Search

Bis-carbonylimidazolide (BCI) functionalization enables an efficient synthetic strategy to generate high molecular weight segmented nonisocyanate polyurethanes (NIPUs). Melt phase polymerization of ED-2003 Jeffamine , 4,4'-methylenebis(cyclohexylamine), and a BCI monomer that mimics a 1,4-butanediol chain extender enables polyether NIPUs that contain varying concentrations of hard segments ranging from 40 to 80 wt. %. Dynamic mechanical analysis and differential scanning calorimetry reveal thermal transitions for soft, hard, and mixed phases. Hard segment incorporations between 40 and 60 wt. % display up to three distinct phases pertaining to the poly(ethylene glycol) (PEG) soft segment T g , melting transition, and hard segment T g , while higher hard segment concentrations prohibit soft segment crystallization, presumably due to restricted molecular mobility from the hard segment. Atomic force microscopy allows for visualization and size determination of nanophase-separated regimes, revealing a nanoscale rod-like assembly of HS. Small-angle X-ray scattering confirms nanophase separation within the NIPU, characterizing both nanoscale amorphous domains and varying degrees of crystallinity. These NIPUs, which are synthesized with BCI monomers, display expected phase separation that is comparable to isocyanate-derived analogues. This work demonstrates nanophase separation in BCI-derived NIPUs and the feasibility of this nonisocyanate synthetic pathway for the preparation of segmented PU copolymers., (© 2024 Wiley‐VCH GmbH.)

Herein, we present a facile synthetic process for producing biomass-derived isosorbide (ISB) dioxides using dimethyl dioxirane (DMDO) as an efficient oxidizing agent, which was generated in situ from acetone and KHSO 5 . To achieve high conversion and product yield, the KHSO 5 concentration, KHSO 5 flow rate, and reaction temperature were optimized. Under the optimal conditions, rapid and efficient epoxidation using the in situ-generated DMDO was observed under ultrasonication, yielding the desired product within 35 min at 0 °C. This study offers a convenient and efficient method for generating biomass-derived ISB building blocks, which have significant potential for the fabrication of bioplastics., (© 2023 The Authors. Chemistry - An Asian Journal published by Wiley-VCH GmbH.)

A series of calcined Chitosan (CS) photothermal catalysts are prepared by heating the biopolymer at different temperatures. The photothermal conversion (light to heat) ability of these calcined CS materials is evaluated by measuring the temperature change with respect to time and lamp power. The material prepared at 300 °C (Cal-CS-300) shows excellent photothermal conversion ability which is explored for the CO 2 cycloaddition reaction with epoxides to produce cyclic carbonates under mild reaction parameters (1 atm CO 2 pressure, 25 °C). The study reveals the importance of defects present in the material on both photothermal conversion and CO 2 fixation efficiency. Under optimized reaction conditions, Cal-CS-300 is able to convert a range of epoxides into their respective cyclic carbonates (>97 % selectivity) and retains its catalytic activity (~86 %) for 5 cycles of catalysis without losing its chemical integrity. The use of ubiquitously available biopolymer together with light makes this approach sustainable for preparing value added chemicals., (© 2023 Wiley-VCH GmbH.)

Polyurethanes (PUs) are a class of materials usually synthesized from isocyanates, diols, and water. Water is essential for producing carbon dioxide (CO 2 ) which is used for the self-blowing of the foams. Due to safety concerns with the production of isocyanates, alternative chemistries have been evaluated and cyclic carbonate systems have shown great promise. In a recent advancement by Bourguignon, Grignard, and Detrembleur, a cyclic carbonate and diamine system is capable of generating CO 2 for self-blowing through hydrolysis of the carbonate-based monomer. The authors demonstrate that with a simple variation of the diamine monomer a wide range of physical and thermo-mechanical properties were achievable. This work represents a significant step towards safer and more environmentally friendly PUs., (© 2023 Wiley-VCH GmbH.)

For 80 years, polyisocyanates and polyols were central building blocks for the industrial fabrication of polyurethane (PU) foams. By their partial hydrolysis, isocyanates release CO 2 that expands the PU network. Substituting this toxic isocyanate-based chemistry by a more sustainable variant-that in situ forms CO 2 by hydrolysis of a comonomer-is urgently needed for producing greener cellular materials. Herein, we report a facile, up-scalable process, potentially compatible to existing infrastructures, to rapidly prepare water-induced self-blown non-isocyanate polyurethane (NIPU) foams. We show that formulations composed of poly(cyclic carbonate)s and polyamines furnish rigid or flexible NIPU foams by partial hydrolysis of cyclic carbonates in the presence of a catalyst. By utilizing readily available low cost starting materials, this simple but robust process gives access to greener PU foams, expectedly responding to the sustainability demands of many sectors., (© 2022 Wiley-VCH GmbH.)

Today, plastics are ubiquitous in everyday life, problem solvers of modern technologies, and crucial for sustainable development. Yet the surge in global demand for plastics of the growing world population has triggered a tidal wave of plastic debris in the environment. Moving from a linear to a zero-waste and carbon-neutral circular plastic economy is vital for the future of the planet. Taming the plastic waste flood requires closing the carbon loop through plastic reuse, mechanical and molecular recycling, carbon capture, and use of the greenhouse gas carbon dioxide. In the quest for eco-friendly products, plastics do not need to be reinvented but tuned for reuse and recycling. Their full potential must be exploited regarding energy, resource, and eco-efficiency, waste prevention, circular economy, climate change mitigation, and lowering environmental pollution. Biodegradation holds promise for composting and bio-feedstock recovery, but it is neither the Holy Grail of circular plastics economy nor a panacea for plastic littering. As an alternative to mechanical downcycling, molecular recycling enables both closed-loop recovery of virgin plastics and open-loop valorization, producing hydrogen, fuels, refinery feeds, lubricants, chemicals, and carbonaceous materials. Closing the carbon loop does not create a Perpetuum Mobile and requires renewable energy to achieve sustainability., (© 2022 The Authors. Macromolecular Rapid Communications published by Wiley-VCH GmbH.)

Polyurethane (PU) foams are very common materials that have found many applications over the years. Their use is constantly improving due to their unique physical properties and easy blowing which does not require the addition of a blowing agent. Greener routes have been explored in the recent years to replace isocyanates. One of the most promising routes is leading to polyhydroxyurethanes (PHU). However, with PHUs, external blowing agent are usually required to obtain a foam. Thus, the work focuses on PHU foam synthesis using in situ reaction to produce NIPU foam. Hence, the aminolysis of thiocyclic carbonate triggers Pearson reaction between released thiols and cyclic carbonates which serves as a chemical blowing agent., (© 2022 Wiley-VCH GmbH.)

1,1'-Carbonyldiimidazole (CDI) provides a platform to generate high molecular weight polyurethanes from industrially relevant diols and diamines. CDI, which is described in the literature for its use in amidation and functionalization reactions, enables the production of well-defined and stable polyurethane precursors, thus eliminating the need for isocyanates. Herein, the functionalization of 1,4-butanediol with CDI yields an electrophilic biscarbamate, bis-carbonylimidazolide (BCI), which is suitable for further step-growth polymerization in the presence of amines. Elevated reaction temperatures enable the solvent-, catalyst-, and isocyanate-free polycondensation reaction between the BCI monomer and various diamines. The thermoplastic polyurethanes produced from this reaction demonstrate high thermal stability, tunable glass transition temperatures based on incorporation of flexible polyether segments, and mechanically ductile thin films. CDI functionalized diols will allow the preparation of diverse polyurethanes without the use of isocyanate-containing monomers., (© 2021 Wiley-VCH GmbH.)

New and emerging demand for polyurethane (PU) continues to rise over the years. The harmful isocyanate binding agents and their integrated PU products are at the height of environmental concerns, in particular PU (macro and micro) pollution and their degradation problems. Non-isocyanate poly(hydroxy urethane)s (NIPUs) are sustainable and green alternatives to conventional PUs. Since the introduction of NIPU in 1957, the market value of NIPU and its hybridized materials has increased exponentially in 2019 and is expected to continue to rise in the coming years. The secondary hydroxyl groups of these NIPU's urethane moiety have revolutionized them by allowing for adequate pre/post functionalization. This minireview highlights different strategies and advances in pre/post-functionalization used in biobased NIPU. We have performed a comprehensive evaluation of the development of new ideas in this field to achieve more efficient synthetic biobased hybridized NIPU processes through selective and kinetic understanding., (© 2021 Wiley-VCH GmbH.)

Waste-derived fish oil (FO) can be epoxidized and reacted with CO 2 to produce a cyclic carbonate containing material. Upon reaction with a bioderived amine, this leads to the formation of nonisocyanate polyurethane materials. The FO used is extracted from the by-products produced at fish processing plants, including heads, bones, skin, and viscera. Three different methods are used for the epoxidation of the FO: (i) oxidation by 3-chloroperoxybenzoic acid, (ii) oxidation by hydrogen peroxide and acetic acid, catalyzed by sulfuric acid, and (iii) oxidation by hydrogen peroxide catalyzed by formic acid. Synthesized FO epoxides are reacted with CO 2 to yield FO cyclic carbonates with high conversions. The products are characterized by 1 H and 13 C NMR spectroscopy, IR spectroscopy, thermogravimetric analysis, and viscometry. Using a biomass-derived amine, nonisocyanate polyurethane materials are synthesized. This process can lead to new opportunities in waste management, producing valuable materials from a resource that is otherwise underutilized., (© 2020 Wiley-VCH GmbH.)

Polyurethane (PU) foams are indisputably daily essential materials found in many applications, notably for comfort (for example, matrasses) or energy saving (for example, thermal insulation). Today, greener routes for their production are intensively searched for to avoid the use of toxic isocyanates. An easily scalable process for the simple construction of self-blown isocyanate-free PU foams by exploiting the organocatalyzed chemo- and regioselective additions of amines and thiols to easily accessible cyclic carbonates is described. These reactions are first validated on model compounds and rationalized by DFT calculations. Various foams are then prepared and characterized in terms of morphology and mechanical properties, and the scope of the process is illustrated by modulating the composition of the reactive formulation. With impressive diversity and accessibility of the main components of the formulations, this new robust and solvent-free process could open avenues for construction of more sustainable PU foams, and offers the first realistic alternative to the traditional isocyanate route., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

This review provides a brief overview of the development of data-independent acquisition (DIA) mass spectrometry-based proteomics and selected DIA data analysis tools. Various DIA acquisition schemes for proteomics are summarized first including Shotgun-CID, DIA, MS E , PAcIFIC, AIF, SWATH, MSX, SONAR, WiSIM, BoxCar, Scanning SWATH, diaPASEF, and PulseDIA, as well as the mass spectrometers enabling these methods. Next, the software tools for DIA data analysis are classified into three groups: library-based tools, library-free tools, and statistical validation tools. The approaches are reviewed for generating spectral libraries for six selected library-based DIA data analysis software tools which are tested by the authors, including OpenSWATH, Spectronaut, Skyline, PeakView, DIA-NN, and EncyclopeDIA. An increasing number of library-free DIA data analysis tools are developed including DIA-Umpire, Group-DIA, PECAN, PEAKS, which facilitate identification of novel proteoforms. The authors share their user experience of when to use DIA-MS, and several selected DIA data analysis software tools. Finally, the state of the art DIA mass spectrometry and software tools, and the authors' views of future directions are summarized., (© 2020 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

An aminopyridinium ionic liquid is presented as a green, tunable, and active metal-free one-component catalytic system for the atom-efficient transformation of oxiranes and CO 2 to cyclic carbonates. Inclusion of a positively charged moiety into aminopyridines, through a simple single-step synthesis, provides a one-component ionic liquid catalytic system with superior activity; effective in ring opening of epoxide, CO 2 inclusion, and stabilization of oxoanionic intermediates. An efficiency assessment of a variety of positively charged aminopyridines was pursued, and the impact of temperature, catalyst loading, and the kind of nucleophile on the catalytic performance was also investigated. Under solvent-free conditions, this bifunctional organocatalytic system was used for the preparation of 18 examples of cyclic carbonates from a broad range of alkyl- and aryl-substituted oxiranes and CO 2 , where up to 98 % yield and high selectivity were achieved. DFT calculations validated a mechanism in which nucleophilic ring-opening and CO 2 inclusion occur simultaneously towards cyclic carbonate formation., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The rising concerns of the recurrence and bone deficiency in surgical treatment of malignant bone tumors have raised an urgent need of the advance of multifunctional therapeutic platforms for efficient tumor therapy and bone regeneration. Herein, the construction of a multifunctional biomaterial system is reported by the integration of 2D Nb 2 C MXene wrapped with S-nitrosothiol (RSNO)-grafted mesoporous silica with 3D-printing bioactive glass (BG) scaffolds (MBS). The near infrared (NIR)-triggered photonic hyperthermia of MXene in the NIR-II biowindow and precisely controlled nitric oxide (NO) release are coordinated for multitarget ablation of bone tumors to enhance localized osteosarcoma treatment. The in situ formed phosphorus and calcium components degraded from BG scaffold promote bone-regeneration bioactivity, augmented by sufficient blood supply triggered by on-demand NO release. The tunable NO generation plays a crucial role in sequential adjuvant tumor ablation, combinatory promotion of coupled vascularization, and bone regeneration. This study demonstrates a combinatory osteosarcoma ablation and a full osseous regeneration as enabled by the implantation of MBS. The design of multifunctional scaffolds with the specific features of controllable NO release, highly efficient photothermal conversion, and stimulatory bone regeneration provides an intriguing biomaterial platform for the diversified treatment of bone tumors., (© 2020 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)