Search

(Pb,La)(Zr,Ti)O3 antiferroelectric (AFE) ceramics have attracted considerable interest due to their high‐energy storage density and numerous field‐induced phase transitions. However, the positional equilibrium of the A‐site and B‐site is typically maintained without considering that heterovalent doping of La3+ can induce defects within the material, leading to high‐temperature leakage conduction. In this work, we introduced the acceptor ion Na+ at the A‐site simultaneously and designed Pb0.9175–0.5xLa0.055NaxZr0.975Ti0.025O3 (x = 0.01, 0.03, 0.055, 0.07, 0.10) AFE ceramics. The dielectric properties of these ceramics exhibited a consistent pattern of improvement followed by deterioration as the content of Na+ increased. Notably, when x = 0.055 (Na5.5), the AFE ceramic demonstrated superior high‐temperature frequency stability with negligible leakage conduction. Impedance spectroscopy analysis suggested that Na5.5 displays the greatest resistance and highest Edc. Concurrently, the thermally stimulated depolarization current indicates that Na5.5 possesses the lowest defect concentration and the largest Ea. This can be attributed to the internal generation of defect dipole clusters (VPb′′−VO••−NaPb′−LaPb•$V_{{\mathrm{Pb}}}^{{\prime\prime}} - V_{\mathrm{O}}^{ \bullet \bullet } - {\mathrm{Na}}_{{\mathrm{Pb}}}^{\prime} - {\mathrm{La}}_{{\mathrm{Pb}}}^ \bullet $), which effectively restrict the movement of charged defects. These findings suggest that Na5.5 holds significant potential for application and offer insights into the understanding of internal defects in lead‐based AFE materials. [ABSTRACT FROM AUTHOR]

(Pb, La)(Zr, Ti)O3 antiferroelectric (AFE) materials are promising materials due to their energy‐storage density higher than 10 J cm−3, but their low energy‐storage efficiency and poor temperature stability limit their application. In this paper, the (1 − x)(Pb0.9175La0.055)(Zr0.975Ti0.025)O3–xPb(Yb1/2Nb1/2)O3 (PLZTYN100x) AFE ceramics were prepared via two‐step sintering method and investigated thoroughly. With the doping of Yb3+ and Nb5+, the phase structure transforms from the orthorhombic phase (AFEO) to the coexistence of the orthorhombic‐and‐tetragonal phases. This structure reduces the free energy difference between the AFE and ferroelectric phases and reduces the fluctuation of energy with temperature, improving the energy storage efficiency and temperature stability. When the x = 0.05 (PLZTYN5), the AFE ceramic exhibits excellent temperature stability and ultrahigh energy storage performance, whose recoverable energy density (Wrec) is 6.8–8.2 J cm−3 at 30 kV mm−1 in the temperature range from −55 to 75°C, and efficiency (ƞ) is 78%–86.7%. In addition, the change of Wrec is less than 15%, exceeding the performance of most AFE ceramics. The results demonstrate that the PLZTYN5 ceramic has great potential in pulse power capacitors. [ABSTRACT FROM AUTHOR]

(Bi0.5Na0.5)TiO3 (BNT)‐based ferroelectric ceramics have drawn extensive attention because of their excellent electrical properties and interesting depolarization behavior. However, the poor thermal stability of electrical properties limits their practical application. In this work, the effect of sintering temperature (Ts) on the depolarization behavior of BNT‐based ceramics was systematically investigated. It is found that the depolarization temperature Td determined from pyroelectric measurement tends to decrease with increasing Ts, which indicates that lower Ts defers the ferroelectric‐relaxor (FE‐RE) phase transition. However, for the samples sintered at higher Ts (such as 1180°C), although the Td is reduced, the thermal stability is better compared with the sample sintered at lower Ts (1100°C) because the diffuse behavior of the FE‐RE phase transition is suppressed. According to these results, we propose that the thermal stability of electrical properties for BNT‐based ceramics is not only related to high Td, but also to the diffuse degree of phase transition. [ABSTRACT FROM AUTHOR]

Abstract: High pyroelectric performance and good thermal stability of pyroelectric materials are desirable for the application of infrared thermal detectors. In this work, enhanced pyroelectric properties were achieved in a new ternary (1−x)(0.98(Bi0.5Na0.5)(Ti0.995Mn0.005)O3–0.02BiAlO3)–xNaNbO3 (BNT–BA–xNN) lead‐free ceramics. The effect of NN addition on the microstructure, phase transition, ferroelectric, and pyroelectric properties of BNT–BA–xNN ceramics were investigated. It was found that the average grain size decreased as x increased to 0.03, whereas increased with further NN addition. The pyroelectric coefficient p at room temperature (RT) was significantly increased from 3.87 × 10−8Ccm−2K−1 at x = 0 to 8.45 × 10−8Ccm−2K−1 at x = 0.03. The figures of merit (FOMs), Fi, Fv and Fd, were also enhanced with addition of NN. Because of high p (7.48 × 10−8Ccm−2K−1) as well as relatively low dielectric permittivity (~370) and low dielectric loss (~0.011), the optimal FOMs at RT were obtained at x = 0.02 with Fi = 2.66 × 10−10 m/V, Fv = 8.07 × 10−2 m2/C, and Fd = 4.22 × 10−5 Pa−1/2, which are superior to other reported lead‐free ceramics. Furthermore, the compositions with x ≤ 0.03 exhibited excellent temperature stability in a wide temperature range from 20 to 80°C because of high depolarization temperature (≥110°C). Those results unveil the potential of BNT–BA–xNN ceramics for infrared detector applications. [ABSTRACT FROM AUTHOR]

The electrical hysteresis behaviors and energy storage performance of Pb0.97La0.02(Zr0.58Sn0.335Ti0.085)O3 antiferroelectric ( AFE) ceramics were studied under the combined effects of electric field and temperature. It was observed that the temperature dependence of recoverable energy density ( Wre) of AFE ceramics depends critically on the applied electric field. While Wre at lower electric fields (<8 kV/mm) shows increasing tendency with increasing temperature from 20°C to 100°C, Wre at higher electric fields (>8 kV/mm) demonstrates decreasing dependence. There exists an appropriate electric field (8 kV/mm) under which the AFE ceramics exhibit nearly temperature-independent Wre (the variation is less than 0.5% per 10°C). The underlying physical principles were also discussed in this study. These results indicate that the temperature dependence of Wre of AFE materials can be tuned through selecting appropriate electric fields and provide an avenue to obtain thermal stable energy storage capacitors, which should be of great interest to modern energy storage community. [ABSTRACT FROM AUTHOR]

(Bi0.5Na0.5)TiO3-BiAlO3 lead-free materials exhibit excellent ferroelectric properties, but its depolarization temperature is relatively low which is the major obstacle limiting the material's practical application. In this study, the effects of Manganese (Mn) modification on the microstructure, ferroelectric properties and depolarization behavior of 0.96(Bi0.5Na0.5)(Ti1− xMn x)O3-0.04BiAlO3 ceramics were investigated. It was found that the average grain size was enlarged and ferroelectric properties were enhanced with small Mn addition, meanwhile the tangent loss decreased. The remnant polarization ( Pr) of the samples reached an optimal value (~41 μC/cm2) as Mn content increased up to 0.7 mol%, whereas further addition resulted in the decrease in Pr. Moreover, appropriate Mn addition ( x=0.7%) can improve the depolarization temperature from 140°C to 161°C determined from thermally stimulated depolarization currents measurement. [ABSTRACT FROM AUTHOR]