Search

Wiley‐VCH, Weinheim 2016. 2 volumes, 702 pp., hardcover, € 299.00.—ISBN 978‐3527335527 [ABSTRACT FROM AUTHOR]

Wiley‐VCH, Weinheim 2016. 2 Bände, 702 S., geb., 299.00 €.—ISBN 978‐3527335527 [ABSTRACT FROM AUTHOR]

Review: [40 refs. [ABSTRACT FROM AUTHOR]

DFT calculations on the full catalytic cycle for manganese catalysed enantioselective hydrogenation of a selection of ketones have been carried out at the PBE0‐D3PCM//RI‐BP86PCM level. Mn complexes of an enantiomerically pure chiral P,N,N ligand have been found to be most reactive when adopting a facial coordination mode. The use of a new ligand with an ortho‐substituted dimethylamino‐pyridine motif has been calculated to completely transform the levels of enantioselectivity possible for the hydrogenation of cyclic ketones relative to the first‐generation Mn catalysts. In silico evaluation of substrates has been used to identify those likely to be reduced with high enantiomer ratios (er), and others that would exhibit less selectivity; good agreements were then found in experiments. Various cyclic ketones and some acetophenone derivatives were hydrogenated with er's up to 99 : 1. [ABSTRACT FROM AUTHOR]

DFT calculations on the full catalytic cycle for manganese catalysed enantioselective hydrogenation of a selection of ketones have been carried out at the PBE0‐D3PCM//RI‐BP86PCM level. Mn complexes of an enantiomerically pure chiral P,N,N ligand have been found to be most reactive when adopting a facial coordination mode. The use of a new ligand with an ortho‐substituted dimethylamino‐pyridine motif has been calculated to completely transform the levels of enantioselectivity possible for the hydrogenation of cyclic ketones relative to the first‐generation Mn catalysts. In silico evaluation of substrates has been used to identify those likely to be reduced with high enantiomer ratios (er), and others that would exhibit less selectivity; good agreements were then found in experiments. Various cyclic ketones and some acetophenone derivatives were hydrogenated with er's up to 99 : 1. [ABSTRACT FROM AUTHOR]

Review: 36 refs. [ABSTRACT FROM AUTHOR]

As an alternative to conventional asymmetric hydroformylation (AHF), asymmetric transfer hydroformylation (ATHF) by using formaldehyde as a surrogate for syngas is reported. A catalyst derived from commercially available [Rh(acac)(CO)2] (acac=acetylacetonate) and 1,2-bis[(2 S,5 S)-2,5-diphenylphospholano]ethane(1,5-cyclooctadiene) (Ph-BPE) stands out in terms of both activity and enantioselectivity. Remarkably, not only are high selectivities achievable, the reactions are very simple to perform, and higher enantioselectivity (up to 96 % ee) and/or turnover frequencies than those achievable by using the same catalyst (or other leading catalysts) can be obtained by using typical conditions for AHF. [ABSTRACT FROM AUTHOR]

The use of Rh catalysts derived from a phospholane‐phosphite ligand were found to be more productive than the classic rhodium/BINAP system in enantioselective conjugate additions. These catalysts enable the use of lower amounts of aryl boronic acid in an asymmetric arylation reaction that required an impractical excess of nucleophile. This catalyst was also found to enable the coupling of a poorly reactive Michael acceptor, N‐CBz‐2‐3‐dehydro‐4‐piperidone, or the coupling of poorly reactive 2‐furyl boronic acids at ambient or near temperatures. [ABSTRACT FROM AUTHOR]

The scope of carbon monoxide‐free Asymmetric Transfer HydroFormylation (ATHF) procedures using a highly active single catalyst system derived from 1,2‐bis‐((2,5)‐diphenylphospholano)ethane as chiral ligand has been studied. This reveals some highly successful reactions, but also significant limitations. The development of a new protocol in which a catalyst for formaldehyde decomposition to CO and H2 is combined with the catalyst of choice for the subsequent asymmetric hydroformylation is described. This enables ATHF reactions that were problematic to be significantly improved. The new method has been used in the synthesis of several key precursors to biologically active molecules. [ABSTRACT FROM AUTHOR]

The hydroformylation of propene to give predominantly iso‐butanal has been achieved; class‐leading selectivity is possible even at higher temperatures that deliver fast conversion. Racemic rhodium complexes of bidentate phospholane phosphites derived from tropos‐biphenols and unusual solvent systems are the key to the selectivity observed. [ABSTRACT FROM AUTHOR]

The hydroformylation of propene to give predominantly iso‐butanal has been achieved; class‐leading selectivity is possible even at higher temperatures that deliver fast conversion. Racemic rhodium complexes of bidentate phospholane phosphites derived from tropos‐biphenols and unusual solvent systems are the key to the selectivity observed. [ABSTRACT FROM AUTHOR]

Post‐synthetic modification of the hafnium metal–organic framework MOF‐808(Hf) to include triarylphosphine ligands is reported. Sulfonated phenylphosphines are incorporated without oxidation to give a "MOF ligand" that can complex late transition metals such as Ir and Rh to give a bifunctional catalyst containing both metal–phosphine complexes and the Lewis acidic framework hafnium metal sites. The metallated phosphine‐bearing MOFs act as fully heterogeneous bifunctional catalysts for tandem reductive amination and hydroaminomethylation reactions. Post‐synthetic modification of hafnium MOF‐808 with sulfonated arylphosphines and precious metal catalyst pre‐cursors generates highly active and tunable bifunctional catalysts for reductive amination reactions, including alkene hydroaminomethylation. [ABSTRACT FROM AUTHOR]

A new hydrogenation catalyst based on a manganese complex of a chiral P,N,N ligand has been found to be especially active for the hydrogenation of esters down to 0.1 mol % catalyst loading, and gives up to 97 % ee in the hydrogenation of pro-chiral deactivated ketones at 30-50 °C. [ABSTRACT FROM AUTHOR]

A new hydrogenation catalyst based on a manganese complex of a chiral P,N,N ligand has been found to be especially active for the hydrogenation of esters down to 0.1 mol % catalyst loading, and gives up to 97 % ee in the hydrogenation of pro-chiral deactivated ketones at 30-50 °C. [ABSTRACT FROM AUTHOR]

An abstract of the article "Rapid Asymmetric Transfer Hydroformylation (ATHF) of Disubstituted Alkenes Using Paraformaldehyde as a Syngas Surrogate" by Rachael Pittaway and colleagues is presented.

This method uses low catalyst loadings and is suitable for the hydrogenation of tetrasubstituted enamines. [ABSTRACT FROM AUTHOR]

The synthesis of a range of phosphine-diamine, phosphine-amino-alcohol, and phosphine-amino-amide ligands and their ruthenium(II) complexes are reported. Five of these were characterised by X-ray crystallography. The activities of this collection of catalysts were initially compared for the hydrogenation of two model ester hydrogenations. Catalyst turnover frequencies up to 2400 h−1 were observed at 85 °C. However, turnover is slow at near ambient temperatures. By using a phosphine-diamine RuII complex, identified as the most active catalyst, a range of aromatic esters were reduced in high yield. The hydrogenation of alkene-, diene-, and alkyne-functionalised esters was also studied. Substrates with a remote, but reactive terminal alkene substituent could be reduced chemoselectively in the presence of 4-dimethylaminopyridine (DMAP) co-catalyst. The chemoselective reduction of the ester function in conjugated dienoate ethyl sorbate could deliver (2 E,4 E)-hexa-2,4-dien-1-ol, a precursor to leaf alcohol. The monounsaturated alcohol ( E)-hex-4-en-1-ol was produced with reasonable selectivity, but complete chemoselectivity of CO over the diene is elusive. High chemoselectivity for the reduction of an ester over an alkyne group was observed in the hydrogenation of an alkynoate for the first time. The catalysts were also active in the depolymerisation reduction of samples of waste poly(ethylene terephthalate) (PET) to produce benzene dimethanol. These depolymerisations were found to be poisoned by the ethylene glycol side product, although good yields could still be achieved. [ABSTRACT FROM AUTHOR]

The trivalent metal cations Al3+, Cr3+, and Fe3+ were each introduced, together with Sc3+, into MIL-100(Sc,M) solid solutions (M=Al, Cr, Fe) by direct synthesis. The substitution has been confirmed by powder X-ray diffraction (PXRD) and solid-state NMR, UV/Vis, and X-ray absorption (XAS) spectroscopy. Mixed Sc/Fe MIL-100 samples were prepared in which part of the Fe is present as α-Fe2O3 nanoparticles within the mesoporous cages of the MOF, as shown by XAS, TGA, and PXRD. The catalytic activity of the mixed-metal catalysts in Lewis acid catalysed Friedel-Crafts additions increases with the amount of Sc present, with the attenuating effect of the second metal decreasing in the order Al>Fe>Cr. Mixed-metal Sc,Fe materials give acceptable activity: 40% Fe incorporation only results in a 20% decrease in activity over the same reaction time and pure product can still be obtained and filtered off after extended reaction times. Supported α-Fe2O3 nanoparticles were also active Lewis acid species, although less active than Sc3+ in trimer sites. The incorporation of Fe3+ into MIL-100(Sc) imparts activity for oxidation catalysis and tandem catalytic processes (Lewis acid+oxidation) that make use of both catalytically active framework Sc3+ and Fe3+. A procedure for using these mixed-metal heterogeneous catalysts has been developed for making ketones from (hetero)aromatics and a hemiacetal. [ABSTRACT FROM AUTHOR]

Some N-substituted proline derivatives catalyse the reactions of alkyl aldehydes with electrophilic partners, and others give negligible amounts of product. The key reaction between the aldehyde and the proline derivative has been studied, and a rationale for the reactivity observed is presented. Simple proline amides derived from aromatic amines (poor catalysts) form stable imidazolidinones quite rapidly at the expense of enamines, the latter being detected, if at all, for less than an hour. Less basic proline amides form a kinetic diastereomer of an imidazolidinone that very slowly inverts its stereochemistry to give a final thermodynamic product. The stereochemistry of these diastereomers was fully assigned by 1H NMR, NOE, and TOCSY experiments. A proline amide derived from an alkylamine (good catalyst) forms high concentrations of enamine that is only slowly (days) converted into a single diastereomer of an inert imidazolidinone. In contrast, another good catalyst, a proline sulfonamide, immediately forms a reactive imidazolidinone, that rapidly ring-opens and exchanges with other aldehydes. This presumably drip-feeds iminium ions and enamines into the catalytic cycle. Thus, there are two quite different mechanistic regimes that lead to efficient catalysis. These mechanistic insights should now allow some element of rational design of prolinamides for enamine reactions using aldehydes. [ABSTRACT FROM AUTHOR]

The article presents chemical equations related to the article "Rhodium/Phospholane-Phosphite Catalysts Give Unusually High Regioselectivity in the Enantioselective Hydroformylation of Vinyl Arene" by G.M. Noonan and colleagues, published in the journal "Chemical Communications."

The article offers chemical equations related to an article on hydrogenation of cycloalkyl and heterocyclic ketones catalyzed by an iridium complex of a tridentate phosphine-diamine ligand by J.A. Fuentes and colleagues in a 2013 issue of the journal "Chemical Communications Volume 135."

A family of novel mononuclear and dinuclear Pd-complexes of phanephos ligands, allows the highly regioselective formation of the corresponding branched isomers (III) and (VI) in the hydroxycarbonylation and methoxycarbonylation of styrene derivatives (I) and (IV). [ABSTRACT FROM AUTHOR]