Search

Nanobubble nucleation study is important for understanding the dynamic behavior of nanobubble growth, which is instructive for the nanobubble applications. Benefiting from nanopore fabrication, herein, we fabricated a sub-9 nm SiN X nanopore with the comparable size to nanobubbles at early-stage. The confined nanopore interface serves as a generator for producing nanobubbles by the chemical reaction between NaBH 4 and H 2 O and as an ultra-sensitive sensor for monitoring the H 2 nanobubble nucleation process. By carrying out the NaBH 4 concentration-dependent experiments, we found the life-time of nanobubbles decreased 250 times and the frequency of nanobubble generation increased 38 times with the NaBH 4 concentration increasing from 6 to 100 mM. The long-time equilibrium between gas molecules inward flux and outward flux could prolong the life-time of nanobubbles to hundreds of milliseconds at low NaBH 4 concentration. The raw current trace depicted that the transient accumulation and dissolution of cavity occurred during all the life-time of nanobubbles. Therefore, the sub-9 nm SiN X nanopore shows a strong ability for real-time monitoring the nanobubble nucleation at early-stage with high temporal and spatial resolution. This work provides a guide to study the dynamic and stochastic characteristics of nanobubbles., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Promoting the hydrogen oxidation reaction (HOR) activity and poisoning tolerance of electrocatalysts is crucial for the large-scale application of hydrogen-oxygen fuel cell. However, it is severely hindered by the scaling relations among different intermediates. Herein, lattice-contracted Pt-Rh in ultrasmall ternary L1 2 -(Pt 0.9 Rh 0.1 ) 3 V intermetallic nanoparticles (~2.2 nm) were fabricated to promote the HOR performances through an oxides self-confined growth strategy. The prepared (Pt 0.9 Rh 0.1 ) 3 V displayed 5.5/3.7 times promotion in HOR mass/specific activity than Pt/C in pure H 2 and dramatically limited activity attenuation in 1000 ppm CO/H 2 mixture. In situ Raman spectra tracked the superior anti-CO* capability as a result of compressive strained Pt, and the adsorption of oxygen-containing species was promoted due to the dual-functional effect. Further assisted by density functional theory calculations, both the adsorption of H* and CO* on (Pt 0.9 Rh 0.1 ) 3 V were reduced compared with that of Pt due to lattice contraction, while the adsorption of OH* was enhanced by introducing oxyphilic Rh sites. This work provides an effective tactic to stimulate the electrocatalytic performances by optimizing the adsorption of different intermediates severally., (© 2024 Wiley-VCH GmbH.)

The short history of research on Li-O 2 batteries has seen a remarkable number of mechanistic U-turns over the years. From the initial use of carbonate electrolytes, that were then found to be entirely unsuitable, to the belief that (su)peroxide was solely responsible for degradation, before the more reactive singlet oxygen was found to form, to the hypothesis that capacity depends on a competing surface/solution mechanism before a practically exclusive solution mechanism was identified. Herein, we argue for an ever-fresh look at the reported data without bias towards supposedly established explanations. We explain how the latest findings on rate and capacity limits, as well as the origin of side reactions, are connected via the disproportionation (DISP) step in the (dis)charge mechanism. Therefrom, directions emerge for the design of electrolytes and mediators on how to suppress side reactions and to enable high rate and high reversible capacity., (© 2023 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

The concept of encoding molecular information in bulk metals has been proposed over the past decade. The structure of various types of molecules, including enantiomers, can be imprinted in achiral substrates. Typically, to encode metals with chiral information, several approaches, based on chemical and electrochemical concepts, can be used. In this Minireview, recent achievements with respect to the development of such materials are discussed, including the entrapment of chiral biomolecules in metals, the chiral imprinting of metals, as well as the combination of imprinting with nanostructuring. The features and potential applications of these designer materials, such as chirooptical properties, enantioselective adsorption and separation, as well as their use for asymmetric synthesis will be presented. This will illustrate that the development of molecularly encoded metal structures opens up very interesting perspectives, especially in the frame of chiral technologies., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Multi-target histone deacetylase (HDAC) inhibitors can be designed by introducing dominant structures of natural products to enhance activity and efficacy while avoiding the toxicity from other targets. In this study, we reported a series of novel HDAC inhibitors based on erianin and amino erianin upon pharmacophore fusion strategy. Two representative compounds, N-hydroxy-2-(2-methoxy-5- (3,4,5-trimethoxyphenethyl)phenoxy)acetamide and N-Hydroxy-8-((2-methoxy-5- (3,4,5-trimethoxyphenethyl)phenyl)amino)octanamide, possessed good inhibitory effect against five cancer cells tested (IC 50 =0.30-1.29 μΜ, 0.29-1.70 μΜ) with strong HDAC inhibition, and low toxicity toward L02 cells, which were selected for subsequent biological studies in PANC-1 cells. They were also found to promote the intracellular generation of reactive oxygen species, cause DNA damage, block the cell cycle at G2/M phase, and activate the mitochondria-related apoptotic pathway to induce cell apoptosis, which are significant for the discovery of new HDAC inhibitors., (© 2023 Wiley-VCH GmbH.)

Noble metal nanostructured films are of great interest for various applications including electronics, photonics, catalysis, and photocatalysis. Yet, structuring and patterning noble metals, especially those of the platinum group, is challenging by conventional nanofabrication. Herein, an approach based on solution processing to obtain metal-based films (rhodium, ruthenium (Ru) or iridium in the presence of residual organic species) with nanostructuration at the 20 nm-scale is introduced. Compared to existing approaches, the dual functionality of block-copolymers acting both as structuring and as reducing agent under inert atmosphere is exploited. A set of in situ techniques has allowed for the capturing of the carbothermal reduction mechanism occurring at the hybrid organic/inorganic interface. Differently from previous literature, a two-step reduction mechanism is unveiled with the formation of a carbonyl intermediate. From a technological point of view, the materials can be solution-processed on a large scale by dip-coating as polymers and simultaneously structured and reduced into metals without requiring expensive equipment or treatments in reducing atmosphere. Importantly, the metal-based films can be patterned directly by block-copolymer lithography or by soft-nanoimprint lithography on various substrates. As proof-of-concept of application, the authors demonstrate that nanostructured Ru films can be used as efficient catalysts for H 2 generation into microfluidic reactors., (© 2021 Wiley-VCH GmbH.)

The development of heterogeneous catalysts for asymmetric synthesis is one of the most challenging topics in chemistry, as it allows obtaining enantiomerically pure compounds. Recently, metal layers incorporating molecular chiral cavities, obtained by electroreduction of a metal source in the simultaneous presence of a non-ionic surfactant and asymmetric molecules, have been proposed for a wide range of applications, including enantioselective electroanalysis and electrosynthesis, as well as chiral separation. In contrast to this previous work, solely based on electrochemical phenomena, herein we designed and employed nanostructured chiral encoded Pt-Ir alloys, supported on high surface area nickel foams, as heterogeneous catalysts for the asymmetric hydrogenation of aromatic ketones. Fine-tuning the experimental conditions allows achieving very high enantioselectivity (>80%), combined with improved catalyst stability., (© 2021 Wiley-VCH GmbH.)

Self-assembled block copolymers are promising templates for fabricating thin film materials with tuned periodic feature sizes and geometry at the nanoscale. Here, a series of nanostructured platinum and iridium oxide electrocatalysts templated from poly(styrene)-block-poly(vinyl pyridine) (PSbPVP) block copolymers via an incipient wetness impregnation (IWI) pathway is reported. Both nanowire and nanocylinder electrocatalysts of varying feature sizes are assessed and higher catalyst loadings are achieved by the alkylation of the pyridine moieties in the PVP block prior to IWI. Electrocatalyst evaluations featuring hydrogen pump and water electrolysis demonstrations are carried out on interdigitated electrode (IDE) chips flexible with liquid supporting electrolytes and thin film polymer electrolytes. Notably, the mass activities of the nanostructured electrocatalysts from alkylated block copolymer templates are 35%-94% higher than electrocatalysts from non-alkylated block copolymer templates. Standing cylinder nanostructures lead to higher mass activities than lamellar variants despite their not having the largest surface area per unit catalyst loading demonstrating that mesostructure architectures have a profound impact on reactivity. Overall, IDE chips with model thin film electrocatalysts prepared from self-assembled block copolymers offer a high-throughput experimental method for correlating electrocatalyst nanostructure and composition to electrochemical reactivity., (© 2021 Wiley-VCH GmbH.)

The structure of the double layer on the boundary between solid and liquid phases is described by various models, of which the Stern-Gouy-Chapman model is still commonly accepted. Generally, the solid phase is charged, which also causes the distribution of the electric charge in the adjacent diffuse layer in the liquid phase. We propose a new mathematical model of electromigration considering the high deviation from electroneutrality in the diffuse layer of the double layer when the liquid phase is composed of solution of weak multivalent electrolytes of any valence and of any complexity. The mathematical model joins together the Poisson equation, the continuity equation for electric charge, the mass continuity equations, and the modified G-function. The model is able to calculate the volume charge density, electric potential, and concentration profiles of all ionic forms of all electrolytes in the diffuse part of the double layer, which consequently enables to calculate conductivity, pH, and deviation from electroneutrality. The model can easily be implemented into the numerical simulation software such as Comsol. Its outcome is demonstrated by the numerical simulation of the double layer composed of a charged silica surface and an adjacent liquid solution composed of weak multivalent electrolytes. The validity of the model is not limited only to the diffuse part of the double layer but is valid for electromigration of electrolytes in general., (© 2020 Wiley-VCH GmbH.)

Mesoporous noble metals and their patterning techniques for obtaining unique patterned structures are highly attractive for electrocatalysis, photocatalysis, and optoelectronics device applications owing to their expedient properties such as high level of exposed active locations, cascade electrocatalytic sites, and large surface area. However, patterning techniques for mesoporous substrates are still limited to metal oxide and silica films, although there is growing demand for developing techniques related to patterning mesoporous metals. In this study, the first demonstration of mesoporous metal films on patterned gold (Au) substrates, prefabricated using photolithographic techniques, is reported. First, different growth rates of mesoporous Au metal films on patterned Au substrates are demonstrated by varying deposition times and voltages. In addition, mesoporous Au films are also fabricated on various patterns of Au substrates including stripe and mesh lines. An alternative fabrication method using a photoresist insulating mask also yields growth of mesoporous Au within the patterning. Moreover, patterned mesoporous films of palladium (Pd) and palladium-copper alloy (PdCu) are demonstrated on the same types of substrates to show versatility of this method. Patterned mesoporous Au films (PMGFs) show higher electrochemically active surface area (ECSA) and higher sensitivity toward glucose oxidation than nonpatterned mesoporous Au films (NMGF)., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)