Search

The effects of composition on the phase formation of multicomponent garnet crystals grown via directional solidification by the micro-pulling-down method are studied. A relatively wide range of rare-earth (RE) average ionic radii (AIR) is explored by formulating ten compositions from the system (Lu,Y,Ho,Dy,Tb,Gd)3Al5O12. Crystals were grown at either 0.05 or 0.20 mm min-1. The hypothesis is that multicomponent compounds with large AIR will form secondary phases as the single-RE aluminum garnets formed by larger Tb3+ or Gd3+; this will result in crystals of poor optical quality. Crystals with large AIR have a central opaque region in optical microscopy images, which is responsible for their reduced transparency compared to crystals with small AIR. Slow pulling rates suppress the formation of the opaque region in crystals with intermediate AIR. Powder and single-crystal X-ray diffraction and electron probe microanalysis results indicate that the opaque region is a perovskite phase. Scanning electron microscopy and energy dispersive spectroscopy measurements reveal eutectic inclusions at the outer surface of the crystals. The concentration of the eutectic inclusions increases with increasing AIR. [ABSTRACT FROM AUTHOR]

Phase formation in multicomponent rare‐earth oxides is determined by a combination of composition, sintering atmosphere, and cooling rate. Polycrystalline ceramics comprising various combinations of Ce, Gd, La, Nd, Pr, Sm, and Y oxides in equiatomic proportions were synthesized using solid‐state sintering. The effects of composition, sintering atmosphere, and cooling rate on phase formation were investigated. Single cubic or monoclinic structures were obtained with a slow cooling of 3.3°C/min, confirming that rare‐earth oxides follow a different structure stabilization process than transition metal high‐entropy oxides. In an oxidizing atmosphere, both Ce and Pr induce a cubic structure, while only Ce plays that role in an inert or reducing atmosphere. Samples without Ce or Pr develop a single monoclinic structure. The structures formed at initial synthesis may be converted to a different one, when the ceramics are annealed in an additional atmosphere. Phase evolution of a five‐cation composition was also studied as a function of sintering temperature. The binary oxides used as raw materials completely dissolve into a single cubic structure at 1450°C in air. [ABSTRACT FROM AUTHOR]

In this study, we demonstrated a drastic improvement in energy resolution of (Lu0.75Y0.25)3Al5O12:Pr (LuYAG) single crystal scintillators from 4.8% to 4.1% at 662 keV upon Li+ codoping, which is the best value ever reported in the class of oxide single crystal scintillators. Li+ codoping can also significantly enhance its scintillation yield from 16 000 to 25 000 photons MeV−1, but slightly prolong the scintillation decay time. As Li+ codoping was found to have a negligible effect on the light yield non‐proportionality, we attributed the significant improvement in energy resolution to the reduced statistical variance in the number of photoelectrons produced in the photomultiplier tube (Rstat). [ABSTRACT FROM AUTHOR]

Time‐resolved spectroscopic study of the photoluminescence response to femtosecond pulse excitation and free carrier absorption at different wavelengths, thermally stimulated luminescence measurements and investigation of differential absorption are applied to amend the available data on excitation transfer in GAGG:Ce scintillators, and an electronic energy‐level diagram in this single crystal is suggested to explain the influence of codoping with divalent Mg on luminescence kinetics and light yield. The conclusions are generalized by comparison of the influence of aliovalent doping in garnets (GAGG:Ce) and oxyorthosilicates (LSO:Ce and YSO:Ce). In both cases, the codoping facilitates the energy transfer to radiative Ce3+ centers, while the light yield is increased in the LYSO:Ce system but reduced in GAGG:Ce. [ABSTRACT FROM AUTHOR]

Codoping is an effective approach for precise control of point defects in many advanced materials, and can be used to optimize their function. This paper reports an effort toward tailoring the scintillation properties of metal halides through defect engineering. A study of aliovalent codoping of the KCaI3:Eu2+ single‐crystalline scintillators is performed, through which it is discovered that a simultaneous suppression of X‐ray induced afterglow and improvement of gamma‐ray energy resolution can be successfully achieved via Zr4+ codoping. The afterglow level is reduced by more than twofold with Zr4+ codoping. The energy resolution of a 5 mm cubic KCaI3:Eu2+ sample is improved from 3.25 to 2.7% at 662 keV, and 6.5 to 5.73% at 122 keV upon Zr4+ codoping. Physical explanations for the improvements are revealed from our investigations into both the electronic structure and thermodynamics of the defects by using thermoluminescence techniques and density functional theory calculations. The codoped Zr4+ ions prefer to form interstitials acting as shallow electron traps. The {ZrCa+VCa} complex can co‐exist with Zri interstitials as shallow hole traps under certain condition, which are able to trap holes temporarily. [ABSTRACT FROM AUTHOR]

GGAG:Ce crystals with various Ca concentrations were grown by the Czochralski technique. The introduction of Ca2+ ions into a trivalent site results in a change in the Ce valence state as well as an additional F+ luminescence center. The changes of Ce valence state could be affected by various annealing atmospheres and were investigated via measuring the Ce3+ absorbance and observing the color change of the sample. Photoluminescence spectra and photoluminescence decay were used to reveal the occurrence of F+ center related to the oxygen vacancies during the annealing. A redox mechanism and a charge compensation process are proposed to explain the change in Ce state charge and F+ center during the annealing. [ABSTRACT FROM AUTHOR]

Commercially available Lu2SiO5:Ce (LSO:Ce) scintillators for the nuclear medical imaging applications, such as positron electron tomography (PET), normally have a light yield of 30 000–32 000 photons/MeV and a scintillation decay time of 43–45 ns. We demonstrate a simultaneous improvement of light yield and decay time of LSO:Ce single crystal scintillators with lithium codoping. Li codoping significantly enhances the light yield of LSO:Ce from 32 500 to 39 000 photons/MeV, shortens the scintillation decay time from 45.4 to 42.1 ns, and reduces the room temperature afterglow by around one order of magnitude. The physical insights on the role of Li codopants in scintillation mechanism are provided by studying cerium oxidation state, luminescence properties of cerium activator centers, defect structure, and preferential occupation of lithium ions. The improved light yield and afterglow are explained in terms of the dissociation of spatially correlated oxygen vacancies (VO) and Ce centers or the suppression of VO formation, allowing a more efficient electron migration to Ce centers. We attribute the decay time shortening upon Li+ codoping to the reduction of slow Ce2 emissions via a non‐radiative energy transfer from six‐coordinated Ce2 to seven‐coordinated Ce1 centers. This letter reports a simultaneous improvement of light yield, decay time, and afterglow of Lu2SiO5:Ce3+ scintillation detectors by Li+ codoping. Analysis reveals the non‐conversion of stable Ce3+ to Ce4+ upon Li codoping, and the critical role of Li site occupancy on the suppression of oxygen vacancies. This strategy is also expected to be extended to other oxide scintillators. [ABSTRACT FROM AUTHOR]