Search

Quantitative reconstruction of palaeohydrology from fluvial stratigraphy provides sophisticated insights into the response, and relative impact, of tectonic and climatic drivers on ancient fluvial landscapes. Here, field measurements and a suite of quantitative approaches are used to develop a four‐dimensional (space and time) reconstruction of palaeohydrology in Late Cretaceous palaeorivers of central Utah, USA – these rivers drained the Sevier mountains to the Western Interior Seaway. Field data include grain‐size and cross‐set measurements and span five parallel fluvial systems, two of which include up‐dip to down‐dip transects, across seven stratigraphic intervals through the Blackhawk Formation, Castlegate Sandstone and Price River Formation. Reconstructed palaeohydrological parameters include fluvial morphologies (flow depths, palaeoslopes, palaeorelief and planform morphologies) and various hydrodynamic properties (flow velocities, water discharges and sediment transport modes). Results suggest that fluvial morphologies were similar in space and time; median flow depths spanned 2 to 4 m with marginally greater flow depths in southerly systems. Meanwhile palaeoslopes spanned 10−3 to 10−4, decreasing downstream by an order of magnitude. The most prominent spatio‐temporal change is an up to four‐fold increase in palaeoslope at the Blackhawk–Castlegate transition; associated alluvial palaeorelief is tens of metres during Blackhawk deposition and >100 m during Castlegate Sandstone deposition. This study observed no change in unit water discharges at the Blackhawk–Castlegate transition, which argues against a climatically driven increase in palaeoslope and channel steepness. These findings instead point to a tectonically driven palaeoslope increase, although one limitation in this study is uncertainty in palaeochannel widths, which directly influences total water discharges. These reconstructions complement and expand on extensive previous work in this region, which enables the efficacy of quantitative reconstruction tools to be tested. Comparison of results with facies‐based interpretations indicates that quantitative tools work well, but inconsistencies in more complex reconstructions (for example, planform morphologies) highlight the need for further work. [ABSTRACT FROM AUTHOR]

Depositional stratigraphy represents the only physical archive of palaeo‐sediment routing and this limits analysis of ancient source‐to‐sink systems in both space and time. Here, we use palaeo‐digital elevation models (palaeoDEMs; based on high‐resolution palaeogeographic reconstructions), HadCM3L general circulation model climate data and the BQART suspended sediment discharge model to demonstrate a predictive, forward approach to palaeo‐sediment routing system analysis. To exemplify our approach, we use palaeoDEMs and HadCM3L data to predict the configurations, geometries and climates of large continental catchments in the Cenomanian and Turonian North American continent. Then, we use BQART to estimate suspended sediment discharges and catchment‐averaged erosion rates and we map their spatial distributions. We validate our estimates with published geologic constraints from the Cenomanian Dunvegan Formation, Alberta, Canada, and the Turonian Ferron Sandstone, Utah, USA, and find that estimates are consistent or within a factor of two to three. We then evaluate the univariate and multivariate sensitivity of our estimates to a range of uncertainty margins on palaeogeographic and palaeoclimatic boundary conditions; large uncertainty margins (≤50%/±5°C) still recover estimates of suspended sediment discharge within an order of magnitude of published constraints. PalaeoDEMs are therefore suitable as a first‐order investigative tool in palaeo‐sediment routing system analysis and are particularly useful where stratigraphic records are incomplete. We highlight the potential of this approach to predict the global spatio‐temporal response of suspended sediment discharges and catchment‐averaged erosion rates to long‐period tectonic and climatic forcing in the geologic past. [ABSTRACT FROM AUTHOR]

Numerical tidal modelling, when integrated with other geological datasets, can significantly inform the analysis of physical sedimentation processes and the depositional and preservational record of ancient tide‐influenced shoreline–shelf systems. This is illustrated in the Oligo–Miocene of the South China Sea, which experienced significant changes in basin physiography and where tide‐influenced, shoreline–shelf deposition is preserved in ca 10 sub‐basins. Palaeogeographic reconstructions, palaeotidal modelling and regional sedimentary facies analysis have been integrated in order to evaluate the spatial–temporal evolution and physiographic controls on tidal sedimentation and preservation during the ca 25 Myr Oligo–Miocene record in the South China Sea. Palaeotidal modelling, using an astronomically‐forced and global tidal model (Fluidity) at a maximum 10 km resolution, indicates that spring tides along Late Oligocene to Middle Miocene coastlines were predominantly mesotidal–macrotidal and capable of transporting sand, which reflects two main conditions: (i) increased tidal inflow through wider ocean connections to the Pacific Ocean; and (ii) tidal amplification resulting from constriction of the tidal wave in a 'blind gulf' type of basin morphology. Since the Middle to Late Miocene, a reduction in the amplitude and strength of tides in the South China Sea was mainly due to diminishing tidal inflow from the Pacific Ocean caused by the northward movement of the Philippines and Izu–Bonin–Mariana arc. Sensitivity tests to palaeogeographic and palaeobathymetric uncertainty indicate that regional‐scale (hundreds to thousands of kilometres) palaeogeographic changes influencing tidal inflow versus outflow can override local‐scale (one to hundreds of kilometres) changes to tidal resonance and convergence effects (funnelling and shoaling), such as shelf width and shoreline geometry. Palaeotidal model results compare favourably to the distribution and sedimentary fabric of Oligo–Miocene, tide‐influenced, shoreline–shelf successions in peripheral South China Sea basins. However, the preservation potential of tidal deposits is lower in open coastline environments, probably due to enhanced reworking during storms and river floods. [ABSTRACT FROM AUTHOR]

The Miocene to Modern Baram Delta Province is a highly efficient source to sink system that has accumulated 9 to 12 km of coastal-deltaic to shelf sediments over the past 15 Myr. Facies analysis based on ca 1 km of total vertical outcrop stratigraphy, combined with subsurface geology and sedimentary processes in the present-day Baram Delta Province, suggests a 'storm-flood' depositional model comprising two distinct periods: (i) fair-weather periods are dominated by alongshore sediment reworking and coastal sand accumulation; and (ii) monsoon-driven storm periods are characterized by increased wave-energy and offshore-directed downwelling storm flow that occur simultaneously with peak fluvial discharge caused by storm precipitation ('storm-floods'). The modern equivalent environment has the following characteristics: (i) humid-tropical monsoonal climate; (ii) narrow ( ca <100 km) and steep ( ca 1°), densely vegetated, coastal plain; (iii) deep tropical weathering of a mudstone-dominated hinterland; (iv) multiple independent, small to moderate-sized (102 to 105 km2) drainage basins; (v) predominance of river-mouth bypassing; and (vi) supply-dominated shelf. The ancient, proximal part of this system (the onshore Belait Formation) is dominated by strongly cyclical sandier-upward successions (metre to decametre-scale) comprising (from bottom to top): (i) finely laminated mudstone with millimetre-scale silty laminae; (ii) heterolithic sandstone-mudstone alternations (centimetre to metre-scale); and (iii) sharp-based, swaley cross-stratified sandstone beds and bedsets (metre to decimetre-scale). Gutter casts (decimetre to metre-scale) are widespread, they are filled with swaley cross-stratified sandstone and their long axes are oriented perpendicular to the palaeo-shoreline. The gutter casts and other associated waning-flow event beds suggest that erosion and deposition was controlled by high-energy, offshore-directed, oscillatory-dominated, sediment-laden combined flows within a shoreface to delta front setting. The presence of multiple river mouths and exceptionally high rates of accommodation creation (characteristic of the Neogene to Recent Baram Delta Province; up to 3000 m Ma−1), in a 'storm-flood'-dominated environment, resulted in a highly efficient and effective offshore-directed sediment transport system. [ABSTRACT FROM AUTHOR]

New devolutionary powers for education have been enthusiastically seized on by politicians and policy-makers alike to promote a more integrated and holistic form of education in Scotland. This period of curriculum renewal offers the prospect of increased levels of outdoor education; however, to date there is a lack of a clearly agreed rationale for learning and clarity about how curriculum will be experienced by students. Consequently, we analyse pertinent conceptual questions about these matters through reviewing articles and policy announcements prior to advancing, in a preliminary fashion, a rationale for outdoor education which conceives of outdoor learning primarily as a moral endeavour. In developing the proposed rationale as the organising framework for learning, the article critically considers the multifarious challenges of connecting policy intentions with the authentic learning experiences of students. In so doing it discusses many of the most apparent curriculum and pedagogical barriers to learning, which have led in recent years to fragmented provision and the under-realisation of increased levels of deeply embedded and connected outdoor learning experiences. [ABSTRACT FROM AUTHOR]

Lower to Middle Turonian deposits within the Bohemian Cretaceous Basin (Central Europe) consist of coarse-grained deltaic sandstones passing distally into fine-grained offshore sediments. Dune-scale cross-beds superimposed on delta-front clinoforms indicate a vigorous basinal palaeocirculation capable of transporting coarse-grained sand across the entire depth range of the clinoforms ( ca 35 m). Bi-directional, alongshore-oriented, trough cross-set axes, silt drapes and reactivation surfaces indicate tidal activity. However, the Bohemian Cretaceous Basin at this time was over a thousand kilometres from the shelf break and separated from the open ocean by a series of small islands. The presence of tidally-influenced deposits in a setting where co-oscillating tides are likely to have been damped down by seabed friction and blocked by emergent land masses is problematic. The Imperial College Ocean Model, a fully hydrodynamic, unstructured mesh finite element model, is used to test the hypothesis that tidal circulation in this isolated region was capable of generating the observed grain-size distributions, bedform types and palaeocurrent orientations. The model is first validated for the prediction of bed shear stress magnitudes and sediment transport pathways against the present-day North European shelf seas that surround the British Isles. The model predicts a microtidal to mesotidal regime for the Bohemian Cretaceous Basin across a range of sensitivity tests with elevated tidal ranges in local embayments. Funnelling associated with straits increases tidal current velocities, generating bed shear stresses that were capable of forming the sedimentary structures observed in the field. The model also predicts instantaneous bi-directional currents with orientations comparable with those measured in the field. Overall, the Imperial College Ocean Model predicts a vigorous tide-driven palaeocirculation within the Bohemian Cretaceous Basin that would indisputably have influenced sediment dispersal and facies distributions. Palaeocurrent vectors and sediment transport pathways however vary markedly in the different sensitivity tests. Accurate modelling of these parameters, in this instance, requires greater palaeogeographic certainty than can be extracted from the available rock record. [ABSTRACT FROM AUTHOR]

Due to a lack of modern analogues, debate surrounds the importance of tides in ancient epi-continental seas. However, numerical modelling can provide a quantitative means of investigating palaeo-tidality without recourse to analogues. Finite element modelling of the European Upper Carboniferous epi-continental seaway predicts an exceedingly low Lunar tidal range ( ca 5 cm in the open water regions of the UK and Southern North Sea). The Imperial College Ocean Model (ICOM) uses finite element methods and an unstructured tetrahedral mesh that is computationally very efficient. The accuracy and sensitivity of ICOM tidal range predictions were tested using bathymetric data from the present-day Mediterranean Sea. The Mediterranean Sea is micro-tidal and varies in depth up to 5·4 km with an average depth of 1–2 km. ICOM accurately predicts the tidal range given both a realistic, but smoothed, bathymetry and a straight sided basin with a uniform depth of 1 km. Variation in uniform depth from 100 to 3000 m with and without islands consistently predicts micro-tidality, demonstrating that the model is robust and the effect of bathymetric uncertainty on model output is relatively small. The extremely low tidal range predicted for the European Upper Carboniferous is thus deemed robust. Putative Upper Carboniferous tidal deposits have been described in the UK and southern North Sea, but are represented by cyclic rhythmites and are limited to palaeo-estuaries. Calculations based on an embayed coast model show that the tidal range could have been amplified to ca 1 m in estuaries and that this is sufficient to form cyclic rhythmites. Without tidal mixing, the tropical equatorial heat and salinity enhancement would promote stratification in the open water body. The introduction of organic matter probably caused anoxia, biotic mortality and carbon accumulation, as evidenced by numerous black ‘marine-band’ shales. [ABSTRACT FROM AUTHOR]

The article focuses on the architectural designs of architect Davis Adjaye in London, England. It was claimed that his work has become a focus of attention for broadsheet color supplements and interior magazines. The author stated that Adjaye's concept of furniture goes beyond the actual design of setpieces with his treatment of specific architectural elements. Furthermore, the attention of Adjaye's architecture was intended to direct attention away from physical questions.