Search

With the advantages of short charging and discharging times, high power density, and long cycle life, supercapacitors are regarded as one of the most promising energy storage devices and have garnered massive attention in the field of energy storage. This paper prepared La1−xCaxMnO3 (x=0, 0.05, 0.1, 0.15, and 0.2) nanoparticles by the sol‐gel method. The microstructure, morphology, and electrochemical performance of the samples were characterized. The results depict that La0.85Ca0.15MnO3 has a low charge transfer resistance (0.19 Ω) and a large specific surface area (38.79 m2 g−1). The maximum specific capacitance of the La0.85Ca0.15MnO3 sample reached 248 F/g at a current density of 0.5 A/g, which is ascribable to its large specific surface area and high oxygen vacancy concentration. The anion‐intercalation mechanism was investigated by the charging and discharging process. The above results depict that Ca‐doping significantly enhances the electrochemical performance of LaMnO3 system. [ABSTRACT FROM AUTHOR]

This paper aims to evaluate the potential of totally bioresorbable composites as cardiovascular stent material. Copolymers were synthesized by ring-opening polymerization of L-lactide (LLA) and 1,3-trimethylene carbonate (TMC) with LLA-TMC ratios of 3/1, 4/1, and 5/1 and characterized by nuclear magnetic resonance (NMR), gel permeation chromatography (GPC), and differential scanning calorimetry (DSC). Wt. 5% of poly( L-lactide)- co-(glycolide) (PLGA) fibers are used to reinforce PTMC-LLA copolymer matrices to prepare totally bioresorbable composites. Heat treatment under vacuum and oxygen plasma treatment are applied to improve the mechanical performance of the composites in terms of eliminating the imperfections inside, enhancing interfacial affinity, surface roughness, and enriching surface oxidative chemical bonds. After plasma treatment, the viscosity and tensile strength of the fibers decrease, but the surface chemical bonds are enriched and surface roughness is increased. The composites with 15-min plasma-treated fibers and 2 h heat treatment exhibit the highest tensile strength of 46 MPa, i.e., very close to that of PLLA (48 MPa), which is usually used as biodegradable stent material. Moreover, the tensile modulus of the above composite is 1711 MPa, which is only 34% of PLLA's modulus (4985 MPa). Therefore, novel composites with sufficient tensile strength and better flexibility are obtained as promising cardiovascular stent material. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers [ABSTRACT FROM AUTHOR]