Search

A miniaturized, high‐selectivity, wideband A‐T‐A frequency selective rasorber (FSR) based on compact spiral resonators (CSR) is proposed here. The lossy layer of the FSR consists of the CSR and a Jerusalem cross, with four resistors soldered onto the surface. The underlying layer is a bandpass frequency selective surface (FSS) with an extremely narrow slit. The dimensions of the FSR unit are only 0.079 λL × 0.079 λL × 0.078 λL. The extremely narrow‐slitted FSS and CSR together provide a narrowband frequency response, enhancing the selectivity of the FSR. Additionally, a prototype of an FSR was fabricated and tested, achieving results highly consistent with simulations. [ABSTRACT FROM AUTHOR]

An ultra‐wideband and wide‐scan tightly coupled dipoles array based on frequency selective surface (FSS) is proposed, and the traditional wide‐angle scan impedance matching dielectric layer is replaced by FSS with printed metal strips to achieve the tuning of the scanning impedance of the array. Additionally, the metal strip FSS, dipole radiating elements and feeding structure are all printed on the same printed circuit board, and the whole design is highly integrated. Finally, a low‐cost lightweight single‐polarization tightly coupled antenna array with ultra‐wide band and wide scan performance is presented. Subject to the criterion of active Voltage standing Wave ratio(VSWR) < 3, beam scanning coverage of ±45° along E plane, H plane and D plane can be accomplished within the frequency band range across 0.4–2 GHz. An array prototype was produced and tested, and the results showed that the effectiveness of the design was well validated. [ABSTRACT FROM AUTHOR]