Search

This ENETS guidance paper for well‐differentiated nonfunctioning pancreatic neuroendocrine tumours (NF‐Pan‐NET) has been developed by a multidisciplinary working group, and provides up‐to‐date and practical advice on the management of these tumours. Using the extensive experience of centres treating patients with NF‐Pan‐NEN, the authors of this guidance paper discuss 10 troublesome questions in everyday clinical practice. Our many years of experience in this field are still being verified in the light of the results of new clinical, which set new ways of proceeding in NEN. The treatment of NF‐Pan‐NEN still requires a decision of a multidisciplinary team of specialists in the field of neuroendocrine neoplasms. This ENETS guidance paper provides up‐to‐date practical advice on the NF‐Pan‐NET diagnosis and treatment. Management of NF‐Pan‐NET patients requires a NET‐dedicated MDT decision. ENETS Centres of Excellence should be strongly considered to be involved in the diagnostic‐therapeutic strategy of these patients. Further studies are needed to fulfil the unmet needs in this field focusing on prognostic molecular markers, dilemmas concerning the selection of a therapeutic approach as well as the sequence of their use to achieve success in the management of NF‐Pan‐NETs patients. [ABSTRACT FROM AUTHOR]

This study aims to decrease the dielectric constant of kraft paper by 1,2,3,4‐butanetetracarboxylic acid (BTCA) esterification crosslinking. Kraft paper samples are treated with various concentrations of BTCA to prepare modified paper with different reaction degrees. Morphology and surface chemical composition are characterized. The dielectric constant and loss of the plain and modified paper are also investigated. Results show that esterification occurs successfully between cellulose molecular chain and BTCA. The intrinsic dielectric constant and loss of 6 g L−1 BTCA‐treated paper decrease by 23.5% and 36.3%, respectively, at 50 Hz. The esterification can reduce the hydroxyl amounts on cellulose. The formed crosslinking network between the cellulose chains restricts the cellulose orientation polarization, thereby reducing cellulose polarizability. The electrical strength, mechanical properties, and thermal behavior of the samples are explored to evaluate comprehensively the modifying effect. BTCA esterification crosslinking proves to be a promising method for decreasing the dielectric constant of kraft paper. [ABSTRACT FROM AUTHOR]

Purpose: This study aims to explore the daily stressors experienced by adolescents with Type 1 diabetes (T1D) and the perceived impact of those stressors on their self‐management and psychological well‐being. Design and Methods: We conducted semistructured in‐depth telephone interviews using a qualitative descriptive approach with 20 adolescents aged 14–17 years with T1D and analyzed subsequent data using thematic analysis. Results: Participants who were non‐Hispanic white made up 85% of the sample, 75% identified as female and mean age was 15 years. The study identified two key themes: "the everyday stress of living with diabetes" and "managing stress and supporting psychological well‐being." Participants described heightened mental load, the impact of daily activities, stress associated with public diabetes management, and added stress due to COVID‐19. Primary mitigation techniques included family support, peer support networks, activity engagement, and personal acceptance of their condition. Practice Implications: We found that there is a compound effect that occurs with balancing daily disease management with normative activities of daily living. These data will help guide the design of new interventions and tailoring of existing interventions. Future intervention development may include physical exercise, mindfulness training, and stress reducing techniques. [ABSTRACT FROM AUTHOR]

Effective biodiversity protection is generally associated with a strict rule of law and democratic participation in environmental decision making. Norway's exceptional ranking in terms of governance, however, has failed to be a predictor of effective biodiversity protection. Through a systematic review of the main regulatory frameworks relevant to protecting biodiversity in Norway, this article analyses the misconceptions, perverse incentives and institutional bottlenecks that lie at the centre of the problem. The analysis finds three overarching barriers that regulatory frameworks have created to the effective protection and promotion of biodiversity in Norway, namely, a governance system based on diffuse legal obligations and responsibilities, excessive trust in private operators and considerable discretion to local entities. Accordingly, this article proposes three enabling factors, and related reform suggestions, for mitigating such barriers and domesticating earth system governance in biodiversity matters. [ABSTRACT FROM AUTHOR]

This article summarizes several studies on various topics. The first study examines the relationship between internalizing symptoms and problematic pornography use in college students, finding that higher levels of internalizing symptoms are associated with higher levels of problematic pornography use. The second study focuses on sleep-wake disorders among veterans with opioid use disorder, revealing that 24.4% of veterans with opioid use disorder have a sleep disorder, with obstructive sleep apnea being the most common type. The third study explores the association between cannabis use and lifetime suicidal ideation and attempts, finding that cannabis use is associated with an increased risk of suicidal ideation and attempts. Another study examines the impact of mandatory buprenorphine training and the removal of the X-waiver on prescribing patterns for physicians, showing that while there was an increase in knowledge and a decrease in concern about legal consequences after training, there were no significant differences in buprenorphine prescribing patterns. The fifth study focuses on emergency department patients with illicit fentanyl use and co-occurring psychiatric disorders, highlighting the prevalence of illicit fentanyl use and the need for routine assessments and treatment for mental health and substance misuse in this population. Lastly, a study examines the burden of emergency admissions and hospitalizations for nonfatal acute iatrogenic events in people with sickle cell disease and opioid dependence or tolerance, emphasizing the need for improved interventions and better access to care for this population. The first article also highlights the need for further research to improve opioid treatment strategies and [Extracted from the article]

As the field of ophthalmology has evolved in the last several decades, so has the gender distribution of ophthalmologists. We conducted a narrative review to further characterise the status of women in the realm of publication, presentations, editorial positions, grants, academic promotion, and financial compensation. While the proportion of women publishing, presenting, and filling academic and editorial roles has increased over time, it still does not match that of men. Women are more likely to be first authors instead of senior authors, have lower average h‐indices, and are awarded fewer grants. The magnitude of some of these differences is smaller when adjusted for women's shorter career duration on average. Despite increased representation of women in ophthalmology, women continue to receive less compensation for the same work. This review highlights that more can be done to improve gender parity in ophthalmology. [ABSTRACT FROM AUTHOR]

Death is an inevitable part of life and highly relevant to information management: its approach often requires preparation, and its occurrence often demands a response. Many works in information science have acknowledged so much, and yet death is rarely a focused topic, appearing instead sporadically and disconnected across research. As a result there is no introduction to, overview of, or synthesis across studies on death and information. We therefore conducted an extensive literature search and reviewed nearly 300 scholarly publications at the intersection of death and information (and data) management. Covering seven topics in total, we review two groups of work directly engaging information management in relation to death (digital possessions, inheritance, and legacy; information behavior, needs, and practices around death), three engaging death and technology that require information and its management (death and the Internet, thanatosensitive design and technology‐augmented death practices, and the digital afterlife and digital immortality), and two reflecting the ethical and legal dimensions unique to death and information. We then integrate the collective findings to summarize the landscape of death‐related information research, outline remaining challenges for individuals, families, institutions, and society, and identify promising directions for future information science research. [ABSTRACT FROM AUTHOR]

Reviews have long been recognized as among the most important forms of scientific communication. The rapid growth of the primary literature has further increased the need for reviews to distill and interpret the literature. This review on Reviews and Reviewing: Approaches to Research Synthesis encompasses the evolution of the review literature, taxonomy of review literature, uses and users of reviews, the process of preparing reviews, assessment of review quality and impact, the impact of information technology on the preparation of reviews, and research opportunities for information science related to reviews and reviewing. In addition to providing a synthesis of prior research, this review seeks to identify gaps in the published research and to suggest possible future research directions. [ABSTRACT FROM AUTHOR]

Data culture/s as a research topic has begun to attract attention from a wide range of disciplines, albeit with inconsistent application of definitions, dimensions, and applications. This work builds on a call to investigate data culture/s within the information studies domain as a topic related to, but distinct from, information culture. The purpose of this study is to explore what is known about data culture/s in greater depth. We apply a retroductive approach to select and consider likely dimensions, inputs, and aspects of data culture/s in order to further map this construct to the literature, and thereby highlight gaps and opportunities to add to this body of knowledge. The initial candidate dimensions explored below include data‐related skills and attitudes, data sharing, data use/reuse, data ethics and governance, and a specific focus on Indigenous perspectives to provide insights on why and how a group may contest the emergent dominant discourse of data culture/s. Our conclusion highlights areas needing further research to fully define and examine the dimensions, inputs, and aspects of data culture/s, and calls for greater understanding and engagement with data culture/s from the information studies community. [ABSTRACT FROM AUTHOR]

Successful practical implementation of bioelectrochemical systems (BES) requires developing affordable electrode structures that promote efficient electrical communication with microbes. Recent efforts have centered on immobilizing bacteria with organic semiconducting polymers on electrodes via electrochemical methods. This approach creates a fixed biocomposite that takes advantage of the increased electrode's electroactive surface area (EASA). Here, it is demonstrated that a biocomposite comprising the water‐soluble conjugated polyelectrolyte CPE‐K and electrogenic Shewanella oneidensis MR‐1 can self‐assemble with carbon paper electrodes, thereby increasing its biocurrent extraction by ≈6‐fold over control biofilms. A ≈1.5‐fold increment in biocurrent extraction is obtained for the biocomposite on carbon paper relative to the biocurrent extracted from gold‐coated counterparts. Electrochemical characterization revealed that the biocomposite stabilized with the carbon paper more quickly than atop flat gold electrodes. Cross‐sectional images show that the biocomposite infiltrates inhomogeneously into the porous carbon structure. Despite an incomplete penetration, the biocomposite can take advantage of the large EASA of the electrode via long‐range electron transport. These results show that previous success on gold electrode platforms can be improved when using more commercially viable and easily manipulated electrode materials. [ABSTRACT FROM AUTHOR]

Paper‐based microfluidic devices are used in point of care diagnostic, sensor technology or lab‐on‐a‐chip devices. Although a number of studies has been reported, only relatively few paper‐based diagnostic tools are available on the market. A remaining challenge is the mechanistic understanding and precise design of capillary flow in paper. Here, silica coatings are applied to control paper wettability, fiber swelling, and thus fluid transport in all three dimensions of a paper sheet via a simple dip‐coating and post‐treatment process. By adjusting the three‐dimensional silica coating distribution, a three‐dimensional asymmetric wettability gradient within the paper sheet is obtained which controls the fluid distribution and imbibition. The correlation between silica coating amount and silica distribution with the resulting fluid behavior is systematically elaborated by analyzing the interaction between fiber and fluid as well as the fiber swelling by applying confocal microscopy. Three different silica‐amount dependent fluid distribution states are demonstrated. These new insights into the mechanism of fluid imbibition using simple silica coatings enable the specific design of different imbibition mechanisms and thus the adjustment of the microfluidic properties in paper‐based microfluidic devices with control over all three spatial dimensions of a paper sheet in one fabrication step. [ABSTRACT FROM AUTHOR]

The efficiency of classical Fenton (CF) and modified Fenton (MF) as well as photo‐Fenton processes in real wastewater treatment of pulp and paper (P&P) mill was investigated in this study. The chemical oxygen demand (COD) was chosen as the reference measurement for evaluating the treatment's efficiency. After determining the optimum parameters for each process, the effect of adding ultrasound (US) on improving treatment efficiency was examined. In addition, kinetic study and phytotoxicity analysis were conducted under optimum conditions for all processes. With pH 4, reaction time 50 min, 1.2 g/L Fe2+ and 8 g/L H2O2 dosages, the best removal efficiency (RE) of COD was determined to be 82.18% in CF process, and this rate rose to 90.1% when US was added. The best RE in MF process was 84.16% with the application of UV‐C, pH 4, reaction time 50 min, 1 g/L Fe0 and 8 g/L H2O2 doses, although it increased to 93.4% when US was applied. The greatest results in the seed germination test were achieved in US processes with 100% of germination percentage (GP) for spinach and tomato and 90% for cress. In the economic evaluation, when conducting the treatment without US, the estimated relative cost decreased in a 15 and 16%, for CF/UV‐C and CF processes respectively, whereas the CF process was 64% cheaper than the MF process in all applications. The US contributed to enhanced water treatment efficiency by having a significant synergistic impact on Fenton applications. Hence, the combination of photo‐Fenton and ultrasound to treat effluent from P&P mills proved to be an effective and promising technique. [ABSTRACT FROM AUTHOR]

The insulation paper is a crucial factor for evaluating the insulation status of transformers. The traditional evaluation methods for insulation paper are dissolved gas component content analysis (CO and CO2) and furfural (2‐FAL) content analysis in oil. The detection principle of the former leads to its low accuracy, while the field application effect of the latter is not ideal due to the easy oxidation of furfural and low content. Methanol, result of its good stability and high production compared with other marker products (CO, CO2, 2‐FAL) has been investigated as a novel marker for aging evaluation of transformer insulating paper in recent years. The results of the investigation indicated that there is a good correlation between the content of methanol in oil and the degree of polymerization under laboratory conditions, which reflected the insulation aging state of the transformer insulating paper more accurately. This paper summarizes the current research status of methanol formation mechanism, detection methods and aging evaluation in insulating oil, and points out the key problems to be solved and development prospects, hoping to provide relevant reference for aging evaluation of oil immersed power transformer. [ABSTRACT FROM AUTHOR]

Flexible sensors have versatile applications in a home environment to create better ambient intelligence, which still have high fabrication costs and disposable value. As a proof‐of‐concept example to resolve these problems, the graphite‐based sensors on a disposable paper cup by laser patterning to measure the water level and temperature are proposed. The optimal process parameters of graphitic film, sensing mechanisms, and the sensor performance are investigated in the experiments. Moreover, the paper cup with graphitic sensors is simulated by the finite element method to analyze the experimental results. This fast and low‐cost manufacturing method may open up avenues for the development of disposable flexible electronics in smart home necessities. [ABSTRACT FROM AUTHOR]

The human absorption, distribution, metabolism, and excretion (hADME) study is the cornerstone of the clinical pharmacology package for small molecule drugs, providing comprehensive information on the rates and routes of disposition and elimination of drug‐related material in humans through the use of 14C‐labeled drug. Significant changes have already been made in the design of the hADME study for many companies, but opportunity exists to continue to re‐think both the design and timing of the hADME study in light of the potential offered by newer technologies, that enable flexibility in particular to reducing the magnitude of the radioactive dose used. This paper provides considerations on the variety of current strategies that exist across a number of pharmaceutical companies and on some of the ongoing debates around a potential move to the so called "human first/human only" approach, already adopted by at least one company. The paper also provides a framework for continuing the discussion in the application of further shifts in the paradigm. [ABSTRACT FROM AUTHOR]

The incineration of high‐moisture solid residues generated at the recycling paper mills represents an energetically unfavourable method of resource utilization. Alternatively, hydrothermal pre‐treatment is considered. In this study, low‐value paper sludges from three different recycling streams were hydrothermally carbonized at 205, 225, and 245°C for 3 h. The raw feedstocks and derived hydrochars were analyzed for energy properties, chemical characteristics, surface morphology, functional groups, and combustion performance employing energy densification and mass yield quantification, scanning electron microscopy, elemental analyzer, Fourier‐transform infrared spectroscopy, and thermogravimetry. The increase in reaction temperature was reported to cause a decrease in mass yield and an increase in energy densification and calorific values corresponding to 5.98%–49.35% and 10.10%–58.51% for raw fibre rejects and final sludge‐derived hydrochar, respectively. Hydrothermal carbonization (HTC) had a non‐significant influence on the energy densification of primary clarifier sludge‐derived hydrochar. Higher reaction temperatures favoured the rate of dehydration and decarboxylation, leading to hydrochars with lower H/C and O/C ratios, thereby enhancing the overall fuel properties. The low‐nitrogen and low‐sulphur fuels obtained validated the effectiveness of HTC treatment to produce high‐quality cleaner solid fuel. The burnout temperature was mostly reduced with an increase in HTC temperature. At HTC‐205 and 225°C, the ignition temperature and the combustion performance increased as a result of the HTC reaction mechanisms. HTC effectively recovered hydrochar with increased carbon content, improved energy densification, and good combustion adequacy. Hydrochar derived from recycling mills may play a role in the energy sector as a substitute for coal or in co‐combustion at coal‐fired power plants. [ABSTRACT FROM AUTHOR]

Pulp and paper companies are characterized by high‐energy consumption and high‐emission in production, placing a heavy burden on the environment. Exploring ways to improve their environmental performance is urgently needed. External coercive pressure from environmental law and internal proactive environmental strategy both enable companies to perform better, but little is known about the difference between them. To close this knowledge gap, our analysis is conducted on a case company in pulp and paper industry to compare the differential impacts of the New Environmental Protection Law of China and the proactive environmental strategy on its environmental performance. In addition, accurately evaluating the environmental performance of pulp and paper companies is essential while research on this topic is scant. Therefore, a novel environmental performance evaluation system for pulp and paper companies (EPESPP) is constructed, including not only internal but also external evaluation indexes based on news reports of various media measured by SNOWNLP sentiment analysis. According to the system, the environmental performance of the case company from 2010 to 2018 is evaluated by the entropy‐weight‐based catastrophe progression method (EWCPM). The results of our case study show that the implementation of a proactive environmental strategy is more conducive to comprehensively improving corporate environmental performance. In other words, the driving effect of the New Environmental Protection Law is not as strong as that of the proactive environmental strategy. [ABSTRACT FROM AUTHOR]

Epoxy‐impregnated paper transformer bushings are prone to water absorption due to the presence of water‐attracting moieties in the cellulose chemical structure and epoxy resin, leading to moisture‐induced insulation defects. To understand the mechanism of moisture's impact on epoxy‐impregnated paper, this study developed a testing platform that integrated moisture diffusion, adsorption, and dielectric properties of insulating materials. Insulation specimens made of epoxy resin and epoxy‐impregnated paper were prepared and their water diffusion characteristics were investigated using the Fick diffusion model and the Langmuir model, respectively. The Guggenheim–Anderson–de Boer equation was used to examine the vacuum vapour adsorption characteristics of the materials, providing a theoretical foundation for examining the form of water present within them. The dielectric response of materials with varying moisture levels was then tested to study the effect of water on the dielectric spectrum curve. Using the Extended Derivative Method, the characteristic frequency reflecting the water content of the epoxy‐impregnated paper was extracted. The results demonstrate that 0.01‐Hz characteristic frequency provides superior accuracy for moisture assessment in epoxy resins compared to 50 Hz, and extracting and fitting the relaxation peak characteristic frequency in epoxy‐impregnated paper moisture evaluation yields higher accuracy than using tan δ at the power frequency. [ABSTRACT FROM AUTHOR]

Paper flowers are frequently, for example as indoor decorations and in wedding bouquets. But these traditional paper flowers can only maintain static conditions, greatly affecting their sensory effects, vividness, and appreciation. The design of novel paper flowers with dynamic shape deformation could effectively broaden the application of paper flowers. Here, inspired by Chinese calligraphy, a novel polyvinyl butyral (PVB)/carbon/cellulose composite (PCC) magic paper with a sandwiched structure is prepared. The hygroscopicity difference between hydrophobic PVB and hydrophilic cellulose layer endows the PCC paper with humidity responsiveness, and the maximum bending angle is up to 91.4° upon exposure to humidity environment. Carbon in the interlayer with strong light–heat conversion capacity could further accelerate water desorption and deformation speed, resulting in highly sensitive light responsiveness. The recovery time of PCC paper from maximum bending to the original flat state is shorter than 1 s. The PCC paper has good flexibility and processability, which can be cut and assembled into flowers with different shapes, and these unique magic flowers could freely bloom and furl upon external stimulus. All these results indicate that PCC paper has great potential in the production of magic props, artworks, and intelligent household decorations fields. [ABSTRACT FROM AUTHOR]

Reported herein is an economical, plastic‐ and fluorine‐free coating approach for oil and water repellent paper substrates using blends of poly(vinyl alcohol) and chitosan‐graft‐polydimethylsiloxane copolymer. The obtained coated paper showed good water‐resistance, as evidenced by its low Cobb60 values of ~20 ± 2.1 g/m2 and high water contact angles of 119 ± 6.3 °. The kit rating of the coated paper was 7.6/12, indicating decent grease‐resistant properties as compared to the kit value of 0/12 for the uncoated paper. The coated paper is also repulpable as demonstrated by the complete washing off the coating from the coated paper. Giving the cost‐effective nature of the coating materials and good water and oil‐resistant properties of the coated paper, the approach developed here is commercially viable, and will offer a multitude of environmental benefits such as the elimination of microplastic‐ and PFAS problems associated with existing paper coatings. [ABSTRACT FROM AUTHOR]

Microfluidic free‐flow electrophoresis (μ‐FFE) is widely used for continuous separation of charged analytes. However, μ‐FFE is limited in the separation of analytes with the same electrophoretic mobility. In this work, we developed a novel microfluidic free‐flow paper electrochromatography (μ‐FFPE) by combining μ‐FFE with filter paper‐based chromatography, enabling continuous separation of analytes through the mechanism of both μ‐FFE and paper chromatography. Numerical simulation was applied to demonstrate the advantages of adding filter paper as the stationary phase of μ‐FFE. With the filter paper, a more stable separation system was achieved. The device was applied to the separation of simple mixtures of dyes and complex mixtures of glycans. With the μ‐FFPE fractionation, much more glycans and glycan types can be identified by LC‐MS, demonstrating the value of the method in biological analysis. The μ‐FFPE can provide a new platform for the separation and analysis of various biological molecules. [ABSTRACT FROM AUTHOR]

Abstract: Previously unreported line patterns visible under ultraviolet light were observed on a proportion of plain white A4 printer/copier paper from different manufacturers. These Ultraviolet Line Patterns (UVLPs) usually appear as stripes down the vertical length of the paper. Typically, the UVLPs were found to “repeat” through the ream in a predictable way, while also changing. It is postulated that the repeating nature of the UVLPs is a result of the way that paper is manufactured. This leads to the ability to sequence the sheets compared to their original source paper. Even in the absence of UVLPs, it is possible to use our observation of the manufacturing process to anticipate the order of several sheets of paper and conclusively associate them, in some cases, by physically fitting their machine cut edges and crossing paper fibers. Such a novel approach to examining questioned documents would be highly useful in forensic casework. [ABSTRACT FROM AUTHOR]

Korean traditional paper known as Hanji is coupled with Ag nanowires (NWs) to be used as multi‐functional paper windows in wooden flame doors of a traditional Korean house (Hanok). The Ag NW is uniformly embedded in a handmade Hanji, consisting of multiple laminated sheets formed through ssangbal filtering up and spray method. The combination demonstrates a low sheet resistance of 28 Ohm square−1 because of a percolating network structure of Ag NWs, which is apt for interconnectors and electrodes. Owing to the flexibility of the Hanji and Ag NWs, outstanding mechanical flexibility, apt for curved or flexible electronic paper windows, is observed. To further examine the potential of the multi‐functional electronic paper window, anti‐bacterial and electromagnetic interference shield properties of the Hanji are also investigated. It is noted that the functional Hanji sterilizes 99.9% of staphylococcus aureus and Klebsiella pneumonia and shows 15 dB (12–18 GHz) shielding efficiency due to the existence of the metallic Ag NWs network. In addition, successful operation of Hanji‐based interconnectors, thin film heaters, and touch panels demonstrates that the Hanji‐based electronic paper window can be used as a device‐integrated paper window in traditional Hanok or oriental traditional houses. [ABSTRACT FROM AUTHOR]

Background: Total paper dust exposure has been associated with respiratory problems among workers in the soft tissue paper industry. However, a comprehensive job exposure matrix (JEM) has not been developed for application to this industry. Our study was intended to address this need and to support further studies of mortality and morbidity in a cohort of Swedish workers from this industry., Methods: We evaluated four participating soft tissue paper mills in Sweden. We combined information on process and equipment status from the mills with knowledge of the mills obtained through research efforts and paper dust measurements made at all four mills to develop a semi-quantitative JEM with seven dust exposure levels. The JEM was targeted at workers enrolled into a soft tissue paper mill cohort and working any time between 1960 and 2009., Results: The JEM includes a total of 14 421 cells, with each cell corresponding to the exposure for a job title, department, or work location for a one-year period. Exposure levels in the JEM were estimated to decline at three of the four mills from 1971 to 2009, but overexposures (ie, exceedances of the relevant occupational exposure limits) remained common at the end of the period., Conclusions: The JEM results highlight the need for ongoing exposure control efforts in the soft tissue paper industry, and will inform ongoing epidemiological studies of the health effects of exposure to paper dust in Sweden. It is freely available for use by other researchers., (© 2020 Wiley Periodicals, Inc.)

The need for disposable, simpler, and accurate paper‐based analytical devices represents an open research field that is focused on simpler fabrication methods. To achieve this, four feasible methodologies are proposed for the direct printing of an electrochemical sensor on a biodegradable paper substrate using commercial gold and silver inks, which are compatible with inkjet printing technology. Four substrate treatment strategies are evaluated: printing the active elements directly on the hydrophilic bare paper, a hydrophobic gas‐phase coating over all the substrate, a hydrophobic silane ink that is selectively printed on the paper, and a hydrophobic coating that is selectively printed and blocks the surface porosity. Thanks to the ability of the inks to conform the cellulose fibers, the resulting working electrodes tune their electrochemical active area, showing higher active electrochemical areas when the roughness is increased. The most planar consideration is achieved blocking the paper porosity with SU‐8 and the direct printing on bare paper maximizes the electrochemical response with the smallest geometric area, with current values 2.7‐times higher than the theoretical one. Although all methods allow a functional electrochemical sensor, the highest reproducible results are accomplished with the blocked paper, consequently allowing a higher controlled and robust manufacturing approach. [ABSTRACT FROM AUTHOR]

Annually on 1 January, Japan's efficient postal system circulates 2.5 billion New Year cards to arrive simultaneously in every home in the country. Based on ethnographic fieldwork around Osaka, this article investigates the continued popularity of this exchange of paper forms in an age of smartphones and fast internet connections. Extending recent anthropological scholarship about digital data, I argue that these seemingly trivial cards have transformative potential. They are active, potent participants in the cultivation, accumulation, and ongoing care of multiple networks of social, economic, and spiritual relationships. Through an analysis of the material and aesthetic qualities of the cards, I highlight how their front‐back design embodies co‐existing, but contrasting, dimensions of Japanese relations along a qualification‐quantification and personalization‐standardization axis. The cards also produce depth and scale by linking intimate, domestic concerns with larger political and economic interests, while weaving together multiple temporal dimensions. Ultimately, they exemplify how the manipulation of surfaces can have profound cosmological consequences. These cards possess a spiritual and social potency that generates an all‐encompassing, intimate closeness that yearly rejuvenates society by reconstituting individuals as part of the whole. [ABSTRACT FROM AUTHOR]

Decision prediction based on neurophysiological signals is of great application value in many real‐life situations, especially in human–AI collaboration or counteraction. Single‐trial analysis of electroencephalogram (EEG) signals is a very valuable step in the development of an online decision‐prediction system. However, previous EEG‐based decision‐prediction methods focused mainly on averaged EEG signals of all decision‐making trials to predict an individual's general decision tendency (e.g., risk seeking or aversion) over a period rather than on a specific decision response in a single trial. In the present study, we used a rock–paper–scissors game, which is a common multichoice decision‐making task, to explore how to predict participants' single‐trial choice with EEG signals. Forty participants, comprising 20 females and 20 males, played the game with a computer player for 330 trials. Considering that the decision‐making process of this game involves multiple brain regions and neural networks, we proposed a new algorithm named common spatial pattern‐attractor metagene (CSP‐AM) to extract CSP features from different frequency bands of EEG signals that occurred during decision making. The results showed that a multilayer perceptron classifier achieved an accuracy significantly exceeding the chance level among 88.57% (31 of 35) of participants, verifying the classification ability of CSP features in multichoice decision‐making prediction. We believe that the CSP‐AM algorithm could be used in the development of proactive AI systems. [ABSTRACT FROM AUTHOR]

Menopause marks the end of menstrual cyclicity and, depending on individual vulnerability, has several consequences related to gonadal steroid deprivation, especially if it is premature. Menopause may be more burdensome for some women than for others. Individual factors, such as personal history, socioeconomic status, ethnicity, and current health conditions, affect symptomatology and, thereby, the menopausal experience. In addition, some menopausal symptoms, such as severe hot flashes, sleep disorders, and depression, are markers of future health risks. Counseling is a fundamental part of health care in the peri‐ and postmenopause periods. It must include an assessment of the patient's symptoms, needs, desires, and risk profile to address the benefits and risks of menopausal hormone therapy (MHT) on an individual basis and promote a healthy lifestyle. Indeed, healthcare practitioners can and must protect the health and lives of mid‐life women by increasing awareness of menopausal symptoms and ensuring healthcare options, especially MHT. The type and duration of MHT should be tailored based on the patient's history, menopausal age, physical characteristics, and current health status so that the benefits always outweigh the risks. This FIGO position paper focuses on the benefits and risks of MHT on health domains, target organs, and systems, and on systemic and vaginal MHT regimens, to provide indications that can be used in the clinical practice for menopausal counseling. Moreover, it offers insights into what FIGO considers the mainstay for the healthcare management of women in peri‐ and postmenopause, worldwide. Synopsis: The increase in life expectancy has made post‐reproductive health a global priority. Counseling on the benefits and risks of menopausal hormone therapy and lifestyle education is fundamental. [ABSTRACT FROM AUTHOR]

The increasing use of digital technologies has implications for reading. Online and on‐screen reading often consist of engaging with multiple, short, multimedia snippets of information, whereas longform reading is in decline. Meta‐analyses have identified a screen inferiority when reading informational texts, but not narrative texts. The mode effect is explained by reference to the Shallowing Hypothesis, postulating that increased screen reading leads to a propensity to skim and scan rather than carefully read, since digital reading material is typically composed of short, decontextualized snippets of multimedia content rather than long, linear, texts. Experiments have found support for the Shallowing Hypothesis when reading expository/informational texts, but the impact of increased habituation to screens on, specifically, literary reading, is largely unknown. It is plausible that shallow modes of reading, prompted by increased screen use, may compromise one's capacity to engage deeply with literary texts and, in turn, negatively affect readers' motivation and inclination to engage in slower, more reflective, and more effortful reading. This article presents the results from three experiments exploring associations between reading behavior, medium preferences, and the reading of a short literary text on paper versus screen. Although mixed, the results revealed an overall pattern for the role of medium: more frequent reading of short texts on screen predicted less inclination to muster the cognitive persistence required for reading a longer text, and engage in contemplation on the deeper and personally relevant meaning of the literary text. Educational implications of these findings are discussed. [ABSTRACT FROM AUTHOR]

Over one-quarter of women in the UK have a caesarean birth (CB). More than one in 20 of these births occurs near the end of labour, when the cervix is fully dilated (second stage). In these circumstances, and when labour has been prolonged, the baby's head can become lodged deep in the maternal pelvis making it challenging to deliver the baby. During the caesarean birth, difficulty in delivery of the baby's head may result - this emergency is known as impacted fetal head (IFH). These are technically challenging births that pose significant risks to both the woman and baby. Complications for the woman include tears in the womb, serious bleeding and longer hospital stay. Babies are at increased risk of injury including damage to the head and face, lack of oxygen to the brain, nerve damage, and in rare cases, the baby may die from these complications. Maternity staff are increasingly encountering IFH at CB, and reports of associated injuries have risen dramatically in recent years. The latest UK studies suggest that IFH may complicate as many as one in 10 unplanned CBs (1.5% of all births) and that two in 100 babies affected by IFH die or are seriously injured. Moreover, there has been a sharp increase in reports of babies having brain injuries when their birth was complicated by IFH. When an IFH occurs, the maternity team can use different approaches to help deliver the baby's head at CB. These include: an assistant (another obstetrician or midwife) pushing the head up from the vagina; delivering the baby feet first; using a specially designed inflatable balloon device to elevate the baby's head and/or giving the mother a medicine to relax the womb. However, there is currently no consensus for how best to manage these births. This has resulted in a lack of confidence among maternity staff, variable practice and potentially avoidable harm in some circumstances. This paper reviews the current evidence regarding the prediction, prevention and management of IFH at CB, integrating findings from a systematic review commissioned from the National Guideline Alliance., (© 2023 Royal College of Obstetricians and Gynaecologists.)

Irma Weinberg, a German-Jewish Neuropsychiatrist/Physician, authored the fourth report from the German Research Institute for Psychiatry in Munich examining the risk for dementia praecox (DP) in particular relatives of DP probands, here first-cousins. She examined 977 cousins of 54 DP probands and found a best-estimate risk of 1.4%. She conducted within-study analyses, showing a much higher risk for DP in the siblings than cousins of DP probands. She studied DP-related personalities showing a familial link between these conditions and risk for DP. She demonstrated that the risk for DP in cousins was impacted substantially by the distribution, in ancestors, of psychosis and personality abnormalities. After completing work on this article, Weinberg worked in private practice in Frankfurt, emigrating to the Netherlands in 1934, where she worked at a Jewish psychiatric hospital. In 1943, German occupiers evacuated the hospital, transporting the patients and staff, either directly to Auschwitz or, like Weinberg, to the Westerbork transit camp. On September 4, 1944, Dr. Weinberg was transported to Theresienstadt and soon thereafter to Auschwitz, where she was murdered at the age of 53. Her history raises painful questions about the relationship between genetic studies of psychiatric illness in prewar Germany and the Holocaust., (© 2023 The Authors. American Journal of Medical Genetics Part B: Neuropsychiatric Genetics published by Wiley Periodicals LLC.)

The application of traditional cellulosic paper is limited because of its flammability, so it is necessary to explore new materials that can be used in the field of flame‐retardant paper. Based on the synergistic effect between fibers, flame‐retardant lyocell (FRL) and calcium alginate (FRL/Ca‐Alg) composite paper is prepared by a simple but efficient method. The thermal degradation process of the composite paper is analyzed by thermogravimetric (TG) and TG analysis coupled with Fourier transform infrared, the flame retardancy of the composite paper is analyzed by vertical flammability (VF) tests, limiting oxygen index test and cone calorimetry test, and the morphology of the residue after VF tests is observed by scanning electron microscopy. It is found that, the Ca‐Alg releases a large amount of CO2 before ignited, which delayed the ignited time of the composite paper; FRL reduces the effective combustion heat of composite paper during combustion, and the compact char formed by FRL effectively inhibits the smoldering of Ca‐Alg in the end stage of combustion. Based on these, the synergistic flame‐retardant effect of composite paper is proposed. [ABSTRACT FROM AUTHOR]

Controlled tailoring of mechanical property and wettability is important for designing various functional materials. The integration of these characteristics with waste materials is immensely challenging to achieve, however, it can provide sustainable solutions to combat relevant environmental pollutions and other relevant challenges. Here, the strategic conversion of discarded and valueless waste paper into functional products has been introduced following a catalyst‐free chemical approach to tailor both the mechanical property and water wettability at ambient conditions for sustainable waste management and controlling the relevant environmental pollution. In the current design, the controlled and appropriate silanization of waste paper allowed to modulate both the a) porosity and b) compressive modulus of the paper‐derived sponges. Further, the association of 1,4‐conjugate addition reaction between amine and acrylate groups allowed to obtain an unconventional waste paper‐derived chemically 'reactive' sponge. The appropriate covalent modification of the residual reactive acrylate groups with selected alkylamines at ambient conditions provided a facile basis to tailor the water wettability from moderate hydrophobicity, adhesive superhydrophobicity to non‐adhesive superhydrophobicity. The embedded superhydrophobicity in the waste paper‐derived sponge was capable of sustaining large physical deformations, severe physical abrasions, prolonged exposure to harsh aqueous conditions, etc. Further, the waste paper‐derived, extremely water‐repellent sponges and membranes were successfully extended for proof‐of‐concept demonstration of a practically relevant outdoor application, where the repetitive remediation of oil spillages has been demonstrated following both selective absorption (25 times) of oils and gravity‐driven filtration‐based (50 times) separation of oils from oil/water mixtures at different harsh aqueous scenarios. [ABSTRACT FROM AUTHOR]

SCORE was introduced as a spectral approach to network community detection. Since many networks have severe degree heterogeneity, the ordinary spectral clustering (OSC) approach to community detection may perform unsatisfactorily. SCORE alleviates the effect of degree heterogeneity by introducing a new normalization idea in the spectral domain and makes OSC more effective. SCORE is easy to use and computationally fast. It adapts easily to new directions and sees an increasing interest in practice. In this paper, we review the basics of SCORE, the adaption of SCORE to network mixed membership estimation and topic modeling, and the application of SCORE in real data, including two datasets on the publications of statisticians. We also review the theoretical "ideology" underlying SCORE. We show that in the spectral domain, SCORE converts a simplicial cone to a simplex and provides a simple and direct link between the simplex and network memberships. SCORE attains an exponential rate and a sharp phase transition in community detection, and achieves optimal rates in mixed membership estimation and topic modeling. [ABSTRACT FROM AUTHOR]

Polistes dominula is an invasive social wasp that preys on the grasshopper Dichroplus elongatus, which constitutes a potential agricultural pest in Northwest Patagonia. This grasshopper feeds on a wide variety of plants, the 'Dandelion' (Taraxacum officinale) being one of the main food resources. In this study, by means of a Y‐tube olfactometer, we analysed the use of olfactory cues by P. dominula in the detection of grasshoppers. Specifically, we evaluated the attractiveness of live grasshoppers, their traces (i.e. leaves with herbivory traces + prey faeces or only faeces) and herbivory‐free leaves. The results showed that foragers equally chose olfactory cues emitted by grasshoppers and leaves with herbivory traces + faeces and herbivory‐free leaves, suggesting that the leaves of the host plant also have an important role in the searching behaviour. The current research is the first to demonstrate that the invasive paper wasp orients its search towards either the presence of grasshopper prey or the volatiles of plant leaves. These findings shed new light on predator‐prey interactions mediated by olfactory cues in P. dominula, which may play a biological role as a natural controller of D. elongatus, phytophagous pest in the invaded ecosystems. [ABSTRACT FROM AUTHOR]

Background: Re‐use of wastes as a part of sustainable development is one of the most important aspects of a healthy human life and environmental protection. This study examines the viability of using paper industry slag for the production of building ceramics. Results: Paper industry slag was used in the production of ceramic bricks as a burnable additive in amounts of 5, 10 and 15 wt%. The slag was introduced without and after three different preparatory operations: dried, dried and ground, granulated and dried. Clay was used as a raw material and quartz sand as a lean additive. The samples were made by plastic molding. Drying was carried out at a temperature of 100 °C. To determine the optimal heat treatment temperature, firing was carried out at 900, 950, 1000 and 1050 °C with holding at the maximum temperature for 30 min, followed by determination of the properties of the samples. Conclusions: It has been established that the samples obtained using the slag have good physical and mechanical properties and comply with current standards. At the same time, the use of slag in the production of ceramic bricks makes it possible to solve the problem of waste management, as well as to obtain a secondary material resource from the slag – a burnable additive, which leads to savings in raw materials and energy resources in the production of ceramic bricks. © 2022 The Authors. Journal of Chemical Technology and Biotechnology published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry (SCI). [ABSTRACT FROM AUTHOR]

Paper‐based microfluidics emerges as an innovative platform for constructing miniaturized electrochemical devices, which mainly benefit from the spontaneous capillary action of paper. Nevertheless, the capillary‐driven flow dynamics on paper are determined exclusively by the intrinsic properties of paper and fluidics, thus lacking the controllability that conventional pump‐based microfluidics can provide. Herein, an approach to regulating the capillary flow on paper is introduced by conjugating the outlets of microfluidic channels with a photothermal module for water evaporation. The capillary flow rate on paper can be handily regulated from 4 to 37 µL min−1 under controllable illumination conditions. As a proof‐of‐concept, prototypical paper‐based microfluidic fuel cells integrated with the photothermal module are constructed. Their peak power density can be boosted from 0.3 up to 2.1 mW cm−2 under the simulated sunlight irradiation. The influence of capillary flow rate on the fuel cell performance is further validated using multiphysics simulations. The present work not only provides a practically feasible method to boost the performance of paper‐based microfluidic fuel cells using solar energy, but also opens a new avenue for modulating the performance of paper‐based microfluidics, which has long been a challenge in this field. [ABSTRACT FROM AUTHOR]

Summary: The cost‐effective strategy of using paper‐based materials as alternatives to plastics can aid in reducing environmental stress. Herein, a novel green low‐carbon paper‐based food‐packaging composite was synthesised: curcumin microcapsule‐polyvinyl alcohol/beeswax/chitosan (CURM‐PVA/BW/CS) composite papers. Scanning electron microscopy and X‐ray diffraction results confirmed that curcumin was successfully encased and adhered to the paper. The water vapour permeability and oxygen transmission rate of the composite papers were 42.28 g (m2·d)−1 and 3.41 cm3 (m2·d·atm)−1, respectively. The antioxidant capacity of paper was 93.53%, and the mechanical properties were effectively improved by adding natural antioxidants to the coating. Finally, cakes were packaged in the biodegradable 1%CURM‐PVA/BW/CS papers exhibited optimal preservation during the storage period, based on the characterisation of the cake peroxide value, acid value and microbiological count. Overall, the CURM‐PVA/BW/CS paper showed great potential for food packaging. [ABSTRACT FROM AUTHOR]

Solar-driven photothermal water evaporation is considered an elegant and sustainable technology for freshwater production. The existing systems, however, often suffer from poor stability and biofouling issues, which severely hamper their prospects in practical applications. Conventionally, photothermal materials are deposited on the membrane supports via vacuum-assisted filtration or dip-coating methods. Nevertheless, the weak inherent material-membrane interactions frequently lead to poor durability, and the photothermal material layer can be easily peeled off from the hosting substrates or partially dissolved when immersed in water. In the present article, the discovery of the incorporation of borophene into cellulose nanofibers (CNF), enabling excellent environmental stability with a high light-to-heat conversion efficiency of 91.5% and water evaporation rate of 1.45 kg m-2 h-1 under simulated sunlight is reported. It is also demonstrated that borophene papers can be employed as an excellent active photothermal material for eliminating almost 100% of both gram-positive and gram-negative bacteria within 20 min under three sun irradiations. The result opens a new direction for the design of borophene-based papers with unique photothermal properties which can be used for the effective treatment of a wide range of wastewaters. [ABSTRACT FROM AUTHOR]

PAPER SUBMISSION Authors who wish to present a paper at the Convention should submit an abstract of the proposed paper not exceeding 200 words to the conference website: http://jci.edu.my/17th-eaea-international-convention/ by B 2 May 2022 b . IMPORTANT DATES Abstract submission open: 1 April 2021 Abstract submission due: 2 May 2022 Session proposal deadline: 1 April 2022 Notification of abstract acceptance: 31 May 2022 Full paper submission due: 15 July 2022 Paper presenter registration due: 15 July 2022. Papers should be submitted in MS-Word format using English Language, Times New Roman fonts to the Program Committee via the submission portal at the EAEA17 Convention website http://jci.edu.my/17th-eaea-international-convention/. [Extracted from the article]

Renewable superhydrophobic materials have attracted great attention due to their extensive applications in the fields such as cost‐effective and biodegradable oil/water separation field. Herein, we reported an eco‐friendly and facile methodology to develop the superhydrophobic cellulosic paper by immersion method using the ethanol solution of stearic acid. Furthermore, the treated cellulosic papers showed super‐hydrophobicity with water contact angle (WCA) above 153°. Interestingly, this method can realize superhydrophobic‐hydrophilic conversion by simply adjusting the temperature and is amenable for different substrates and with the WCA of 114‐162°. More importantly, the utilization of fluorinated reagents has been avoided, thereby minimizing the production cost and improving safety and environmental aspects. Meanwhile, the modified natural cellulosic paper is applied for oil–water separation, and its separation efficiency was as high as 95% after 10 cycles, indicating the good reusability of stearic acid modified filter papers. Consequently, this simple strategy based on the stearic acid immersion method thus provided an easy conversion of superhydrophobic‐hydrophilic interface and provided facile strategies for conversion of commercial quantitative filter paper to functional materials for oil/water separation. [ABSTRACT FROM AUTHOR]

The 2022 Special Educational Needs and Disability (SEND) Review in England has proposed changes to the way in which SENCos are trained before working in English schools. Although the DfE collects data relating to the demographics of all teachers, the 2022 SEND Review Green Paper does not draw on this to support or inform the changes being proposed. A Freedom of Information request was made to the DfE, from which actual data could be acquired, with breakdowns by age, gender, qualifications and leadership status. The data describe a teacher who is still more likely to be female and approaching the middle of their career. Most SENCos are still on the class teacher pay scale rather than the leadership scale, with a minority holding a Master's‐level qualification. The DfE does not have an accurate overview of how many teachers hold the current SENCo qualification. The article provides a number of recommendations to policymakers based on the data provided. [ABSTRACT FROM AUTHOR]

The data paper is an emerging academic genre that focuses on the description of research data objects. However, there is a lack of empirical knowledge about this rising genre in quantitative science studies, particularly from the perspective of its linguistic features. To fill this gap, this research aims to offer a first quantitative examination of which rhetorical moves—rhetorical units performing a coherent narrative function—are used in data paper abstracts, as well as how these moves are used. To this end, we developed a new classification scheme for rhetorical moves in data paper abstracts by expanding a well‐received system that focuses on English‐language research article abstracts. We used this expanded scheme to classify and analyze rhetorical moves used in two flagship data journals, Scientific Data and Data in Brief. We found that data papers exhibit a combination of introduction, method, results, and discussion‐ and data‐oriented moves and that the usage differences between the journals can be largely explained by journal policies concerning abstract and paper structure. This research offers a novel examination of how the data paper, a data‐oriented knowledge representation, is composed, which greatly contributes to a deeper understanding of research data and its publication in the scholarly communication system. [ABSTRACT FROM AUTHOR]

Aiming at developing an easily implementable method for on‐site analysis to detect urea adulteration in feed ingredients, a simple and inexpensive paper strip for urea detection via colorimetric assay is herein presented. The paper strip can be simply fabricated by immobilizing urease with bromothymol blue (BTB) as a pH indicator on cellulose fiber. Upon dipping the paper strip into the target sample, the release of ammonia during the reaction between urea in the sample and urease on the paper strip causes a pH change that results in the development of a blue color, thus indicating the presence of urea. A semiquantitative detection method was developed on the basis of the color change on the paper strip, which can be detected by naked eyes and compared with a color chart made by spiking urea at concentrations varying from 0.10% to 1.0% (w/w) in animal protein and fishmeal samples. Moreover, quantitative data were obtained by taking a picture with a smartphone camera and measuring the color intensity using ImageJ software. A comparison between BTB and phenol red as pH indicators revealed that the former afforded better results in terms of resolution. Under optimal conditions, good linear responses of blue intensity were obtained in a concentration range of 0.10%–1.0% (w/w). The recovery was determined to range between 98.1% and 118.3% with a relative standard deviation of <5%. The developed paper strip assay was applied to determine urea in animal protein and fishmeal, finding good agreement with the official AOAC method (No. 967.07). The present paper strip is rapid and requires neither sophisticated devices nor skilled personnel, allowing its use by quality controllers for the routine on‐site detection of the urea adulteration of raw materials. [ABSTRACT FROM AUTHOR]