Search

Binders play a critical role in rechargeable lithium‐ion batteries (LIBs) by holding granular electrode materials, conductive carbons, and current collectors firmly together to form and maintain a continuous electron conduction phase with sufficient mechanical strength. In the commercial LIBs, the dominant binder is polyvinylidene fluoride for the cathode (LiCoO2, LiFePO4, LiNixCotyMnzO2, etc.) and carboxyl methylcellulose/styrene‐butadiene rubber for the anode (graphite and Li4Ti5O12). However, these polymer binders have several drawbacks, particularly, a lack of electronic and lithium‐ion conductivities. Here, a novel organic/inorganic hybrid conductive binder (LAP‐rGO) for both the anode and cathode of LIBs is reported. The binder consists of 2D reduced graphene oxide sheets with anchored long alkane chains. Electrodes prepared using this binder exhibit sufficient high bond strength, fast electrolyte diffusion, high rate charge/discharge performance, and excellent cycling stability. Around 130 mAh g−1 capacity enhancement at 5C is demonstrated for LiFePO4 and Li4Ti5O12 electrodes owing to the combined improvement in electron and lithium ion transportation. LAP‐rGO bond graphite anode shows specific capacity beyond its theoretical value. Electrode slurries prepared using this new binder have superior processing and coating properties that can be prepared under a high humidity and dried using less energy. [ABSTRACT FROM AUTHOR]

As a recently emerging group of 2D materials, MXene has attracted extensive attention in the energy storage field in recent years owing to their outstanding features. However, the notorious issues of inevitable oxidation stability and surface‐to‐surface self‐restacking for MXene significantly prevent its further wide‐ranging application. Herein, the 3D macroporous oxidation‐resistant Ti3C2Tx MXene/graphene/carbon nanotube (MRC) hybrid hydrogels are prepared by a simple gelation method assisted by l‐cysteine as crosslinker and l‐ascorbic acid (VC) as reductant. Benefitting from the effectively alleviated restacking, excellent electrical conductivity, and the 3D inter‐crosslinked macroporous architecture, as a supercapacitor electrode, the obtained MRC aerogel exhibits a superior specific capacitance of 349 F g−1, unparalleled rate capability (52.0% at 3000 mV s−1) and amazing cyclic stability (retention of 97.1% after 100 000 cycles). Moreover, the 3D MRC‐30 aerogel exhibits an impressive oxidation‐resistant performance with just a 9.3% increase in electrical resistance after storing in ambient condition for 60 days, effectively alleviating the oxidation problem of MXene. This work demonstrates a new method for construction of 3D oxidation‐resistant MXene hydrogel, shedding new light on the promising applications of MXene materials, especially in high humidity and oxygen environment. [ABSTRACT FROM AUTHOR]

2D MXene materials have attracted intensive attention in energy storage application. However, MXene usually undergoes serious face‐to‐face restacking and inferior stability, significantly preventing its further commercial application. Herein, to suppress the oxidation and self‐restacking of MXene, an efficient and fast self‐assembly route to prepare a 3D porous oxidation‐resistant MXene/graphene (PMG) composite with the assistance of an in situ sacrificial metallic zinc template is demonstrated. The self‐assembled 3D porous architecture can effectively prevent the oxidation of MXene layers with no evident variation in electrical conductivity in air at room temperature after two months, guaranteeing outstanding electrical conductivity and abundant electrochemical active sites accessible to electrolyte ions. Consequently, the PMG‐5 electrode possesses a striking specific capacitance of 393 F g−1, superb rate performance (32.7% at 10 V s−1), and outstanding cycling stability. Furthermore, the as‐assembled asymmetric supercapacitor possesses a pronounced energy density of 50.8 Wh kg−1 and remarkable cycling stability with a 4.3% deterioration of specific capacitance after 10 000 cycles. This work paves a new avenue to solve the two long‐standing significant challenges of MXene in the future. [ABSTRACT FROM AUTHOR]

A fast one‐step arc discharge exfoliation method is employed to synthesize Si/graphene composites by using a graphite rod filled with a mixture of Si powder and urea as a cathode. During the arc discharge process, the use of urea allows both the introduction of nitrogen atoms into the graphene and the uniform sealing of Si nanoparticles between the thin graphene sheets to occur simultaneously. The resulting N‐doped graphene nanosheets embedded with Si (Si@NG) can act as an electrode material for lithium‐ion batteries and delivers the reversible capacity of 1030 mAh g−1 with a current density of 200 mA g−1 over 100 cycles along with an outstanding coulombic efficiency of 96.84 %. The remarkable electrochemical rate capability performance can be owed to the multiple role of NG, which not only serves as a three‐dimensional conductive support, but also effectively limits the volume variation of Si nanoparticles. The approach proposed here is expected to be extended to the preparation of other alloy anode/graphene hybrids for lithium ion batteries. [ABSTRACT FROM AUTHOR]

Polydopamine modified reduced graphene oxides (PDA‐rGO) are synthesized by a facile dopamine polymerization reaction. As‐prepared PDA‐rGO shows a capable electrochemical performance as an electrode material for supercapacitors. A capacitance of 120 F g−1 is achieved at current density of 2 A g−1. PDA‐rGO also presents a superior cycling performance with capacitance retention of ∼99% after 10000 cycles. The remarkable electrochemical performance is attributed to the addition of PDA, which prevents the stacking of rGO and enhances the wettability of composite. Meanwhile, the rGO with high conductivity promise fast electronic transport. Polydopamine modified reduced graphene oxides (PDA‐rGO) are synthesized by a facile dopamine polymerization reaction. A capacitance of 120 F g−1 is achieved at current density of 2 A g−1. PDA‐rGO also presents a superior cycling performance with capacitance retention of ∼99% after 10000 cycles. The remarkable electrochemical performance is attributed to the addition of PDA, which prevents the stacking of rGO and enhances the wettability of composite. [ABSTRACT FROM AUTHOR]