Search

Summary: Railroad track problems have been exacerbated by the continuous increase in freight loads and train traffic. The need to implement soil improvement technique in a relatively short window‐time (ie, to minimize train‐traffic disruption) is a key aspect to be considered when adopting a convenient remedial solution to control settlements in railroads constructed on problematic subgrades. Rigid inclusions are selected in this paper because they are reliable solutions relatively easy to implement. Furthermore, they can be used in different ground conditions and are suitable for short construction times (eg, do not require a curing time, as in grouting methods). Typical (analytical) methods for the design of rigid inclusions are adopted in this paper to define an optimal distribution of piles for the case of existing railroads. The selected layout is then analyzed in detail by means of a 3‐D dynamic finite element simulator using both, elastoplastic and elastic models. The performance of rigid inclusions is studied considering different operational scenarios, with dynamic and static loads, as well as involving subgrades with different plasticity index values. It is found that the predictions from the analytical design methods for rigid inclusion tend to be unconservative when compared against the finite element results. As for the numerical solutions, the most unfavorable stress condition is associated with the dynamic elastoplastic finite element solution. It is estimated that the rigid inclusions will contribute to a reduction in the ground settlements of around 15% to 20%, depending on the subgrade plasticity index. [ABSTRACT FROM AUTHOR]

Shrink-swell soils can cause distresses in buildings, and every year, the economic loss associated with this problem is huge. This paper presents a comprehensive system for simulating the soil-foundation-building system and its response to daily weather conditions. Weather data include rainfall, solar radiation, air temperature, relative humidity, and wind speed, all of which are readily available from a local weather station or the Internet. These data are used to determine simulation flux boundary conditions. Different methods are proposed to simulate different boundary conditions: bare soil, trees, and vegetation. A coupled hydro-mechanical stress analysis is used to simulate the volume change of shrink-swell soils due to both mechanical stress and water content variations. Coupled hydro-mechanical stress-jointed elements are used to simulate the interaction between the soil and the slab, and general shell elements are used to simulate structural behavior. All the models are combined into one finite element program to predict the entire system's behavior. This paper first described the theory for the simulations. A site in Arlington, Texas, is then selected to demonstrate the application of the proposed system. Simulation results are shown, and a comparison between measured and predicted movements for four footings in Arlington, Texas, over a 2-year period is presented. Finally, a three-dimensional simulation is made for a virtual residential building on shrink-swell soils to identify the influence of various factors. Copyright © 2015 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]