Search

The electrochemical desalination technique is recognized as a promising solution to alleviate freshwater shortages, challenges yet persists in achieving optimal energy efficiency and cost‐effectiveness. Herein, a hybrid acid/alkali zinc air desalination battery (hAA‐ZADB) capable of concurrent desalination and high‐power density is reported. To improve cathodic efficiency and cost‐effectiveness, an electrocatalyst with dual atomic Fe–Mn sites on porous dodecahedral carbon (Mn‐Fe/p‐DC) is fabricated through a simple direct pyrolysis strategy for oxygen reduction reaction (ORR). The Mn–Fe/p‐DC‐900 electrocatalyst demonstrates exceptional electrocatalytic activity (E1/2 = 0.8 V in 0.5 m H2SO4) for ORR. This innovative hybrid acid/alkali cell design, coupled with advanced electrocatalysts, empowers the hAA‐ZADB system to achieve outstanding performance benchmarks with a high open circuit voltage of 2.22 V, an impressive power density of 375 mW cm−2, and notably elevated energy output of 106.9 kJ mol−1 even at a current density of 100 mA cm−2 during desalination. Distinguishing this work is its additional functionality, evident in a rapid salt removal rate of 3.64 mg cm−2 min−1 during desalination, achieving an impressive 88.67% removal of 0.6 M NaCl. This study highlights the promising potential of employing metallic air batteries for a self‐powered desalination technique applicable to specific scenarios. [ABSTRACT FROM AUTHOR]

Transition metal single atoms anchored on nitrogen‐doped carbon (M‐N‐C) matrix with M‐N‐C active sites have shown to be promising catalysts for both hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR). Herein, a hybrid catalyst with low‐level loading of atomic Pt and Co species encapsulated in nitrogen‐doped graphene (Pt@CoN4‐G) is developed. The Pt@CoN4‐G shows low overpotential for HER in wide‐pH electrolyte and manifests improved mass activity with almost eight times greater than that of Pt/C at an overpotential of 50 mV. The Pt@CoN4‐G also exhibits a top‐level ORR activity (half‐wave potential, E1/2 = 0.893 V) and robust stability (>200 h) in alkaline medium. Using theoretical calculations and comprehensive characterizations , the strong metal–support interactions between Pt species and CoN4‐G support and synergistical cooperation of multiple active sites are clarified. A flow alkali‐Al/acid hybrid fuel cell using Pt@CoN4‐G as cathode catalyst delivers a large power density of 222 mW cm−2 with excellent stability to achieve simultaneously hydrogen evolution and electricity generation. In addition, Pt@CoN4‐G endows a flow Zn‐air battery with high power density (316 mW cm−2), good stability under large current density (>100 h at 100 mA cm−2), and long cycle life (over 600 h at 5 mA cm−2). [ABSTRACT FROM AUTHOR]

Electrosynthesis of H2O2 has great potential for directly converting O2 into disinfectant, yet it is still a big challenge to develop effective electrocatalysts for medical‐level H2O2 production. Herein, we report the design and fabrication of electrocatalysts with biomimetic active centers, consisting of single atomic iron asymmetrically coordinated with both nitrogen and sulfur, dispersed on hierarchically porous carbon (FeSA‐NS/C). The newly‐developed FeSA‐NS/C catalyst exhibited a high catalytic activity and selectivity for oxygen reduction to produce H2O2 at a high current of 100 mA cm−2 with a record high H2O2 selectivity of 90 %. An accumulated H2O2 concentration of 5.8 wt.% is obtained for the electrocatalysis process, which is sufficient for medical disinfection. Combined theoretical calculations and experimental characterizations verified the rationally‐designed catalytic active center with the atomic Fe site stabilized by three‐coordinated nitrogen atoms and one‐sulfur atom (Fe‐N3S‐C). It was further found that the replacement of one N atom with S atom in the classical Fe‐N4‐C active center could induce an asymmetric charge distribution over N atoms surrounding the Fe reactive center to accelerate proton spillover for a rapid formation of the OOH* intermediate, thus speeding up the whole reaction kinetics of oxygen reduction for H2O2 electrosynthesis. [ABSTRACT FROM AUTHOR]

The development of precious‐metal alternative electrocatalysts for oxygen reduction reaction (ORR) is highly desired for a variety of fuel cells, and single atom catalysts (SACs) have been envisaged to be the promising choice. However, there remains challenges in the synthesis of high metal loading SACs (>5 wt.%), thus limiting their electrocatalytic performance. Herein, a facile self‐sacrificing template strategy is developed for fabricating Co single atoms along with Co atomic clusters co‐anchored on porous‐rich nitrogen‐doped graphene (Co SAs/AC@NG), which is implemented by the pyrolysis of dicyandiamide with the formation of layered g‐C3N4 as sacrificed templates, providing rich anchoring sites to achieve high Co loading up to 14.0 wt.% in Co SAs/AC@NG. Experiments combined with density functional theory calculations reveal that the co‐existence of Co single atoms and clusters with underlying nitrogen doped carbon in the optimized Co40SAs/AC@NG synergistically contributes to the enhanced electrocatalysis for ORR, which outperforms the state‐of‐the‐art Pt/C catalysts with presenting a high half‐wave potential (E1/2 = 0.890 V) and robust long‐term stability. Moreover, the Co40SAs/AC@NG presents excellent performance in Zn–air battery with a high‐peak power density (221 mW cm−2) and strong cycling stability, demonstrating great potential for energy storage applications. [ABSTRACT FROM AUTHOR]

Glycerol, as the major by‐product of biodiesel, can be oxidized into diverse value‐added chemical products via either traditional chemical methods or electrochemical routes. Electrocatalytic glycerol oxidation reaction (GOR) driven by renewable‐derived electricity (e.g., wind and solar) is a promising pathway for fine chemicals production. In an electrochemical cell, GOR can be coupled with various cathodic reactions, including hydrogen evolution reaction (HER), CO2 reduction reaction (CO2RR), and oxygen reduction reaction (ORR); in this manner, different benefits of either energy effectiveness or additional value‐added products can be obtained depending on the cathode reduction reaction selected. Comprehensively understanding of electrocatalytic GOR and the associated processes is of great significance to promote its industrial application. Herein, recent progress of GOR is focused on. The background of biomass‐derived glycerol valorization to energy and value‐added chemicals as well as the electrochemical conversion techniques via GOR is introduced. Then, the electrocatalytic reaction pathways, the potential application of GOR, and the measurement method for products are also discussed and summarized. Special emphasis is put on the design and the development of high‐selectivity and high‐activity electrocatalysts for GOR. Finally, the challenges and the future prospects in the fields of GOR are highlighted. [ABSTRACT FROM AUTHOR]

We report a straightforward strategy to design efficient N doped porous carbon (NPC) electrocatalyst that has a high concentration of easily accessible active sites for the CO2 reduction reaction (CO2RR). The NPC with large amounts of active N (pyridinic and graphitic N) and highly porous structure is prepared by using an oxygen‐rich metal–organic framework (Zn‐MOF‐74) precursor. The amount of active N species can be tuned by optimizing the calcination temperature and time. Owing to the large pore sizes, the active sites are well exposed to electrolyte for CO2RR. The NPC exhibits superior CO2RR activity with a small onset potential of −0.35 V and a high faradaic efficiency (FE) of 98.4 % towards CO at −0.55 V vs. RHE, one of the highest values among NPC‐based CO2RR electrocatalysts. This work advances an effective and facile way towards highly active and cost‐effective alternatives to noble‐metal CO2RR electrocatalysts for practical applications. [ABSTRACT FROM AUTHOR]

Developing efficient and low‐cost catalysts with excellent catalytic activities for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is of significance for large‐scale commercial applications in rechargeable Zn−air batteries and fuel cells. Herein, we develop a simple, mild and efficient method to synthesize a hybrid of N‐doped carbon nanosheets encapsulating cobalt nanoparticles (Co@NCNSs), which shows favorable catalytic properties toward both ORR and OER with high activity and good stability. The optimized hybrids (Co@NCNSs‐900) exhibit an onset potential of 0.95 V vs. reversible hydrogen electrode (RHE) and a half‐wave potential of 0.85 V vs. RHE for the ORR, and an onset potential of 1.51 V vs. RHE, a potential of 1.59 V vs. RHE at 10 mA cm−2 for the OER, as well as an oxygen electrode activity parameter (ΔE) of 0.802 V in alkaline electrolyte. Moreover, the Zn−air battery with the Co@NCNSs‐900 as the cathode catalyst outperforms that with the commercial Pt/C as cathode catalyst in terms of the maximum power density and stability, showing great prospects in renewable energy applications. [ABSTRACT FROM AUTHOR]

The oxygen reduction reaction (ORR), as one of the most critical but promising reactions for energy conversion, has attracted increasing research interest. Recent reports have evidenced that carbonization of heteroatoms doped porous organic polymers (POPs) is an effective approach toward highly efficient ORR electrocatalysts. We herein report a versatile ternary copolymerization strategy to synthesize stable POPs gel with tunable doping of heteroatoms (N, S, F) and Fe species, leading to significant enhancement in surface area and porosity. Carbonization of these POPs afford efficient ORR electrocatalyst with optimized composition, hierarchical porous structure and prominent catalytic activities in both alkaline and neutral conditions. The optimized catalyst (TF‐C‐900) exhibited an onset potential (Eonset) of 1.01 V and half‐wave potential (E1/2) of 0.88 V in 0.1 M KOH solution. These performance metrics are even comparable to those of the Pt/C (0.99 and 0.85). In addition, the TF‐C‐900 also showed superior stability and advantage of methanol tolerance, enabling them to be a competitive cathode electrocatalysts for alkaline fuel cell. Porous organic polymer gels synthesized via ternary polymerization were used to fabricate heteroatom‐doped catalysts for the oxygen reduction reaction and as cathode material in Zn‐air batteries. The porous structure showed prominent catalytic activity under both alkaline and neutral conditions, superior stability and advantage of methanol tolerance, enabling them to be a competitive cathode electrocatalysts for alkaline fuel cell. [ABSTRACT FROM AUTHOR]

Developing high-active, good-stable, and cost-effective electrocatalyst for oxygen reduction reaction (ORR) in all-pH medium is highly desired for the application of various fuel cell systems. Here, a network architecture hybrid with porous nitrogen-doped graphene encapsulated β-FeOOH nanoparticals (β-FeOOH/PNGNs) as ORR electrocatalyst, which exhibits remarkable enhancement ORR performance in terms of activity and stability in pHuniversal medium is reported. Systematic characterization combining with X-ray absorption fine structure analysis and the first principles simulations reveal that the as-formed surface FeO6 active sites that induced by a mass of Fe vacancies in β-FeOOH/PNGNs can significantly lower the thermodynamic barrier of the total reaction, and hence contribute to a remarkable enhancement in ORR activity. [ABSTRACT FROM AUTHOR]

It is of increasing importance to explore new low-cost and high-activity electrocatalysts for oxygen reduction reaction (ORR), which have had a substantial impact across a diverse range of energy conversion system, including various fuel cell and metal-air batteries. Although engineering carbon nanostructures have been widely explored as a candidate class of Pt-based ORR electrocatalysts owing to their proved high activity, outstanding stability, and ease of use, there still remains a daunting challenge to develop high activity metal-free electrocatalysts in pH-universal electrolyte system. Here, a reliable and controllable route amenable to prepare nitrogen-doped porous carbon (NPC) with high yields and exceptional quality is described. The as-prepared NPC shows advantages of high activity, high durability, and methanol-tolerant as an efficient pH-universal electrocatalyst for ORR, showing comparable or even better activity as compared with the commercial Pt/C catalysts not only in alkaline media but also in acidic and neutral electrolyte. Systematic electrochemical studies, combining with density functional theory calculation, demonstrate the unique nitrogen-doping species and favorable pores in the as-designed NPC synergistically contribute to the significantly improved catalytic activity in pH-universal medium. The present work potentially presents an important breakthrough in developing ORR electrocatalysts for various fuel cells. [ABSTRACT FROM AUTHOR]

A novel hybrid electrocatalyst consisting of nitrogen-doped graphene/cobalt-embedded porous carbon polyhedron (N/Co-doped PCP//NRGO) is prepared through simple pyrolysis of graphene oxide-supported cobalt-based zeolitic imidazolate-frameworks. Remarkable features of the porous carbon structure, N/Co-doping effect, introduction of NRGO, and good contact between N/Co-doped PCP and NRGO result in a high catalytic efficiency. The hybrid shows excellent electrocatalytic activities and kinetics for oxygen reduction reaction in basic media, which compares favorably with those of the Pt/C catalyst, together with superior durability, a four-electron pathway, and excellent methanol tolerance. The hybrid also exhibits superior performance for hydrogen evolution reaction, offering a low onset overpotential of 58 mV and a stable current density of 10 mA cm−2 at 229 mV in acid media, as well as good catalytic performance for oxygen evolution reaction (a small overpotential of 1.66 V for 10 mA cm−2 current density). The dual-active-site mechanism originating from synergic effects between N/Co-doped PCP and NRGO is responsible for the excellent performance of the hybrid. This development offers an attractive catalyst material for large-scale fuel cells and water splitting technologies. [ABSTRACT FROM AUTHOR]

Potassium-Ion Hybrid Capacitors: Fast Redox Kinetics in Bi-Heteroatom Doped 3D Porous Carbon Nanosheets for High-Performance Hybrid Potassium-Ion Battery Capacitors (Adv. Keywords: fast kinetics; porous carbon nanosheets; potassium-ion hybrid capacitors; sulfur and nitrogen codoped Fast kinetics, porous carbon nanosheets, potassium-ion hybrid capacitors, sulfur and nitrogen codoped. [Extracted from the article]

Potassium‐ion hybrid capacitors (PIHCs) hold the advantages of high‐energy density of batteries and high‐power output of supercapacitors and thus present great promise for the next generation of electrochemical energy storage devices. One of the most crucial tasks for developing a high‐performance PIHCs is to explore a favorable anode material with capability to balance the kinetics mismatch between battery‐type anodes and capacitor‐type cathode. Herein, a reliable route for fabricating sulfur and nitrogen codoped 3D porous carbon nanosheets (S‐N‐PCNs) is reported. Systematic characterizations coupled with kinetics analysis indicate that the doped heteroatoms of sulfur and nitrogen and the amplified graphite interlayer can provide ample structural defects and redox active sites that are beneficial for improving pseudocapacitive activity, enabling fast kinetics toward efficient potassium‐ion storage. The S‐N‐PCNs are demonstrated to exhibit superior potassium storage capability with a high capacity of 107 mAh g−1 at 20 A g−1 and long cycle stability. The as‐developed PIHCs present impressive electrochemical performance with an operating voltage as high as 4.0 V, an energy density of 187 Wh kg−1, a power density of 5136 W kg−1, and a capacity retention of 86.4% after 3000 cycles. [ABSTRACT FROM AUTHOR]

On page 872 novel nitrogen‐doped graphene/cobalt‐embedded porous carbon polyhedron hybrid electrocatalyst is obtained by Z. H. Wen, J. H. Chen, and co‐workers through a simple strategy. Benefitting from well defined structural features including excellent porous carbon structure, N/Co‐doping effect, introduction of NRGO, and good contact between N/Co‐doped PCP and NRGO sheets, the hybrid exhibits excellent tri‐functional catalytic activities for ORR, HER, and OER with long‐term stability in both acid and basic media. [ABSTRACT FROM AUTHOR]