Search

Rising concerns over water scarcity, driven by industrialization and urbanization, necessitate the need for innovative solutions for wastewater treatment. This study focuses on developing an eco‐friendly and cost‐effective biochar‐zeolite composite (BZC) adsorbent using waste materials—spent coffee ground biochar (CGB) and steel slag zeolite (SSZ). Initially, the biochar was prepared from spent coffee ground, and zeolite was prepared from steel slag; their co‐pyrolysis resulted in novel adsorbent material. Later, the physicochemical characteristics of the BZC were examined, which showed irregular structure and well‐defined pores. Dye removal studies were conducted, which indicate that BZC adsorption reach equilibrium in 2 h, exhibiting 95% removal efficiency compared to biochar (43.33%) and zeolite (74.58%). Moreover, the removal efficiencies of the novel BZC composite toward dyes methyl orange (MO) and crystal violet (CV) were found to be 97% and 99.53%, respectively. The kinetic studies performed with the dyes and phosphate with an adsorbent dosage of 0.5 g L−1 suggest a pseudo‐second‐order model. Additionally, the reusability study of BZC proves to be effective through multiple adsorption and regeneration cycles. Initially, the phosphate removal remains high but eventually decreases from 92% to 70% in the third regeneration cycle, highlighting the robustness of the BZC. In conclusion, this study introduces a promising, cost‐effective novel BZC adsorbent derived from waste materials as a sustainable solution for wastewater treatment. Emphasizing efficiency, reusability, and potential contributions to environmentally conscious water treatment, the findings highlight the composite's significance in addressing key challenges for the removal of toxic pollutants from the aqueous solutions. Practitioner Points: A novel biochar‐zeolite composite (BZC) material has been synthesized.Excellent removal of dyes by BZC (~95%) was achieved as compared to their counterpartsThe kinetic studies performed suggest a pseudo‐second‐order model.BZC proves to be highly effective for multiple adsorption studies.Excellent reusability showed potential as a robust adsorbent [ABSTRACT FROM AUTHOR]

Owing to the high demand of petroleum and petrochemical products, refineries, among the many industries that are set up worldwide, are of special importance. Wastewater generated from such industrial activities, however, contains toxic compounds that are of environmental concern. Due to the presence of highly recalcitrant organics present in refinery wastewater, treatment prior to its discharge into the environment and water bodies in order to meet certain acceptable discharge limits is imperative. Petroleum refineries unavoidably discharge a large volume of wastewater mainly with high chemical oxygen demand (COD). Low‐cost biological wastewater treatment methods are reported to show excellent COD removal efficiency from wastewater but have their own drawbacks. Hence, advanced integrated approaches are of new interest in this field. This review focuses on emerging technologies, in particular bioreactor configurations for petroleum wastewater treatment. It further discusses some future perspective in hybrid/integrated systems for treating PRWW. [ABSTRACT FROM AUTHOR]

Refinery wastewater treatment was performed using a novel submerged tubular ceramic membrane bioreactor (STMBR) with the oleaginous hydrocarbonoclastic bacterium Rhodococcus opacus. A membrane‐based flux study with the STMBR was carried out to assess the performance of the tubular ceramic membrane. Continuous experiments with the STMBR achieved a maximum chemical oxygen demand (COD) removal of 84 %, with an average flux of 0.4 × 10−3 m3m−2s−1. To further enhance the COD removal efficiency, two STMBR were operated under the optimum conditions. Complete COD removal along with 2.98 g L−1 biomass growth was achieved during two‐stage STMBR operation. Furthermore, a toxicity assessment of the permeate water established its reuse potential. [ABSTRACT FROM AUTHOR]