Search

Understanding glaciers structural heterogeneity is crucial for assessing their fate. Yet, places where structure changes are strong, such as crevasses fields, are often inaccessible for direct instrumentation. To overcome this limitation, we introduce an innovative technique that transforms seismic sources, here generated by crevasses, into virtual receivers using source‐to‐receiver spatial reciprocity. We demonstrate that phase interference patterns between well‐localized seismic sources can be leveraged to retrieve phase velocity maps using Seismic Michelson Interferometry. The obtained phase velocity exhibits sensitivity to changes in glacier structure, offering insights into the origins of mechanical property changes, with spatial resolution surpassing traditional methods by a factor of five. In particular, we observe sharp variations in phase velocity related to strongly damaged subsurface areas indicating a complex 3‐D medium. Applying this method more systematically and in other contexts will enhance our understanding of the structure of glaciers and other seismogenic environments. Key Points: We transform seismic sources from crevasses into virtual receivers using source‐to‐receiver spatial reciprocityWe derive phase velocity maps in previously inaccessible areas with a resolution five times larger than traditional approachesWe retrieve the influence of glacier geometry and structural heterogeneity on the glacier mechanical properties [ABSTRACT FROM AUTHOR]

Herein, fast fracture initiation in glacier ice is modeled using a Material Point Method and a simplified constitutive law describing tensile strain softening. Relying on a simple configuration where ice flows over a vertical step, crevasse patterns emerge and are consistent with previous observations reported in the literature. The model's few parameters allows identification of a single dimensionless number controlling fracture spacing and depth. This scaling law delineates two regimes. In the first one, ice thickness does not play a role and only ice tensile strength controls the spacing, giving rise to numerous surface crevasses, as observed in crevasse fields. In this regime, scaling can recover classical values for ice tensile strength from macroscopic field observations. The second regime, governed by ice bending, produces large‐scale, deep fractures resembling serac falls or calving events. Plain Language Summary: In ice sheets and alpine glaciers, fast‐flowing sections are often characterized by crevasse fields that play a significant role in the cryo‐hydrologic system by facilitating meltwater flow, enhancing basal sliding, weakening the ice, and impacting glacier thermodynamics. Modeling these fractures at the glacier scale remains challenging and often necessitates integrating diverse models which hinders the straightforward consideration of physical issues associated with crevasse fields on a large scale. Here, a new numerical framework allows us to conduct field‐scale experiments and paves the way for a scaling law to elucidate the macroscopic factors influencing fracture fields and to easily incorporate crevasse depth and spacing into large‐scale models. A newly discovered scaling law highlights the transition between a mechanical behavior where the regular crevasse spacing is unaffected by geometry to a regime where geometry plays a significant role, particularly in large‐scale fracture processes like glacier calving. While the numerical experiments in this paper focus on glaciers, the model and conceptual framework is versatile and can address the mechanical behavior of fractures in broader geophysical contexts such as snow, rock or ice avalanches, tectonics and landslides. Key Points: Fractures in glacier flow are modeled using material point method with elastoplasticity and tensile strain softeningA dimensional analysis reveals a key dimensionless number characterizing two different regimes of fast fractureOne regime predicts acknowledged ice tensile strength from field observations and characterizes the regular crevasse spacing [ABSTRACT FROM AUTHOR]

Ice cliff distribution plays a major role in determining the melt of debris‐covered glaciers but its controls are largely unknown. We assembled a data set of 37,537 ice cliffs and determined their characteristics across 86 debris‐covered glaciers within High Mountain Asia (HMA). We find that 38.9% of the cliffs are stream‐influenced, 19.5% pond‐influenced and 19.7% are crevasse‐originated. Surface velocity is the main predictor of cliff distribution at both local and glacier scale, indicating its dependence on the dynamic state and hence evolution stage of debris‐covered glacier tongues. Supraglacial ponds contribute to maintaining cliffs in areas of thicker debris, but this is only possible if water accumulates at the surface. Overall, total cliff density decreases exponentially with debris thickness as soon as the debris layer reaches a thickness of over 10 cm. Plain Language Summary: Debris‐covered glaciers are common throughout the world's mountain ranges and are characterized by the presence of steep ice cliffs among the debris‐covered ice. It is well‐known that the cliffs are responsible for a large portion of the melt of these glaciers but the controls on their formation, development and distribution across glaciers remains poorly understood. Novel mapping approaches combined with high‐resolution satellite and drone products enabled us to disentangle some of these controls and to show that the ice cliffs are generally formed and maintained by the surface hydrology (ponds or streams) or by the opening of crevasses. As a result, they depend both at the local and glacier scale on the dynamic state of the glaciers as well as the evolution stage of their debris cover. This provides a pathway to better represent their contribution to glacier melt in predictive glacier models. Key Points: We derived an unprecedented data set of 37,537 ice cliffs and their characteristics across 86 debris‐covered glaciers in High Mountain AsiaWe find that 38.9% of the cliffs are stream‐influenced, 19.5% pond‐influenced and 19.7% are crevasse‐originatedIce cliff distribution can be predicted by velocity, as an indicator of the dynamics and state of evolution of debris‐covered glaciers [ABSTRACT FROM AUTHOR]

A subglacial groundwater system beneath Taylor Glacier, Antarctica, discharges hypersaline, iron‐rich brine episodically at the glacier surface to create Blood Falls. However, the triggering mechanism for these brine release events is not yet understood. Identifying which fracture processes are observed seismically can help us better characterize the hydrological system at Taylor Glacier, and more generally, provide us with a broader understanding of englacial hydrologic activity in cold glaciers. We document wintertime brine discharge using time‐lapse photography. Subfreezing air temperatures during the brine discharge indicate that surface melt‐induced hydrofracture is an unlikely trigger for brine release. Further, we analyze local seismic data to test a hypothesis that fracturing generates elevated surface wave energy preceding and/or coinciding with brine release events. Our results show no discernible elevated Rayleigh wave activity prior to or during Blood Falls brine release. Instead, we find a pattern of seismic events dominated by a seasonal signal, with more Rayleigh events occurring in the summer than the winter from the Blood Falls source area. We calculate that the volumetric opening of cracks that would generate Rayleigh waves at our detection limits are of similar size to myriad cracks in glacier ice, lake ice, and frozen sediment in the terminus area. We therefore propose that any fracturing coincident with brine release activity likely consists of a series of smaller opening events that are masked by other seismicity in the local environment. Plain Language Summary: Blood Falls is a reddish feature that forms at the terminus of Taylor Glacier in Antarctica when hypersaline, iron‐rich brine flows from sediment under the glacier up through the ice to emerge from cracks at the surface. We used data from a time‐lapse camera and nearby seismic sensors to document a brine release. Our images show a brine release event starting in May 2014 (austral winter), and fractures in the glacier surface observed following the event encouraged us to hypothesize that we would detect an increase in Rayleigh waves (a type of seismic wave that can be generated by surface crack opening). However, we do not observe an increase in Rayleigh wave activity prior to or during brine release. When we estimate the average size of the fractures that we detect, we find the size is similar to many types of cracks in the nearby environment (for instance, cracks in the lake ice). We conclude that any Rayleigh wave seismicity that occurred during the Blood Falls brine release must be from a series of crack openings smaller than our detection limit, and that other cracks opening in the nearby environment may mask any signal specific to the Blood Falls release. Key Points: Time‐lapse photos capture wintertime Blood Falls brine releaseBrine release occurs without evidence for enhanced Rayleigh wave seismicity near the release pointThe Blood Falls crack may open as a series of small fracture events, masked by local seismicity [ABSTRACT FROM AUTHOR]

Surface crevasses on the Greenland Ice Sheet (GrIS) capture nearly half of the seasonal runoff, yet their role in transferring meltwater to the bed has received little attention relative to that of supraglacial lakes and moulins. Here, we present observations of crevasse ponding and investigate controls on their hydrological behavior at a fast‐moving, marine‐terminating sector of the GrIS. We map surface meltwater, crevasses, and surface‐parallel stress across a ∼2,700 km2 region using satellite data and contemporaneous uncrewed aerial vehicle (UAV) surveys. From 2017 to 2019 an average of 26% of the crevassed area exhibited ponding at locations that remained persistent between years despite rapid advection. We find that the spatial distribution of ponded crevasses does not relate to previously proposed controls on the distribution of supraglacial lakes (elevation and topography) or crevasses (von Mises stress thresholds), suggesting the operation of some other physical control(s). Ponded crevasse fields were preferentially located in regions of compressive surface‐parallel mean stress, which we interpret to result from the hydraulic isolation of these systems. This contrasts with unponded crevasse fields, which we suggest are readily able to transport meltwater into the wider supraglacial and englacial network. UAV observations show that ponded crevasses can drain episodically and rapidly, likely through hydrofracture. We therefore propose that the surface stress regime influences a spatially heterogeneous transfer of meltwater through crevasses to the bed of ice sheets, with consequences for processes, such as subglacial drainage and the heating of ice via latent heat release by refreezing meltwater. Plain Language Summary: Surface crevasses on the Greenland Ice Sheet (GrIS) transfer nearly half of all the ice sheet's meltwater to the bed, yet when, where, and how this occurs is poorly understood. We use large‐scale satellite analysis and uncrewed aerial vehicle (UAV) surveys to assess the spatial variability of meltwater ponding in crevasses across a fast‐flowing sector of the western GrIS. Between 2017 and 2019 an average of a quarter of crevasse fields ponded, in roughly the same area every year. However, the locations of such ponding cannot be explained in the same way as supraglacial lakes, which collect in surface basins. Instead, we find that ponded crevasses exist in regions of compressive surface stress. We suggest that this is because compressive regimes close pathways that elsewhere allow crevasses to drain into the wider surface hydrological system. Using UAV surveys, we show that these ponded crevasses instead drain rapidly to the bed by hydrofracture. Differing drainage processes in regions of compressive and extensional regimes may have distinct consequences for subglacial drainage and the heating of the ice sheet due to energy release during meltwater refreezing. Key Points: At a marine‐terminating sector of the Greenland Ice Sheet, 26% of all crevasses ponded between 2017 and 2019; the rest remained unfilledPonded crevasse locations persist between years but, unlike supraglacial lakes, this distribution is not topographically controlledCrevasses pond in compressive stress regimes, likely due to hydraulic isolation by creep closure, and drain predominantly via hydrofracture [ABSTRACT FROM AUTHOR]

Natural levees are common features in river, delta and tidal landscapes. They are elevated near‐channel morphological features that determine the connection between channel and floodbasin, and consequently affect long‐term evolution up to delta‐scales. Despite their relevance in shaping fluvial‐tidal systems, research on levees is sparse and often limited to fluvial or non‐tidal case studies. There is also a general lack of understanding of the role of vegetation in shaping these geomorphic units, and how levee morphology and dimensions vary in the transition from fluvial to coastal environments, where tides are increasingly important. Our goal is to unravel the effects of fluvial‐tidal boundary conditions, sediment supply and vegetation on levee characteristics and floodbasin evolution. These conditions were systematically explored by 60 large‐scale idealized morphodynamic simulations in Delft3D which self‐developed levees over the course of one century. We compared our results to a global levee dataset compilation of natural levee dimensions. We found that levee height is determined by the maximum water level, provided sufficient levee building sediments are available. Discharge fluctuations increased levee width and triggered more levee breaches, i.e. crevasses, that effectively filled the fluvio‐tidal floodbasin. The presence of wood‐type (sparse) vegetation further increased the number of crevasses in comparison with the non‐vegetated scenarios. Conversely, reed‐type (dense) vegetation strongly dampened tidal amplitude and reduced the accommodation space and sedimentation further into the floodbasin, resulting in narrower levees, no crevasses and limited floodbasin accretion. However, dense vegetation reduced tidal forces which allowed levee growth further downstream. Ultimately, the levees merged with the coastal barrier, eliminating the floodbasin tides entirely. Our results elucidate the mechanisms by which levee and crevasse formation, and vegetation may fill fluvio‐tidal wetlands and affect estuary evolution. This brings new insights for geological reconstructions as well as for the future management of deltas and estuaries under sea‐level rise. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd [ABSTRACT FROM AUTHOR]

Abstract: Hypothesised lobe‐like flow of a temperate glacier in southeast Iceland, proposed from an analysis of ice surface crevassing patterns, is appraised from both empirical and theoretical perspectives. The hypothesis comprises the migration of individual lobes (or ‘pulses’) of ice through the glacier body, with central lobes migrating more rapidly along a narrow, central, ‘axial flow corridor’. Our alternative hypothesis is that crevasse patterns at this glacier reflect simple surface ice responses to stresses caused by flow over uneven bed topography. To substantiate our rejection of the lobe‐like, pulsed axial flow hypothesis, we provide: (a) evidence for a prominent transverse foliation that exhibits no evidence of shear of the required magnitude to support the hypothesis; and (b) an analysis of ice surface displacement, obtained by feature tracking, that shows a uniform flow field throughout the glacier tongue. We argue that caution needs to be exercised when interpreting glacier flow solely from crevasse patterns and observations of minor displacements along near‐surface fractures and other features. © 2018 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd. [ABSTRACT FROM AUTHOR]

Abstract: The impact of meltwater injection into the shear margins of Jakobshavn Isbræ via drainage from water‐filled crevasses on ice flow is examined. We use Landsat‐8 Operational Land Imager panchromatic, high‐resolution imagery to monitor the spatiotemporal variability of seven water‐filled crevasse ponds during the summers of 2013 to 2015. The timing of drainage from water‐filled crevasses coincides with an increase of 2 to 20% in measured ice velocity beyond Jakobshavn Isbræ shear margins, which we define as extramarginal ice velocity. Some water‐filled crevasse groups demonstrate multiple drainage events within a single melt season. Numerical simulations show that hydrologic shear weakening due to water‐filled crevasse drainage can accelerate extramarginal flow by as much as ~35% within 10 km of the margins and enhance mass flux through the shear margins by 12%. This work demonstrates a novel mechanism through which surface melt can influence regional ice flow. [ABSTRACT FROM AUTHOR]

Compression and crevasses are common cutting artefacts in cryo-ultramicrotomy of vitreous sections. They can be reduced or suppressed under optimal cutting conditions. In the present study, compression and thickness were measured for different cutting speeds and knife angles. It was found that compression decreased with feed and that crevasses appeared only above a certain thickness. The optimal feed for vitreous sections was between 50 and 80 nm. The thickness, calculated by two independent methods, was quantitatively related to feed and compression. [ABSTRACT FROM AUTHOR]

Summary A new oscillating cryo-knife for producing uncompressed vitreous sections is introduced. The knife is a modified cryo diamond knife that is driven by a piezo translator. Optimal setting for the oscillation was found to be in the inaudible frequency range of 20–25 kHz. Yeast cells and polystyrene spheres were used as model systems to describe compression in the vitreous sections. We found that compression could be reduced by a factor of about 2 when the knife was oscillating. When the oscillator was turned off, sections were compressed by 40–45%. However, only 15–25% compression was obtained when the knife was oscillating. In some cases completely uncompressed sections of yeast cells were produced. It was also found that the amount of compression depends on the specimen itself and on its embedding medium. With the results shown here, we demonstrate that the oscillating knife can produce high-quality vitreous sections with minimum cutting artefacts. [ABSTRACT FROM AUTHOR]