Search

As promising photovoltaic materials, halide perovskites display large structural modifiability specific to their organic‐inorganic hybrid lattices, thus providing key to unlock many enhanced and novel physical properties. In particular, hybrid perovskites exhibit extraordinary functional responses to mechanical stimulation due to their soft lattices. However, a general pattern describing the evolution of perovskite properties under pressure is missing, rendering such research without theoretical guidance and further the optimization of optoelectronic performance. Here, a framework delineating the pressure‐dependent evolutions of lattice structure, bandgap, and photoluminescence (PL) across four distinct regions in all perovskites assuming 3D and 2D structures is unveiled, accrediting long‐range disorderness to be the common origin of bandgap blueshift, PL annihilation, and structural amorphization. Using such developed model as an instructional guideline, an optical bandgap and luminescent evolutions in quasi‐2D tin(II) iodide perovskites are revealed, where (C4H9NH3)2(CH3NH3)Sn2I7 (C4H9NH3+: butylammonium; CH3NH3+: methylammonium) is found to be the softest perovskite (bulk modulus ≈4.8 GPa) known so far. By meticulously choosing appropriate peak pressure ≈4 GPa, (C4H9NH3)2(CH3NH3)Sn2I7 shows irreversible defect healing (carrier lifetime prolongation from 7 to 22 ns) and permanent PL enhancement upon decompression to ambient condition, signifying practicality of the pressure‐driven behaviors unveiled in this work. [ABSTRACT FROM AUTHOR]

In the pursuit of low‐dose flat‐panel X‐ray detection and imaging, controlling dark current is pivotal. Modulating the bandgap and resistivity of photosensitive materials is one of the methods to reduce dark current. The study introduces a novel approach by first demonstrating a non‐perovskite orthorhombic phase δ‐CsPbI2Br thick film, fabricated using an innovative elastic molecular‐assisted coating strategy. This technique results in a material with an optimized bandgap of 2.30 eV and a significantly elevated resistivity of 2.42 × 10¹⁰ Ω cm. Consequently, this leads to an ultralow dark current of 1.34 nA cm⁻2. Leveraging this advancement, the developed X‐ray detectors showcase a groundbreaking low detection limit of 53 nGyair s⁻¹, surpassing the performance of their cubic‐phase counterparts. Remarkably, the material exhibits excellent phase stability, maintaining its properties for up to 80 days. By integrating with a thin‐film transistor array, a flat‐panel X‐ray detector that delivers high‐quality 8‐bit imaging across a 64 × 64 matrix is successfully engineered. This work not only presents a transformative approach to substantially reduce dark current in low‐dose X‐ray detection but also sets a new benchmark in the field by combining enhanced imaging capability with robust long‐term stability. [ABSTRACT FROM AUTHOR]

The precise, controllable, and safe application of pesticides can effectively reduce pesticide consumption and minimize chemical pollution at the source. Here, a light‐responsive controlled‐release system with flexible control, precise release, easy recovery, and suitability for future pesticide application in aquatic environments is proposed. The system precisely controls the release of pesticides through a light‐responsive composite nanochannel membrane (CTC@SNM/PET) with reactive coumarin derivatives (CTC) as gating molecules. The prepared nanochannel membrane has an ultrathin thickness of 67.5 nm and well‐ordered vertical nanochannels with a uniform size of 1.9 nm, providing a prerequisite for precise molecular gating and high permeability for mass transport. CTC monomers can realize cycloaddition/cyclocracking and nanochannel closing/opening to control the release of pesticides by controlling 365/254 nm ultraviolet light irradiation. As a proof of concept, the light‐responsive controlled‐release system based on CTC@MSF/PET against Saprolegnia parasitica achieves an inhibition rate of more than 95% and reduces pesticide residues by 56.5% compared to the control group. The proposed membrane system has great application potential to easily enable remote, quantitative, timed, and positioned pesticide application, thereby reducing pesticide residues and providing a prospective approach to reducing environmental and human risks. [ABSTRACT FROM AUTHOR]

Secondary trastuzumab resistance represents an evolutionary adaptation of HER2‐positive breast cancer during anti‐HER2 treatment. Most current studies have tended to prioritize HER2 and its associated signaling pathways, often overlooking broader but seemingly less relevant cellular processes, along with their associated genetic and epigenetic mechanisms. Here, transcriptome data is not only characterized but also examined epigenomic and 3D genome architecture information in both trastuzumab‐sensitive and secondary‐resistant breast cancer cells. The findings reveal that the global metabolic reprogramming associated with trastuzumab resistance may stem from genome‐wide alterations in both histone modifications and chromatin structure. Specifically, the transcriptional activities of key genes involved in lipid metabolism appear to be regulated by variant promoter H3K27me3 and H3K4me3 modifications, as well as promoter‐enhancer interactions. These discoveries offer valuable insights into how cancer cells adapt to anti‐tumor drugs and have the potential to impact future diagnostic and treatment strategies. [ABSTRACT FROM AUTHOR]

Perovskite/silicon tandem solar cells (TSCs) have aroused much attentions in recent years. One of keys for achieving highly efficient and stable TSCs is to guarantee effective charge transfer, especially on the rough textured silicon substrate due to the poor adhesion between interlayers. Here, a 2‐fluoroisonicotinic acid (2‐FNA) additive that possesses fluorine (‐F), carboxylic acid (‐COOH), and pyridine nitrogen as functional groups in the perovskite precursor to assist the crystallization process is utilized. It shows that 2‐FNA can efficiently reduce the defects and suppress non‐radiative recombination of perovskite layers by bonding with the uncoordinated Pb2+ ions, formamidinium (FA+), and halide vacancies, leading to notably prolonged carrier lifetime. Most importantly, this found that 2‐FNA aids in the formation of better interfacial contact between the perovskite and C60 layer on top, thus enhancing the interfacial electron extraction therein, eventually leading to an increased power conversion efficiency (PCE) of 28.61% on champion perovskite/silicon TSCs from 27.08% on control counterparts. This work provides a practical route to further advance the PV performance and applicability of perovskite/silicon TSCs. [ABSTRACT FROM AUTHOR]

The photovoltaic (PV) performance of perovskite solar cells (PSCs) has rapidly advanced in the recent years; yet, the stability issue remains one of the last‐mile challenges on the road to commercialization. Charge transport layers and their interfaces with perovskites stand for critical tuning knobs that determine the device stability of PSCs. This review focuses on the effects of modification of SnO2 electron transport layers (ETLs) on the interfacial physicochemical properties and stability of PSC devices. In detail, the intrinsic defects, surface hydroxyls, and nonuniform morphology of SnO2 will negatively impact its interfacial physicochemical properties, thus degrading the device stability of PSCs. To tackle these existing issues, three modification approaches, such as surface morphology control, surface physicochemical modifications, and surface composite‐structure design, are categorized. Lastly, future perspectives in further promoting the stability of PSCs from SnO2 ETLs are raised based on the currently unresolved issues from both material and device levels. [ABSTRACT FROM AUTHOR]

Layered halide perovskites (LHPs) with crystallographically 2D structures have gained increasing interest for photovoltaic applications due to their superior chemical stability and intriguing anisotropic properties, which are in contrast to their conventional 3D perovskite counterparts. The most frequently studied LHPs are Ruddlesden–Popper (RP) phases, which suffer from a carrier‐transport bottleneck due to the van der Waals gap associated with their intrinsic organic interlayer structures. To address this issue, Dion–Jacobson (DJ) and alternating‐cation‐interlayer (ACI) LHPs have rapidly emerged, which exhibit unique structural and (opto)electronic characteristics that may resemble those of the 3D counterparts owing to the eliminated or reduced van der Waals gap. Improved photophysical properties have been achieved in DJ and ACI LHPs, leading towards better photovoltaic performance. Here we provide a comprehensive discussion on the merits and promises of DJ and ACI LHPs from a chemistry perspective. Then, we review recent progress on the synthesis and tailoring of DJ and ACI LHP crystals and thin films, as well as their optoelectronic properties and photovoltaic performance. Finally, we discuss possible pathways to overcome critical challenges to realize the full potential of DJ and ACI LHPs for high‐performance solar cells and beyond. [ABSTRACT FROM AUTHOR]

The soft nature of organic–inorganic halide perovskites renders their lattice particularly tunable to external stimuli such as pressure, undoubtedly offering an effective way to modify their structure for extraordinary optoelectronic properties. Here, using the methylammonium lead iodide as a representative exploratory platform, it is observed that the pressure‐driven lattice disorder can be significantly suppressed via hydrogen isotope effect, which is crucial for better optical and mechanical properties previously unattainable. By a comprehensive in situ neutron/synchrotron‐based analysis and optical characterizations, a remarkable photoluminescence (PL) enhancement by threefold is convinced in deuterated CD3ND3PbI3, which also shows much greater structural robustness with retainable PL after high peak‐pressure compression–decompression cycle. With the first‐principles calculations, an atomic level understanding of the strong correlation among the organic sublattice and lead iodide octahedral framework and structural photonics is proposed, where the less dynamic CD3ND3+ cations are vital to maintain the long‐range crystalline order through steric and Coulombic interactions. These results also show that CD3ND3PbI3‐based solar cell has comparable photovoltaic performance as CH3NH3PbI3‐based device but exhibits considerably slower degradation behavior, thus representing a paradigm by suggesting isotope‐functionalized perovskite materials for better materials‐by‐design and more stable photovoltaic application. [ABSTRACT FROM AUTHOR]

Hybrid organic–inorganic perovskites such as methylammonium lead iodide have emerged as promising semiconductors for energy‐relevant applications. The interactions between charge carriers and lattice vibrations, giving rise to polarons, have been invoked to explain some of their extraordinary optoelectronic properties. Here, time‐resolved optical spectroscopy is performed, with off‐resonant pumping and electronic probing, to examine several representative lead iodide perovskites. The temporal oscillations of electronic bandgaps induced by coherent lattice vibrations are reported, which is attributed to antiphase octahedral rotations that dominate in the examined 3D and 2D hybrid perovskites. The off‐resonant pumping scheme permits a simplified observation of changes in the bandgap owing to the Ag vibrational mode, which is qualitatively different from vibrational modes of other symmetries and without increased complexity of photogenerated electronic charges. The work demonstrates a strong correlation between the lead–iodide octahedral framework and electronic transitions, and provides further insights into the manipulation of coherent optical phonons and related properties in hybrid perovskites on ultrafast timescales. [ABSTRACT FROM AUTHOR]

Bond length and bond angle exhibited by valence electrons is essential to the core of chemistry. Using lead-based organic-inorganic perovskite compounds as an exploratory platform, it is demonstrated that the modulation of valence electrons by compression can lead to discovery of new properties of known compounds. Yet, despite its unprecedented progress, further efficiency boost of lead-based organic-inorganic perovskite solar cells is hampered by their wider bandgap than the optimum value according to the Shockley-Queisser limit. By modulating the valence electron wavefunction with modest hydraulic pressure up to 2.1 GPa, the optimized bandgap for single-junction solar cells in lead-based perovskites, for the first time, is achieved by narrowing the bandgap of formamidinium lead triiodide (HC(NH2)2PbI3) from 1.489 to 1.337 eV. Strikingly, such bandgap narrowing is partially retained after the release of pressure to ambient, and the bandgap narrowing is also accompanied with double-prolonged carrier lifetime. With First-principles simulation, this work opens a new dimension in basic chemical understanding of structural photonics and electronics and paves an alternative pathway toward better photovoltaic materials-by-design. [ABSTRACT FROM AUTHOR]

Two pseudohalide thiocyanate ions (SCN−) have been used to replace two iodides in CH3NH3PbI3, and the resulting perovskite material was used as the active material in solar cells. In accelerated stability tests, the CH3NH3Pb(SCN)2I perovskite films were shown to be superior to the conventional CH3NH3PbI3 films as no significant degradation was observed after the film had been exposed to air with a relative humidity of 95 % for over four hours, whereas CH3NH3PbI3 films degraded in less than 1.5 hours. Solar cells based on CH3NH3Pb(SCN)2I thin films exhibited an efficiency of 8.3 %, which is comparable to that of CH3NH3PbI3 based cells fabricated in the same way. [ABSTRACT FROM AUTHOR]

Halide Perovskites: Suppressed Lattice Disorder for Large Emission Enhancement and Structural Robustness in Hybrid Lead Iodide Perovskite Discovered by High-Pressure Isotope Effect (Adv. Funct. Perovskite, high-pressure, bandgap, mechanical and optical properties, stability Keywords: perovskite; high-pressure; bandgap; mechanical and optical properties; stability EN perovskite high-pressure bandgap mechanical and optical properties stability 1 1 1 02/26/21 20210224 NES 210224 In article number 2009131, Gang Liu and co-workers conduct high-pressure isotope research to discover a significantly suppressed lattice disorder realized by H/D substitution in hybrid halide perovskites, which reveals large emission enhancement and strong structural robustness in isotope-functionalized perovskite materials. [Extracted from the article]

Nanowire lasers hold great potential as nanoscale coherent light sources. The rapid wavelength tuning of such light sources is one of the most important parameters for practical applications. Although significant efforts have been made in the past decades, the fast and reversible lasing wavelength tuning in nanowires or structures alike remains a challenge. Here, by incorporating temperature‐dependent Varshni shift of the bandgap with ultralow thermal inertia of a free‐standing cadmium sulfide (CdS) nanowire, a fast lasing wavelength tuning in single nanowires with excellent reversibility is demonstrated. Above room temperature, a Varshni shift rate (≈0.16 nm K−1) twice larger than that at low temperature (≈ 0.085 nm K−1) is observed, and the nanowire lasing peak is tuned from 514 to 549 nm with step down to 0.075 nm K−1. Using a beam of CO2 laser pulses to instantaneously modulate the temperature of a free‐standing lasing nanowire, a reversible wavelength tuning at a rate of ≈48 000 nm s−1, which is about three orders of magnitude faster than that reported previously is achieved. The results herein suggest a very promising route to fast wavelength tuning in lasing nanowires or other nanostructures, which may lead to fast tunable nanolasers for a variety of nanophotonic applications. [ABSTRACT FROM AUTHOR]