Search

A series of Pd/CeO2 catalysts was prepared by solution combustion synthesis (SCS) using different Pd precursors. The powders were characterized by complementary techniques such as BET surface area measurements, X-Ray diffraction analysis, X-Ray photoelectron spectroscopy, temperature-programmed reduction, temperature-programmed oxidation, and high-resolution TEM. The results obtained evidenced the formation of a Pd-Ce solid solution on all SCS samples. This solid solution is in the form of an ordered supercell structure only in the SCS catalyst prepared from palladium nitrate. This was correlated to the heat of reaction between Pd(NO3)2 and the fuel. The samples were tested for methane catalytic combustion, and the reaction rates on all SCS samples were approximately twice that of the impregnated counterpart, irrespective of the precursor. This was attributed to the presence of the Pd-O-Ce solid solution, which gave rise to strong Pd-ceria interactions. [ABSTRACT FROM AUTHOR]

Composites of yttria-stabilized zirconia (YSZ) with Sr-doped LaCrO3 (LSC) and Sr-doped LaMnO3 (LSM) were prepared by impregnation of a porous YSZ matrix with aqueous solutions of the appropriate metal salts, followed by sintering to various temperatures. XRD measurements showed that perovskite phases formed after sintering at 1073 K, a temperature well below that at which solid-state reactions with YSZ occur. The conductivities of the LSC-YSZ and LSM-YSZ composites prepared in this way were maximized at a sintering temperature of 1373 K for LSC-YSZ and 1523 K for LSM-YSZ, although reasonable conductivities were achieved at much lower temperatures. The conductivities of the two composites increased much more rapidly with the content of the conductive oxide than has been found with conventional composites formed by mixing and sintering the oxide powders. The implications for using this approach to develop novel electrodes for SOFC applications are discussed. [ABSTRACT FROM AUTHOR]

Examines the fabrication of highly porous yttria-stabilized zirconia by acid leaching nickel from a nickel-yttria-stabilized zirconia cement. Various applications of porous ceramics; Standard methods of porous ceramics preparation; Description of the fabrication method.