Search

The characterization of lime mortars has become of primary importance in order to obtain information about the raw ingredients and building technology of ancient masonry structures. Five different samples from Anhui province, China, representing two types of lime mortar‐based materials: joint mortars between the bricks of the city wall and lime mortar sealing a tomb coffin, were collected for analysis. Archaeological information about the samples was reported and studies into the microtextural features and mineralogical compositions of those mortars were performed via a multi‐analytical approach. The joint lime mortars between the bricks of city walls, including Mingzhongdu city wall, Mingzhongdu Xihua gate foundation, Zhengyangguan city wall and She county city wall, were found to be aerial lime mortars. The lime mortar from Nanling Tieguai Song dynasty tomb was analysed and found to be a pozzolanic mortar consisting of lime, clay, sand and cocciopesto‐like materials. The analytical results serve as a critical reference for the maintenance and restoration of ancient city walls in Anhui province, and as a starting point for searching for ancient Chinese pozzolanic mortars and technology for making those mortars. [ABSTRACT FROM AUTHOR]

The Yuzhen Palace is one of the nine palaces in the Ancient Building Complex built by order of the Yongle Emperor during the Ming dynasty. The buildings were built with dressed black bricks. As a result of the planned national South–North Water Diversion project, the water level in the Danjiangkou Reservoir that surrounds the Yuzhen Palace was expected to rise by approximately 15 m. To avoid submersion of the site, three gates were elevated by 15 m in 2013 and other buildings dismantled, for later reconstruction. The characterization of the construction materials has therefore become of primary importance. Here, we present results on the plasters of the Longhu Hall. The analysis of materials involved a multi‐analytical approach combining optical and electron microscopy with X‐ray and vibrational spectromicroscopies and thermogravimetry. The results indicated the use of two earthen plaster layers and a whitewash finish coating applied over a thin preparatory intermediate layer to improve the adherence of the finish coating to the earthen plaster. Ramie and straw fibres identified in the earthen plasters were added to reduce shrinkage and cracking during drying. The raw materials used and the application technique pointed to a well‐established construction industry using traditional earthen building materials together with lime technology. [ABSTRACT FROM AUTHOR]

Ceramic fragments from the archaeological excavation of the Iberian-Roman city of Basti (Spain) were studied from a geochemical point of view and by applying a statistical tool to X-ray fluorescence data to discover similarities between ceramic materials. The analysis of these samples was completed by performing a mineralogical analysis, textural observation, and by characterizing the porous system and the colour of the pieces. Our results enabled us to identify the source area of the clayey raw material in the surroundings of Basti and to estimate the firing temperature of the ceramics. Differences in the chemistry were confirmed by characteristics of the pastes and the mineralogical composition of the pieces. Some samples show black cores, which would suggest the presence of organic matter in the raw material and fast firing of the ceramics. The main types of temper were quartz grains and gneiss fragments, although carbonate grains were also identified. Our evidence suggests that most of the samples were well fired. New silicate phases were found to be present in several samples. The mercury intrusion porosimetry verified and confirmed the firing temperature of non-carbonated samples. Colorimetry showed that the colour of the ceramics varied according to the amount of CaO that they contained. [ABSTRACT FROM AUTHOR]

Samples of table and cooking ware, dating back to the Byzantine period of the ancient Greek colony of Cuma, were analysed by optical microscopy, X-ray diffraction, X-ray fluorescence and scanning electron microscopy, in order to reconstruct the main technological properties of these manufactures. The comparison of minero-petrographical data from these samples with those of some kiln wastes allowed us to hypothesize a local manufacture for most of the investigated specimens and to confirm the relative reference groups. A restricted number of samples did not link with the main groups, indicating a regional (or maybe extra-regional) production, in agreement with the widespread circulation of this high-medieval ceramic production in southern Italy. [ABSTRACT FROM AUTHOR]

Excavations carried out in Cuma by the Centre Jean Bérard archaeologists have uncovered a large quantity of pottery. This study is focused on cooking ware and on internal red-slip cookware, also known as Pompeian Red Ware ( Rosso Pompeiano), dated from the first century bc to the first century ad. A comparison with the minero-petrographic composition of beach sands collected along the Bay of Naples coastline highlights the provenance of the temper from the Somma-Vesuvius area, marked by leucite-bearing scoriae and garnet. Petrochemical analyses allow us to distinguish two main groups of pottery characterized by different technological options based on the amount of temper and on the type of clay. X-ray diffraction and scanning electron microscope data demonstrate improved accuracy in the production of Rosso Pompeiano, especially with regard to firing control, which was in a prevailing oxidizing atmosphere and in a narrow thermal range, between about 800 and 900°C. [ABSTRACT FROM AUTHOR]