Search

Abstract: Modular composites with a 3D periodic structure, consisting of a major brittle inorganic phase (building blocks) and a minor viscoelastic organic matrix, offer great potentials for improved fracture toughness and failure probability in polymer‐ceramic composites. Alumina building blocks with dimensions of 1500 μm were assembled by a novel placing system equipped with an automatic optical inspection (AOI) system. The AOI system coupled with shape recognition enables simultaneous dimensional characterization, tolerance sorting, and flexible placing of different shaped building blocks. 3D periodic structures with cubic, monoclinic, and triclinic unit cells were fabricated by high accuracy placing of cubic building blocks enabling near‐net shape manufacturing. The placing precision of the assembled structures was determined by μCT to have a maximum deviation of ±78 μm. The structures were afterward infiltrated with a soft epoxy resin to fabricate epoxy‐alumina composites. The brick‐and‐mortar like building block arrangements of the monoclinic and triclinic structures exhibited improved bending strength, fracture toughness, and failure probability compared to monolithic epoxy, due to crack deflection and pull‐out toughening mechanisms. A maximum bending strength of 35.1 ± 7.5 MPa, a work‐of‐fracture of 814.7 ± 255.1 J/m² and a calculated fracture toughness of 4.8 ± 0.8 MPa m for the triclinic structures was achieved. [ABSTRACT FROM AUTHOR] more...

Oxidation induced crack healing of Al2O3 composites loaded with a MAX phase based repair filler (Ti2Al0.5Sn0.5C) was examined. The fracture strength of 20 vol% repair filler loaded composites containing artificial indent cracks recovered fully to the level of the virgin material upon isothermal annealing in air atmosphere after 48 h at 700°C and 0.5 h at 900°C. SEM- EBSD analysis of crack microstructure indicates two different oxidation reaction regimes to govern the crack filling: near the surface SnO2, TiO2, and Al2O3 were formed whereas deeply inside the cracks Al2O3 and TiO2 and metallic Sn were detected. The presence of elemental Sn was attributed to partial oxidation of aluminum and titanium which lowered the local oxygen concentration below a threshold value required for Sn oxidation to SnO2. Thus, Ti2Al0.5Sn0.5C may represent an efficient repair filler system to trigger oxidation induced crack healing in ceramic composites at temperatures below 1000°C. [ABSTRACT FROM AUTHOR] more...