Search

The primary objective of the paper is the numerical and experimental investigation related to the damage recognition effects for CFRP tubes of four dynamic parameters. Four damage identification indexes consisting of natural frequency‐based index, Mode Shape‐based index (MS), Mode Shape Curvature‐based index (MSC), and Modal Flexibility Curvature‐based index (MFC) are established by analyzing the dynamic parameter data obtained before and after damage occurs. The performances of dynamic parameters are thoroughly discussed in the context of numerical simulations and experiment. The results indicate that the effect of natural frequency is not as significant as that of mode shape. MFC has the most notable effectiveness out of the four indexes. The simulation peak index pair is predicted to rise from 0.3 to 0.6 as the damage in the simulation model increases by 25% from 12.5%, indicating that MFC can feedback the damage degree. Moreover, the circumferential curvature index exhibits superior performance compared to the axial curvature index. To enhance the accuracy of the axial curvature index, it is proposed to increase the number of measuring sites along the tube's long direction. Highlights: Damage identification indexes of four dynamic parameters are established.Discuss the identification ability of dynamic parameters by simulation and test.Two numerical models of CFRP tube with delamination damage are established.Impact and modal tests are executed to study the ability of four indexes. [ABSTRACT FROM AUTHOR]

Owing to their excellent physical and chemical properties, the carbon fibre reinforced poly(ether‐ether‐ketone) composites (CF/PEEK) are widely used in aerospace applications such as rockets, missiles, and high‐speed vehicles. However, both carbon fibre (CF) and poly(ether‐ether‐ketone) (PEEK) have inert molecular chain structures, which seriously affect the interfacial properties of CF/PEEK composites. In this study, to improve the properties of CF/PEEK composites, carboxylated PEEK (PEEK‐COOH) with different carboxylation degrees is synthesized as the sizing agent by a "two‐step" method. Then, the activated CF surface is coated by PEEK‐COOH sizing layers with different functionalization degrees to prepare the CF/PEEK composites. The results show that the interfacial properties of CF/PEEK composites are improved after applying the sizing agent. When the carboxylation degree of PEEK‐COOH is 19.61%, the flexural strength, flexural modulus, and interlaminar shear strength (ILSS) of CF/PEEK composites reach 489.34 MPa, 25.387 GPa, and 81.3 MPa, respectively. In addition, the use of PEEK‐COOH sizing agents can form an excellent transition layer between CF and PEEK, creating an efficient stress transfer system and facilitating an even stress distribution between CF and PEEK. Furthermore, the main mechanism of material fracture changes from CF debonding to CF and resin fracture. [ABSTRACT FROM AUTHOR]

The resin matrix and CF fibers itself of CF/PEEK composites exhibit surface inertness, resulting in poor interface bonding between CF and PEEK matrix. This phenomenon seriously affects the mechanical properties of CF/PEEK composites especially the interlaminar shear strength (ILSS). In order to improve the interfacial properties of CF/PEEK composites, a novel sizing agent of CF fibers namely PPS‐NH2 was synthesized, and its influence on the fibers–matrix interface interaction and properties of CF/PEEK composites was investigated by using scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, atomic force microscopy. The results showed that the interface of CF/PEEK composite was improved by coating PPS‐NH2 sizing agent on the surface of CF. When the amination degree of PPS‐NH2 reaches 31.25%, the ILSS, flexural strength and modulus of CF/PEEK Composites reach 73.9 MPa (119%), 671.4 MPa (63%) and 32.8GPa (51%) and, respectively. At the same time, the main failure mechanism of CF/PEEK composites changes from fibers–matrix debonding into interface layer deformation and resin fracture. This method can effectively improve the interface defects between CF/PEEK composites. [ABSTRACT FROM AUTHOR]

As a high‐performance thermoplastic polymer, poly(ether‐ether‐ketone) (PEEK) has excellent thermal stability and mechanical properties; it is widely used in the aerospace field. However, PEEK has high viscosity, high processing temperature and poor fluidity in the molten state. In preparing carbon fibre (CF)/PEEK composites, poor impregnation performance will occur, resulting in high porosity and poor mechanical properties of the CF/PEEK composites. This mini‐review focuses on improving the interface of the CF/PEEK composite by coating the CF surface and introduces the preparation of CF/PEEK composites by coating CF with a resin‐based sizing agent, a mixed sizing agent and nanoparticles. Meanwhile, the properties of CF/PEEK composites prepared by different coating methods are compared. © 2022 Society of Industrial Chemistry. [ABSTRACT FROM AUTHOR]

To further improve the anti‐ablation property of boron phenolic resin (BPR), high‐temperature resistant reactive trisilanolheptaphenyl POSS (3OH‐POSS) was synthesized to modify BPR. The thermal stability of BPR was significantly improved. The initial decomposition temperature of the prepared 3OH‐POSS modified BPR (POSSBPR) was increased from 226.0 to 390.2°C and the chars at 800 and 1000°C was increased from 71.1 and 66.7% to 75.1 and 73.7%, respectively with 20% 3OH‐POSS addition. The prepared POSSBPR castings obtained linear ablation rate (LAR) and mass ablation rate (MAR) were as low as −0.122 mm/s and 0.0465 g/s. And the LAR and MAR of high silica fiber reinforced composites (HSC/POSSBPR) were 0.123 mm/s and 0.0602 g/s, respectively. Moreover, the mechanism of high‐temperature carbon microcrystalline and ceramic structure transformation, and ablation performance enhancement of POSSBPR were determined by X‐ray diffraction, X‐ray photoelectron spectroscopy, and Raman spectroscopy. Results indicated that the introduction of 3OH‐POSS promotes the formation of ordered graphite structure of BPR and forms high‐temperature species, such as SiC ceramic, on the ablated surface, which subsequently improves the ablation resistance of the material. [ABSTRACT FROM AUTHOR]

3,13‐Diglycidyloxypropyloctaphenyl double‐decker silsesquioxane (EP‐DDSQ) was synthesized by process of alkaline hydrolysis condensation of phenyltrimethoxysilane and corner capping reaction of methyldichlorosilane, followed by hydrosilylation with allyl glycidyl ether, and the resultant structure was confirmed by fourier transform infrared spectrometer (FTIR) and nuclear magnetic resonance (NMR), respectively. The thermosetting phenol‐formaldehyde (PF) resin was then modified by EP‐DDSQ, and the reactivity of PF resin with EP‐DDSQ and thermal pyrolysis of modified cured resin were investigated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The surface morphologies of modified resins at high temperature were characterized with field emission scanning electron microscope (FESEM), and chemical structure of modified resins was analyzed through X‐ray photoelectron spectrometer (XPS). The results showed that the appropriate addition of EP‐DDSQ did not affect the curing temperature of the PF resin itself, but could improve the heat resistance of the system. When the amount of EP‐DDSQ added was 10%, the initial degradation temperature of PF resin was increased by 49.31°C, and when the amount of EP‐DDSQ added was 16%, the char yield of which was reached up to 61.39%, compared with that of pure PF resin (TGA1,000°C of 57.62%) at Ar atmosphere. More importantly, the modified resin formed a regular and dense layer of SiC and SiOx ceramic on the surface after ablation in the muffle furnace at 800°C air atmosphere, which is very important for ablative resistant materials. [ABSTRACT FROM AUTHOR]

The article presents a study that dealt with the influence of oxygen plasma treatment on surface properties of poly(p-phenylene benzobisox-azole) (PBO) fibers and interfacial properties of PBO fiber reinforced poly(phthalazinone ether sulfone ketone). The study used X-ray photoelectron spectroscopy, Atomic force microscopy, and scanning electron microscopy to analyze surface chemical composition, and surface morphologies. Dynamic contact angle analysis enabled characterization of surface energy.