Search

Direct deoxygenation of long‐chain fatty acids can produce both saturated alkanes (CnH2n+2) and unsaturated olefins (CnH2n). However, the selectivity for the production of olefins via the decarbonylation route is relatively low because of the more favorable decarboxylation pathway. We present an atomically ordered intermetallic PtZn alloy on carbon catalyst (PtZn/C) with a record‐high total selectivity (97 %) for undecane (C11H24) and undecene (C11H22) in the deoxygenation of lauric acid (C12H24O2). Interestingly, the selectivity for C11H22 is as high as 67.0 % on PtZn/C, which is significantly higher than that of 27.5 % obtained on the Pt/C counterpart under the same reaction conditions. Characterization and theoretical calculation results reveal that the intermetallic PtZn alloy not only inhibits the decarboxylation route by increasing the energy barrier of −COO* cleavage, but also facilitates the decarbonylation route by decreasing CO desorption energy, and therefore the major product is switched from alkanes to olefins. [ABSTRACT FROM AUTHOR]

Background and purpose: This study was undertaken to screen the circular RNAs (circRNAs) influencing matrix metalloproteinase 9 (MMP9) through the competing endogenous RNA (ceRNA) network and evaluate the prognostic value of these circRNAs for acute ischemic stroke. Methods: A total of 220 ischemic stroke patients and 62 healthy subjects were included in this study. RNA was isolated from blood collected in PAXgene tubes. Illumina sequencing, quantitative real‐time polymerase chain reaction (qRT‐PCR) validation, and luciferase reporter assay were explored to construct and verify the existence of a circRNA–microRNA (miRNA)–matrix metalloproteinase–9 (MMP9) network. The 215 ischemic stroke patients were recruited in a prognostic cohort. They were prospectively followed up for 3 months after stroke onset, and a poor functional outcome was defined as a major disability or death. Results: After Illumina sequencing, six circRNAs were predicted to bind miRNAs and then regulate MMP9 messenger RNA (mRNA). qRT‐PCR showed that only circSKA3 was significantly increased in ischemic stroke patients compared to healthy controls and positively associated with MMP9 mRNA expression. Luciferase reporter assay further verified a direct interaction between circSKA3, MMP9, and hsa‐miR‐6796‐5p. Patients in the top tertile of circSKA3 had a 2.672‐fold (p < 0.05) risk of poor functional outcome, compared with those in the bottom tertile (p for trend = 0.016). The outcome was predicted by circSKA3 with area under the receiver operating characteristic curve at 0.614 (p = 0.004). Conclusions: circSKA3 functioned as a ceRNA for hsa‐miR‐6796‐5p to aggravate the progression of ischemic stroke via targeting MMP9. Baseline circSKA3 was positively associated with poor outcomes of ischemic stroke. circSKA3 may be a potential biomarker or therapeutic target in ischemic stroke. [ABSTRACT FROM AUTHOR]

Efficient electro‐oxidation of formic acid, methanol, and ethanol is challenging owing to the multiple chemical reaction steps required to accomplish full oxidation to CO2. Herein, a ternary CoPtAu nanoparticle catalyst system is reported in which Co and Pt form an intermetallic L10‐structure and Au segregates on the surface to alloy with Pt. The L10‐structure stabilizes Co and significantly enhances the catalysis of the PtAu surface towards electro‐oxidation of ethanol, methanol, and formic acid, with mass activities of 1.55 A/mgPt, 1.49 A/mgPt, and 11.97 A/mgPt, respectively in 0.1 m HClO4. The L10‐CoPtAu catalyst is also stable, with negligible degradation in mass activities and no obvious Co/Pt/Au composition changes after 10 000 potential cycles. The in situ surface‐enhanced infrared absorption spectroscopy study indicates that the ternary catalyst activates the C−C bond more efficiently for ethanol oxidation. [ABSTRACT FROM AUTHOR]

We report a general chemical approach to synthesize strongly ferromagnetic rare‐earth metal (REM) based SmCo and SmFeN nanoparticles (NPs) with ultra‐large coercivity. The synthesis started with the preparation of hexagonal CoO+Sm2O3 (denoted as SmCo‐O) multipods via decomposition of Sm(acac)3 and Co(acac)3 in oleylamine. These multipods were further reduced with Ca at 850 °C to form SmCo5 NPs with sizes tunable from 50 to 200 nm. The 200 nm SmCo5 NPs were dispersed in ethanol, and magnetically aligned in polyethylene glycol (PEG) matrix, yielding a PEG‐SmCo5 NP composite with the room temperature coercivity (Hc) of 49.2 kOe, the largest Hc among all ferromagnetic NPs ever reported, and saturated magnetic moment (Ms) of 88.7 emu g−1, the highest value reported for SmCo5 NPs. The method was extended to synthesize other ferromagnetic NPs of Sm2Co17, and, for the first time, of Sm2Fe17N3 NPs with Hc over 15 kOe and Ms reaching 127.9 emu g−1. These REM based NPs are important magnetic building blocks for fabrication of high‐performance permanent magnets, flexible magnets, and printable magnetic inks for energy and sensing applications. A new chemical process is developed to prepare strongly ferromagnetic SmCo5 nanoparticles (NPs) via controlled reduction of SmCo‐O multipods. The 200 nm SmCo5 NPs embedded in polyethylene glycol are aligned magnetically and show the room temperature coercivity of 49.2 kOe. The synthetic method has also been extended to prepare ferromagnetic Sm2Co17 and Sm2Fe17N3 NPs. [ABSTRACT FROM AUTHOR]

We report a facile method for assembly of a monolayer array of nitrogen-doped graphene (NG) and nanoparticles (NPs) and the subsequent transfer of two layers onto a solid substrate (S). Using 3 nm NiPd NPs as an example, we demonstrate that NiPd-NG-Si (Si=silicon wafer) can function as a catalyst and show maximum NiPd catalysis for the hydrolysis of ammonia borane (H3NBH3, AB) with a turnover frequency (TOF) of 4896.8 h−1 and an activation energy ( Ea) of 18.8 kJ mol−1. The NiPd-NG-S catalyst is also highly active for catalyzing the transfer hydrogenation from AB to nitro compounds, leading to the green synthesis of quinazolines in water. Our assembly method can be extended to other graphene and NP catalyst materials, providing a new 2D NP catalyst platform for catalyzing multiple reactions in one pot with maximum efficiency. [ABSTRACT FROM AUTHOR]

Teasing apart the effects of selection and demography on genetic polymorphism remains one of the major challenges in the analysis of population genomic data. The traditional approach has been to assume that demography would leave a genome-wide signature, whereas the effect of selection would be local. In the light of recent genomic surveys of sequence polymorphism, several authors have argued that this approach is questionable based on the evidence of the pervasive role of positive selection and that new approaches are needed. In the first part of this review, we give a few empirical and theoretical examples illustrating the difficulty in teasing apart the effects of selection and demography on genomic polymorphism patterns. In the second part, we review recent efforts to detect recent positive selection. Most available methods still rely on an a priori classification of sites in the genome but there are many promising new approaches. These new methods make use of the latest developments in statistics, explore aspects of the data that had been neglected hitherto or take advantage of the emerging population genomic data. A current and promising approach is based on first estimating demographic and genetic parameters, using, e.g., a likelihood or approximate Bayesian computation framework, focusing on extreme outlier regions, and then using an independent method to confirm these. Finally, especially for species where evidence of natural selection has been limited, more experimental and versatile approaches that contrast populations under varied environmental constraints might be more successful compared with species-wide genome scans in search of specific signatures. [ABSTRACT FROM AUTHOR]