Search

Purpose: Whole‐brain radiotherapy (WBRT) is commonly used in patients with multiple brain metastases. Compared with conventional WBRT, hippocampal avoidance WBRT (HA‐WBRT) more favorably preserves cognitive function and the quality of life. The hippocampal volume is considerably small (approximately 3.3 cm3). Therefore, downsizing the leaf width of a multileaf collimator (MLC) may provide higher spatial resolution and better plan quality. Volumetric modulated arc therapy (VMAT) could simulate the half MLC leaf width through couch shifting between arcs. This study investigated changes in VMAT quality for HA‐WBRT with a simulated fine MLC leaf width. Methods: We included 18 patients with brain metastasis. All target and avoidance structures were contoured by an experienced radiation oncologist. The prescribed dose was 30 Gy in 10 fractions. For each patient, three different treatment plans were generated for comparison: VMAT with couch‐shift, VMAT without couch‐shift, and TomoTherapy. All treatment plans fulfilled Radiation Therapy Oncology Group (RTOG) 0933 criteria for HA‐WBRT. The Wilcoxon paired signed‐rank test was used to compare different treatment plans. Results: VMAT with couch‐shift had the better average conformity index (0.823) with statistically significant difference compared to VMAT without couch‐shift (0.810). VMAT with couch‐shift (0.219) had a more favorable average homogeneity index (HI) than did VMAT without couch‐shift (0.230), although the difference was not significant. TomoTherapy had an optimal average HI of 0.070. In terms of the hippocampus, all three treatment plans met the RTOG 0933 criteria. VMAT with couch‐shift had a lower average Dmax (15.2 Gy) than did VMAT without couch‐shift (15.3 Gy, p = 0.071) and TomoTherapy (15.5 Gy, p = 0.133). The average D100% of hippocampus was the same for both VMAT with and without couch‐shift (8.5 Gy); however, TomoTherapy had a lower average D100% value of 7.9 Gy. The treatment delivery time was similar between VMAT with and without couch‐shift (average, 375.0 and 369.6 s, respectively). TomoTherapy required a long average delivery time of 1489.9 s. Conclusion: The plan quality of VMAT for HA‐WBRT was improved by using the couch‐shift technique to simulate the half MLC leaf width. However, the improvement was not statistically significant except conformity index. The downsizing effect decreased with the use of the sophisticated grade of VMAT. TomoTherapy offered superior plan quality but required the longest delivery time. [ABSTRACT FROM AUTHOR]

The rice leaf folder, Cnaphalocrocis medinalis Guenée (Lepidoptera: Crambidae), an important foliage feeding insect in rice, Oryza sativa L. (Poaceae), is widely distributed throughout Asia, causing frequent outbreaks and considerable yield losses. Mutants of the rice strain Samba Mahsuri (MSM) represent unique plant material and are explored here for the first time for resistance to the rice leaf folder. Stringent rapid field screening for two consecutive seasons led to the identification of 10 lines as moderately resistant, with low damage area as well as low damage score. Upon assessment of various morphological traits potentially contributing to the resistance, damage area was negatively correlated with leaf length and positively with leaf width. Among the biochemical traits, leaf nitrogen content was positively correlated with leaf folder damage whereas silica was negatively correlated. Oviposition preference by leaf folder adult moths and larval settling preference were low on MSM 139 and MSM 127. We also observed that leaf folder larvae took more time for leaf selection (3.1 min) and making a primary fold (41.5 min), with more head swings (846) in moderately resistant MSM lines. Similarly, in these lines, leaf folders showed a low intrinsic rate of increase (rm = 0.15 females per female per day), low weekly multiplication rate (2.85), and low net reproductive rate (R0 = 137.5 females per female per generation) with increased generation time (T = 32.8 days) and doubling time (4.5 days), indicating their relatively poor population growth potential. Overall, the moderately resistant mutant lines we identified showed reduced ovipositional preference and larval settling preference, extended larval developmental period with low survival, reduced primary fold length, and an increased number of binds and head swings with a low intrinsic rate of increase resulting in reduced population build‐up. These lines possessing a good genetic makeup have a great potential to be used in breeding programs for the development of leaf folder resistant varieties. [ABSTRACT FROM AUTHOR]

Summary: Leaf width (LW) is an important component of plant architecture that extensively affects both light capture during photosynthesis and grain yield, particularly under dense planting conditions. However, the genetic and molecular mechanisms regulating LW remain largely elusive in maize (Zea mays L.). In this study, qLW4a, a major quantitative trait locus controlling LW, was identified in a population constructed with maize inbred lines PH6WC, with wide leaves, and Lin387, with narrow leaves. Map‐based cloning revealed that ZmNL4, a kelch‐repeat superfamily gene, emerged to be the candidate for qLW4a, and a single‐base deletion in the conserved SMC_prok_B domain of ZmNL4 in Lin387 caused a frame shift, leading to premature termination. Consistently, the knockout of ZmNL4 by CRISPR/Cas9 editing significantly reduced the LW, which was attributed to a reduction in the cell number instead of cell size, indicating a role of ZmNL4 in regulating cell division. Transcriptomic comparison of ZmNL4 knockout lines with the wild type B73‐329 revealed that ZmNL4 might participate in cell wall biogenesis, asymmetric cell division, metabolic processes, transmembrane transport and response to external stimulus, etc. These results provide insights into the genetic and molecular mechanisms of ZmNL4 in controlling LW and could potentially contribute to optimizing plant architecture for maize breeding. [ABSTRACT FROM AUTHOR]

Premise: The nondestructive measurement of leaf area is important for expediting data acquisition in the field. The Montgomery equation (ME) assumes that leaf area (A) is a proportional function of the product of leaf length (L) and width (W), i.e., A = cLW, where c is called the Montgomery parameter. The ME has been successfully applied to calculate the surface area of many broad‐leaved species with simple leaf shapes. However, whether this equation is valid for more complex leaf shapes has not been verified. Methods: Leaf A, L, and W were measured directly for each of 5601 leaves of 15 vine species, and ME and three other models were used to fit the data. All four models were compared based on their root mean square errors (RMSEs) to determine whether ME provided the best fit. Results: The ME was a reliable method for estimating the A of all 15 species. In addition, the numerical values of 13 of the 15 values of c fell within a previously predicted numerical range (i.e., between 1/2 and π/4). The data show that the numerical values of c are largely affected by the value of W/L, the concavity of the leaf base, and the number of lobes on the lamina. Conclusions: The Montgomery parameter can reflect the influence of leaf shape on leaf‐area calculations and can serve as an important tool for nondestructive measurements of leaf area for many broad‐leaved species and for the investigation of leaf morphology. [ABSTRACT FROM AUTHOR]

Leaf area are very important parameter for the understanding of growth and physiological responses of invasive plant species under different environmental factors. This study was conducted to build non‐destructive leaf area model of Wedelia trilobata that were grown in greenhouse. Regression analysis and artificial neural network (ANN) approaches were used for the development of leaf area model with the help of leaf length and width of 262 plants samples. In selection of best method under both techniques, the lower value of mean absolute error (MAE), root mean square error (RMSE), mean absolute percentage error (MAPE) and higher value of R2 were considered. According to the results it was found that ANN have higher value of (R2 = 0.96) and lower value of error (MAE = 0.023, RMSE = 0.379, MAPE = 0.001) than regression analysis (R2 = 0.94, MAE = 0.111, RMSE = 1.798, MAPE = 0.0005). It was concluded that error between predicted and actual value was less under ANN. Therefore, ANN model approach can be used as an alternating method for the estimation of leaf area. Through estimation of leaf area, invasive plant growth can predict under different environment conditions. [ABSTRACT FROM AUTHOR]

Purpose: To quantify the contribution of penumbra in the improvement of healthy tissue sparing at reduced source‐to‐axis distance (SAD) for simple spherical target and different prescription isodoses (PI). Method: A TPS‐independent method was used to estimate three‐dimensional (3D) dose distribution for stereotactic treatment of spherical targets of 0.5 cm radius based on single beam two‐dimensional (2D) film dosimetry measurements. 1 cm target constitutes the worst case for the conformation with standard Multi‐Leaf Collimator (MLC) with 0.5 cm leaf width. The measured 2D transverse dose cross‐sections and the profiles in leaf and jaw directions were used to calculate radial dose distribution from isotropic beam arrangement, for both quadratic and circular beam openings, respectively. The results were compared for standard (100 cm) and reduced SAD 70 and 55 cm for different PI. Results: For practical reduction of SAD using quadratic openings, the improvement of healthy tissue sparing (HTS) at distances up to 3 times the PTV radius was at least 6%–12%; gradient indices (GI) were reduced by 3–39% for PI between 40% and 90%. Except for PI of 80% and 90%, quadratic apertures at SAD 70 cm improved the HTS by up to 20% compared to circular openings at 100 cm or were at least equivalent; GI were 3%–33% lower for reduced SAD in the PI range 40%–70%. For PI = 80% and 90% the results depend on the circular collimator model. Conclusion: Stereotactic treatments of spherical targets delivered at reduced SAD of 70 or 55 cm using MLC spare healthy tissue around the target at least as good as treatments at SAD 100 cm using circular collimators. The steeper beam penumbra at reduced SAD seems to be as important as perfect target conformity. The authors argue therefore that the beam penumbra width should be addressed in the stereotactic studies. [ABSTRACT FROM AUTHOR]

• Explanations of leaf size variation commonly focus on water availability, yet leaf size also varies with latitude and elevation in environments where water is not strongly limiting. We provide the first conclusive test of a prediction of leaf energy balance theory that may explain this pattern: large leaves are more vulnerable to night-time chilling, because their thick boundary layers impede convective exchange with the surrounding air. • Seedlings of 15 New Zealand evergreens spanning 12-fold variation in leaf width were exposed to clear night skies, and leaf temperatures were measured with thermocouples. We then used a global dataset to assess several climate variables as predictors of leaf size in forest assemblages. • Leaf minus air temperature was strongly correlated with leaf width, ranging from -0.9 to -3.2°C in the smallest- and largest-leaved species, respectively. Mean annual temperature and frost-free period were good predictors of evergreen angiosperm leaf size in forest assemblages, but no climate variable predicted deciduous leaf size. • Although winter deciduousness makes large leaves possible in strongly seasonal climates, large-leaved evergreens are largely confined to frost-free climates because of their susceptibility to radiative cooling. Evergreen leaf size data can therefore be used to enhance vegetation models, and to infer palaeotemperatures from fossil leaf assemblages. [ABSTRACT FROM AUTHOR]

Abstract: Given anticipated climate changes, it is crucial to understand controls on leaf temperatures including variation between species in diverse ecosystems. In the first study of leaf energy balance in tropical montane forests, we observed current leaf temperature patterns on 3 tree species in the Atlantic forest, Brazil, over a 10‐day period and assessed whether and why patterns may vary among species. We found large leaf‐to‐air temperature differences (maximum 18.3 °C) and high leaf temperatures (over 35 °C) despite much lower air temperatures (maximum 22 °C). Leaf‐to‐air temperature differences were influenced strongly by radiation, whereas leaf temperatures were also influenced by air temperature. Leaf energy balance modelling informed by our measurements showed that observed differences in leaf temperature between 2 species were due to variation in leaf width and stomatal conductance. The results suggest a trade‐off between water use and leaf thermoregulation; Miconia cabussu has more conservative water use compared with Alchornea triplinervia due to lower transpiration under high vapour pressure deficit, with the consequence of higher leaf temperatures under thermal stress conditions. We highlight the importance of leaf functional traits for leaf thermoregulation and also note that the high radiation levels that occur in montane forests may exacerbate the threat from increasing air temperatures. [ABSTRACT FROM AUTHOR]

Abstract: Leaf‐related traits (leaf length, leaf width, leaf area and leaf angle) are very important for the yield of maize (Zea mays L) due to their influence on plant type. Therefore, it is necessary to identify quantitative trait loci (QTLs) for leaf‐related traits. In this report, 221 doubled haploid lines (DHLs) of an IBM Syn10 DH population were provided for QTL mapping. In total, 54 QTLs were detected for leaf‐related traits in single environments using a high‐density genetic linkage map. Among them, only eight common QTLs were identified across two or three environments, and the common QTLs for the four traits explained 4.38%–19.99% of the phenotypic variation. qLL‐2‐1 (bin 2.09), qLW‐2‐2 (bin 2.09), qLW‐6‐3 (bin 6.07) and qLA‐5‐2 (bin 2.09) were detected in previous studies, and qLL‐1‐1, qLAr‐1‐1, qLAr‐2‐1 and qLA‐7‐1 may be new QTLs. Notably, qLW‐6‐3 and qLA‐5‐2 were found to be major QTLs explaining 19.99% and 10.96% of the phenotypic variation, respectively. Interestingly, we found three pairs of QTLs (qLW‐2‐2 and qLAr‐2‐1, qLW‐8‐1 and qLL‐8‐2, qLL‐3‐3 and qLAr‐3‐3) that control different traits and that were located on the same chromosome or in a nearby location. Moreover, nine pairs of loci with epistatic effects were identified for the four traits. These results may provide the foundation for QTL fine mapping and for an understanding of the genetic basis of variation in leaf‐related traits. [ABSTRACT FROM AUTHOR]

Summary: Molecular genetic analyses revealed that the WUSCHEL‐related homeobox (WOX) gene superfamily regulates several programs in plant development. Many different mechanisms are reported to underlie these alterations. The WOX family member STENOFOLIA (STF) is involved in leaf expansion in the eudicot Medicago truncutula. Here, we report that when this gene was ectopically expressed in a locally adapted hard red winter wheat cultivar (Triticum aestivum), the transgenic plants showed not only widened leaves but also accelerated flowering and increased chlorophyll content. These desirable traits were stably inherited in the progeny plants. STF binds to wheat genes that have the (GA)n/(CT)n DNA cis element, regardless of sequences flanking the DNA repeats, suggesting a mechanism for its pleiotropic effects. However, the amino acids between position 91 and 262 in the STF protein that were found to bind with the (GA)n motif have no conserved domain with any other GAGA‐binding proteins in animals or plants. We also found that STF interacted with a variety of proteins in wheat in yeast 2 hybrid assays. We conclude that the eudicot STF gene binds to (GA)n/(CT)n DNA elements and can be used to regulate leaf width, flowering time and chlorophyll content in monocot wheat. [ABSTRACT FROM AUTHOR]

Leaf expansion depends on both carbon and water availabilities. In cereals, most of experimental effort has focused on leaf elongation, with essentially hydraulic effects. We have tested if evaporative demand and light could have distinct effects on leaf elongation and widening, and if short-term effects could translate into final leaf dimensions. For that, we have monitored leaf widening and elongation in a field experiment with temporary shading, and in a platform experiment with 15 min temporal resolution and contrasting evaporative demands. Leaf widening showed a strong (positive) sensitivity to whole-plant intercepted light and no response to evaporative demand. Leaf elongation was (negatively) sensitive to evaporative demand, without effect of intercepted light per se. We have successfully tested resulting equations to predict leaf length and width in an external dataset of 15 field and six platform experiments. These effects also applied to a panel of 251 maize hybrids. Leaf length and width presented quantitative trait loci (QTLs) whose allelic effects largely differed between both dimensions but were consistent in the field and the platform, with high QTL × Environment interaction. It is therefore worthwhile to identify the genetic and environmental controls of leaf width and leaf length for prediction of plant leaf area. [ABSTRACT FROM AUTHOR]

Exploring genes with impact on yield-related phenotypes is the preceding step to accomplishing crop improvements while facing a growing world population. A genome-wide association scan on leaf blade area ( LA) in a worldwide spring barley collection ( Hordeum vulgare L.), including 125 two- and 93 six-rowed accessions, identified a gene encoding the homeobox transcription factor, Six-rowed spike 1 ( VRS1). VRS1 was previously described as a key domestication gene affecting spike development. Its mutation converts two-rowed (wild-type VRS1, only central fertile spikelets) into six-rowed spikes (mutant vrs1, fully developed fertile central and lateral spikelets). Phenotypic analyses of mutant and wild-type leaves revealed that mutants had an increased leaf width with more longitudinal veins. The observed significant increase of LA and leaf nitrogen (%) during pre-anthesis development in vrs1 mutants also implies a link between wider leaf and grain number, which was validated from the association of vrs1 locus with wider leaf and grain number. Histological and gene expression analyses indicated that VRS1 might influence the size of leaf primordia by affecting cell proliferation of leaf primordial cells. This finding was supported by the transcriptome analysis of mutant and wild-type leaf primordia where in the mutant transcriptional activation of genes related to cell proliferation was detectable. Here we show that VRS1 has an independent role on barley leaf development which might influence the grain number. [ABSTRACT FROM AUTHOR]

Purpose: The authors evaluated the effects of multileaf collimator (MLC) leaf width (2.5 vs. 5 mm) on dosimetric parameters and delivery efficiencies of intensity-modulated radiation therapy (IMRT) and volumetric-modulated arc therapy (VMAT) for head and neck (H&N) cancers. Methods: The authors employed two types of mock phantoms: large-sized head and neck (LH&N) and small-sized C-shape (C-shape) phantoms. Step-and-shoot IMRT (S&S_IMRT) and VMAT treatment plans were designed with 2.5- and 5.0-mm MLC for both C-shape and LH&N phantoms. Their dosimetric characteristics were compared in terms of the conformity index (CI) and homogeneity index (HI) for the planning target volume (PTV), the dose to organs at risk (OARs), and the dose-spillage volume. To analyze the effects of the field and arc numbers, 9-field IMRT (9F-IMRT) and 13-field IMRT (13F-IMRT) plans were established for S&S_IMRT. For VMAT, single arc (VMAT1) and double arc (VMAT2) plans were established. For all plans, dosimetric verification was performed using the phantom to examine the relationship between dosimetric errors and the two leaf widths. Delivery efficiency of the two MLCs was compared in terms of beam delivery times, monitor units (MUs) per fraction, and the number of segments for each plan. Results: 2.5-mm MLC showed better dosimetric characteristics in S&S_IMRT and VMAT for C-shape, providing better CI for PTV and lower spinal cord dose and high and intermediate dose-spillage volume as compared with the 5-mm MLC ( p < 0.05). However, no significant dosimetric benefits were provided by the 2.5-mm MLC for LH&N ( p > 0.05). Further, beam delivery efficiency was not observed to be significantly associated with leaf width for either C-shape or LH&N. However, MUs per fraction were significantly reduced for the 2.5-mm MLC for the LH&N. In dosimetric error analysis, absolute dose evaluations had errors of less than 3%, while the Gamma passing rate was greater than 95% according to the 3%/3 mm criteria. There were no significant differences in dosimetric error between the 2.5- and 5-mm MLCs. Conclusions: As compared with MLC of 5-mm leaf widths, MLC with finer leaf width (2.5-mm) can provide better dosimetric outcomes in IMRT for C-shape. However, the MLC leaf width may only have minor effects on dosimetric characteristics in IMRT for LH&N. The results of the present study will serve as a useful assessment standard when assigning or introducing equipment for the treatment of H&N cancers. [ABSTRACT FROM AUTHOR]

Purpose: The aim of the study was to evaluate the impact of multileaf collimator (MLC) leaf width on treatment adaptation and delivery accuracy for concurrent treatment of the prostate and pelvic lymph nodes with intensity modulated radiation therapy (IMRT). Methods: Seventy-five kilovoltage cone beam CTs (KV-CBCT) from six patients were included for this retrospective study. For each patient, three different IMRT plans were created based on a planning CT using three different MLC leaf widths of 2.5, 5, and 10 mm, respectively. For each CBCT, the prostate displacement was determined by a dual image registration. Adaptive plans were created by shifting selected MLC leaf pairs to compensate for daily prostate movements. To evaluate the impact of MLC leaf width on the adaptive plan for each daily CBCT, three MLC shifted plans were created using three different leaf widths of MLCs (a total of 225 adaptive treatment plans). Selective dosimetric endpoints for the tumor volumes and organs at risk (OARs) were evaluated for these adaptive plans. Using the planning CT from a selected patient, MLC shifted plans for three hypothetical longitudinal shifts of 2, 4, and 8 mm were delivered on the three linear accelerators to test the deliverability of the shifted plans and to compare the dose accuracy of the shifted plans with the original IMRT plans. Results: Adaptive plans from 2.5 and 5 mm MLCs had inadequate dose coverage to the prostate (D99 < 97%, or Dmean < 99% of the planned dose) in 6%-8% of the fractions, while adaptive plans from 10 mm MLC led to inadequate dose coverage to the prostate in 25.3% of the fractions. The average V56Gy of the prostate over the six patients was improved by 6.4% (1.6%-32.7%) and 5.8% (1.5%-35.7%) with adaptive plans from 2.5 and 5 mm MLCs, respectively, when compared with adaptive plans from 10 mm MLC. Pelvic lymph nodes were well covered for all MLC adaptive plans, as small differences were observed for D99, Dmean, and V50.4Gy. Similar OAR sparing could be achieved for the bladder and rectum with all three MLCs for treatment adaptation. The MLC shifted plans can be accurately delivered on all three linear accelerators with accuracy similar to their original IMRT plans, where gamma (3%/3 mm) passing rates were 99.6%, 93.0%, and 92.1% for 2.5, 5, and 10 mm MLCs, respectively. The percentages of pixels with dose differences between the measurement and calculation being less than 3% of the maximum dose were 85.9%, 82.5%, and 70.5% for the original IMRT plans from the three MLCs, respectively. Conclusions: Dosimetric advantages associated with smaller MLC leaves were observed in terms of the coverage to the prostate, when the treatment was adapted to account for daily prostate movement for concurrent irradiation of the prostate and pelvic lymph nodes. The benefit of switching the MLC from 10 to 5 mm was significant (p < 0.01); however, switching the MLC from 5 to 2.5 mm would not gain significant (p = 0.15) improvement. IMRT plans with smaller MLC leaf widths achieved more accurate dose delivery. [ABSTRACT FROM AUTHOR]

1. Small leaves of species endemic to Mediterranean-type climate areas have been associated with both low rainfall and nutrient availability, but the physiological reasons for this association remain unknown. 2. We postulated that small leaves have thin boundary layers that facilitate transpiration in winter and sensible heat loss in summer. High transpiration rates when water is available may facilitate nutrient acquisition in winter, whereas efficient sensible heat loss reduces the requirement for transpirational leaf cooling in summer. 3. The consequences of varying leaf sizes for water and heat loss in Cape Proteaceae were examined at two scales. At the leaf level, gas exchange and thermoregulatory capacities of 15 Proteaceae species with varying leaf size were assessed under controlled conditions using phylogenetically independent contrasts. At an environmental level, leaf attributes of Proteaceae occurring in the winter-rainfall area of the Cape Floristic Region were correlated with climatic environments derived from distribution data for each species. 4. Leaf temperature was positively correlated with leaf size when wind speed was negligible. However, transpiration decreased significantly with increasing leaf size when measured on individual leaves, detached branches and when expressed on a per stoma basis. 5. From multiple stepwise regression analysis of climatic variables obtained from distribution data, leaf size was negatively correlated with A-Pan evaporation, mean annual temperatures and water stress in January. We conclude that leaf size is conservative for survival over relatively rare periods of hot dry conditions with low wind speeds. 6. Narrow leaves enable plants to shed heat through sensible heat loss during summer droughts, without the need for transpirational cooling. Additionally, small leaf dimensions confer a capacity for high transpiration when evaporative demand is low and water is abundant (i.e. winter). This may be a particularly important strategy for driving nutrient mass-flow to the roots of plants that take up most of their nutrients in the wet winter/spring months from nutrient-poor soils. [ABSTRACT FROM AUTHOR]

The development of the flat morphology of leaf blades is dependent on the control of cell proliferation as well as cell expansion. Each process has a polarity with respect to the longitudinal and transverse axes of the leaf blade. However, only a few regulatory components of these processes have been identified to date. We have characterized two genes from Arabidopsis thaliana: ANGUSTIFOLIA3 ( AN3), which encodes a homolog of the human transcription coactivator SYT, and GROWTH-REGULATING FACTOR5 ( AtGRF5), which encodes a putative transcription factor. AN3 is identical to GRF-INTERACTING FACTOR1 ( AtGIF1). The an3 and atgrf5 mutants exhibit narrow-leaf phenotypes due to decreases in cell number. Conversely, cell proliferation in leaf primordia is enhanced and leaves grow larger than normal when AN3 or AtGRF5 is overexpressed. Both genes are expressed in leaf primordia, and in the yeast two-hybrid assay, the gene products were found to interact with each other through their N-terminal domains. These results suggest that AN3 and AtGRF5 act together and are required for the development of appropriate leaf size and shape through the promotion and/or maintenance of cell proliferation activity in leaf primordia. [ABSTRACT FROM AUTHOR]

The light-induced unrolling of primary leaves of dark-grown wheat (Triticum aestivum L. cv. Weibull's Folke) and barley (Hordeum vulgare L. cv. Weibull's Ida) does not follow the reciprocity law but shows maxima and minima like the phototropic dose-response curve. These fluctuations of the unrolling can be explained by differences and non-synchronizations of the growth in width of the two sides of the leaves. As the thickness of the leaves is small, even minute differences between the widths of the two sides will give rise to great changes in the unrolling and thus in the projection values. [ABSTRACT FROM AUTHOR]

This study characterizes barley (Hordeum vulgare L.) germplasm that evolved under continuous cultivation in highly drought-prone areas of the near East. Landrace populations originating from 70 locations in Syria and Jordan were evaluated under field conditions in Tel Hadia, Syria, on the basis of single head-row progeny performance. Significant genetic variation was found for all traits recorded; seed colour, kernel row number, growth habit, awn barbing, days to heading, culm length, leaf widths, awn length, early growth vigour, lodging score, and mildew resistance. For most traits, large proportions of the total variation were found between head progenies within single populations. The qualitative traits, growth habit, seed colour, and awn barbing showed higher variation indices in populations originating from the drier regions of Syria. Populations from the drier regions headed slightly earlier, had narrower leaves, longer culms and tended to be more susceptible to lodging and mildew than populations originating in the higher rainfall area in Syria. For all traits, the variance components resulting from differences among populations within a particular growing region, as well as those among populations from different regions, were highly significant. This indicates that this gemplasm stock contains materials with adaptability to these diverse growing conditions. The variability present within populations, as well as that among populations with similar adaptability, is sufficient to allow successful selection for productivity-related traits. [ABSTRACT FROM AUTHOR]