplatin-induced ferroptosis and hearing loss. Notably, the upstream regulator of NCOA4 is identified and transcription factor forkhead box O1 (FOXO1) is shown to directly suppress NCOA4 expression in SGNs. The knocking down of FOXO1 amplifies NCOA4-mediated ferritinophagy, increases ferroptosis and lipid peroxidation, while disrupting the interaction between FOXO1 and NCOA4 in NCOA4 knock out mice prevents the cisplatin-induced SGN ferroptosis and hearing loss. Collectively, this study highlights the critical role of the FOXO1-NCOA4 axis in regulating ferritinophagy and ferroptosis in cisplatin-induced SGNs damage, offering promising therapeutic targets for SNHL mitigation., (© 2024 The Author(s). Advanced Science published by Wiley‐VCH GmbH.)

Tumor-associated macrophages (TAMs) play a crucial function in solid tumor antigen clearance and immune suppression. Notably, 2D transitional metal dichalcogenides (i.e., molybdenum disulfide (MoS 2 ) nanozymes) with enzyme-like activity are demonstrated in animal models for cancer immunotherapy. However, in situ engineering of TAMs polarization through sufficient accumulation of free radical reactive oxygen species for immunotherapy in clinical samples remains a significant challenge. In this study, defect-rich metastable MoS 2 nanozymes, i.e., 1T2H-MoS 2 , are designed via reduction and phase transformation in molten sodium as a guided treatment for human breast cancer. The as-prepared 1T2H-MoS 2 exhibited enhanced peroxidase-like activity (≈12-fold enhancement) than that of commercial MoS 2 , which is attributed to the charge redistribution and electronic state induced by the abundance of S vacancies. The 1T2H-MoS 2 nanozyme can function as an extracellular hydroxyl radical generator, efficiently repolarizing TAMs into the M1-like phenotype and directly killing cancer cells. Moreover, the clinical feasibility of 1T2H-MoS 2 is demonstrated via ex vivo therapeutic responses in human breast cancer samples. The apoptosis rate of cancer cells is 3.4 times greater than that of cells treated with chemotherapeutic drugs (i.e., doxorubicin)., (© 2024 Wiley‐VCH GmbH.)

Acute myeloid leukemia (AML) is a common and catastrophic hematological neoplasm with high mortality rates. Conventional therapies, including chemotherapy, hematopoietic stem cell transplantation (HSCT), immune therapy, and targeted agents, have unsatisfactory outcomes for AML patients due to drug toxicity, off-target effects, drug resistance, drug side effects, and AML relapse and refractoriness. These intrinsic limitations of current treatments have promoted the development and application of nanomedicine for more effective and safer leukemia therapy. In this review, the classification of nanoparticles applied in AML therapy, including liposomes, polymersomes, micelles, dendrimers, and inorganic nanoparticles, is reviewed. In addition, various strategies for enhancing therapeutic targetability in nanomedicine, including the use of conjugating ligands, biomimetic-nanotechnology, and bone marrow targeting, which indicates the potential to reverse drug resistance, are discussed. The application of nanomedicine for assisting immunotherapy is also involved. Finally, the advantages and possible challenges of nanomedicine for the transition from the preclinical phase to the clinical phase are discussed., (© 2024 Wiley‐VCH GmbH.)

Bromine chemistry is responsible for the catalytic ozone destruction in the atmosphere. The heterogeneous reactions of sea-salt aerosols are the main abiotic sources of reactive bromine in the atmosphere. Here, we present a novel mechanism for the activation of bromide ions (Br - ) by O 2 and H 2 O in the absence of additional oxidants. The laboratory and theoretical calculation results demonstrated that under dark conditions, Br - , O 2 and H 3 O + could spontaneously generate Br and HO 2 radicals through a proton-electron transfer process at the air-water interface and in the liquid phase. Our results also showed that light and acidity could significantly promote the activation of Br - and the production of Br 2 . The estimated gaseous Br 2 production rate was up to 1.55×10 10  molecules cm -2  ⋅ s -1 under light and acidic conditions; these results showed a significant contribution to the atmospheric reactive bromine budget. The reactive oxygen species (ROS) generated during Br - activation could promote the multiphase oxidation of SO 2 to produce sulfuric acid, while the increase in acidity had a positive feedback effect on Br - activation. Our findings highlight the crucial role of the proton-electron transfer process in Br 2 production; here, H 3 O + facilitates the activation of Br - by O 2 , serves as a significant source of atmospheric reactive bromine and exerts a profound impact on the atmospheric oxidation capacity., (© 2024 Wiley-VCH GmbH.)

Battery-type electrode materials with high capacity, wide potential windows, and good cyclic stability are crucial to breaking through energy storage limitations and achieving high energy density. Herein, a novel 2D-on-2D Al-doped NiCo layered double hydroxide (NiCoAl x LDH) nanosheet arrays with high-mass-loading are grown on a carbon cloth (CC) substrate via a two-step hydro/solvothermal deposition strategy, and the effect of Al doping is employed to modify the deposition behavior, hierarchical morphology, phase stability, and multi-metallic synergistic effect. The optimized NiCoAl 0.1 LDH electrode exhibits capacities of 5.43, 6.52, and 7.25 C cm -2 (9.87, 10.88, and 11.15 F cm -2 ) under 0-0.55, 0-0.60, and 0-0.65 V potential windows, respectively, illustrating clearly the importance of the wide potential window. The differentiated deposition strategy reduces the leaching level of Al 3+ cations in alkaline solutions, ensuring excellent cyclic performance (108% capacity retention after 40 000 cycles). The as-assembled NiCoAl 0.1 LDH//activated carbon cloth (ACC) hybrid supercapacitor delivers 3.11 C cm -2 at 0-2.0 V, a large energy density of 0.84 mWh cm -2 at a power density of 10.00 mW cm -2 , and excellent cyclic stability with ≈135% capacity retention after 150 000 cycles., (© 2024 Wiley‐VCH GmbH.)

Organic radicals with narrow energy gaps are highly sought-after for the production of near-infrared (NIR) fluorophores. However, the current repertoire of developed organic radicals is notably limited, facing challenges related to stability and low fluorescence efficiency. This study addresses these limitations by achieving stable radicals in nonconjugated poly(diphenylmethane) (PDPM). Notably, PDPM exhibits a well-balanced structural flexibility and rigidity, resulting in a robust intra-/inter-chain through-space conjugation (TSC). The stable radicals within PDPM, coupled with strong TSC, yield a remarkable full-spectrum emission spanning from blue to NIR beyond 900 nm. This extensive tunability is achieved through careful adjustments of concentration and excitation wavelength. The findings highlight the efficacy of polymerization in stabilizing radicals and introduce a novel approach for developing nonconjugated NIR emitters based on triphenylmethane subunits., (© 2024 Wiley-VCH GmbH.)

Existing tear sensors are difficult to perform multiplexed assays due to the minute amounts of biomolecules in tears and the tiny volume of tears. Herein, the authors leverage DNA tetrahedral frameworks (DTFs) modified on the wireless portable electrodes to effectively capture 3D hybridization chain reaction (HCR) amplifiers for automatic and sensitive monitoring of multiple cytokines in human tears. The developed sensors allow the sensitive determination of various dry eye syndrome (DES)-associated cytokines in human tears with the limit of detection down to 0.1 pg mL -1 , consuming as little as 3 mL of tear fluid. Double-blind testing of clinical DES samples using the developed sensor and commercial ELISA shows no significant difference between them. Compared with single-biomarker diagnosis, the diagnostic accuracy of this sensor based on multiple biomarkers has improved by ≈16%. The developed system offers the potential for tear sensors to enable personalized and accurate diagnosis of various ocular diseases., (© 2024 Wiley‐VCH GmbH.)

Electrotherapy is of great interest in the field of tissue repair as an effective, well-tolerated, and noninvasive treatment. Triboelectric nanogenerator (TENG) has shown advantages in promoting wound healing due to its peak output characteristic and low Joule heating effect. However, it is limited in infected wound healing due to poor antimicrobial capacity. Here, a wearable triboelectric stimulator (WTS) is developed that consists of a flexible TENG (F-TENG) and a triboelectric-responsive drug delivery hydrogel (TR-DDH) for healing of bacterium-infected wounds. F-TENG can generate pulsed current to wounds by converting mechanical energy from body movements. Polypyrrole is prone to reduction and volume contraction under electrical stimulation, resulting in desorption of curcumin nanoparticles (CUR NPs) from the polypyrrole in TR-DDH. Therefore, the highly efficient and controllable release of CUR NPs can be achieved by triboelectric stimulation. According to the in vitro and in vivo experiments, WTS has the greatest antimicrobial effect and the fastest promotion of infected wound healing compared to treatment with electrical stimulation or curcumin. Finally, the safety assessment demonstrates that the WTS has excellent tissue safety for chronic wound healing. Synergistic therapy with WTS provides an efficient strategy for chronic wound healing and smart-responsive drug delivery systems., (© 2024 Wiley‐VCH GmbH.)

Organ-on-chips can highly simulate the complex physiological functions of organs, exhibiting broad application prospects in developmental research, disease simulation, as well as new drug research and development. However, there is still less concern about effectively constructing cochlea-on-chips. Here, a novel cochlear organoids-integrated conductive hydrogel biohybrid system with cochlear implant electroacoustic stimulation (EAS) for cochlea-on-a-chip construction and high-throughput drug screening, is presented. Benefiting from the superior biocompatibility and electrical property of conductive hydrogel, together with cochlear implant EAS, the inner ear progenitor cells can proliferate and spontaneously shape into spheres, finally forming cochlear organoids with good cell viability and structurally mature hair cells. By incorporating these progenitor cells-encapsulated hydrogels into a microfluidic-based cochlea-on-a-chip with culture chambers and a concentration gradient generator, a dynamic and high-throughput evaluation of inner ear disease-related drugs is demonstrated. These results indicate that the proposed cochlea-on-a-chip platform has great application potential in organoid cultivation and deafness drug evaluation., (© 2024 The Authors. Advanced Materials published by Wiley‐VCH GmbH.)

The uterine epithelium undergoes a dramatic spatiotemporal transformation to enter a receptive state, involving a complex interaction between ovarian hormones and signals from stromal and epithelial cells. Redox homeostasis is critical for cellular physiological steady state; emerging evidence reveals that excessive lipid peroxides derail redox homeostasis, causing various diseases. However, the role of redox homeostasis in early pregnancy remains largely unknown. It is found that uterine deletion of Glutathione peroxidase 4 (GPX4), a key factor in repairing oxidative damage to lipids, confers defective implantation, leading to infertility. To further pinpoint Gpx4's role in different cell types, uterine epithelial-specific Gpx4 is deleted by a lactotransferrin (Ltf)-Cre driver; the resultant females are infertile, suggesting increased lipid peroxidation levels in uterine epithelium compromises receptivity and implantation. Lipid peroxidation inhibitor administration failed to rescue implantation due to carbonylation of major receptive-related proteins underlying high lipid reactive oxygen species. Intriguingly, superimposition of Acyl-CoA synthetase long-chain family member 4 (ACSL4), an enzyme that promotes biosynthesis of phospholipid hydroperoxides, along with uterine epithelial GPX4 deletion, preserves reproductive capacity. This study reveals the pernicious impact of unbalanced redox signaling on embryo implantation and suggests the obliteration of lipid peroxides as a possible therapeutic approach to prevent implantation defects., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

The electrochemical carbon dioxide reduction reaction (E-CO 2 RR) to formate is a promising strategy for mitigating greenhouse gas emissions and addressing the global energy crisis. Developing low-cost and environmentally friendly electrocatalysts with high selectivity and industrial current densities for formate production is an ideal but challenging goal in the field of electrocatalysis. Herein, novel titanium-doped bismuth nanosheets (TiBi NSs) with enhanced E-CO 2 RR performance are synthesized through one-step electrochemical reduction of bismuth titanate (Bi 4 Ti 3 O 12 ). We comprehensively evaluated TiBi NSs using in situ Raman spectra, finite element method, and density functional theory. The results indicate that the ultrathin nanosheet structure of TiBi NSs can accelerate mass transfer, while the electron-rich properties can accelerate the production of *CO 2 - and enhance the adsorption strength of *OCHO intermediate. The TiBi NSs deliver a high formate Faradaic efficiency (FE formate ) of 96.3% and a formate production rate of 4032 µmol h -1  cm -2 at -1.01 V versus RHE. An ultra-high current density of -338.3 mA cm -2 is achieved at -1.25 versus RHE, and simultaneously FE formate still reaches more than 90%. Furthermore, the rechargeable Zn-CO 2 battery using TiBi NSs as a cathode catalyst achieves a maximum power density of 1.05 mW cm -2 and excellent charging/discharging stability of 27 h., (© 2023 Wiley-VCH GmbH.)

Osteosarcoma is an aggressive malignant tumor that primarily develops in children and adolescents. The conventional treatments for osteosarcoma often exert negative effects on normal cells, and chemotherapeutic drugs, such as platinum, can lead to multidrug resistance in tumor cells. Herein, this work reports a new bioinspired tumor-targeting and enzyme-activatable cell-material interface system based on DDDEEK-pY-phenylboronic acid (SAP-pY-PBA) conjugates. Using this tandem-activation system, this work selectively regulates the alkaline phosphatase (ALP) triggered anchoring and aggregation of SAP-pY-PBA conjugates on the cancer cell surface and the subsequent formation of the supramolecular hydrogel. This hydrogel layer can efficiently kill osteosarcoma cells by enriching calcium ions from tumor cells and forming a dense hydroxyapatite layer. Owing to the novel antitumor mechanism, this strategy neither hurts normal cells nor causes multidrug resistance in tumor cells, thereby showing an enhanced tumor treatment effect than the classical antitumor drug, doxorubicin (DOX). The outcome of this research demonstrates a new antitumor strategy based on a bioinspired enzyme-responsive biointerface combining supramolecular hydrogels with biomineralization., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Clusteroluminescence (CL) and through-space interactions (TSIs) of non-conjugated molecules have drawn more attention due to their unique photophysical behaviors that are different from largely conjugated luminogens. However, achieving red and even near-infrared (NIR) emission from such systems is still challenging due to the intrinsic drawbacks of non-conjugated molecules and the lack of theories for structure-property relationships. In this work, six phenolic resins are designed and synthesized based on two molecule-engineering strategies: increasing the number of TSIs units and introducing electron-donating/-withdrawing groups. All phenolic resins are verified as luminogens with CL property (CLgens), and the first example of CLgens with NIR emission (maximum emission wavelength ≥680 nm) and high absolute quantum yield (47 %) is reported. Experiments and theoretical analysis reveal that two TSIs types, through-space locally excited state and through-space charge transfer state, play essential roles in achieving CL from these non-conjugated polymers, which could be manipulated via changing structural conformation and electron density or altering electron transition behaviors. This work not only provides an approach to manipulate TSIs and CL of non-conjugated polymers but also endows commercially available phenolic resins with high practical value as luminescence materials., (© 2023 Wiley-VCH GmbH.)

Current vehicles used to deliver antisense oligonucleotides (ASOs) cannot distinguish between bacterial and mammalian cells, greatly hindering the preclinical or clinical treatment of bacterial infections, especially those caused by antibiotic-resistant bacteria. Herein, bacteria-specific ATP-binding cassette (ABC) sugar transporters are leveraged to selectively internalize ASOs by hitchhiking them on α (1-4)-glucosidically linked glucose polymers. Compared with their cell-penetrating peptide counterparts, which are non-specifically engulfed by mammalian and bacterial cells, the presented therapeutics consisting of glucose polymer and antisense peptide nucleic-acid-modified nanoparticles are selectively internalized into the human-derived multidrug-resistant Escherichia coli and methicillin-resistant Staphylococcus aureus, and they display a much higher uptake rate (i.e., 51.6%). The developed strategy allows specific and efficient killing of nearly 100% of the antibiotic-resistant bacteria. Its significant curative efficacy against bacterial keratitis and endophthalmitis is also shown. This strategy will expand the focus of antisense technology to include bacterial cells other than mammalian cells., (© 2023 Wiley-VCH GmbH.)

N 2 O 5 is an important intermediate in the atmospheric nitrogen cycle. Using a flow tube reactor, N 2 O 5 was found to be released from the TiO 2 surface during the photocatalytic oxidation of NO 2 , revealing a previously unreported source of N 2 O 5 . The rate of N 2 O 5 release from TiO 2 was dependent on the initial NO 2 concentration, relative humidity, O 2 /N 2 ratio, and irradiation intensity. Experimental evidence and quantum chemical calculations showed that NO 2 can react with the surface hydroxyl groups and the generated electron holes on the TiO 2 , followed by combining with another NO 2 molecule to form N 2 O 5 . The latter was physisorbed on TiO 2 and had a low adsorption energy of -0.13 eV. Box model simulations indicated that the new source of N 2 O 5 released from TiO 2 can increase the daytime N 2 O 5 concentration by up to 20 % in urban areas if abundant TiO 2 -containing materials and high NOx concentrations were present. This joint experimental/theoretical study not only demonstrates a new chemical mechanism for N 2 O 5 formation but also has important implications for air quality in urban areas., (© 2023 Wiley-VCH GmbH.)

Emerging evidence reveals that amino acid metabolism plays an important role in ferroptotic cell death. The conversion of methionine to cysteine is well known to protect tumour cells from ferroptosis upon cysteine starvation through transamination. However, whether amino acids-produced metabolites participate in ferroptosis independent of the cysteine pathway is largely unknown. Here, the authors show that the tryptophan metabolites serotonin (5-HT) and 3-hydroxyanthranilic acid (3-HA) remarkably facilitate tumour cells to escape from ferroptosis distinct from cysteine-mediated ferroptosis inhibition. Mechanistically, both 5-HT and 3-HA act as potent radical trapping antioxidants (RTA) to eliminate lipid peroxidation, thereby inhibiting ferroptotic cell death. Monoamine oxidase A (MAOA) markedly abrogates the protective effect of 5-HT via degrading 5-HT. Deficiency of MAOA renders cancer cells resistant to ferroptosis upon 5-HT treatment. Kynureninase (KYNU), which is essential for 3-HA production, confers cells resistant to ferroptotic cell death, whereas 3-hydroxyanthranilate 3,4-dioxygenase (HAAO) significantly blocks 3-HA mediated ferroptosis inhibition by consuming 3-HA. In addition, the expression level of HAAO is positively correlated with lipid peroxidation and clinical outcome. Together, the findings demonstrate that tryptophan metabolism works as a new anti-ferroptotic pathway to promote tumour growth, and targeting this pathway will be a promising therapeutic approach for cancer treatment., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Herein, the synthesis of a new type of catalyst, SBA-M (Schiff complex of different metal types grafted on SBA-15) based on a quaternization reaction, is described. Various amounts of ionic liquid were grafted into the pore channels of SBA-15 using the post-grafting method, which allowed the ionic liquid to be grafted into the pore channels restrictively. Notably, over six cycles, SBA-Mn (0.2) has been shown to maintain its catalytic activity and stability. In addition, a reaction mechanism for the cycloaddition of CO 2 with epoxides based on density-functional theory is proposed. The cycloaddition reaction of CO 2 and epoxides is an efficient way of carbon fixation. It is demonstrated that the metal coordinated with the oxygen atom of the epoxides and that a halogen attacked the carbon of epoxides. Moreover, theoretical calculations and synthesis strategy provide a new approach for CO 2 conversion., (© 2022 Wiley-VCH GmbH.)

Multiple myeloma (MM) is the second most common hematological malignancy. It is characterized by abnormal transformation and uncontrolled clonal proliferation of malignant plasma cells in the bone marrow (BM), which can destroy bone structure and inhibit hematopoiesis. Although there are new therapeutic methods, they are not curative, mainly because it is difficult to deliver an effective amount of drug to BM, leading to a failure to eradicate MM cells inside the BM. BM homing is an important and unique characteristic of MM cells and it is mainly affected by surface molecules on the tumor cell membrane. Inspired by this mechanism, an MM-mimicking nanocarrier is developed by coating bortezomib (BTZ)-loaded poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) (PCEC) nanoparticles with the MM cell membrane. The MM-mimicking nanoparticles can enter the BM based on BM homing as a "Trojan horse" and target the tumor cells through homologous targeting. In this way, drug availability at the myeloma site is enhanced so as to inhibit MM growth. In addition, these MM-mimicking nanoparticles can escape phagocytosis by the MPS and have a long circulation effect. The in vivo therapeutic results demonstrate an excellent treatment efficacy for MM. Accordingly, this strategy may be a promising platform for the treatment of MM., (© 2022 Wiley-VCH GmbH.)

A novel bacteria-based drug delivery system, termed "Trojan nanobacteria system", has been developed in which nanoagents are internalized into engineered bacteria through bacteria-specific maltodextrin (MD) transporters. Compared to the method of attaching nanoagents to bacterial surfaces, this Trojan system features higher payloads and better stability. In cancer therapy, Trojan nanobacteria can specifically discriminate the tumor region and then penetrate deep tumor tissues. Once in the tumor, the Trojan nanobacteria systems are able to destroy deep tumor tissues due to the combined effects of antitumor protein expression (e.g., tumor necrosis factor-α, TNF-α) and photothermal properties., (© 2022 Wiley-VCH GmbH.)

OH radicals in the air maintain the oxidizing power of the troposphere. A conventional view is that particulate matter (PM) in the atmosphere is a major sink of OH radicals, thereby lowering the oxidizing power of atmosphere in the event of high-level PM. By contrary, our joint experimental/theoretical study reveals a new mechanism for the generation of gaseous OH radicals by carbonaceous soot particles. We show that water and O 2 react on carbonaceous surfaces and give rise to gaseous OH radicals under irradiation. With ample delocalized π electrons, carbonaceous surfaces enable the easy desorption of hydroxyl groups to produce gaseous OH radicals, evidenced by direct observation of the steady generation of OH radicals on a carbonaceous surface. Our results reveal a new chemical mechanism for the production of OH radicals., (© 2022 Wiley-VCH GmbH.)

The development of efficient and stable Pt-based catalysts is significant but challenging for fuel cells. Herein, Sn and Co elements are introduced into Pt to form PtCo-PtSn/C heterostructure for enhancing the oxygen reduction reaction (ORR). Electrochemical results indicate that it has remarkable ORR intrinsic activity with a high mass activity (1,158 mA mg -1 Pt) at 0.9 V in HClO 4 solution, which is 2.18-, 6.81-, and 9.98-fold higher than that of PtCo/C, PtSn/C, and Pt/C. More importantly, the catalytic activity attenuation for PtCo-PtSn/C is only 27.4% after 30 000 potential cycles, showing high stability. Furthermore, theoretical calculations reveal that the enhancement is attributed to charge transfer and the unique structure of PtCo-PtSn/C heterostructure, which regulate the d-band center of Pt and prevent non-noble metals from further dissolution. This work thus opens a way to design and prepare highly efficient Pt-based alloy catalysts for proton exchange membrane fuel cells., (© 2022 Wiley-VCH GmbH.)

Constructing an efficient photoelectron transfer channel to promote the charge carrier separation is a great challenge for enhancing photocatalytic hydrogen evolution from water. In this work, an ultrathin 2D/2D Ti 3 C 2 T x /ZnIn 2 S 4 heterostructure is rationally designed by coupling the ultrathin ZnIn 2 S 4 with few-layered Ti 3 C 2 T x via the electrostatic self-assembly strategy. The 2D/2D Ti 3 C 2 T x /ZnIn 2 S 4 heterostructure possesses larger contact area and strong electronic interaction to promote the charge carrier transfer at the interface, and the sulfur vacancy on the ZnIn 2 S 4 acting as the electron trap further enhances the separation of the photoinduced electrons and holes. As a consequence, the optimal 2D/2D Ti 3 C 2 T x /ZnIn 2 S 4 composite exhibits a high photocatalytic hydrogen evolution rate of 148.4 µmol h -1 , which is 3.6 times and 9.2 times higher than that of ZnIn 2 S 4 nanosheet and flower-like ZnIn 2 S 4 , respectively. Moreover, the stability of the ZnIn 2 S 4 is significantly improved after coupling with the few-layered Ti 3 C 2 T x . The characterizations and density functional theory calculation demonstrate that the synergistic effect of the sulfur vacancy and Ti 3 C 2 T x cocatalyst can greatly promote the electrons transfer from ZnIn 2 S 4 to Ti 3 C 2 T x and the separation of photogenerated charge carriers, thus enhancing the photocatalytic hydrogen evolution from water., (© 2021 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Preparation of non-conjugated polymers with long-wavelength emission and high quantum yield (QY) is still a huge challenge. Herein, we report the first example of linear non-conjugated polyester exhibiting yellow-green clusteroluminescence (CL) and a high QY of 38 %. We discovered that the polyester P3 with balanced flexibility and rigidity showed the longest CL wavelength and highest QY. Systematically photophysical characterization unravel the key role of ester cluster in the CL and the cluster formation via the aggregate of ester units was visualized. Moreover, P3 was demonstrated to be a highly selective, quick-responsive (ca. 1.2 min) and sensitive detector (detection limit is 0.78 μM) for irons owing to the fast disassociation of clusters by irons. This work not only gains further mechanistic insight into CL but also provides a new strategy to design high-efficiency and long-wavelength CL, meanwhile, enlightens the glorious application prospect of luminescent polyester., (© 2021 Wiley-VCH GmbH.)

A strategy to synthesize water-soluble and fluorescent flavonoid-silica nanocomposites (FSiNCs) simultaneously featuring anti-tumor and anti-bacterial abilities is developed. Furthermore, it is demonstrated that the therapeutic effects of FSiNCs are associated with the selective accumulation of reactive oxide species in both tumor and bacteria cells. Following that, the resultant FSiNCs are incorporated with thrombin and fibrinogen, being sprayed onto the tumor surgical wound site to in situ form fibrin gel (FSiNCs@Fibrin). Remarkably, such FSiNCs@Fibrin results in an ≈18-fold reduction in intratumoral bacteria numbers and ≈12-fold decrease in tumor regrowth compared to equivalent free flavonoid-loaded gel., (© 2021 Wiley-VCH GmbH.)

Aqueous reactions between organic peroxides and SO 2 are of intense interest in atmospheric science because of their ubiquitous implications for sulfate formation in secondary aerosols. However, the relative yields of the reaction products (inorganic vs. organic sulfates) remain controversial (i.e., 90 % vs. 40-70 % for inorganic sulfate) due in part to the lack of understanding of the underlying reaction mechanisms. Here, our computational results suggest that the reactions of HSO 3 - (dissolved SO 2 ) with organic peroxides are initiated on the surface of water nanodroplets and then proceed under two reaction pathways, in which the S atom of HSO 3 - attacks either the O1 or O2 atom of the peroxide group -O(O2)O(O1)H, leading to the formation of inorganic and organic sulfates, respectively. Notably, we find that thse reaction initiated by O1 atom exhibits a relatively low energy barrier and high reaction rate, which favours the formation of inorganic sulfate., (© 2021 Wiley-VCH GmbH.)

In this work, a class of multifunctional silicon-carbon nanohybrids (designated as SiCNs), which simultaneously possess aqueous dispersibility, bright fluorescence (photoluminescence quantum yield [PLQY]: ≈28%), as well as high antibacterial and wound healing activity, is presented. Taking advantage of these unique merits, cell distribution and pharmacological behavior of the SiCNs is first investigated through tracking their strong and stable fluorescence. The high bacteria inhibition ability (≈82.9% killing rate toward S. aureus) and hemostatic effects (shorten the bleeding time from ≈60 to ≈15 s) of the resultant SiCNs are then demonstrated. Moreover, the wound closure promotion activity (10% lead in wound contraction) is systematically demonstrated in vivo, which is especially suitable for wound healing applications. The results suggest the SiCNs as a new kind of high-performance multifunctional nanoagents suitable for various biological and biomedical utilizations., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The reactions of 1-sulfonyl-1H-indazoles under basic conditions are discussed, and the direct N-alkylation and Kemp elimination reactions of these compounds are reported. A series of 2-(p-tosylamino)benzonitriles and N-alkyl indazoles were prepared in good yields. Moreover, the 2-(p-tosylamino)benzonitriles could be transformed into a diverse range of important derivatives in a one-pot reaction. This method was successfully applied to the total syntheses of quindolinone and cryptolepinone; quindolinone was prepared in a one-pot reaction from 1-sulfonyl-1H-indazole., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A newly synthesized acridone derivative 8a shows potent antitumor activity against CCRF-CEM leukemia cells. Herein, the first proteomic study of 8a effects in CCRF-CEM cells was performed by 2D nano-LC-ESI-MS/MS to better understand the mechanisms of action of 8a. Data analyses based on PLGS, STRING, Cytoscape, and database for annotation, visualization, and integrated discovery identified 55 proteins that were differentially expressed in response to 8a exposure. Multiple cellular pathways were affected, including chromatin organization, energy metabolism, DNA repair, oxidative-stress, and apoptosis. The changes in protein expression were further verified for PKM2. Moreover, 8a lowered down the expression of HEX and PFK-1. Lactate production was decreased in 8a-treated cells, indicating suppression of glycolysis. The elevated XRCC6 and decreased histone expression levels suggested increased DNA damage in 8a-treated cells, which was confirmed by the increased γ-H2AX foci. Molecular docking of 8a with DNA demonstrated direct interactions of 8a with DNA through three hydrogen bonds and four π-π interactions, potentially explaining the mode of action that 8a damaged to DNA. The differential protein profiling and dysfunction of metabolic pathways induced by 8a provide novel insights into the potential action mechanisms of 8a., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Lead-free flexoelectric piezoelectric metamaterials are created by applying an asymmetric chemical reduction to Na1/2 Bi1/2 TiO3 -BaTiO3 ceramics. The reduction induces two gradient-generating mechanisms, curvature structure and chemical inhomogeneity, and enhances the flexoelectric effect. The ceramics behave like piezoelectric materials, exhibiting an enormous and high-temperature stable apparent piezoelectric response, outperforming existing lead-oxide-based piezoelectrics., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Silicon nanoparticle (SiNP) nanocarriers feature strong fluorescence, ultrasmall size, robust photostability, and tunable drug-loading capacity. Using SiNP nanocarriers, the first example of long-term cancer cell tracking is successfully demonstrated. Furthermore, in vivo experiments show that tumor-bearing mice treated with SiNP nanocarriers survive over 20 d without observable tumor growth, demonstrating the high-efficacy chemotherapy of the Si nanocarriers., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Described is an efficient catalytic asymmetric intermolecular C-C bond-formation process to generate acyclic all-carbon quaternary stereocenters. The reactions overcome the unfavorable steric hindrance around reactive centers, and the competitive elimination (E1), to form a range of useful indole products with excellent efficiency and enantioselectivity., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

High viscosity is an inherent problem of sequencing matrices made of hydrophilic polymers. This problem is amplified in separations using microchips where the channels are even smaller. A novel thermal-associating graft copolymer, using linear polyacrylamide (LPA) as the backbone and poly(propylene oxide) (PPO) as the graft side chain was synthesized. The injection problem could be resolved by introducing PPO side chains that can be assembled by using temperature changes but without an obvious detrimental effect on the sieving ability of the LPA. Viscosity measurement showed that these LPA-g-PPO copolymers had a transition temperature of approximately 40 degrees C, above which a significant increase in viscosity was observed. The sequencing performance depended on the thermal association properties of PPO and related parameters. Without optimization, a read length of 1000 bases with a single base resolution of 0.3 was achieved within an hour on an ABI 310 analyzer, using 1.8 wt% LPA-g-PPO (1.8 MDa, PPO, 0.2%). This novel thermal reversible copolymer solution can be a promising candidate as a viable matrix for DNA sequencing in CE, and even more so in microchip electrophoresis.

Pluronics are triblock copolymers of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) that are able to form many different ordered nanostructures at appropriate polymer concentrations and temperatures in selective solvents. These nanostructured "gels" showed desirable criteria when used as DNA separation media, especially in microchip electrophoresis, including dynamic coating and viscosity switching. A ternary system of F127 (E99P69E99)/TBE buffer/1-butanol was selected as a model system to test the sieving performance of different nanostructures in separating dsDNA by CE. The nanostructures and their lattice constants were determined by small-angle X-ray scattering. Viscosity measurements showed the sol-gel transition phenomena. In addition to the cubic structure, successful electrophoretic separation of dsDNA in 2-D hexagonally packed cylinders was achieved. Results showed that without further optimization, PhiX174 DNA-Hae III digest was well separated within 15 min in a 7-cm separation channel, by using F127/TBE/1-butanol gel with a 2-D hexagonal structure. A mechanism for DNA separations by those gels with both hydrophilic and hydrophobic domains is discussed.

Linear polyacrylamide (LPA) has been widely used as a replaceable separation matrix in CE. An increase in the molecular weight of the separation medium favors the separation of larger DNA fragments. In order to obtain ultrahigh-molecular-weight (UHMW) LPA, a "frozen" method was developed to synthesize the LPA homopolymer. This approach has three major advantages when compared with other existing routes of LPA synthesis: (i) long LPA chains could be obtained easily, with their average molecular weight (MW) being in the high 10 MDa range; (ii) the desired MW could be adjusted over a broad range by controlling the temperature and the concentration of initiators during synthesis; (iii) the product solution contains only a tiny amount of impurity besides the solvent and LPA. Both static and dynamic laser light scattering measurements were carried out to characterize the synthesized LPA in the buffer solution. The DNA sequencing matrix prepared from LPA using this method was studied and the results were compared with the newly developed commercial product POP7 from Applied Biosystems. It should be noted that this approach can be applied to synthesize other water-soluble polymers, resulting in UHMW products because the chain transfer constant is smaller at lower temperatures.

A nanostructured copolymer matrix has successfully separated oligonucleotides with high resolution by CE using a very short separation channel which simulates the real microchip condition for the first time. The triblock copolymer, E(45)B(14)E(45) (B20-5000) with E, B, and subscript denoting oxyethylene, oxybutylene, and segment length, respectively, has a unique temperature-dependent viscosity-adjustable property and a dynamic coating ability in 1xTBE buffer (89 mM Tris, 89 mM boric acid, 2 mM EDTA in Milli-Q water). The B-block is hydrophilic at low temperatures, e.g., 4 degrees C, and the polymer solution has a very low viscosity of about 100 cP in a 32.5% w/v solution. At room temperatures, the B-block becomes hydrophobic due to a breakdown of hydrogen bonds between B-blocks and water, and the polymer matrix forms a body-centered cubic structure at high concentrations. Oligonucleotide sizing markers ranging from 8 to 32 base could be successfully separated with one-base resolution in a 1.5 cm long separation channel by E(45)B(14)E(45) in its gel-like state.

In order to increase the separation rate of surface electrophoresis while preserving the resolution for large DNA chains, e.g., genomic DNA, the mobility and diffusion of Lambda DNA chains adsorbed on flat silicon substrate under an applied electric field, as a function of migration distance, ionic strength, and field intensity, were studied using laser fluorescence microscope. The mobility was found to follow a power law with the field intensity beyond a certain threshold. The detected DNA peak width was shown to be constant with migration distance, slightly smaller with stronger field intensity, but significantly decreased with higher ionic strength. The molecular dynamics simulation demonstrated that the peak width was strongly related with the conformation of DNA chains adsorbed onto surface. The results also implied that there was no diffusion of DNA during migration on surface. Therefore, the Nernst-Einstein relation is not valid in the surface electrophoresis and the separation rate could be improved without losing resolution by decreasing separation distance, increasing buffer concentration, and field intensity. The results indicate the fast separation of genomic DNA chains by surface electrophoresis is possible.

The fast separation of oligonucleotide (oligos) sizing marker by CE using OliGreen and including effects due to the concentration of separation medium and urea denaturant is presented. OliGreen dye is found to be more sensitive than ethidium bromide (by a factor of about 6 based on S/N considerations) for the oligos' separations. Higher concentration of F127 in 1xTris-boricacid-EDTA (TBE) up to 30% w/v leads to better resolution of oligos separations. The addition of urea into the separation medium decreases the sensitivity. With an optimized running condition, the oligos sizing marker could be successfully separated with 1-base resolution within 1.3 min by using 30% w/v F127/1xTBE solution as the separation medium at an applied electric field of 800 V/cm in a 3 cm long capillary, the fastest capillary gel electrophoresis separation with high resolution reported to date for oligos in the similar size range.

Quasi-interpenetrating network (IPN) formed by polyacrylamide and poly(N,N-dimethylacrylamide) was designed, synthesized, and tested as a high-performance DNA separation medium by capillary electrophoresis. The performance of quasi-IPN on DNA sequencing was determined by the acrylamide to dimethylacrylamide molar ratio, polyacrylamide molecular weight, and its size distribution. Under optimal operating conditions, quasi-IPN was able to achieve one-color DNA sequencing up to 1000 bases in 39 min, or 1200 bases in 60 min. Its performance was compared with some of the existing commercialized products, such as POP6 from Applied Biosystems and MegaBACE matrix from Amersham Biosciences. By using the ABI 310 Genetic Analyzer, even without optimized base-calling software, quasi-IPN yielded a read length of up to 700 bases of contiguous sequence (50-750 bases) in 35 min with 99.6% accuracy, or 750 bases of contiguous sequence (50-800 bases) in 37 min with 98.0% accuracy.

The effect of ethidium bromide (EB) on dsDNA separation was studied by using capillary zone electrophoresis (CZE) and laser light scattering (LLS). By increasing the concentration from 1 to 15 microg/mL, EB showed significant influence on the separation of pBR322 HaeIII in terms of resolution, speed, and signal-over-noise ratio. The physicochemical properties of DNA, such as mobility under electric field, charge-over-size ratio, and hydrodynamic radius, showed two declines, a sharp drop followed by a relaxed decrease, with increasing EB concentration. Such observations could be explained by using two modes of the dye binding process: intercalation and outside binding. The combination of results obtained from CZE and LLS also confirmed the existence of outside binding. Compared with intercalation, outside binding showed a weaker dye concentration dependence in neutralizing the negative charges on the DNA fragments. Static light scattering showed that and of DNA in 1xTris-borate-EDTA (TBE) were increased with increasing EB concentration. / of DNA with dye had a value larger than 1.5, suggesting a random coil conformation.

Two new methods of inner capillary coating with poly(vinyl alcohol) (PVAL) have been investigated and evaluated by performing DNA capillary electrophoresis (CE) using PVAL as a separation medium and by measuring the electroosmotic flow (EOF) mobility. The treatment of capillaries with a silanol-group modified PVAL (PVAL-Si) has been found to give good coating effects for improving the resolution of DNA CE and for reducing the EOF. This coating must be effectively achieved by combining the adsorptive property of PVAL chains onto silica with the reaction between the silanol groups of PVAL-Si and the silica surface. The adsorption of PVAL onto silica has been observed by using atomic force microscopy (AFM) for PVAL-Si as well as for a nonmodified PVAL as a control. The coating with PVAL that links to the capillary wall surface with more hydrolytically stable bonding, -Si-C-, has been formed by performing the Grignard reaction, followed by in-capillary polymerization of vinyl acetate (VAc) and hydrolysis. This coating has been found to be effective for improving the resolution of DNA CE and for reducing the EOF.

We represent the first extensive study on DNA capillary electrophoresis using various poly(vinyl alcohol) (PVAL)-related polymers as separation media. As a separation medium, PVAL homopolymer has shown poor resolutions probably due to its very strong hydrogen-bonding characteristics, resulting in extensive self-aggregation. On the other hand, poly(vinyl alcohol-co-vinyl acetate) and poly(vinyl alcohol-co-1-vinyl-2-pyrrolidone) (PVAL-VP), both with a degree of polymerization of approximately 3.0x10(3), have been found to give excellent electropherograms with good resolutions for the analysis of double-stranded (ds)DNA. PVAL-VP, with hydrolytic stability in high and low pH regions, has also yielded fair electropherograms for single-stranded (ss)DNA under neutral and alkaline conditions, although further investigation is essential in order to increase the resolutions necessary for DNA sequencing analysis. The separations obtained under alkaline conditions have shown significantly shorter retention times, one-third of that for the current commercial separation media, due to the higher ionization of phosphate groups in the DNA chains.

We demonstrate that it is possible to separate a broad band of DNA on a solid substrate without topological obstacles. The mobility was found to scale with molecular size (N) as N(-0.25), while the resolution scaled as N(0.75) indicating that diffusivity on this substrate was minimal. By varying the buffer concentration we were able to show that the mobility for a given chain length scaled with the persistent length (p) as p(1/2). This could be shown to be related to the Gaussian conformation of the chains adsorbed on the surface. A two-dimensional corrugated surface of nonporous silica beads was produced using a self-assembling process at the air/water interface. Even though the surface corrugations were comparable to persistence length we show that they do not affect the mobility, indicating that surface friction rather than topological constraints are the predominant mechanism of separation on a surface.

Effects of concentration gradient on double-stranded DNA (dsDNA) separation by capillary electrophoresis are presented. By using a concentration gradient in the range between 0.8% and 3.2% for poly(N,N-dimethylacrylamide) (PDMA), the presence of a mesh-size gradient in the capillary could enhance the separation of larger size DNA fragments, better than that based on a single uniform concentration over the same capillary length. A decrease in the column length could make the gradient effect more obvious. An optimal capillary length could be achieved by using a judicious combination of the concentration gradient and the concentration range, yielding a maximum resolution for the system. The standard deviation of the migration time measured for each DNA fragment was less than 5% in ten continuous runs, suggesting that the gradient formed inside the column was quite stable.

A noncross-linked interpenetrating polymer network (IPN), consisting of poly(N,N-dimethylacrylamide) (PDMA) and polyvinylpyrrolidone (PVP, weight-average molecular weight M(w) = 1 x 10(6) g/mol) was synthesized by polymerizing N,N-dimethylacrylamide (DMA) monomers directly in PVP buffer solution and tested as a separation medium for double-stranded (ds)DNA analysis without further purification. Due to the incompatibility of PVP and PDMA, a simple solution mixture could incur a microphase separation and showed poor performance on dsDNA separation. However, a dramatic improvement was achieved by the formation of an IPN. We attributed the high sieving ability of IPN as due to an increase in the number of entanglements by the more extended polymer chains. Apparent viscosity studies showed that the IPN had a much higher viscosity than the simple mixture containing the same amount of PDMA and PVP. In 1 x Tris-borate-EDTA (TBE) buffer, the concentration ratio of PDMA and PVP had a great effect on the DNA separation. At optimal conditions, the 22 fragments in pBR322/HaeIII DNA were successfully separated within 15 min, with a resolution of better than 1.0 for 123/124 bp.

Mixtures of two polymers with totally different chemical structures, polyacrylamide and polyvinylpyrrolidone (PVP) have been successfully used for double-stranded DNA separation. By polymerization of acrylamide in a matrix of PVP solution, the incompatibility of these two polymers was suppressed. Laser light scattering (LLS) studies showed that highly entangled interpenetrating networks were formed in the solution. Further systematic investigation showed that double-stranded DNA separation was very good in these interpenetrating networks. With a concentration combination of as low as 2% w/v PVP (weight-average molecular mass Mr = 1 x 10(6) g/mol) + 1% w/v polyacrylamide (Mr = 4 x 10(5) g/mol), the 22 fragments in pBR322/HaeIII DNA, including the doublet of 123/124 bp, have been successfully separated within 6.5 min. Under the same separation conditions, similar resolution could only be achieved by using polyacrylamide (Mr = 4 x 10(5) g/mol) with concentrations higher than 6% w/v and could not be achieved by using only PVP (Mr = 1 x 10(6) g/mol) with a concentration as high as 15% w/v. It is noted that the interpenetrating network formed by 2% PVP and 1% polyacrylamide has a very low viscosity and can dynamically coat the inner wall of a fused-silica capillary. The separation reached an efficiency of more than 10(7) theoretical plate numbers/m and a reproducibility of less than 1% relative standard deviation of migration time in a total of seven runs. The interpenetrating network could stabilize polymer chain entanglements. Consequently, the separation speed was increased while retaining resolution.

Poly(N,N-dimethylacrylamide) (PDMA) with a molecular mass of 5.2 x 10(6) g/mol has been synthesized and used in DNA sequencing analysis by capillary electrophoresis (CE). A systematic investigation is presented on the effects of different separation conditions, such as injection amount, capillary inner diameter, polymer concentration, effective separation length, electric field and temperature, on the resolution. DNA sequencing up to 800 bases with a resolution (R) limit of 0.5 (and 1,000 bases with a resolution limit of 0.3) and a migration time of 96 min was achieved by using 2.5% w/v polymer, 150 V/cm separation electric field, and 60 cm effective separation length at room temperature on a DNA sample prepared with FAM-labeled--21M13 forward primer on pGEM3Zf(+) and terminated with ddCTP. Ultrafast and fast DNA sequencing up to 420 and 590 bases (R > or = 0.5) were also achieved by using 3% w/v polymer and 40 cm effective separation length with a separation electric field of 525 and 300 V/cm, and a migration time of 12.5 and 31.5 min, respectively. PDMA has low viscosity, long shelf life and dynamic coating ability to the glass surface. The unique properties of PDMA make it a very good candidate as a separation medium for large-scale DNA sequencing by capillary array electrophoresis (CAE).

The effect of the separation medium in capillary electrophoresis consisting of a low-molecular-mass poly(N,N-dimethylacrylamide) (PDMA) solution on the DNA separation by adding a small amount of montmorillonite clay into the polymer matrix is presented. On the separation of the pBR322/HaeIII digest, both the resolution and the efficiency were increased by adding 2.5-5.0 x 10(-5) g/mL clay into the 5% w/v PDMA with a molecular mass of only 100 K. Moreover, there was no increase in the migration time of DNA fragments. Similar results were observed by using a C-terminated pGEM-3Zf(+) sequencing DNA sample in a sequencing buffer. Experimental data also showed that the addition of clay increased the viscosity of the polymer solution. We attribute this effect to the structural change of the polymer matrix caused by the exfoliated clay sheets, whereby the thin clay sheets function like a "dynamic cross-linking plate" for the PDMA chains and effectively increase the apparent molecular mass of PDMA.

A mixture of two polyoxybutylene-polyoxyethylene-polyoxybutylene (BEB) triblock copolymers (B6E46B6 and B10E271B10, respectively) was used as a new separation medium for separating double-stranded DNA (dsDNA) fragments by capillary electrophoresis (CE). The two block copolymer mixtures were designed to form mixed flower-like micelles in dilute solution and a homogeneous gel-like open-network with hydrophobic clusters as cross-linking points at higher polymer concentrations. Being a polyoxyalkylene block copolymer gel, the separation medium has some special advantages, including the temperature-dependent sol-gel transition that makes sample injection easy, and the self-coating of the inner capillary wall that makes experimental procedures simple and reproducible. Furthermore, it can shorten the elution time and further improve the separation resolution, especially for small dsDNA fragments, when compared with EPE-type separation media, e.g., F127 (E99P69E99, with P being polyoxypropylene) block copolymer gels formed by the closed packing of spherical micelles. Single base pair resolution can be achieved by using the new separation medium for dsDNA fragments up to over 100 base pairs.

Copolymers of acrylamide (AM) and N,N-dimethylacrylamide (DMA) with AM to DMA molar ratios of 3:1, 2:1 and 1:1 and molecular weights of about 2.2 MDa were synthesized. The polymers were tested as separation media in DNA sequencing analysis by capillary electrophoresis (CE). The dynamic coating ability of polydimethylacrylamide (PDMA) and the hydrophilicity of polyacrylamide (PAM) have been successfully combined in these random copolymers. A separation efficiency of over 10 million theoretical plates per meter has been reached by using the bare capillaries without the additional polymer coating step. Under optimized separation conditions for longer read length DNA sequencing, the separation ability of the copolymers decreased with decreasing AM to DMA molar ratio from 3:1, 2:1 and 1:1. In comparison with PAM, the copolymer with a 3:1 AM:DMA ratio showed a higher separation efficiency. By using a 2.5% w/v copolymer with 3:1 AM:DMA ratio, one base resolution of 0.55 up to 699 bases and 0.30 up to 963 bases have been achieved in about 80 min at ambient temperatures.