Search

A simultaneous transfer and bonding (SITRAB) process using areal laser irradiation is introduced for high‐yield and cost‐effective production of mini‐ or micro‐light‐emitting diode (LED) display panels. SITRAB materials are special epoxy‐based solvent‐free pastes. Three types of pot life are studied to obtain a convenient SITRAB process: Room temperature pot life (RPL), stage pot life (SPL), and laser pot life (LPL). In this study, the RPL was found to be 1.2 times the starting viscosity at 25°C, and the SPL was defined as the time the solder can be wetted by the SITRAB paste at given stage temperatures of 80°C, 90°C, and 100°C. The LPL, on the other hand, was referred to as the number of areal laser irradiations for the tiling process for red, green, and blue LEDs at the given stage temperatures. The process windows of SPL and LPL were identified based on their critical time and conversion requirements for good solder wetting. The measured RPL and SPL at the stage temperature of 80°C were 6 days and 8 h, respectively, and the LPL was more than six at these stage temperatures. [ABSTRACT FROM AUTHOR]

The fourth vaccination dose confers additional protective immunity against severe acute respiratory syndrome coronavirus 2 (SARS‐CoV‐2) infection in individuals with no prior coronavirus disease‐19 (COVID‐19). However, its immunological benefit against currently circulating BA.4/5 is unclear in individuals who have received a booster shot and been infected with Omicron variant BA.1/2. We analyzed immune responses in whom had been boosted once and did not have COVID‐19 (n = 16), boosted once and had COVID‐19 when BA.1/2 was dominant in Korea (Hybrid‐6M group, n = 27), and boosted twice and did not have COVID‐19 (Vx4 group, n = 15). Antibody binding activities against RBDo BA.1 and RBDo BA.4/5, antigen‐specific memory CD4+ and CD8+ T‐cell responses against BA.4/5, and B‐cell responses against SARS‐CoV‐2 wild‐type did not differ statistically between the Hybrid‐6M and Vx4 groups. The humoral and cellular immune responses of the Hybrid‐6M group against BA.4/5 were comparable to those of the Vx4 group. Individuals who had been boosted and had an Omicron infection in early 2022 may not have high priority for an additional vaccination. [ABSTRACT FROM AUTHOR]

Background: Myosteatosis has been reported to be a novel biomarker that could predict survival outcomes in patients with colorectal cancer. However, results have been conflicting. This systematic review and meta‐analysis aimed to evaluate the long‐term impact of myosteatosis on the survival of these patients. Methods: A systematic search of PubMed, Embase, and Cochrane up to 27 November 2019 generated 7022 records. Studies that reported hazard ratio (HR) for overall survival, cancer‐specific survival, or disease‐free survival based on myosteatosis or radiodensity were included. A total of 110 full‐text articles were considered for inclusion, and 14 were selected for qualitative analysis. Inverse variance method was used with random effects model for data analysis. Results: The total number of enrolled patients included in the meta‐analysis was 6518 for univariate and 8572 for multivariate HR analysis, from 12 and 10 studies, respectively. Patients with myosteatosis had a significant increase in overall mortality compared with non‐myosteatosis patients by both univariate analysis [HR 1.38, 95% confidence interval (CI) 1.21 to 1.58, P < 0.00001] and multivariate analysis (HR 1.55, 95% CI 1.23 to 1.96, P < 0.00001). In subgroup analysis based on studies that reported HRs of both sarcopenia and myosteatosis, the negative effect of myosteatosis on overall survival was independent of sarcopenia using univariate values (sarcopenia HR 1.48, 95% CI 1.14 to 1.91, P = 0.003 vs. myosteatosis HR 1.51, 95% CI 1.17 to 1.96, P = 0.002) and multivariate values (sarcopenia HR 1.28, 95% CI 1.09 to 1.49, P = 0.002 vs. myosteatosis HR 1.38, 95% CI 1.07 to 1.80, P = 0.001). Conclusions: This meta‐analysis demonstrates that myosteatosis is associated with worse overall survival in patients with colorectal cancer. More investigation is needed to standardize the measurement protocol for myosteatosis and to further optimize its prognostic power for colorectal cancer patients. [ABSTRACT FROM AUTHOR]

Microelectromechanical systems remain an area of significant interest in fundamental and applied research due to their wide ranging applications. Most device designs, however, are largely 2D and constrained to only a few simple geometries. Achieving tunable resonant frequencies or broad operational bandwidths requires complex components and/or fabrication processes. The work presented here reports unusual classes of 3D micromechanical systems in the form of vibratory platforms assembled by controlled compressive buckling. Such 3D structures can be fabricated across a broad range of length scales and from various materials, including soft polymers, monocrystalline silicon, and their composites, resulting in a wide scope of achievable resonant frequencies and mechanical behaviors. Platforms designed with multistable mechanical responses and vibrationally decoupled constituent elements offer improved bandwidth and frequency tunability. Furthermore, the resonant frequencies can be controlled through deformations of an underlying elastomeric substrate. Systematic experimental and computational studies include structures with diverse geometries, ranging from tables, cages, rings, ring-crosses, ring-disks, two-floor ribbons, flowers, umbrellas, triple-cantilever platforms, and asymmetric circular helices, to multilayer constructions. These ideas form the foundations for engineering designs that complement those supported by conventional, micro-electromechanical systems, with capabilities that could be useful in systems for biosensing, energy harvesting, and others. [ABSTRACT FROM AUTHOR]

Cystic fibrosis (CF) patients suffer from chronic airway inflammation with excessive neutrophil infiltration. Migration of neutrophils to the lung requires chemokine and cytokine signaling as well as cell adhesion molecules, such as intercellular adhesion molecule-1 (ICAM-1), which plays an important role in mediating adhesive interactions between effector and target cells in the immune system. In this study, we investigated the relationship between ICAM-1 and epithelium-specific ETS-like transcription factor 1 (ESE-1) and found that ICAM-1 expression is upregulated in cell lines of CF (IB3-1) as well as non-CF (BEAS-2B and A549) epithelial origin in response to inflammatory cytokine stimulation. Since ESE-1 is highly expressed in A549 cells without stimulation, we examined the effect of ESE-1 knockdown on ICAM-1 expression in these cells. We found that ICAM-1 expression was downregulated when ESE-1 was knocked down in A549 cells. We also tested the effect of ESE-1 knockdown on cell-cell interactions and demonstrate that the knocking down ESE-1 in A549 cells reduce their interactions with HL-60 cells (human promyelocytic leukemia cell line). These results suggest that ESE-1 may play a role in regulating airway inflammation by regulating ICAM-1 expression. [ABSTRACT FROM AUTHOR]