Search

The tribovoltaic effect raises an emerging semiconductor energy technology and silicon‐based tribovoltaic nanogenerator (Si‐TVNG) has aroused great attentions. However, the electrical output of Si‐TVNG is extremely unstable due to its complicated mechanism. Here, a competitive mechanism between the built‐in electric field (BEF) and the interfacial electric field (IEF) is proposed to determine the current direction and magnitude of the Si‐TVNG. The results indicate that the natural oxide layer, load pressure, and resistivity of Si significantly affect the IEF and BEF. The natural oxide layer can store surface charges by contact electrification, resulting in a IEF dominant carriers transport process. Conversely, lower resistivity and higher load pressure can reduce the contact resistance, thereby decreasing the surface charges caused by contact electrification and leading to a BEF dominant carrier transport process. This work contributes to deeper understandings of the tribovoltaic effect and further clarifies the theoretical mechanisms of carrier excitation and directional transport. [ABSTRACT FROM AUTHOR]

The tribovoltaic effect can convert semiconductor interfacial frictional mechanical energy into direct current (DC) electricity, but the flexibility and durability of semiconductor materials limit its application in wearable electronic. Herein, a robust flexible textile tribovoltaic nanogenerator is presented based on a 2D dynamic heterojunction of 2H‐MoS2/Ta4C3 (MTNG). During the friction process, a built‐in electric field (Eb) and an additional interfacial electric field (ECE) are generated in a continuous dynamic contact of 2H‐MoS2/Ta4C3, and through the 2H‐MoS2/Ta4C3 dynamic heterojunction, a significant number of electron‐hole pairs are excited and move directionally to generate a DC. The influences of mechanical pressure and sliding speed on output performance of MTNGs are systematically investigated. The MTNGs deliver excellent output power density (39.15 mW m2) and outstanding robustness (43 000 cycles). Ten MTNGs can be connected in series to obtain a DC voltage of 3.3 V and in parallel to obtain a DC current of 75 µA. Furthermore, the MTNGs can effectively power a variety of commercial electronic watches and calculators by harvesting human kinetic energy. A 2D dynamic heterojunction 2H‐MoS2/Ta4C3 DC nanogenerator is described and offers a workable option for the creation of flexible DC power sources and self‐powered wearable electronics. [ABSTRACT FROM AUTHOR]

Body area network has attracted extensive attention for its applications in athletics, medical, diagnosis, and rehabilitation training in the next generation personalized health care solutions. Here, a contact‐separation direct current triboelectric nanogenerators (CSDC‐TENGs) based self‐powered wireless body area network (SWBAN) is reported that enables multi‐joint movements monitoring for human motion. The CSDC‐TENG is designed as a flexible active sensor with an internal contact switch, and the flexible substrate makes the TENG‐sensor stick onto skin easily. Due to the internal switch, the CSDC‐TENG could generate a DC current, a large instantaneous output voltage exceeds 700 V, and an instantaneous power can reach 1.076 W, which is more than 23 000 times higher than that of the traditional contact‐separation mode TENG in same size and materials without the switch. By coupling with flexible coil, the fixed high‐frequency radio signals can be modulated and emitted clearly ranging from 6 to 16 MHz, which can be wirelessly received and demodulated through a reader. Moreover, the SWBAN is demonstrated in a real time monitoring system for joints motion. This work has realized the wearable TENG for self‐powered wireless real‐time monitoring of body movements driven by low‐frequency human daily activities, which may promote a tremendous development of intelligent healthcare, wireless sensing system and body area network. [ABSTRACT FROM AUTHOR]

A series of direct‐current tribovoltaic nanogenerators (TVNGs) with high current density have been developed for energy harvesting and mechanical sensing recently, but the lead wires that need to be connected to two relatively moving parts have greatly restricted the application of TVNG. Herein, a freestanding‐mode TVNG (FTVNG) is proposed based on metal, p‐type silicon (p‐Si), and n‐type silicon (n‐Si). As the freestanding part of metal simultaneously rubs against p‐Si and n‐Si, opposite direct current (DC) outputs can be generated, thus forming a DC output from p‐Si to n‐Si in the external circuit. Resulting from the distinctive structure, FTVNGs are applicable for harvesting energy from moving objects without attached wires. Additionally, by using steel needles to precisely control the actual contact area, the electrical output characteristics and influence laws of the tribovoltaic effect under different working parameters such as area and speed are studied. Moreover, FTVNG is integrated into the traditional rolling bearing as a triboelectric bearing, realizing energy recovery from the rotational motion of mechanical parts and speed sensing, which demonstrates the great application potential of TVNG in basic components and parts. [ABSTRACT FROM AUTHOR]

The triboelectric nanogenerator (TENG) is a new energy technology that is enabled by coupled contact electrification and electrostatic induction. The conventional TENGs are usually based on organic polymer insulator materials, which have the limitations and disadvantages of high impedance and alternating output current. Here, a tribovoltaic effect based metal–semiconductor direct‐current triboelectric nanogenerator (MSDC‐TENG) is reported. The tribovoltaic effect is facilitated by direct voltage and current by rubbing a metal/semiconductor on another semiconductor. The frictional energy released by the forming atomic bonds excites nonequilibrium carriers, which are directionally separated to form a current under the built‐in electric field. The continuous average open‐circuit voltage (10–20 mV), short‐circuit direct‐current output (10–20 µA), and low impedance characteristic (0.55–5 kΩ) of the MSDC‐TENG can be observed during relative sliding of the metal and silicon. The working parameters are systematically studied for electric output and impedance characteristics. The results reveal that faster velocity, larger pressure, and smaller area can improve the maximum power density. The internal resistance is mainly determined by the velocity and the electrical resistance of semiconductor. This work not only expands the material candidates of TENGs from organic polymers to semiconductors, but also demonstrates a tribovoltaic effect based electric energy conversion mechanism. [ABSTRACT FROM AUTHOR]

Abstract: Growing demand in automobile safety system raises a requirement to electronic devices being self‐powered, stable, and durable. Herein, a self‐powered Hall vehicle sensor (SPHVS) is demonstrated for automobile safety system, which integrates the triboelectric nanogenerator, the management circuit, the magnet, and the Hall element. The tribotronic constant current source is proposed to steadily power the Hall element in rotational motion at any different speeds. Furthermore, the performances of the SPHVS for vehicle speed sensing and vehicle braking monitoring are systematically investigated, which exhibits wide sensing range, great stability, and excellent sensitivity. This work clearly proposes a promising solution for speed sensing and braking monitoring, and indicates the potential applications of power tribotronics for the self‐powered electronic devices in prospective automobile industry. [ABSTRACT FROM AUTHOR]

Tribotronics has attracted great attention as a new research field that encompasses the control and tuning of semiconductor transport by triboelectricity. Here, tribotronics is reviewed in terms of active mechanosensation and human–machine interfacing. As a fundamental unit, contact electrification field‐effect transistors are analyzed, in which the triboelectric potential can be used to control electrical transport in semiconductors. Several tribotronic functional devices have been developed for active control and information sensing, which has demonstrated triboelectricity‐controlled electronics and established active mechanosensation for the external environment. In addition, the universal triboelectric power management strategy and the triboelectric nanogenerator‐based constant sources are also reviewed, in which triboelectricity can be managed by electronics in the reverse action. With the implantation of triboelectric power management modules, the harvested triboelectricity by various kinds of human kinetic and environmental mechanical energy can be effectively managed as a power supply for self‐powered microsystems. In terms of the research prospects for interactions between triboelectricity and semiconductors, tribotronics is expected to demonstrate significant impact and potential applications in micro‐electro‐mechanical systems/nano‐electro‐mechanical systems (MEMS/NEMS), flexible electronics, robotics, wireless sensor network, and Internet of Things. [ABSTRACT FROM AUTHOR]

Security monitoring and precaution for private information and property plays a key role in the smart home system. In this work, a triboelectric nanogenerator‐based active sliding sensor is demonstrated which can monitor the position, displacement, velocity, and direction of a contact sliding objects. The device consists of a mover and a stator which operate in sliding mode. Two aligned column arrays of copper electrodes are coated on the substrate as the mover, while two interdigitated copper electrode pairs with relative position shift are coated under a polytetrafluoroethylene film as the stator. The experimental results show that a single device can generate a voltage of about 5 V at a resistance load of 60 MΩ at a sliding velocity of 0.5 m s–1. The sliding sensor can detect an ultralow velocity in 0.001 m s–1 as well as the sliding direction of the mover. The sensor can be fixed on the drawer and door to detect the motion parameters which are sent to a remote client application for security monitoring in smart home systems. The proposed sliding sensor has great potential in the Internet of things, personal motion feature recognition, and meandering trajectory tracking. The interdigitated electrode‐based triboelectric sliding sensor (IETSS) for security monitoring can monitor the position, displacement, velocity, and direction of an in‐plane motion object. The IETSS can be fixed on the drawer and door to detect the motion parameters which are sent to a remote client application for security monitoring in smart home systems. [ABSTRACT FROM AUTHOR]

The front cover page of the journal is presented.