Search

The inverted metamorphic AlGaInP/AlGaAs/GaAs/InGaAs/InGaAs five‐junction solar cells with the bandgap energies of 2.0/1.67/1.42/1.18/0.83 eV were grown by metal–organic chemical vapor deposition on GaAs substrates. The mismatch stress between the two bottom (In0.17Ga0.83As and In0.46Ga0.54As) cells and GaAs substrate was nearly fully relaxed owing to the growth of AlInGaAs compositionally step‐graded buffers. By employing the low‐temperature epilayer transfer technology with only one‐time temporary bonding, the flexible five‐junction solar cells with the size of 12 cm2 were successfully fabricated. The conversion efficiency was 35.1% with the open‐circuit voltage of 4.73 V under AM1.5G spectrum. The excellent performance of the large‐size five‐junction solar cells is attributed to the low amount of mismatch dislocations in the material as well as the simple fabrication process of the flexible device. [ABSTRACT FROM AUTHOR]

Compared with the single‐junction perovskite solar cells, the perovskite/perovskite tandem solar cells have the advantages of lower cost and higher power conversion efficiency (PCE). Herein, both two‐terminal (2‐T) and four‐terminal (4‐T) perovskite/perovskite tandem solar cells with all‐inorganic perovskite as the top cell absorption layer and narrow bandgap perovskite MASn0.5Pb0.5I3 material as the bottom cell absorption layer are studied. To effectively improve the photon absorption ratio and performance of the 4‐T tandem device, both reflection and parasitic absorption should be reduced. Afterward, by optimizing the doping concentration of the carrier transport layer, a 4‐T all‐perovskite tandem solar cell with a high PCE of 30.45% is obtained. For the 2‐T all‐perovskite tandem device, the all‐inorganic perovskites with different halogen components (CsPbI3−xBrx, 0 ≤ x ≤ 3) are used as the absorption layer of the top cell, respectively. Through the optimization of the current matching of the subcell, the photoelectric field distribution, the parasitic absorption of the device, etc., an optimal PCE of 27.86% is obtained based on 2‐T CsPbI2Br/MASn0.5Pb0.5I3 tandem device. This study provides a guide for achieving high performance perovskite/perovskite tandem solar cells. [ABSTRACT FROM AUTHOR]

Covalent organic frameworks (COF) with periodic porous structures and tunable functionalities are a new class of crystalline polymers connected via strong covalent bonds. Constructing COF materials with high stability and porosity is attracting and essential for COFs' further functional exploration. In this work, two new covalent organic frameworks (TTA‐TMTA‐COF and TTA‐FMTA‐COF) with high surface area, large pore volume, and excellent chemical stability toward harsh conditions are designed and synthesized by integrating the methoxy functional groups into the networks. Both two COFs are further employed for iodine removal since radioactive iodine in nuclear waste has seriously threatened the natural environment and human health. TTA‐TMTA‐COF and TTA‐FMTA‐COF can capture 3.21 and 5.07 g g−1 iodine, respectively. Notably, the iodine capture capacity for iodine of TTA‐FMTA‐COF does not show any decline after being recycled five times. These results demonstrate both COFs possess ultrahigh capacity and excellent recyclability. [ABSTRACT FROM AUTHOR]

Abstract: In two‐stage group sequential trials with a primary and a secondary endpoint, the overall type I error rate for the primary endpoint is often controlled by an α‐level boundary, such as an O'Brien‐Fleming or Pocock boundary. Following a hierarchical testing sequence, the secondary endpoint is tested only if the primary endpoint achieves statistical significance either at an interim analysis or at the final analysis. To control the type I error rate for the secondary endpoint, this is tested using a Bonferroni procedure or any α‐level group sequential method. In comparison with marginal testing, there is an overall power loss for the test of the secondary endpoint since a claim of a positive result depends on the significance of the primary endpoint in the hierarchical testing sequence. We propose two group sequential testing procedures with improved secondary power: the improved Bonferroni procedure and the improved Pocock procedure. The proposed procedures use the correlation between the interim and final statistics for the secondary endpoint while applying graphical approaches to transfer the significance level from the primary endpoint to the secondary endpoint. The procedures control the familywise error rate (FWER) strongly by construction and this is confirmed via simulation. We also compare the proposed procedures with other commonly used group sequential procedures in terms of control of the FWER and the power of rejecting the secondary hypothesis. An example is provided to illustrate the procedures. [ABSTRACT FROM AUTHOR]

ABSTRACT Spider silk is an extraordinary material with physical properties comparable to the best scaffolding/structural materials, and as a fiber it can be manipulated with ease into a variety of configurations. Our work here demonstrates that natural spider silk fibers can also be used to organize biological components on and in devices through rapid and simple means. Micron scale spider silk fibers (5-10 μm in diameter) were surface modified with a variety of biological entities engineered with pentaglutamine tags via microbial transglutaminase (mTG). Enzymes, enzyme pathways, antibodies, and fluorescent proteins were all assembled onto spider silk fibers using this biomolecular engineering/biofabrication process. Additionally, arrangement of biofunctionalized fiber should in of itself generate a secondary level of biomolecular organization. Toward this end, as proofs of principle, spatially defined arrangement of biofunctionalized spider silk fiber was shown to generate effects specific to silk position in two cases. In one instance, arrangement perpendicular to a flow produced selective head and neck carcinoma cell capture on silk with antibodies complexed to conjugated protein G. In a second scenario, asymmetric bacterial chemotaxis arose from asymmetric conjugation of enzymes to arranged silk. Overall, the biofabrication processes used here were rapid, required no complex chemistries, were biologically benign, and also the resulting engineered silk microfibers were flexible, readily manipulated and functionally active. Deployed here in microfluidic environments, biofunctional spider silk fiber provides a means to convey complex biological functions over a range of scales, further extending its potential as a biomaterial in biotechnological settings. Biotechnol. Bioeng. 2017;114: 83-95. © 2016 Wiley Periodicals, Inc. [ABSTRACT FROM AUTHOR]

Cover Legend The cover image, by William Bentley et al., is based on the Article Conferring biological activity to native spider silk: A biofunctionalized protein‐based microfiber, DOI: 10.1002/bit.26065. [ABSTRACT FROM AUTHOR]

A luminescent conjugated microporous polymer (BCMP-3) has been synthesized in high yield by a carbon-carbon coupling reaction using triarylboron as a building unit. BCMP-3 was fully characterized by using powder X-ray diffraction analysis, Fourier transform infrared spectroscopy, 13C solid-state NMR spectroscopy, field emission scanning electron microscopy, thermogravimetric analysis, and nitrogen and carbon dioxide adsorption. The new three-dimensional conjugated framework possess a high Brunauer-Emmett-Teller (BET) specific surface area up to 950 m2 g−1 with a pore volume of 0.768 cm3 g−1, good stability, and abundant boron sites in the skeleton. Under excited-light irradiation, BCMP-3 exhibits strong fluorescent emission at 488 nm with a high absolute quantum yield of 18 % in the solid state. Polymer BCMP-3 acts as a colorimetric and fluorescent chemosensor with high sensitivity and selectivity for F− over other common anions. In addition, the polymer also works as an adsorbent for F− removal and shows good adsorption capacities of up to 24 mg g−1 at equilibrium F− concentrations of 16 mg L−1 and a temperature of 298 K. The adsorption kinetics and isotherm were analyzed by fitting experimental data with pseudo-second-order kinetics and Langmuir equations. Furthermore, we highlight that BCMP-3 is an adsorbent for fluoride removal that can be efficiently reused many times without loss of adsorption efficiency. [ABSTRACT FROM AUTHOR]

2D covalent organic frameworks (COFs) are attractive for fluorescence sensing due to their lightweight, robust, and highly ordered porous structures. However, the highly conjugated structures between adjacent layers of covalent organic frameworks can often result in aggregation‐caused quenching (ACQ) properties. Here, the study designs two flexible hydrazone‐linked COFs to suppress ACQ effects, thereby enhancing their luminescent activities. Furthermore, the high density of nitrogen and oxygen atoms on these flexible walls serves as binding sites for hydrogen bonding interactions, indicating sensitivity and selectivity towards 2,4,6‐trinitrophenol detection. [ABSTRACT FROM AUTHOR]