Search

When dealing with safety‐critical applications that involve multiphase permanent magnet synchronous motors (PMSMs), the current source inverter (CSI) is a superior choice compared with the voltage source inverter. The conventional technique of pulse width modulation (PWM) presents a challenge for CSI, particularly during faults. The fault‐tolerant control of multiphase PMSMs fed by CSIs has not been well investigated, particularly in situations involving double‐phase open‐circuit faults. Furthermore, fault‐tolerant control becomes more complex when the multiphase PMSM includes harmonic back electromotive forces (EMFs). To deal with these issues, an ampere‐second (AS) vector PWM technique is developed for a five‐phase PMSM powered by CSI11. The modulation ratio of the proposed PWM is identical to that of space vector PWM. The proposed method, however, is easier to implement. A fault‐tolerant control method using AS‐vector is proposed for single‐phase, adjacent double‐phase, and non‐adjacent double‐phase open‐circuit faults. Additionally, a method is developed to suppress the torque ripple that results from harmonic back‐EMFs during fault conditions. Compared without the torque ripple suppression method, during the speed rising, the proposed method can reduce torque ripple to 16.7%, 54.5%, and 37.5%, respectively. The experiments have confirmed the effectiveness of the proposed PWM technique and fault‐tolerant control method. [ABSTRACT FROM AUTHOR]

In interior permanent magnet synchronous motor (IPMSM) position‐sensorless drives, the high‐frequency (HF) square‐wave voltage injection method is often used to estimate the rotor position and speed in low‐speed range by tracking the salient polarity of the motor. In order to reduce the torque ripple caused by HF signal injection, a strategy to update the magnitude of the injected signal online by back propagation neural network is proposed in this paper. With the proposed method, the neural network can update the magnitude of the injected signal online according to the d‐axis current and the position error information. It can not only ensure the accuracy of position extraction but also effectively reduce the current harmonics caused by the injected signal, and then the torque ripple can be reduced. In addition, the proposed method is easy to implement, resulting in low computation burden. Finally, the experiments are implemented on a 1‐kW IPMSM drive. The experimental results show that compared with the conventional fixed magnitude injection, the peak‐to‐peak value of the torque ripple is reduced by nearly half along with the decrease of the injected magnitude. [ABSTRACT FROM AUTHOR]

Owing to the ferromagnetism and stray fields of inertial navigation system, component compensation of magnetic field distortion is significant for geomagnetic field vector measurement system. However, traditional scalar compensation methods cannot be used for component compensation of magnetic field distortion, so some improvement works have been researched for component compensation in the study, the major of which is estimating compensation parameters using the Lagrange multiplier method. Experiment results show that the performance of the component compensation method is much better than traditional scalar compensation method. After compensation, the maximal measurement errors of north, vertical, east components and total intensity caused by magnetic field distortion are reduced to 10.4 nT (0.91% of the raw error), 32.5 nT (5.20%), 12.9 nT (1.27%), and 18.4 nT (2.02%), respectively. In addition, compared with previous component compensation method, the proposed method has three advantages: (i) simplified equipment, (ii) easier operation process, and (iii) better generality. [ABSTRACT FROM AUTHOR]

A new regulatory class of small endogenous RNAs called circular RNAs (circRNAs) has been described as miRNA sponges in animals. Using 16 Arabidopsis thaliana RNA-Seq data sets, we identified 803 circRNAs in RNase R-/non-RNase R-treated samples. The results revealed the following features: Canonical and noncanonical splicing can generate circRNAs; chloroplasts are a hotspot for circRNA generation; furthermore, limited complementary sequences exist not only in introns, but also in the sequences flanking splice sites. The latter finding suggests that multiple combinations between complementary sequences may facilitate the formation of the circular structure. Our results contribute to a better understanding of this novel class of plant circRNAs. [ABSTRACT FROM AUTHOR]

Regulation of proteome diversity by alternative splicing has been widely demonstrated in plants and animals. NAGNAG splicing, which was recently defined as a tissue specific event, results in the production of two distinct isoforms that are distinguished by three nucleotides (NAG) as a consequence of the intron proximal or distal to the splice site. Since the NAGNAG mechanism is not well characterized, tools for the identification and quantification of NAGNAG splicing events remain under-developed. Here we report nagnag, an R-based NAGNAG splicing detection tool, which accurately identifies and quantifies NAGNAG splicing events using RNA-Seq. Overall, nagnag produces user-friendly visualization reports and highlights differences between the DNA/RNA/protein across the identified isoforms of the reported gene. The package is available on https://sourceforge.net/projects/nagnag/files/ ; or http://genome.sdau.edu.cn/research/software/nagnag.html . [ABSTRACT FROM AUTHOR]