Search

Raman CM geothermometry applied to 126 samples of pelitic schists collected over an area of 11 km × 7 km reveals the thermal structure of the Asemigawa region of the Sanbagawa metamorphic belt, southwest Japan in unprecedented detail. In general, the estimated temperatures gradually increase from south to north in the range of 288–553°C. However, a temperature gap from ~380 to ~440°C is identified near the boundary between the chlorite and garnet zones. This temperature region matches the depth of the continental Moho of the Sanbagawa subduction zone. The temperature gradient in the higher‐temperature domain is higher than that in the lower‐temperature domain, and large‐scale tight folds that affect the thermal structure are developed in the high‐grade units and in the vicinity of the temperature discontinuity. These geological structures probably reflect that the exhumed slab units was dammed at the Moho depth due to the upward movement being impeded by increase in the coupling strength of the overlying rocks associated with exhumation from beneath serpentinite rocks to a shallower domain overlain by crustal rocks. Changes in the coupling strength along the subduction boundary led the strong folding at the higher‐temperature domain and the pre‐formed foliation developed at the Moho depth may have acted as the tectonic boundary, resulting in a temperature discontinuity. These results will contribute to elucidating various geological phenomena occurring in the forearc regions of modern subduction zones. [ABSTRACT FROM AUTHOR]

To understand the preservation of coesite inclusions in ultrahigh‐pressure (UHP) metamorphic rocks, an integrated petrological, Raman spectroscopic and focussed ion beam (FIB) system–transmission electron microscope (TEM) study was performed on a UHP kyanite eclogite from the Sulu belt in eastern China. Coesite grains have been observed only as rare inclusions in kyanite from the outer segment of garnet and in the matrix. Raman mapping analysis shows that a coesite inclusion in kyanite from the garnet rim records an anisotropic residual stress and retains a maximum residual pressure of ~0.35 GPa. TEM observations show quartz is absent from the coesite inclusion–host kyanite grain boundaries. Numerous dislocations and sub‐grain boundaries are present in the kyanite, but dislocations are not confirmed in the coesite. In particular, dislocations concentrate in the kyanite adjacent to the boundary with the coesite inclusion, and they form a dislocation concentration zone with a dislocation density of ~109 cm−2. A high‐resolution TEM image and a fast Fourier transform‐filtered image reveal that a tiny dislocation in the dislocation concentration zone is composed of multiple edge dislocations. The estimated dislocation density in most of the kyanite away from the coesite inclusion–host kyanite grain boundaries is ~108 cm−2, being lower than that in kyanite adjacent to the coesite. In the case of a coesite inclusion in a matrix kyanite, using Raman and TEM analyses, we could not identify any quartz at the grain boundaries. Dislocations are not observed in the coesite, but numerous dislocations and stacking faults are developed in the kyanite. The estimated overall dislocation density in the coesite‐bearing matrix kyanite is ~108 cm−2, but a high dislocation density region of ~109 cm−2 is also present near the coesite inclusion–host kyanite grain boundaries. Inclusion and matrix kyanite grains with no coesite have dislocation densities of ≤108 cm−2. Dislocation density is generally reduced during an annealing process, but our results show that not all dislocations in the kyanite have recovered uniformly during exhumation of the UHP rocks. Hence, one of the key factors acting as a buffer to inhibit the coesite to quartz transformation is the mechanical interaction between the host and the inclusion that lead to the formation of dislocations in the kyanite. The kyanite acts as an excellent pressure container that can preserve coesite during the decompression of rocks from UHP conditions. The search for and study of inclusions in kyanite may be a more suitable approach for tracing the spatial distribution of UHP metamorphic rocks. [ABSTRACT FROM AUTHOR]

The Sanbagawa belt is one of the famous subduction‐related high‐pressure (HP) metamorphic belts in the world. However, spatial distributions of eclogite units in the belt have not yet satisfactorily established, except within the Besshi region, central Shikoku, southwest Japan because most eclogitic rocks were affected by lower pressure overprinting during exhumation. In order to better determine the areal distribution of the eclogite units and their metamorphic features, inclusion petrography of garnet porphyroblasts using a combination of electron probe microanalyser and Raman spectroscopy was applied to pelitic and mafic schists from the Asemi‐gawa region, central Shikoku. All pelitic schist samples are highly retrogressed, and include no index HP minerals such as jadeite, omphacite, paragonite, or glaucophane in the matrix. Garnet porphyroblasts in pelitic schists occur as subhedral or anhedral crystals, and show compositional zoning with irregular‐shaped inner segments and overgrown outer segments, the boundary of which is marked by discontinuous changes in spessartine. This feature suggests that a resorption process of the inner segment occurred prior to the formation of the outer segment, indicating discontinuous crystallization between the two segments. The inner segment of some composite‐zoned garnet grains displays Mn oscillations, implying infiltration of metamorphic fluid during the initial exhumation stage. Evidence for an early eclogite facies event was determined from mineral inclusions (e.g., jadeite, paragonite, glaucophane) in the garnet inner segments. Mafic schists include no index HP minerals in the matrix as with pelitic schists. Garnet grains in mafic schists show simple normal zoning, recording no discontinuous growth during crystal formation. There are no index HP mineral inclusions in the garnet, and thus no evidence suggesting eclogite facies conditions. Quartz inclusions in garnet of the pelitic and mafic schists show residual pressure values (∆ω1) of >8.5 cm−1 and <8.5 cm−1 respectively. The combination of Raman geobarometry and conventional thermodynamic calculations gives peak P–T conditions of 1.6–2.1 GPa at 460–520°C for the pelitic schists. The ∆ω1 values of quartz inclusions in mafic schists are converted to a metamorphic pressure of 1.2–1.4 GPa at 466–549°C based on Raman geothermometry results. These results indicate that a pressure gap definitely exists between the mafic schists and the almost adjacent pelitic schists, which have experienced a different metamorphic history. Furthermore, the peak P–T values of the Asemi‐gawa eclogite unit are compatible with those of Sanbagawa eclogite unit in the Besshi region of central Shikoku, suggesting that these eclogite units share a similar P–T trajectory. The Asemi‐gawa eclogite unit exists in a limited area and is composed of mostly pelitic schists. We infer that these abundant pelitic schists played a key role in buoyancy‐driven exhumation by reducing bulk rock density and strength. [ABSTRACT FROM AUTHOR]

Abstract: Here, we report the first discovery of an amorphous SiO2 phase (APSI phase) in a pseudomorph after coesite included in garnet from an ultrahigh‐pressure (UHP) eclogite from the Su–Lu metamorphic belt, eastern China. Using transmission electron microscopy, Raman spectroscopy and selected area electron diffraction, we show that the internal structure of the pseudomorph consists of an APSI phase with nano/submicrocrystalline particles of quartz and a polycrystalline K‐bearing fibrous sheet‐silicate phase (KFSS phase). The APSI phase‐bearing aggregates included in the garnet might have formed by reactions involving a supercritical fluid during exhumation by the following processes: (1) the development of radial cracks within the host garnet by the phase transition of coesite to quartz; (2) the decomposition of a part of the pseudomorph following infiltration of supercritical fluid; (3) the precipitation of the KFSS phase from the fluid phase during subsequent exhumation and cooling, which was likely promoted by a change in the metamorphic fluid from supercritical and/or subcritical to aqueous fluid; and (4) the rapid precipitation of the APSI phase under a metastable (non‐equilibrium) state, such as quenching, during a later stage of the exhumation. Whether the APSI phase generally formed during exhumation and survived widely throughout the Su‐Lu terrane is unknown. However, the presence of the APSI phase in a UHP eclogite provides new insight into the geodynamic phenomena occurring at continental collision zones. [ABSTRACT FROM AUTHOR]

This report describes an investigation of the composite metamorphic history recorded in garnet porphyroblasts of Sambagawa metasediments, and presents discussions of the possible distribution of eclogite facies lithologies in the Besshi region, central Shikoku, southwest Japan. Garnet grains usually show chemically composite zoning with resolved inner and overgrown outer segments, respectively. The inner segment usually contains paragonite as a sodic phase inclusion and rarely contains omphacite or glaucophane, whereas the outer segment rarely includes albite but no paragonite. The inner segment often includes quartz grains that preserve high residual pressures corresponding to the eclogite facies conditions, whereas the outer segment includes quartz grains that preserve lower residual pressures corresponding to the epidote-amphibolite facies conditions. For this composite-zoned garnet, the assemblage of sodic phase inclusions and the values of the residual pressure of quartz inclusions imply the following successive metamorphic path: prograde eclogite facies stage → decompression and hydration reaction stage → prograde epidote-amphibolite facies stage. Metasediments containing this composite-zoned garnet with such evidence for eclogite facies conditions are more widely distributed than the eclogitic lithologies that contain the assemblage of omphacite + garnet. These results imply that the combination of (i) the chemical composite zoning of garnet, (ii) the nature of sodic phase inclusions, and (iii) the residual pressure of quartz inclusions is useful as criteria to ascertain the true distribution of the lithologies that have experienced eclogite facies metamorphism for the Sambagawa metasediments, which was difficult to recognize in earlier studies. [ABSTRACT FROM AUTHOR]

Aragonite and omphacite-bearing metapelite occurs in the albite–biotite zone of the Togu (Tohgu) area, Besshi region, Sambagawa metamorphic belt, central Shikoku, Japan. This metapelite consists of alternating graphite-rich and graphite-poor layers that contain garnet, phengite, chlorite, epidote, titanite, calcite, albite, and quartz. A graphite-poor layer contains a 1.5-cm ivory-colored lens that mainly consists of phengite, calcite, albite, and garnet. Aragonite, omphacite, and paragonite occur as inclusions in the garnet of the ivory lens. The aragonite has a composition that is close to the CaCO3 end-member: the FeCO3 and MnCO3 components are both less than 0.3 mol% and the SrCO3 component is about 1 mol%. The aragonite + omphacite + quartz assemblage in garnet indicates equilibrium conditions of P > 1.1–1.3 GPa and T = 430–550°C. Quartz grains sealed in garnet of the aragonite and omphacite-bearing sample and other metapelites in the Togu area preserve a high residual pressure that is equivalent to the Sambagawa eclogite samples. These facts suggest that: (i) the Togu area experienced eclogite facies metamorphism; and (ii) thus, eclogite facies metamorphism covered the Sambagawa belt more extensively than previously recognized. [ABSTRACT FROM AUTHOR]

The Higashi-akaishi garnet-bearing ultramafic body in the Sanbagawa metamorphic belt, Southwest Japan, represents a rare example of oceanic-type ultrahigh-pressure metamorphism. The body of 2 km × 5 km is composed mostly of anhydrous dunite with volumetrically minor lenses of clinopyroxene-rich rocks. Dunite samples contain high Ir-type platinum group elements (PGE) and Cr in bulk rocks, high Mg and Ni in olivine, and high Cr in spinel. On the other hand, clinopyroxene-rich rocks contain low concentrations of Ir-type PGE and Cr, high concentrations of fluid-mobile elements in bulk rocks, and low Ni and Mg in olivine. Clinopyroxene is diopsidic with low Al2O3. The compositions of bulk rocks and mineral chemistry of spinel, olivine, and clinopyroxene suggest that the olivine-dominated rocks are residual mantle peridotites after high degrees of influx partial melting, and that the clinopyroxene-rich rocks are cumulates of subduction-related melts. Thus, the Higashi-akaishi ultramafic body originated from the interior of the mantle wedge, most likely the forearc upper mantle. It was then incorporated into the Sanbagawa subduction channel by a mantle flow, and underwent high pressure metamorphism to a depth greater than 100 km. Such a strong active flow in the mantle wedge is likely facilitated by the lack of serpentinites along the interface between the slab and the overlying mantle, as it was too hot for serpentine. These unusually hot conditions and strong active mantle flow may reflect conditions in the earliest stage of development of subduction, and may have been maintained by massive upwelling and subsequent eastward flow of asthenospheric mantle in the northeastern Asian continent in Cretaceous time when the Sanbagawa belt began to form. [ABSTRACT FROM AUTHOR]

The chemical Th-U-total Pb isochron method (CHIME) has been applied to determine the ages of monazite grains from metasediments of greenscshist-amphibolite facies in the Altai orogen, northwest China. The area of distribution of these metamorphic rocks is divided into the Permian (261–268 Ma) central-western and Devonian (377–382 Ma) eastern units on the basis of their metamorphic ages. The Devonian CHIME ages are consistent with the Pb–Pb ages of granitoid in the eastern unit, and support the idea that emplacement of the granitoids was synchronous with regional metamorphism at deep levels. The Permian metamorphic ages (the present study) and igneous ages previously reported from the central-western unit can be interpreted in terms of subduction of crustal material and oceanic plate, and rapid exhumation. [ABSTRACT FROM AUTHOR]

Jadeite-bearing eclogites and associated blueschists locally crop out in a greenschist facies area at Kuldkourla, near the Akeyazhi River in the western Chinese Tianshan region, northwestern China. Garnet in these metamorphic rocks shows prograde zoning with increasing Mg and decreasing Mn from the crystal center towards the rim, and is divided into Ca-poor/Fe-rich core and Ca-rich/Fe-poor mantle parts. The garnet cores include the assemblages of (i) jadeite/omphacite (Xjd = 0.34–0.96) + barroisite/taramite; and (ii) omphacite + barroisite/pargasite, with paragonite, epidote, rutile and quartz as major phases with rare albite. The garnet mantles rarely contain inclusions of omphacite, glaucophane, epidote, rutile and quartz. Major matrix phases of the pre-exhumation stage are omphacite, glaucophane, paragonite, rutile and quartz. These mineral parageneses give pressure ( P)-temperature ( T) conditions of 0.9 GPa/390°C−1.4 GPa/560°C for the stage of the garnet core formation, 1.8 GPa/520°C for the stage of the garnet mantle formation, and 2.2 GPa/495°C-2.4 GPa/535°C for the peak eclogite facies assemblage in the matrix. The estimated P-T conditions and continuous changes of mineral parageneses imply a counterclockwise P-T path which is a combination of (i) an early prograde stage of high-pressure/low-temperature ( HP/LT) blueschist facies and/or LP/LT eclogite facies; (ii) a later prograde stage involving compression with minimal heating; and (iii) a climax-of-subduction stage characterized by a slight decrease of temperature with increasing pressure. The negative dP/dT of the latest subduction stage is possibly a record of the following events after a continuous subduction and ridge approach: (i) material migration within the upper part of the subducting slab, which has an inverse thermal gradient caused by ductile flow and/or slab break during subduction; and/or (ii) temporary cooling of the wedge mantle–slab interface by continuous subduction of a relatively cold slab following subduction of a hotter ridge. [ABSTRACT FROM AUTHOR]

Garnet grains in Sanbagawa quartz eclogites from the Besshi region, central Shikoku commonly show a zoning pattern consisting of core and mantle/rim that formed during two prograde stages of eclogite and subsequent epidote–amphibolite facies metamorphism, respectively. Garnet grains in the quartz eclogites are grouped into four types (I, II, III, and IV) according to the compositional trends of their cores. Type I garnet is most common and sometimes coexists with other types of garnet in a thin section. Type I core formed with epidote and kyanite during the prograde eclogite facies stage. The inner cores of types II and III crystallized within different whole‐rock compositions of epidote‐free and kyanite‐bearing eclogite and epidote‐ and kyanite‐free eclogite at the earlier prograde stage, respectively. The inner core of type IV probably formed during the pre‐eclogite facies stage. The inner cores of types II, III, and IV, which formed under different P–T conditions of prograde metamorphism and/or whole‐rock compositions, were juxtaposed with the core of type I, probably due to tectonic mixing of rocks at various points during the prograde eclogite facies stage. After these processes, they have shared the following same growth history: (i) successive crystal growth during the later stage of prograde eclogite facies metamorphism that formed the margin of the type I core and the outer cores of types II, III, and IV; (ii) partial resorption of the core during exhumation and hydration stage; and (iii) subsequent formation of mantle zones during prograde metamorphism of the epidote–amphibolite facies. The prograde metamorphic reactions may not have progressed under an isochemical condition in some Sanbagawa metamorphic rocks, at least at the hand specimen scale. This interpretation suggests that, in some cases, material interaction promoted by mechanical mixing and fluid‐assisted diffusive mass transfer probably influences mineral reactions and paragenesis of high‐pressure metamorphic rocks. Garnet grains in the quartz eclogites are grouped into four types (I, II, III, and IV) according to the compositional trends of their cores. Type I garnet is the most common and sometimes coexists with other types of garnet in a thin section. The coexistence of the different types of garnet is probably due to deformation‐induced lithological mixing at various points during the prograde eclogite facies stage. [ABSTRACT FROM AUTHOR]