Search

Novel integrated computer‐aided paradigm/workflow for the topology optimization (TO) and additive manufacturing (AM) of steel joints in gridshell structures is proposed. The architecture scheme of gridshell structure was first established and numerically analyzed through Grasshopper parametric platform. Based on the extracted joint geometric parameters and the corresponding loading conditions, the initial joint structures were parametrically modelled using the subdivision surface method. Further parametric TO design was accomplished by the bi‐directional evolutionary structural optimization (BESO) method on the basis of cloud computing server. A series of mesh smoothing and reverse modelling algorithms were applied to the optimized joint to obtain a closed smooth surface in the NURBS form, which was then output as STL file for additive manufacturing. One typical optimized joint was additively manufactured using selective laser melting. The proposed workflow can be extended to a much wider range of spatial structures with various joint types. [ABSTRACT FROM AUTHOR]

Construction trends aim towards the use of modular cold‐formed steel (CFS) wall panels, comprising of CFS studs and sheathing. Their capacity is influenced by different components employed, with the fastener connection between the sheathing board and the frame being the most critical. Furthermore, as repeated loading scenarios are expected to occur within the life cycle of a structure, it is important to address the uncertainty surrounding the connection behaviour under cyclic loading. A series of push‐out tests were carried out for cold‐formed steel sections sheathed with Calcium Silicate Board, using monotonic and cyclic loading protocols. The cyclic protocol employed focuses on the serviceability limit state with a repeated load‐unload step applied for 10 cycles. Two assembly arrangements, namely back‐to‐back and single stud arrangements were employed. Push‐out test results are presented and discussed herein. Recommendations for the test procedure and design of connection in sheathed cold‐formed steel shear walls are proposed. [ABSTRACT FROM AUTHOR]

Steel framed buildings using digitally fabricated light‐gauge steel sections, combined with an offsite panelised fabrication approach, are becoming more widespread and contribute towards reducing cost and erection time without requiring a large workforce to assemble them. Currently, design standards mandate the use of K‐ or X‐bracing in these structures, thus neglecting the beneficial influence of the sheathing on the behaviour of the system, in particular its resistance to lateral loads. This composite behaviour is largely influenced by the performance of the fasteners, which may exhibit tilting, shear failure and fastener pull‐out. This paper takes a first step towards accounting for composite action between light‐gauge steel stud framing and calcium silicate board by focusing on the behaviour of the screws connecting both. Key failure modes are identified, based on direct pull‐out tests and monotonic and cyclic connector shear tests. Significant pinching behaviour was observed under cyclic excitations. [ABSTRACT FROM AUTHOR]

This paper presents the results of four fire tests on full‐scale cast‐in‐situ, hollow core concrete slabs, constructed using filler boxes and an assembly box system. Experimental data include the furnace temperature, temperature distribution in the slab, and vertical and horizontal deflections during the heating and cooling phases, as well as observed cracking patterns. The test data indicate that the tested hollow slabs with plastic filler boxes have good performance in case of standard fire exposure with small vertical deflections and high deflection recovery in long duration testing. For slabs with assembly box systems serious spalling was observed, resulting in integrity failure after 69 minutes in one of the tests. Nevertheless, load bearing capacity was maintained for all tests. The tests highlight the importance of the boundary conditions and the arrangement of the filler system on the fire behavior of the hollow slabs, particularly with respect to the observed cracking, spalling, and structural integrity. [ABSTRACT FROM AUTHOR]

Several damaging tropical cyclones (TCs) have occurred recently over the South Indian Ocean (SIO) region, causing enormous social and economic losses. Yet, while many studies have examined SIO TC characteristics using observations and reanalysis, only a few have assessed these characteristics specifically for this region in climate models, and fewer have investigated their projections under climate change. Here we do this for a historical (1980–2010) and future (2020–2050) period, using multimodel simulations from the High Resolution Model Intercomparison Project, as well as examine biases in the historical period relative to a reanalysis (ERA5). The models have horizontal resolutions of 25–50 km, which has enabled an improved ability to represent tropical cyclones globally in previous studies. TempestExtremes software is employed to detect tropical storm and cyclone tracks. In cases where TempestExtremes cannot be applied due to a lack of requisite variables in a dataset, we instead examine extreme wind speeds in that dataset. For the historical period, we find considerable variation in model biases compared to ERA5, which itself exhibits realistic spatial patterns of tracks and their monthly distribution. Models do at least agree on positive biases in track frequency east of Madagascar and somewhat in the Mozambique Channel. However, the models and ERA5 only produce Category 3 tropical cyclones at best. Wind speeds for 25 km resolution models have much larger positive biases than for 50 km ones, suggesting the former can simulate even higher‐category tropical cyclones. Considerable intermodel variation is also found in track changes between the future and historical periods. No systematic intercategory pattern of change exists, and low signal‐to‐noise may obscure any such patterns in the limited timespan of available data. Thus, no meaningful conclusions can be drawn regarding changes in track intensity. Nevertheless, track frequency broadly decreases across models for the region, as does accumulated cyclone energy. An east‐to‐west shift in track location from east of Madagascar toward the Mozambique Channel is also implied by track frequency and wind speed changes. Our findings provide information to potentially improve storm resiliency in this vulnerable region. [ABSTRACT FROM AUTHOR]