Search

Poly(lactic acid) (PLA) is the first melt‐processable, renewable, sustainable and biodegradable natural‐based synthetic fibre. It has a broad range of uses and combines ecological advantages with outstanding performance in textiles. PLA fibre, as an aliphatic polyester, can be dyed with disperse dyes. Apart from the limited number of commercial disperse dyes, disperse dye exhaustion on PLA is generally lower than that on poly(ethylene terephthalate) (PET). In this study, new heterocyclic disazo disperse dyes, substituted with methyl, nitro and chloro groups at their ortho‐, meta‐ and para‐ positions, synthesised in our previous study, were applied to PLA and PET fibres to examine their dyeing performance, and colour fastness and dye exhaustion properties. Different shades of yellow, orange, reddish brown and brown were obtained. Most of the synthesised novel heterocyclic disazo disperse dyes exhibited good build‐up properties with high K/S levels on both fibres. Para‐ bonding substituent provided higher K/S values than meta‐ and ortho‐ positions for –NO2 and –Cl substituents for both fibres. Overall, the most synthesised novel heterocyclic disazo disperse dyes in this study exhibited good build‐up properties with high K/S, exhaustion and wet fastness levels on both PLA and PET fibres. [ABSTRACT FROM AUTHOR]

Gas turbine components are often operated in harsh conditions, which can lead to severe damage. As it is highly desirable from both an economical and an ecological point of view to restore these worn areas instead of manufacturing new components, repair technologies are of huge interest for companies supplying maintenance and overhaul of gas turbines. In this article, two thermal techniques are described that can be used for this application: cold gas spraying (CGS) and vacuum plasma spraying (VPS). The CGS process allows the deposition of metallic coatings with excellent mechanical properties; several examples including γ‐TiAl, Inconel (IN) 718, and IN 738 are given. Essential for the deposition of high‐performance coatings in CGS is to exceed the so‐called critical velocity. This is discussed also with experimental findings. As a final topic, experiments that use VPS for the repair of single‐crystal alloys are described. [ABSTRACT FROM AUTHOR]

Gadolinium zirconate (Gd2Zr2O7, GZO) as an advanced thermal barrier coating (TBC) material, has lower thermal conductivity, better phase stability, sintering resistance, and calcium‐magnesium‐alumino‐silicates (CMAS) attack resistance than yttria‐stabilized zirconia (YSZ, 6‐8 wt%) at temperatures above 1200°C. However, the drawbacks of GZO, such as the low fracture toughness and the formation of deleterious interphases with thermally grown alumina have to be considered for the application as TBC. Using atmospheric plasma spraying (APS) and suspension plasma spraying (SPS), double‐layered YSZ/GZO TBCs, and triple‐layered YSZ/GZO TBCs were manufactured. In thermal cycling tests, both multilayered TBCs showed a significant longer lifetime than conventional single‐layered APS YSZ TBCs. The failure mechanism of TBCs in thermal cycling test was investigated. In addition, the CMAS attack resistance of both TBCs was also investigated in a modified burner rig facility. The triple‐layered TBCs had an extremely long lifetime under CMAS attack. The failure mechanism of TBCs under CMAS attack and the CMAS infiltration mechanism were investigated and discussed. [ABSTRACT FROM AUTHOR]

During the past decade, gadolinium zirconate (Gd2Zr2O7, GZO) has attracted interest as an alternative material to partially yttria-stabilized zirconia ( YSZ) for thermal barrier coatings ( TBCs). Despite the well-known benefits of GZO, such as lower thermal conductivity and superior temperature capability compared to YSZ, processing of GZO via atmospheric plasma spraying ( APS) still remains a challenge. Here, we report on APS experiments which were performed to investigate the influence of processing on GZO microstructure and lifetime of GZO/ YSZ double-layer TBCs. Different microstructures of GZO were produced and characterized in terms of porosity, stoichiometry, Young′s modulus, and their effects on the lifetime of YSZ/ GZO double-layer TBCs were discussed. Particle diagnostics were utilized for the optimization of the process parameters with respect to different microstructures of GZO and stoichiometry. It was found that both cumulative porosity of GZO and pore size distribution, which alter the Young′s modulus significantly, govern the lifetime of double layers. In addition, it was shown that the deviation in GZO stoichiometry due to gadolinia evaporation in the investigated range does not display any critical effect on lifetime. [ABSTRACT FROM AUTHOR]

Processing of Gd2 Zr2 O7 by atmospheric plasma spraying ( APS) is challenging due to the difference in vapor pressure between gadolinia and zirconia. Gadolinia is volatilized to a greater extent than zirconia and the coating composition unfavorably deviates from the initial stoichiometry. Aiming at stoichiometric coatings, APS experiments were performed with a TriplexPro™ plasma torch at different current levels. Particle diagnostics proved to be an effective tool for the detection of potential degrees of evaporation via particle temperature measurements at these varied current levels. Optimized spray parameters for Gd2 Zr2 O7 in terms of porosity and stoichiometry were used to produce double-layer TBCs with an underlying yttria-stabilized zirconia (7 YSZ) layer. For comparison, double layers were also deposited with relatively high torch currents during Gd2 Zr2 O7 deposition, which led to a considerable amount of evaporation and relatively low porosities. These coatings were tested in thermal cycling rigs at 1400°C surface temperature. Double layers manufactured with optimized Gd2 Zr2 O7 spray parameters revealed very good thermal cycling performance in comparison to standard 7 YSZ coatings, whereas the others showed early failures. Furthermore, different failure modes were observed; coatings with long lifetime failed due to TGO growth, while the coatings displaying early failures spalled through crack propagation in the upper part of the 7 YSZ layer. [ABSTRACT FROM AUTHOR]